Charge-Carrier transport simulations in diamond detectors with electric-field-dependent mobility and charge-collection-distance-based trapping
summary
The gist
Diamond detectors are attractive for operation in harsh radiation environments because they combine radiation tolerance, fast signal formation…
In short
This work extends a detector simulation tool to accurately model charge carrier transport in diamond detectors under harsh radiation conditions. It incorporates realistic physics by using field-dependent mobility models for electrons and holes, along with a trapping mechanism based on the distance carriers travel before being captured. This allows for more precise predictions of signal amplitude and timing.
Key concepts
- Field-dependent mobility parameterizations
- This describes how the speed at which electrons and holes move through the diamond material changes depending on how strong an electric field is applied. The authors use specific mathematical models, like the Piecewise mobility (PW) model for electrons and the Caughey–Thomas (CT) model for holes, to capture this physical reality.
- Charge collection distance (CCD)-based trapping
- This is a method used to simulate how long it takes for a charge carrier to be captured by a trap within the detector. The trapping probability is calculated based on the distance the charge travels before it reaches its final collection point, providing a more accurate representation of signal loss.
- Drift–diffusion model
- This is the core mathematical framework used in the simulation to describe how charges move within the detector. It accounts for three main physical processes: movement driven by an electric field (drift), random movement due to thermal energy (diffusion), and temporary capture by traps.
Terminology used across episodes
This episode discusses
- Charge-Carrier transport simulations in diamond detectors with electric-field-dependent mobility and charge-collection-distance-based trapping · Paper Radio
The paper
Charge-Carrier transport simulations in diamond detectors with electric-field-dependent mobility and charge-collection-distance-based trapping · Read on arXiv
Faiz Rahman Ishaqzai, Muhammed Deniz, Marta Baselga, Tobias Bisanz, Kevin Kröninger, Jens Weingarten, Ántonia Wippermann
AG Kröninger, Faculty of Physics, TU Dortmund University · Department of Physics, Dokuz Eylül University
Diamond detectors are attractive for operation in harsh radiation environments because they combine radiation tolerance, fast signal formation, and low leakage current. Realistic detector-response simulations require an accurate description of charge-carrier mobility and trapping, which determine both signal amplitude and timing. In this work, we extend, a modular end-to-end detector simulation framework, with diamond-specific transport models. The implementation includes field-dependent mobility parameterizations for electrons and holes and an effective trapping model based on the charge collection distance (CCD), providing a detector-level interface to material quality and radiation-damage measurements. The mobility description is validated in the negligible-trapping limit using single-crystalline CVD diamond by comparing simulated drift velocities and transient-current signals with published reference data. For polycrystalline CVD diamond, the CCD-based trapping model is evaluated using experimentally measured CCD values and compared with laboratory transient-current-technique waveforms. The simulations reproduce the measured drift-velocity behavior in scCVD and the reduced charge collection and degraded transient response observed in pcCVD. The presented implementation enables detector-level studies of charge collection, pulse formation, and timing performance in diamond sensors using experimentally accessible transport and trapping parameters, and provides a practical framework for simulation-driven detector development and radiation-damage studies.
DOI: 10.1016/j.nima.2026.172164
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Charge-Carrier transport simulations in diamond detectors with electric-field-dependent mobility and charge-collection-distance-based trapping".
Mira: Here's the gist of the paper. Diamond detectors are attractive for operation in harsh radiation environments because they combine radiation tolerance, fast signal formation, and low leakage current Realistic detector-response simulations require an accurate description of charge-carrier mobility and trapping, which determine both signal amplitude and timing.
Kai: This work extends Allpix Squared with diamond-specific transport models, including field-dependent mobility parameterizations for electrons and holes and an effective trapping model based on the charge collection distance (CCD).
Mira: Modeling Charge Carrier Transport The simulation framework incorporates a drift–diffusion model that accounts for field-dependent mobility, stochastic diffusion, and trapping.
Kai: The authors use the Piecewise mobility parametrization (PW model) to describe electron drift and the Caughey–Thomas (CT) model for hole drift.
Paper summary: Kai: So, looking at "Charge-Carrier transport simulations in diamond detectors with electric-field-dependent mobility and charge-collection-distance-based trapping," what’s the overall message here about what this work actually accomplished?
Mira: The paper successfully extends the Allpix Squared framework by implementing diamond material specific transport models, specifically field dependent mobility for electrons and holes, and an effective trapping model tied to the charge collection distance.
Lev: What this means is they are providing a more realistic way to simulate detector response by incorporating these specific physics into the simulation setup itself, which is what we need when we're building error correction schemes that rely on these detectors.
Kai: So, for someone listening who doesn't work on cryogenics or quantum hardware, what’s the simplest way to understand why this matters for them?
Mira: It means they are improving the fidelity of the simulation because they are accounting for how the electric field changes movement and how far the charge travels before it gets trapped.
Lev: And that level of detail is important because it lets you predict signal loss based on physical distance rather than just assuming a fixed drift velocity, which is what we need when designing real hardware to minimize overheads.
Kai: So, to wrap up this paper, the title points to a very specific technical improvement in the simulation methodology itself. The authors are using these detailed transport models—field dependent mobility and CCD based trapping—to make their Allpix Squared simulations more accurate for diamond detectors.
Mira: And the implication is that by providing these specific transport models, they are offering a detector-level interface for users to input the charge collection distance, which helps validate how signal loss behaves in practice fourteen <ref:2603.13146#pg2>.
Lev: It’s about moving from a generic simulation to one that reflects the actual physical limitations of charge movement in diamond under an electric field.
Kai: So, this work gives us a better tool for understanding detector behavior when we're designing systems for harsh radiation environments where those accurate timing and amplitude predictions are crucial.
Conclusion: Kai: So, we’re wrapping up this look at "Charge-Carrier transport simulations in diamond detectors with electric-field-dependent mobility and charge-collection-distance-based trapping." It basically says they took a very complex simulation framework and made it specifically work for how charges move in diamond.
Mira: They extended the Allpix Squared setup by adding diamond specific models. So, they’re talking about how the electric field actually changes how fast electrons and holes drift around inside the material.
Lev: And not just that, they incorporated a trapping model based on the charge collection distance. That means you can predict signal loss based on how far the charge travels before it gets stuck somewhere.
Kai: What I find interesting is that this moves away from just assuming a fixed speed for those charges and actually models the physics of mobility and trapping directly into the simulation setup itself.
Mira: Exactly, because those assumptions are what really matter when you're trying to build something that needs to be reliable in a harsh radiation environment. The authors use things like piecewise mobility for electrons and Caughey–Thomas for holes to describe that field dependency.
Lev: For me, it means when we design error correction schemes or real hardware, the overhead calculations won't just be a simple formula; they’ll need to account for this distance-dependent trapping effect. It gets much more nuanced.
Kai: So what does this mean for the people building the detectors? They get a tool that’s much closer to reality because it accounts for those specific material properties in the charge transport.
Mira: Right, it gives them a way to validate how signal amplitude and timing are affected by those physical mechanisms before they even start fabricating anything. It grounds the simulation in actual physics.
Lev: It makes predicting performance much more reliable because you’re not relying on a generic diffusion model anymore; you’re using parameters based on the actual charge collection distance.
Kai: So, in short, this paper is giving us a more realistic way to simulate detector response by including field-dependent mobility and trapping models specific to diamond.
Mira: It’s about making those simulations accurate enough to actually guide hardware design for these tough environments. But we still have to think about the actual noise sources that affect the signal in those detectors.
More episodes
- 2611.14082-Two atoms with strong light-induced dipolar interactions
- 2611.14040-Characterization of BNLs 20 and 30 micrometer thick LGADs for the Electron Ion Collider
- 2611.13399-Lift-element-based dynamic network of vortex gust-airfoil interactions
- 2611.13476-Hopfion Superlattices in 3D Twisted Moir'e Light Fields
- 2611.13642-Investigation of the timing performance of double-sided p-type 3D silicon sensors produced by CNM
- 2611.13830-SiPM optical readout of a PICOSEC Micromegas precise timing detector
- 2611.14152-Where are the shortest-path nodes in spatial networks?
- 2611.14219-Sub-Ice: semi-automated mapping of basal channels from ice shelf surface elevation data
- 2611.16341-SUMNO: Spatially Unrolled Multigrid Neural Operator for Fluid Flow Surrogates
- 2611.16090-Multi-UTE Myelin Fraction Mapping: Repeatability and Cross-Field-Strength Reproducibility at 1.5T and 3T