Charge-Carrier transport simulations in diamond detectors with electric-field-dependent mobility and charge-collection-distance-based trapping
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Charge-Carrier transport simulations in diamond detectors with electric-field-dependent mobility and charge-collection-distance-based trapping".
Mira: Here's the gist of the paper. Diamond detectors are attractive for operation in harsh radiation environments because they combine radiation tolerance, fast signal formation, and low leakage current Realistic detector-response simulations require an accurate description of charge-carrier mobility and trapping, which determine both signal amplitude and timing.
Kai: This work extends Allpix Squared with diamond-specific transport models, including field-dependent mobility parameterizations for electrons and holes and an effective trapping model based on the charge collection distance (CCD).
Mira: Modeling Charge Carrier Transport The simulation framework incorporates a drift–diffusion model that accounts for field-dependent mobility, stochastic diffusion, and trapping.
Kai: The authors use the Piecewise mobility parametrization (PW model) to describe electron drift and the Caughey–Thomas (CT) model for hole drift.
Paper summary: Kai: So, looking at "Charge-Carrier transport simulations in diamond detectors with electric-field-dependent mobility and charge-collection-distance-based trapping," what’s the overall message here about what this work actually accomplished?
Mira: The paper successfully extends the Allpix Squared framework by implementing diamond material specific transport models, specifically field dependent mobility for electrons and holes, and an effective trapping model tied to the charge collection distance.
Lev: What this means is they are providing a more realistic way to simulate detector response by incorporating these specific physics into the simulation setup itself, which is what we need when we're building error correction schemes that rely on these detectors.
Kai: So, for someone listening who doesn't work on cryogenics or quantum hardware, what’s the simplest way to understand why this matters for them?
Mira: It means they are improving the fidelity of the simulation because they are accounting for how the electric field changes movement and how far the charge travels before it gets trapped.
Lev: And that level of detail is important because it lets you predict signal loss based on physical distance rather than just assuming a fixed drift velocity, which is what we need when designing real hardware to minimize overheads.
Kai: So, to wrap up this paper, the title points to a very specific technical improvement in the simulation methodology itself. The authors are using these detailed transport models—field dependent mobility and CCD based trapping—to make their Allpix Squared simulations more accurate for diamond detectors.
Mira: And the implication is that by providing these specific transport models, they are offering a detector-level interface for users to input the charge collection distance, which helps validate how signal loss behaves in practice fourteen <ref:2603.13146#pg2>.
Lev: It’s about moving from a generic simulation to one that reflects the actual physical limitations of charge movement in diamond under an electric field.
Kai: So, this work gives us a better tool for understanding detector behavior when we're designing systems for harsh radiation environments where those accurate timing and amplitude predictions are crucial.
Conclusion: Kai: So, we’re wrapping up this look at "Charge-Carrier transport simulations in diamond detectors with electric-field-dependent mobility and charge-collection-distance-based trapping." It basically says they took a very complex simulation framework and made it specifically work for how charges move in diamond.
Mira: They extended the Allpix Squared setup by adding diamond specific models. So, they’re talking about how the electric field actually changes how fast electrons and holes drift around inside the material.
Lev: And not just that, they incorporated a trapping model based on the charge collection distance. That means you can predict signal loss based on how far the charge travels before it gets stuck somewhere.
Kai: What I find interesting is that this moves away from just assuming a fixed speed for those charges and actually models the physics of mobility and trapping directly into the simulation setup itself.
Mira: Exactly, because those assumptions are what really matter when you're trying to build something that needs to be reliable in a harsh radiation environment. The authors use things like piecewise mobility for electrons and Caughey–Thomas for holes to describe that field dependency.
Lev: For me, it means when we design error correction schemes or real hardware, the overhead calculations won't just be a simple formula; they’ll need to account for this distance-dependent trapping effect. It gets much more nuanced.
Kai: So what does this mean for the people building the detectors? They get a tool that’s much closer to reality because it accounts for those specific material properties in the charge transport.
Mira: Right, it gives them a way to validate how signal amplitude and timing are affected by those physical mechanisms before they even start fabricating anything. It grounds the simulation in actual physics.
Lev: It makes predicting performance much more reliable because you’re not relying on a generic diffusion model anymore; you’re using parameters based on the actual charge collection distance.
Kai: So, in short, this paper is giving us a more realistic way to simulate detector response by including field-dependent mobility and trapping models specific to diamond.
Mira: It’s about making those simulations accurate enough to actually guide hardware design for these tough environments. But we still have to think about the actual noise sources that affect the signal in those detectors.
Faiz Rahman Ishaqzai, Muhammed Deniz, Marta Baselga, Tobias Bisanz, Kevin Kröninger, Jens Weingarten, Ántonia Wippermann
AG Kröninger, Faculty of Physics, TU Dortmund University · Department of Physics, Dokuz Eylül University
physics.ins-det
Submitted: 2026-03-13
Updated: 2026-10-29
Comments: 14 pages, 20 figures, 1 table
Journal ref: Nuclear Instruments and Methods in Physics Research A 1094 (2027) 172164
DOI: 10.1016/j.nima.2026.172164
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 88/100
The gist: Diamond detectors are attractive for operation in harsh radiation environments because they combine radiation tolerance, fast signal formation…
Key concepts
- Field-dependent mobility parameterizations
- This describes how the speed at which electrons and holes move through the diamond material changes depending on how strong an electric field is applied. The authors use specific mathematical models, like the Piecewise mobility (PW) model for electrons and the Caughey–Thomas (CT) model for holes, to capture this physical reality.
- Charge collection distance (CCD)-based trapping
- This is a method used to simulate how long it takes for a charge carrier to be captured by a trap within the detector. The trapping probability is calculated based on the distance the charge travels before it reaches its final collection point, providing a more accurate representation of signal loss.
- Drift–diffusion model
- This is the core mathematical framework used in the simulation to describe how charges move within the detector. It accounts for three main physical processes: movement driven by an electric field (drift), random movement due to thermal energy (diffusion), and temporary capture by traps.
Terminology
Summary
Diamond detectors are attractive for operation in harsh radiation environments because they combine radiation tolerance, fast signal formation, and low leakage current Realistic detector-response simulations require an accurate description of charge-carrier mobility and trapping, which determine both signal amplitude and timing. p. 0 de
September 18, 2026
Abstract
Diamond detectors are attractive for operation in harsh radiation environments because they combine radiation
tolerance, fast signal formation, and low leakage current. Realistic detector-response simulations require an
accurate description of charge-carrier mobility and trapping, which determine both signal amplitude and
timing. In this work, we extend Allpix Squared, a modular end-to-end detector simulation framework, with
diamond-specific transport models. The implementation includes field-dependent mobility parameterizations
for electrons and holes and an effective trapping model based on the charge collection distance (CCD),
providing a detector-level interface to material quality and radiation-damage measurements.Where the paper says it
Where the paper says it
Modeling Charge Carrier Transport
The simulation framework incorporates a drift–diffusion model that accounts for field-dependent mobility, stochastic diffusion, and trapping. The authors use the Piecewise mobility parametrization (PW model) to describe electron drift and the Caughey–Thomas (CT) model for hole drift. p. 2 Based on our recent review of charge-carrier mobility in diamond, we use the Piecewise mobility parametrization (PW
model) to describe the drift of electrons [4]. For holes we use the Caughey–Thomas (CT) model [16].Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Continuous charge transport simulation for diamond detectors can be performed using Allpix Squared with field-dependent mobility models (PW model for electrons and CT model for holes) to accurately predict drift velocities and transient current signals.
-
The improved system can validate the mobility models against published reference data through three complementary approaches: time of arrival simulations, transient times, and direct comparison of simulated and measured TCT waveforms.
-
The system can incorporate material quality information by using a charge collection distance based trapping model, where
CCD is smaller than d for pcCVD diamond due to intrinsic defects in particular at grain boundaries.
-
The improved system can predict signal degradation due to radiation damage by parameterizing the CCD as a function of fluence using the relation
CCD(Φ) = 1/CCD0 + k Φ.
-
The system provides a practical detector-level interface by allowing
measured diamond-material properties to be propagated through an event-level chain comprising energy deposition, drift, diffusion, trapping, and induced-signal formation or generic propagation.
-
The system can extract charge collection distance CCD from experimental data using the formula
CCD [µm] = QMPV [fC] × 6241.5 neh,
enabling a direct link between laboratory characterization and end-to-end simulation. -
The system can analyze transient current waveforms to extract timing observables such as peak time, FWHM from the 50% level crossings, and edge-defined pulse width using methods like
the discrete analytic signal is constructed using an FFT-based Hilbert transform.
-
The system can interpret measured TCT transients in terms of the Ramo–Shockley theorem by calculating the induced current i(t) = q v(t) · Ew(x(t)), linking pulse shape deviations to
non-uniform internal fields (e.g. polarization), carrier trapping/detrapping, and velocity saturation.
Abstract
Diamond detectors are attractive for operation in harsh radiation environments because they combine radiation tolerance, fast signal formation, and low leakage current. Realistic detector-response simulations require an accurate description of charge-carrier mobility and trapping, which determine both signal amplitude and timing. In this work, we extend, a modular end-to-end detector simulation framework, with diamond-specific transport models. The implementation includes field-dependent mobility parameterizations for electrons and holes and an effective trapping model based on the charge collection distance (CCD), providing a detector-level interface to material quality and radiation-damage measurements. The mobility description is validated in the negligible-trapping limit using single-crystalline CVD diamond by comparing simulated drift velocities and transient-current signals with published reference data. For polycrystalline CVD diamond, the CCD-based trapping model is evaluated using experimentally measured CCD values and compared with laboratory transient-current-technique waveforms. The simulations reproduce the measured drift-velocity behavior in scCVD and the reduced charge collection and degraded transient response observed in pcCVD. The presented implementation enables detector-level studies of charge collection, pulse formation, and timing performance in diamond sensors using experimentally accessible transport and trapping parameters, and provides a practical framework for simulation-driven detector development and radiation-damage studies.
Related papers
- Cryogenic Mechanical Loss of GaAs/AlGaAs Crystalline Coatings
- The physical design of the superfluid helium-4 UCN source at CSNS
- A new diffuse reflector filament for additive manufacturing of 3D printing finely-segmented plastic scintillator
- Characterization of CRYO ASIC for charge readout in the nEXO experiment
- Reconstructing High-Fidelity Light Yield Maps for Surface LArTPCs Using Crossing Cosmic Muons
- OASIS-ERIS: Open Acquisition System for IEPE Sensors - Electrically Refined and Inter-device Synchronization