Numerical study of nitrogen oxides chemistry during plasma assisted combustion in a sequential combustor

summary

The gist

Plasma Assisted Combustion (PAC) is a promising technology to enhance the combustion of lean mixtures prone to instabilities and flame blow-off The aim of this study is to determine the kinetic…

In short

This study used a novel Large Eddy Simulation (LES) to investigate how Nanosecond Repetitively Pulsed Discharges (NRPDs) affect nitrogen oxide (NOx) formation in a sequential combustor. The research identified that NO formation is primarily due to the dissociation of N2 by direct electron impact, providing crucial kinetic pathways for limiting emissions.

Key concepts

Plasma Assisted Combustion (PAC)
PAC is a technique used to improve the burning of fuel mixtures that are naturally unstable or prone to flame blow-off. It involves using plasma discharges, like NRPDs, to enhance the combustion process by providing energy and altering chemical reactions in lean mixtures.
Large Eddy Simulation (LES)
LES is a high-fidelity numerical method used to model turbulent flows and combustion. This study used it for the first time to accurately simulate how the turbulent mixing and plasma discharges interact with each other, which is essential for understanding real-world combustion phenomena.
Nitrogen Oxide (NO) Formation Pathway
The paper discovered that in this specific setup, NO is mainly created when nitrogen molecules (N2) are broken apart by direct impacts from electrons in the plasma. These resulting nitrogen atoms then react with other species to form NO gas, which is a key mechanism to control emissions.

Terminology used across episodes

This episode discusses

The paper

Numerical study of nitrogen oxides chemistry during plasma assisted combustion in a sequential combustor · Read on arXiv

Quentin Maléa, Nicolas Barlພonb, Sergey Shcherbaneva, Bayu Dharmaputraa, Nicolas Noiraya

CAPS Laboratory, Department of Mechanical and Process Engineering, ETH Zurich · Cerfacs

DOI: 10.1016/j.combustflame.2023.113206

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Numerical study of nitrogen oxides chemistry during plasma assisted combustion in a sequential combustor".

Paper summary: Kai: So, wrapping up the "Numerical study of nitrogen oxides chemistry during plasma assisted combustion in a sequential combustor," what we’re seeing here is that this work first identifies the specific NO formation pathways when you introduce Nanosecond Repetitively Pulsed Discharges into a turbulent flow combustor.

Mira: They proved that their high-fidelity Large Eddy Simulation setup can successfully retrieve the effects of those NRPDs on both the flame turbulence and the resulting nitrogen oxide production when compared to actual experiments.

Lev: The implication is that for anyone designing these systems, understanding those specific reactions causing nitrogen two dissociation is really important because that’s where most of the NO comes from.

Kai: They are now focused on finding those key NRPD parameters that trigger the dissociation of nitrogen molecules so they can give practical design guidance for real applications.

Mira: It confirms that modeling the plasma impact using chemical effects, fast gas heating, and vibrational excitation is a necessary step if you want an accurate picture of the NOx emissions in these plasma assisted systems.

Lev: What this means for us on the hardware side is that when we look at scaling this up to real hardware, we need to make sure our error-correction models account for how those chemical pathways change as the operating pressure or equivalence ratio shifts.

Kai: It gives us a clearer picture of the physical drivers behind some of those emissions they see in previous literature, even though this study is limited by focusing on specific operating points in their lab burner.

Conclusion: Kai: So, this paper is about studying how nitrogen oxides form when you use plasma to help burn fuel in a specific type of burner setup called a sequential combustor.

Mira: Yeah, the authors are looking at these kinetic pathways for NOx formation in that second stage where they apply the nanosecond pulsed discharges.

Lev: From an error correction standpoint, they're using this lab-scale experimental setup to understand what’s happening chemically before you try to build something real.

Kai: The main point seems to be that they're testing their high-fidelity large eddy simulation for the first time to see how the nanosecond pulsed discharges affect NOx formation in a real burner.

Mira: They found that the NO formation is mainly due to nitrogen two dissociation caused by direct electron impact, which creates nitrogen atoms that then react with oxygen and hydroxyl radicals in the sequential burner.

Lev: So, it seems like those specific plasma effects are what drive most of the NO creation when you look at their operating points.

Kai: They also found that if you remove the modeling of how the nitrogen plasma chemistry works, your prediction for NO formation drops really low, which shows how important that detail is.

Mira: It really highlights that understanding those specific chemical reactions driving N two dissociation is the key if you want to optimize these systems for lower NOx emissions.

Lev: That leads directly into what they are trying to figure out next—identifying the exact parameters of the nanosecond pulses that trigger this nitrogen molecule dissociation.

Kai: That’s where we go from just observing chemistry to actually designing hardware that controls it.

More episodes

← Home