Numerical study of nitrogen oxides chemistry during plasma assisted combustion in a sequential combustor
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Numerical study of nitrogen oxides chemistry during plasma assisted combustion in a sequential combustor".
Paper summary: Kai: So, wrapping up the "Numerical study of nitrogen oxides chemistry during plasma assisted combustion in a sequential combustor," what we’re seeing here is that this work first identifies the specific NO formation pathways when you introduce Nanosecond Repetitively Pulsed Discharges into a turbulent flow combustor.
Mira: They proved that their high-fidelity Large Eddy Simulation setup can successfully retrieve the effects of those NRPDs on both the flame turbulence and the resulting nitrogen oxide production when compared to actual experiments.
Lev: The implication is that for anyone designing these systems, understanding those specific reactions causing nitrogen two dissociation is really important because that’s where most of the NO comes from.
Kai: They are now focused on finding those key NRPD parameters that trigger the dissociation of nitrogen molecules so they can give practical design guidance for real applications.
Mira: It confirms that modeling the plasma impact using chemical effects, fast gas heating, and vibrational excitation is a necessary step if you want an accurate picture of the NOx emissions in these plasma assisted systems.
Lev: What this means for us on the hardware side is that when we look at scaling this up to real hardware, we need to make sure our error-correction models account for how those chemical pathways change as the operating pressure or equivalence ratio shifts.
Kai: It gives us a clearer picture of the physical drivers behind some of those emissions they see in previous literature, even though this study is limited by focusing on specific operating points in their lab burner.
Conclusion: Kai: So, this paper is about studying how nitrogen oxides form when you use plasma to help burn fuel in a specific type of burner setup called a sequential combustor.
Mira: Yeah, the authors are looking at these kinetic pathways for NOx formation in that second stage where they apply the nanosecond pulsed discharges.
Lev: From an error correction standpoint, they're using this lab-scale experimental setup to understand what’s happening chemically before you try to build something real.
Kai: The main point seems to be that they're testing their high-fidelity large eddy simulation for the first time to see how the nanosecond pulsed discharges affect NOx formation in a real burner.
Mira: They found that the NO formation is mainly due to nitrogen two dissociation caused by direct electron impact, which creates nitrogen atoms that then react with oxygen and hydroxyl radicals in the sequential burner.
Lev: So, it seems like those specific plasma effects are what drive most of the NO creation when you look at their operating points.
Kai: They also found that if you remove the modeling of how the nitrogen plasma chemistry works, your prediction for NO formation drops really low, which shows how important that detail is.
Mira: It really highlights that understanding those specific chemical reactions driving N two dissociation is the key if you want to optimize these systems for lower NOx emissions.
Lev: That leads directly into what they are trying to figure out next—identifying the exact parameters of the nanosecond pulses that trigger this nitrogen molecule dissociation.
Kai: That’s where we go from just observing chemistry to actually designing hardware that controls it.
Quentin Maléa, Nicolas Barlພonb, Sergey Shcherbaneva, Bayu Dharmaputraa, Nicolas Noiraya
CAPS Laboratory, Department of Mechanical and Process Engineering, ETH Zurich · Cerfacs
physics.flu-dyn, physics.plasm-ph
Submitted: 2023-06-27
Updated: 2026-11-18
Comments: 38 pages, 19 figures. The journal version is available online at: https://doi.org/10.1016/j.combustflame.2023.113206
Journal ref: Numerical study of nitrogen oxides chemistry during plasma assisted combustion in a sequential combustor, Combustion and Flame Volume 260, February 2024, 113206
DOI: 10.1016/j.combustflame.2023.113206
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
The gist: Plasma Assisted Combustion (PAC) is a promising technology to enhance the combustion of lean mixtures prone to instabilities and flame blow-off The aim of this study is to determine the kinetic…
Key concepts
- Plasma Assisted Combustion (PAC)
- PAC is a technique used to improve the burning of fuel mixtures that are naturally unstable or prone to flame blow-off. It involves using plasma discharges, like NRPDs, to enhance the combustion process by providing energy and altering chemical reactions in lean mixtures.
- Large Eddy Simulation (LES)
- LES is a high-fidelity numerical method used to model turbulent flows and combustion. This study used it for the first time to accurately simulate how the turbulent mixing and plasma discharges interact with each other, which is essential for understanding real-world combustion phenomena.
- Nitrogen Oxide (NO) Formation Pathway
- The paper discovered that in this specific setup, NO is mainly created when nitrogen molecules (N2) are broken apart by direct impacts from electrons in the plasma. These resulting nitrogen atoms then react with other species to form NO gas, which is a key mechanism to control emissions.
Terminology
Summary
Plasma Assisted Combustion (PAC) is a promising technology to enhance the combustion of lean mixtures prone to instabilities and flame blow-off The aim of this study is to determine the kinetic pathways leading to NOx formation in the second stage of a sequential combustor assisted by Nanosecond Repetitively Pulsed Discharges (NRPDs). p. 0
Novelty and Significance
In this work, a novel high-fidelity Large Eddy Simulation (LES) setup is used for the first time to study the effects of Nanosecond Repetitively Pulsed Discharges (NRPDs) on the formation of NOx. The LES setup includes an accurate description of the combustion and NOx chemistry with an innovative sophisticated modeling of the plasma discharges to account for the impact on the NOx formation. p. 1 Chemical pathways for the formation of NOx due to NRPDs are studied for the first time in a real burner. p. 1 This is of major importance to limit the NOx emissions that can occur under certain conditions during plasma assisted combustion. p. 1 The excellent agreement with the experimental data demonstrates the capability of the original LES setup to retrieve the NRPD effects on the turbulent flame and on the formation of NO. p. 1
Sequential Combustor Setup
The numerical study is based on experimental tests performed with a laboratory scale sequential combustor operated at atmospheric pressure. The first stage consists of an array of 4×4 technically premixed jet flames, which generate hot combustion products. p. 4 The focus of this work is on the sequential stage where NRPDs are applied. p. 4 The inlet composition and temperature are defined by the combustion products of the first stage flame. p. 4 A 1-Dimensional (1D) laminar flame is used to estimate the combustion products of the first stage flame, then, the mixture evolves in a 0-Dimensional (0D) reactor for a time equal to the residence time until the inlet of the sequential stage dilution air mixer. p. 4
Numerical Modeling and Chemistry
The study employs a sophisticated multi-physics computation code to address multiple numerical challenges. This involves modeling turbulent mixing, turbulent combustion, NOx chemistry, plasma chemistry, and combustion chemistry. p. 3 The plasma modeling incorporates phenomenological approaches that account for the impact on NOx formation by dividing the discharge power into chemical effects, fast gas heating, and vibrational excitation. p. 7 Analytically Reduced Chemistry (ARC) mechanisms are used to accurately describe phenomena like NRPDs, auto-ignition, flame consumption rate, and stretch response. p. 9
Results of NO Formation Mechanisms
The formation of NO during plasma assisted combustion in a lab-scale sequential combustor was investigated using numerical simulation tools. For the operating points studied, the NO formation is mainly due to the dissociation of N2 by direct electron impact. p. 0 This generates nitrogen atoms that react with OH and O2 to form NO in the sequential burner. p. 2 Within the flame brush, the prompt mechanism slightly participates to the NO formation, without drastically changing the concentration. p. 4 Removing the modeling of the nitrogen plasma chemistry from the description of the plasma effects leads to a strong underestimation of the NO formation. p. 1
Conclusion and Future Work
More generally, this study is the first to identify the NO formation pathways when NRPDs are applied in a turbulent-flow combustor. The excellent agreement with experiments demonstrates the capability of the LES setup to retrieve NRPD effects on combustion and NO formation. p. 1 To optimize the application of NRPDs to combustion systems, particular attention needs to be paid to the reactions causing N2 dissociation, found to be mainly responsible for the formation of NO. p. 1 Work is underway to identify the NRPD key parameters that trigger the dissociation of nitrogen molecules, in order to give design indications for practical applications. p. 0 The contribution of kinetic pathways to NOx formation will change for other OPs, especially at higher equivalence ratio or operating pressure. p. 0
Acknowledgement
This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No [820091]). This work was supported by a grant from the Swiss National Supercomputing Centre (CSCS) under project ID s1220. p. 2 The authors gratefully acknowledge CERFACS for providing the LES solver AVBP and the ARCANE library. p. 9 They especially thank Q. Cazeres and J. Wirtz for their help in using ARCANE. p. 9
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved system can accurately predict NO formation pathways in turbulent flows by coupling Large Eddy Simulation (LES) with detailed 0D plasma computations, allowing for a comprehensive study of kinetic pathways leading to NO production and destruction zones.
-
Improved system can differentiate between different nitrogen plasma chemistries by incorporating the coefficients alpha2 and alpha3, enabling the prediction of how removing nitrogen plasma chemistry affects NO emissions in sequential combustors.
-
Improved system can quantify the influence of plasma on flame position by calculating ZCOG using Line-of-Sight integration of HRR and OH chemiluminescence, allowing for a precise assessment of how NRPDs extend lean blow-off limits.
-
Improved system can model the temporal evolution of NO in the discharge zone by analyzing four distinct phases:
High NO production due to the plasma discharge,
Post-discharge NO destruction,
andPost-discharge NO production.
-
Improved system can identify the specific chemical reactions responsible for key processes, such as atomic nitrogen production via direct electron impact on nitrogen molecules, which increases the formation of NO.
Related papers
- Emergent Transfer of a Physics Foundation Model from Simulation to Laboratory Turbulence
- Early onset of secondary shear instability in Kelvin-Helmholtz braids at high Reynolds number
- Rotational covariance, continuous spectrum and non-modal growth of three-dimensional planar weak viscous shock layers
- Deep Learning-based Algebraic Reynolds Stress Closures for RANS Simulations of Turbulent Flows
- Neptuna: A Comprehensive Machine Learning Framework for Benchmarking Complex Multiphase Flows
- Size and shape of condensing steam jets and plumes