Turbulent velocity statistics in convective boundary layers
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: We're looking at the paper: "Turbulent velocity statistics in convective boundary layers".
Mira: Here's the gist of the paper. Large-eddy simulations (LES) of the convective atmospheric boundary layer (CBL) are used to investigate velocity variance statistics in turbulent sheared convection.
Kai: These simulations span conditions from weak convection with longitudinal rolls to free penetrative convection with no mean wind.
Mira: The near-surface streamwise variance profile exhibits an approximately logarithmic decay with a slope proportional to the friction velocity, ∗, and an added constant proportional to the convective velocity, ★.
Kai: After the structural transition to convective cells, both the streamwise and spanwise variances follow the empirical stability and height dependencies of Wilson (BoundaryLayer Meteorol., 2008) <ref:2611.14805#pg3>.
Title and authors: Mira: This paper, "Turbulent velocity statistics in convective boundary layers," really dives into those statistical signatures of turbulence in the atmospheric boundary layer. It sets up a framework to track how things change when you move from one type of organization of turbulent flow to another.
Kai: I mean, they use these simulations to show that the streamwise and spanwise variances follow specific empirical rules after that structural transition happens, which is pretty neat because it links the structure back to established scaling laws like those from Wilson and Boundary Layer Meteorology.
Lev: It's interesting because for us building error correction systems, knowing how these variances scale with height—like that logarithmic decay they mention—tells us about the energy spectrum we need to handle on our real processors.
Kai: Right. They find that the near-surface streamwise variance profile drops off logarithmically, and this drop is controlled by two main things: the friction velocity, which is related to how much friction there is near the ground, and a constant term tied to the convective velocity.
Mira: And then after that structural change, both the streamwise and spanwise variances follow some specific stability dependencies based on height. It’s like they’re saying that once you get into a cell structure, the rules for how energy spreads become very predictable based on where you are in the layer.
Lev: If we were trying to run this on a real system, we'd need to make sure our simulation resolves enough of those different scales so that we can actually see that transition from rolls to cells clearly.
Kai: True. It’s not just about seeing the pattern; it’s about quantifying *why* the pattern changes based on the input parameters.
The paper's summary: Kai: So, what they summarize is that they looked at everything from weak convection with longitudinal rolls up to free penetrative convection with no mean wind, and found a consistent way to describe the velocity variance statistics across all these different regimes.
Mira: They established that the near-surface vertical velocity variance is well described by Monin–Obukhov similarity, but they also used a local-in-height scaling to get better agreement when looking at it closer to the surface.
Lev: That’s helpful because it means we don't have to guess how much buoyancy matters right at the very bottom; we can use that local scaling relationship.
Kai: And in terms of the mixed layer, they noticed a specific pattern: the peak vertical variance first drops when shear gets weaker, but then it starts increasing and shifting down as the flow moves toward that free convection state.
Mira: That shift happens because of how pressure and buoyancy interact; they attribute these statistical trends directly to how pressure contributes to the energy budget, which is a key concept for us when we look at turbulence in general.
Lev: When I look at our error correction overhead, those pressure and buoyancy terms are exactly what complicate the modeling because they introduce non-linear dependencies that might not be captured by simpler models.
Kai: So, in short, they show a consistent way to describe both the near-surface behavior and the mixed layer dynamics across different convective strengths by connecting it to these fundamental physical scales.
The paper's improvements: Mira: They suggest that using methods like Most—Monin–Obukhov similarity theory—can capture the transition in how vertical velocity variance changes from being dominated by shear to being dominated by buoyancy effects, which is a big improvement over just using one fixed scaling.
Kai: I agree. And they show that for the surface layer, while Most gives a decent qualitative picture across different stability parameters, it doesn't capture the full height dependence because there’s an extra layer of physics at play that’s separate from just the local buoyancy term.
Lev: That missing piece is what we worry about when we try to map these statistical results onto hardware; if a model misses a key height dependency, our predictions will be off by a lot at the edges of the domain.
Kai: And they also use variance budget equations to check energy pathways, and they found that the pressure-strain redistribution is what helps bring things back toward being isotropic dissipation, which is important for getting the energy balance right.
Mira: So, the paper points toward needing a more complex framework than just a simple similarity theory to get a full picture of how these statistical properties evolve as you move through different convective states.
Conclusion: Kai: Wrapping up the "Turbulent velocity statistics in convective boundary layers" paper, we see that horizontal and turbulent kinetic energy decrease relative to the scaling parameter star across all convection regimes.
Mira: The main implication is that understanding the structural shift from rolls to cells requires a model that accounts for how pressure redistributes energy to maintain some form of isotropy in dissipation.
Lev: For my work, it means when we look at predicting error growth, we need to make sure our framework handles the transition between these two organizational states correctly because that transition dictates the energy pathways.
Kai: So, even though they show a consistent way to describe these variances using those empirical stability dependencies, the paper points out that complete similarity is still limited by those underlying height dependencies.
Mira: Exactly. It's not just about finding a good scaling law; it’s about understanding the physical mechanism—the pressure redistribution—that drives the flow toward a more even distribution of energy across scales.
Lev: I think that means for future simulations, we should focus on modeling that pressure-strain correlation more accurately, because that’s where the real physics of how energy gets dissipated is happening.
Kai: So, to sum up this work on "Turbulent velocity statistics in convective boundary layers," they give us a detailed statistical map of how turbulence organizes itself in these flows and point toward the need for models that capture those fine-scale pressure effects to get a complete picture.
School of Civil Engineering, The University of Sydney · Department of Atmospheric and Oceanic Sciences, University of California, Los Angeles
physics.flu-dyn, physics.ao-ph
Submitted: 2026-11-10
Updated: 2026-11-10
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 78/100
The gist: Large-eddy simulations (LES) of the convective atmospheric boundary layer (CBL) are used to investigate velocity variance statistics in turbulent sheared convection.
Key concepts
- Streamwise Variance Profile
- This describes how the variance of the velocity component parallel to the mean wind changes with height in the boundary layer. It shows a logarithmic decay near the surface, influenced by both friction velocity (shear) and convective velocity, reflecting how turbulence scales with proximity to the ground.
- Structural Transition (Rolls to Cells)
- The flow changes its organization from organized longitudinal rolls aligned with the mean wind to more disorganized polygonal cells driven by buoyancy. This shift is a key feature in sheared convection and is associated with systematic changes in velocity statistics, indicating a reorganization of the turbulent structures.
- Variance Budget Analysis
- This technique tracks how turbulent kinetic energy is produced (by shear or buoyancy), transported vertically, redistributed by pressure, and dissipated. Analyzing these contributions helps identify the dominant physical processes driving turbulence at different flow conditions.
- Monin–Obukhov Similarity Theory (MOST)
- MOST is an empirical scaling law used to describe the vertical velocity variance near the surface. The simulations tested MOST to see if it captures the transition between shear-dominated and buoyancy-dominated scaling in neutral surface layers.
Terminology
Summary
Large-eddy simulations (LES) of the convective atmospheric boundary layer (CBL) are used to investigate velocity variance statistics in turbulent sheared convection. p. 0 heisel@sydney. au
(Received xx; revised xx; accepted xx)
Large-eddy simulations (LES) of the convective atmospheric boundary layer (CBL) are
used to investigate velocity variance statistics in turbulent sheared convection. The thirteen
simulations span conditions from weak convection with longitudinal rollsto free penetrative
convection with no mean wind. In the presence of thermal rolls, the near-surface streamwise
variance profile exhibits an approximately logarithmic decay with a slope proportional to
the friction velocity, ∗, and an added constant proportional to the convective velocity,
★. The thirteen
simulations span conditions from weak convection with longitudinal rollsto free penetrative
convection with no mean wind. In the presence of thermal rolls, the near-surface streamwise
variance profile exhibits an approximately logarithmic decay with a slope proportional to
the friction velocity, ∗, and an added constant proportional to the convective velocity,
★. In the presence of thermal rolls, the near-surface streamwise
variance profile exhibits an approximately logarithmic decay with a slope proportional to
the friction velocity, ∗, and an added constant proportional to the convective velocity,
★. After the structural transition to convective cells, both the streamwise and spanwise
variances follow the empirical stability and height dependencies of Wilson (BoundaryLayer Meteorol. These environments are
characterised by the complex interaction between wall-bounded shear turbulence and positive surface buoyancy (Moeng & Sullivan 1994; Khanna & Brasseur 1998; Salesky et al. arXiv:2611. 353–369). The near-surface vertical (wall-normal)
velocity variance is well described by Monin–Obukhov similarity with improved agreement
using local-in-height scaling. The near-surface vertical (wall-normal)
velocity variance is well described by Monin–Obukhov similarity with improved agreement
using local-in-height scaling. Within the mixed layer, the peak vertical variance initially
decreases relative to ★ as shear diminishes, before increasing and shifting downward
as the flow approaches free convection. In contrast, the total turbulent energy decreases
relative to ★ across the parameter space. The spanwise velocity variance represents the
dominant turbulent component under weak convection and exceeds the streamwise variance
throughout most of the convective regime. The spanwise velocity variance represents the
dominant turbulent component under weak convection and exceeds the streamwise variance
throughout most of the convective regime. These statistical trends are attributed to the
role of pressure, evaluated through variance budget contributions.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Structural Evolution and Scaling Transitions
The flow undergoes a transition from highly-organised longitudinal rolls aligned with the mean wind to buoyancy-driven polygonal cells <ref:2611.14805#pg3>. This topological shift from rolls to cells occurs for all sheared convection configurations, including wall-sheared Rayleigh–Benard convection and various internal flows <ref:2611. p. 1 1999; Salesky et al. The topological shift from rolls to cells
occurs for all sheared convection configurations, including wall-sheared Rayleigh–Benard ´
convection and various internal flows (Pandey et al. Throughout most of the CBL, this veering is mitigated by vertical
mixing, as seen in the figure 1(b) profiles of wind direction . To account for the mismatch
between the wind direction within the CBL and the imposed aligned with the LES grid,
the horizontal velocity components and their statistics are rotated according to the surface
wind direction in this study. Vertical profiles of the mean wind properties for each LES case in table 3 plotted as a function of
normalised height h/i: (a) magnitude; (b) direction relative to the LES grid. In all subsequent results,
the − coordinate system is aligned with the near-surface wind direction, as shown in the inset of (b), which
shows instantaneous
′
in a horizontal plane at / = 0. Vertical profiles of the mean wind properties for each LES case in table 3 plotted as a function of
normalised height h/i: (a) magnitude; (b) direction relative to the LES grid. In all subsequent results,
the − coordinate system is aligned with the near-surface wind direction, as shown in the inset of (b), which
shows instantaneous
′
in a horizontal plane at / = 0. In contrast, the total turbulent energy decreases
relative to ★ across the parameter space. The spanwise velocity variance represents the
dominant turbulent component under weak convection and exceeds the streamwise variance
throughout most of the convective regime.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Surface Layer Similarity and Vertical Response
The surface-layer variances are first examined using MOST in figure 6, where the competing effects of surface shear and buoyancy are expressed through ∗ and the Monin–Obukhov stability parameter <ref:2611.14805#pg4>. The vertical velocity variance in figure 6(c) yields a reasonable collapse of the profiles across the parameter space, indicating that MOST captures the transition in h′2i from shear to buoyancy-dominated scaling <ref:2611. p. 2 Instead, large-scale turbulent behaviour is controlled by the surface
kinematic heat flux and the CBL depth, which combine to form the convective velocity
scale ★ = (/0)
1/3
(Deardorff 1970). The balance of the shear and buoyancy velocity
scales is directly related to the bulk stability parameter as ∗/★ =
1/3
(−/)
−1/3
,
providing a direct connection between −/ and the transition in scaling of turbulent
velocities in these flows. Further aloft in the convective mixed layer where mechanical shear is negligible, h
′2
i is
characterised by the convective velocity scale ★. While h
′2
i exhibits systematic height
and stability dependence in the lower mixed layer due to the interaction of near-surface
shear and convective eddies (Khanna & Brasseur 1997, 1998), it has historically been
approximated in the outer mixed layer as a vertically uniform profile (Panofsky et al.Where the paper says it
Where the paper says it
Variance Budget Analysis and Energy Pathways
The variance budget equations are used here to assess the energy transfer pathways with changing convection. The production of turbulence by shear (P and P), buoyancy (B), vertical transport by turbulence (T) and pressure, pressure–strain correlation or redistribution by pressure (R), and SGS dissipation of turbulent energy are the factors analyzed herein. p. 0 Large-scale buoyancy
production in the mixed layer is transported downward by pressure and redistributed
preferentially to the spanwise component, coinciding with the presence of longitudinal roll
motions. The weakening of this pressure-transport pathway for convective cells coincides
with greater retention of vertical variance within the mixed layer. 24 K m s−1
across the initial shear-dominated simulations, and is subsequently held
constant at 0. 24 K m s−1
for the moderately to highly convective cases as decreases.Where the paper says it
Where the paper says it
Spectral Analysis of Energy Transfer
The co-spectrum of each budget term was evaluated from two-dimensional (2D) Fourier transforms of the horizontal fields from 60 instantaneous 3D flow volumes distributed throughout each simulation. The spectral analysis is used here to identify the dominant scales and pathways of variance production, transport, and redistribution. p. 5 This is achieved by assessing contributions to the variance
budget equations, including scale-wise spectral budgets. The budget analysis reveals
the pathways of energy as it is produced and distributed across heights and velocity
components, highlighting the important role of pressure in this process. This is achieved by assessing contributions to the variance
budget equations, including scale-wise spectral budgets. The budget analysis reveals
the pathways of energy as it is produced and distributed across heights and velocity
components, highlighting the important role of pressure in this process.Where the paper says it
Where the paper says it
Summary of Key Findings
The present study assesses turbulent velocity variances in the CBL using thirteen wallmodelled LES cases summarised in table 3. The horizontal variances and TKE progressively decrease in magnitude relative to <ref:2611.14805#pg3>. The vertical (wall-normal) variance yields better similarity with compared to the horizontal components. p. 0 353–369). The near-surface vertical (wall-normal)
velocity variance is well described by Monin–Obukhov similarity with improved agreement
using local-in-height scaling. This formulation follows the assumption
that horizontal velocity fluctuations in the surface layer are largely governed by largescale, buoyancy-driven convective structures that extend throughout the mixed layer,
rendering the boundary-layer depth
the relevant scaling parameter rather than (MOST). More recently, Wilson (2008) incorporated a power-law height dependence with the
Panofsky et al. The thirteen
simulations span conditions from weak convection with longitudinal rollsto free penetrative
convection with no mean wind. In the presence of thermal rolls, the near-surface streamwise
variance profile exhibits an approximately logarithmic decay with a slope proportional to
the friction velocity, ∗, and an added constant proportional to the convective velocity,
★. au
(Received xx; revised xx; accepted xx)
Large-eddy simulations (LES) of the convective atmospheric boundary layer (CBL) are
used to investigate velocity variance statistics in turbulent sheared convection. The thirteen
simulations span conditions from weak convection with longitudinal rollsto free penetrative
convection with no mean wind. After the structural transition to convective cells, both the streamwise and spanwise
variances follow the empirical stability and height dependencies of Wilson (BoundaryLayer Meteorol. , 2008, vol. The spanwise velocity variance represents the
dominant turbulent component under weak convection and exceeds the streamwise variance
throughout most of the convective regime. These statistical trends are attributed to the
role of pressure, evaluated through variance budget contributions. 4 is the von Karm´ an constant, ´ is gravitational acceleration, 0 is the reference
potential temperature, is the surface kinematic heat flux, and is negative for unstable
convection with positive . The global importance of shear versus buoyancy across the
entire boundary layer is typically represented by the bulk stability parameter −/, where
is the overall CBL depth. This universality suggests that these structures and their dynamical influence have
broad relevance to fundamental fluid mechanics across applications. Despite the welldocumented visual evolution of these large-scale structures, the turbulent second-order
statistics associated with these structural transitions are less well understood and agreed
upon (Salesky et al. A notable characteristic of these environments is the large-scale structural organisation
of the turbulent motions. As the relative influence of buoyancy and shear changes, the
flow undergoes a transition from highly-organised longitudinal rolls aligned with the
mean wind to buoyancy-driven polygonal cells (Sykes & Henn 1989; Khanna & Brasseur
1998; Weckwerth et al.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Appendix Details
The SGS variance estimation relies on the grid resolution being within the inertial subrange when the SGS variance is estimated, so that the unresolved energy can be extrapolated from the resolved scales using a −5/3 spectral slope <ref:2611.14805#pg5>. The cutoff height is therefore defined as the lowest height at which the total variances obtained with Δ and 1. p. 1 logarithmic
region), comprising the lowest 10% of the CBL in the high-Reynolds-numberlimit (Garratt
1992; Yaglom 1993). Accurately mapping the behaviour of the turbulence statistics across
the parameter space of sheared convection therefore requires consideration of the neutral
and free-convection limits, in addition to the constraintsimposed by the outer layer farther
from the surface. logarithmic
region), comprising the lowest 10% of the CBL in the high-Reynolds-numberlimit (Garratt
1992; Yaglom 1993). Accurately mapping the behaviour of the turbulence statistics across
the parameter space of sheared convection therefore requires consideration of the neutral
and free-convection limits, in addition to the constraintsimposed by the outer layer farther
from the surface. These environments are
characterised by the complex interaction between wall-bounded shear turbulence and positive surface buoyancy (Moeng & Sullivan 1994; Khanna & Brasseur 1998; Salesky et al. arXiv:2611. These environments are
characterised by the complex interaction between wall-bounded shear turbulence and positive surface buoyancy (Moeng & Sullivan 1994; Khanna & Brasseur 1998; Salesky et al. arXiv:2611. For computing statistics as a function of
★, the local-in-time statistics
were first interpolated onto a common / grid before averaging the statistics across time. Subgrid-scale variance statistics
The SGS model of the LES solver does not directly estimate the SGS variance (i. For computing statistics as a function of
★, the local-in-time statistics
were first interpolated onto a common / grid before averaging the statistics across time. Subgrid-scale variance statistics
The SGS model of the LES solver does not directly estimate the SGS variance (i.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Acknowledgements and Funding
The authors acknowledge the high-performance computing resources provided by the Sydney Informatics Hub, a Core Research Facility of the University of Sydney, and the National Computational Infrastructure (NCI Australia), which is supported by the Australian Government. p. 0 Fluid Mech. Banner appropriate to article type will appear here in typeset article
Turbulent velocity statistics in convective boundary
layers
Aditya Chaudhary1
, Marcelo Chamecki2 and Michael Heisel1
1School of Civil Engineering, The University of Sydney, NSW 2008, Australia
2Department of Atmospheric and Oceanic Sciences, University of California, Los Angeles, CA, USA
Corresponding author: Michael Heisel, michael. 2017; Zhou et al. Further, the exact physical mechanisms
by which turbulent kinetic energy (TKE) is produced, redistributed among the velocity
components, and dissipated as the flow reorganises remain an active area of research
(Ding et al. The numerical discretisation and boundary
conditions remain consistent to ensure statistical fidelity. The LES flow solver and numerical methods used in this study are described by
Heisel & Chamecki (2024) and are based on a modified version of the code developed by
Albertson and co-authors (Albertson 1996; Albertson & Parlange 1999; Porte-Agel ´ et al. The numerical discretisation and boundary
conditions remain consistent to ensure statistical fidelity. The LES flow solver and numerical methods used in this study are described by
Heisel & Chamecki (2024) and are based on a modified version of the code developed by
Albertson and co-authors (Albertson 1996; Albertson & Parlange 1999; Porte-Agel ´ et al.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
References
Albertson, J. D. 1996 Large eddy simulation of land-atmosphere interaction <ref:2611. p. 0 These environments are
characterised by the complex interaction between wall-bounded shear turbulence and positive surface buoyancy (Moeng & Sullivan 1994; Khanna & Brasseur 1998; Salesky et al. arXiv:2611. Extensive experimental and numerical evidence from wall-bounded shear flows
has since supported these neutral-limit predictions (see, e. , Marusic & Monty 2019;
Baars & Marusic 2020; Yang et al. 05 is applied across the full vertical domain. This fixed rotation
provides a consistent streamwise–spanwise (−) coordinate system that preserves the
geometric orientation of boundary-layer-spanning structures across height while providing
a physically meaningful decomposition of the turbulent fluctuations aligned with the nearsurface mean flow and shear (Wilczak et al. However, these
frameworks do not explicitly account for the logarithmic profile and presence of attached
eddies in the neutral limit. Banerjee et al. (2014);
Banerjee et al. (2015);
Baars & Marusic (2020);
Huang & Katul (2022)
Convective
surface layer
h
′2
i/
2
∗ = [12 + 0. Introduction
Sheared convective boundary layers represent a fundamental class of fluid flows with
widespread relevance across engineering and the natural sciences. These environments are
characterised by the complex interaction between wall-bounded shear turbulence and positive surface buoyancy (Moeng & Sullivan 1994; Khanna & Brasseur 1998; Salesky et al. Introduction
Sheared convective boundary layers represent a fundamental class of fluid flows with
widespread relevance across engineering and the natural sciences. These environments are
characterised by the complex interaction between wall-bounded shear turbulence and positive surface buoyancy (Moeng & Sullivan 1994; Khanna & Brasseur 1998; Salesky et al. Chaudhary, M. Chamecki and M. au
(Received xx; revised xx; accepted xx)
Large-eddy simulations (LES) of the convective atmospheric boundary layer (CBL) are
used to investigate velocity variance statistics in turbulent sheared convection. The thirteen
simulations span conditions from weak convection with longitudinal rollsto free penetrative
convection with no mean wind. Chamecki and M. Heisel
2017; Bou-Zeid et al. 2020;
Wang et al. 2021) to understanding land-atmosphere interactions (Albertson & Parlange
1999; Stoll et al. The estimation of subgrid-scale (SGS) stresses uses a Lagrangian averaged scaledependent (LASD) dynamic model to define the SGS eddy viscosity (Bou-Zeid et al. The SGS heat flux is closed using the same dynamic formulation alongside a constant
subgrid turbulent Prandtl number, Prsgs = 0. Similar to the surface layer, measurements and simulations have
been shown to fit this functional form with some variability in the coefficients and exponents
(e. , Caughey & Palmer 1979; Sorbjan 1988; Lenschow et al. Similar to the surface layer, measurements and simulations have
been shown to fit this functional form with some variability in the coefficients and exponents
(e. , Caughey & Palmer 1979; Sorbjan 1988; Lenschow et al. The instantaneous horizontal cross-sections at = 0. 1
illustrate the
change in coherent turbulence structure with increasing instability: the weakly convective
near-surface flow is populated by longitudinal convective rolls that organise the flow into
stable, counter-rotating circulations (LeMone 1976). Heisel
2017; Bou-Zeid et al. 2018; Chavez-Medina ´ et al. (2023)
Table 1. Common formulations for predicting the vertical velocity variance h
′2
i across different conditions
within convective boundary layers (CBLs), noting some formulas are derived from definitions for the standard
deviation. Journal of Fluid Mechanics
Deardorff (1970) used dimensional analysis to predict the scaling of turbulence in
buoyancy-dominated conditions. The scales ∗ and associated with wall-bounded shear
become irrelevant both in the global limit of free convection and far from the surface in the
convective mixed layer. The scales ∗ and associated with wall-bounded shear
become irrelevant both in the global limit of free convection and far from the surface in the
convective mixed layer. Instead, large-scale turbulent behaviour is controlled by the surface
kinematic heat flux and the CBL depth, which combine to form the convective velocity
scale ★ = (/0)
1/3
(Deardorff 1970). 1977; Khanna & Brasseur 1997; Wilson 2008; Maronga & Reuder 2017). For the bulk of the CBL above the surface layer, universal functions for h
′2
i have
been proposed using the global convective velocity ★ and the relative height /
(Lenschow et al. 2021) to understanding land-atmosphere interactions (Albertson & Parlange
1999; Stoll et al. The convective atmospheric boundary layer (CBL) serves as a
prominent and widely studied example of this physical system within the atmospheric
sciences, controlling the vertical transport of momentum, energy, moisture, and trace
chemicals between the Earth’s surface and the free troposphere (Brutsaert 1982; Stull
1988; Garratt 1992; Wyngaard 2010; Dewani et al. As seen in table 1, the constant value for the
vertical variance is in the range ≈ 1. 9 (Panofsky & Dutton 1984; Perry & Li
1990; Heisel et al. Above this,
there is an entrainment layer between the CBL and the capping inversion where the wind
magnitude reaches . In a rotating atmosphere governed by Coriolis forces, the mean wind vector typically
changes direction with height through the planetary boundary layer (Tennekes & Lumley
1972; Grossman 1982). 1977; Khanna & Brasseur 1997; Wilson 2008; Maronga & Reuder 2017). For the bulk of the CBL above the surface layer, universal functions for h
′2
i have
been proposed using the global convective velocity ★ and the relative height /
(Lenschow et al. 2021) to understanding land-atmosphere interactions (Albertson & Parlange
1999; Stoll et al. The convective atmospheric boundary layer (CBL) serves as a
prominent and widely studied example of this physical system within the atmospheric
sciences, controlling the vertical transport of momentum, energy, moisture, and trace
chemicals between the Earth’s surface and the free troposphere (Brutsaert 1982; Stull
1988; Garratt 1992; Wyngaard 2010; Dewani et al. 1977; Khanna & Brasseur 1997; Wilson 2008; Maronga & Reuder 2017). For the bulk of the CBL above the surface layer, universal functions for h
′2
i have
been proposed using the global convective velocity ★ and the relative height /
(Lenschow et al. Chaudhary, M. Chamecki and M. Chamecki and M. Heisel
2017; Bou-Zeid et al. Chamecki and M. Heisel
2017; Bou-Zeid et al. 1
illustrate the
change in coherent turbulence structure with increasing instability: the weakly convective
near-surface flow is populated by longitudinal convective rolls that organise the flow into
stable, counter-rotating circulations (LeMone 1976). As instability increases, these largescale structures gradually break down into a mixed roll–-cellular organisation comprising
predominantly buoyancy-driven cellular plume structures. 2019;
Dewani et al. Other formulations and conditions for h
′2
i have been proposed in
the literature – such as those incorporating shear-buoyancy superposition (Zilitinkevich
1994; Zilitinkevich et al. 2019;
Dewani et al. Other formulations and conditions for h
′2
i have been proposed in
the literature – such as those incorporating shear-buoyancy superposition (Zilitinkevich
1994; Zilitinkevich et al. Introduction
Sheared convective boundary layers represent a fundamental class of fluid flows with
widespread relevance across engineering and the natural sciences. These environments are
characterised by the complex interaction between wall-bounded shear turbulence and positive surface buoyancy (Moeng & Sullivan 1994; Khanna & Brasseur 1998; Salesky et al. Introduction
Sheared convective boundary layers represent a fundamental class of fluid flows with
widespread relevance across engineering and the natural sciences. These environments are
characterised by the complex interaction between wall-bounded shear turbulence and positive surface buoyancy (Moeng & Sullivan 1994; Khanna & Brasseur 1998; Salesky et al. These environments are
characterised by the complex interaction between wall-bounded shear turbulence and positive surface buoyancy (Moeng & Sullivan 1994; Khanna & Brasseur 1998; Salesky et al. arXiv:2611. (2023)
Table 1. Common formulations for predicting the vertical velocity variance h
′2
i across different conditions
within convective boundary layers (CBLs), noting some formulas are derived from definitions for the standard
deviation. For the spanwise (cross-wind) variance, h
′2
i, the logarithmic spatial decay evaluated in
(1. 2) is consistent with predictions and observations under neutral conditions (Townsend
1976; Lee & Moser 2015; Zimmerman et al. Extensive experimental and numerical evidence from wall-bounded shear flows
has since supported these neutral-limit predictions (see, e. , Marusic & Monty 2019;
Baars & Marusic 2020; Yang et al. Extensive experimental and numerical evidence from wall-bounded shear flows
has since supported these neutral-limit predictions (see, e. , Marusic & Monty 2019;
Baars & Marusic 2020; Yang et al. 2) is consistent with predictions and observations under neutral conditions (Townsend
1976; Lee & Moser 2015; Zimmerman et al. 2019; Baidya et al.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Appendix B Details
The SGS variance estimation relies on the grid resolution being within the inertial subrange when the SGS variance is estimated, so that the unresolved energy can be extrapolated from the resolved scales using a −5/3 spectral slope <ref:2611.14805#pg5>. The cutoff height is therefore defined as the lowest height at which the total variances obtained with Δ and 1.5Δ differ by less than 1% <ref:2611.14805#pg5>. The SGS estimate is considered reliable where the resulting total variance is insensitive to the choice of grid filter <ref:2611.14805#pg5>. The results in figure 6 therefore show that MOST captures the qualitative scaling trends across varying / for all three velocity variance components, but complete similarity is precluded by underlying height dependencies <ref:2611.14805#pg4>.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI can perform accurate prediction of turbulent velocity variance profiles across a wide range of convective boundary layer conditions by utilizing large-eddy simulations (LES) and comparing results against established empirical scaling laws like Monin-Obukhov similarity theory (MOST).
-
Improved AI can quantitatively assess the structural transition between thermal rolls and polygonal cells by analyzing scale-wise spectral budgets, specifically identifying how pressure redistribution R changes across these regimes.
-
Improved AI can accurately determine the dominant turbulent energy pathway for different convection states by comparing depth-integrated statistics, such as Figure 10(c), to return-to-isotropy predictions.
-
Improved AI can distinguish between shear-generated and buoyancy-generated turbulence contributions by analyzing spectral variance budgets in the wavenumber domain, identifying specific scales where each source dominates.
-
Improved AI can predict the height dependence of streamwise velocity variance accurately by applying empirical formulations like those in Figure 8, which incorporate dependencies on both global instability and flow structure (rolls or cells).
Abstract
Large-eddy simulations (LES) of the convective atmospheric boundary layer (CBL) are used to investigate velocity variance statistics in turbulent sheared convection. The thirteen simulations span conditions from weak convection with longitudinal rolls to free penetrative convection with no mean wind. In the presence of thermal rolls, the near-surface streamwise variance profile exhibits an approximately logarithmic decay with a slope proportional to the friction velocity, u*, and an added constant proportional to the convective velocity, w. After the structural transition to convective cells, both the streamwise and spanwise variances follow the empirical stability and height dependencies of Wilson (Boundary-Layer Meteorol., 2008, vol. 129, pp. 353--369). The near-surface vertical (wall-normal) velocity variance is well described by Monin--Obukhov similarity with improved agreement using local-in-height scaling. Within the mixed layer, the peak vertical variance initially decreases relative to w as shear diminishes, before increasing and shifting downward as the flow approaches free convection. In contrast, the total turbulent energy decreases relative to w across the parameter space. The spanwise velocity variance represents the dominant turbulent component under weak convection and exceeds the streamwise variance throughout most of the convective regime. These statistical trends are attributed to the role of pressure, evaluated through variance budget contributions. Large-scale buoyancy production in the mixed layer is transported downward by pressure and redistributed preferentially to the spanwise component, coinciding with the presence of longitudinal roll motions. The weakening of this pressure-transport pathway for convective cells coincides with greater retention of vertical variance within the mixed layer.
Related papers
- Data-driven impeller model for efficient large eddy simulations of metastable von K'arm'an flows
- Numerical study of nitrogen oxides chemistry during plasma assisted combustion in a sequential combustor
- Emergent Transfer of a Physics Foundation Model from Simulation to Laboratory Turbulence
- Early onset of secondary shear instability in Kelvin-Helmholtz braids at high Reynolds number
- Rotational covariance, continuous spectrum and non-modal growth of three-dimensional planar weak viscous shock layers
- Deep Learning-based Algebraic Reynolds Stress Closures for RANS Simulations of Turbulent Flows