Turbulent velocity statistics in convective boundary layers

summary

The gist

Large-eddy simulations (LES) of the convective atmospheric boundary layer (CBL) are used to investigate velocity variance statistics in turbulent sheared convection.

In short

Large-eddy simulations of convective boundary layers investigated velocity variance statistics across different convection regimes, from weak rolls to free penetrative convection. Findings show that horizontal variances decrease relative to shear, while vertical variance follows Monin–Obukhov similarity. The structural transition from rolls to cells is linked to changes in pressure redistribution and energy pathways.

Key concepts

Streamwise Variance Profile
This describes how the variance of the velocity component parallel to the mean wind changes with height in the boundary layer. It shows a logarithmic decay near the surface, influenced by both friction velocity (shear) and convective velocity, reflecting how turbulence scales with proximity to the ground.
Structural Transition (Rolls to Cells)
The flow changes its organization from organized longitudinal rolls aligned with the mean wind to more disorganized polygonal cells driven by buoyancy. This shift is a key feature in sheared convection and is associated with systematic changes in velocity statistics, indicating a reorganization of the turbulent structures.
Variance Budget Analysis
This technique tracks how turbulent kinetic energy is produced (by shear or buoyancy), transported vertically, redistributed by pressure, and dissipated. Analyzing these contributions helps identify the dominant physical processes driving turbulence at different flow conditions.
Monin–Obukhov Similarity Theory (MOST)
MOST is an empirical scaling law used to describe the vertical velocity variance near the surface. The simulations tested MOST to see if it captures the transition between shear-dominated and buoyancy-dominated scaling in neutral surface layers.

Terminology used across episodes

This episode discusses

The paper

Turbulent velocity statistics in convective boundary layers · Read on arXiv

School of Civil Engineering, The University of Sydney · Department of Atmospheric and Oceanic Sciences, University of California, Los Angeles

Large-eddy simulations (LES) of the convective atmospheric boundary layer (CBL) are used to investigate velocity variance statistics in turbulent sheared convection. The thirteen simulations span conditions from weak convection with longitudinal rolls to free penetrative convection with no mean wind. In the presence of thermal rolls, the near-surface streamwise variance profile exhibits an approximately logarithmic decay with a slope proportional to the friction velocity, u*, and an added constant proportional to the convective velocity, w. After the structural transition to convective cells, both the streamwise and spanwise variances follow the empirical stability and height dependencies of Wilson (Boundary-Layer Meteorol., 2008, vol. 129, pp. 353--369). The near-surface vertical (wall-normal) velocity variance is well described by Monin--Obukhov similarity with improved agreement using local-in-height scaling. Within the mixed layer, the peak vertical variance initially decreases relative to w as shear diminishes, before increasing and shifting downward as the flow approaches free convection. In contrast, the total turbulent energy decreases relative to w across the parameter space. The spanwise velocity variance represents the dominant turbulent component under weak convection and exceeds the streamwise variance throughout most of the convective regime. These statistical trends are attributed to the role of pressure, evaluated through variance budget contributions. Large-scale buoyancy production in the mixed layer is transported downward by pressure and redistributed preferentially to the spanwise component, coinciding with the presence of longitudinal roll motions. The weakening of this pressure-transport pathway for convective cells coincides with greater retention of vertical variance within the mixed layer.

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "Turbulent velocity statistics in convective boundary layers".

Mira: Here's the gist of the paper. Large-eddy simulations (LES) of the convective atmospheric boundary layer (CBL) are used to investigate velocity variance statistics in turbulent sheared convection.

Kai: These simulations span conditions from weak convection with longitudinal rolls to free penetrative convection with no mean wind.

Mira: The near-surface streamwise variance profile exhibits an approximately logarithmic decay with a slope proportional to the friction velocity, ∗, and an added constant proportional to the convective velocity, ★.

Kai: After the structural transition to convective cells, both the streamwise and spanwise variances follow the empirical stability and height dependencies of Wilson (BoundaryLayer Meteorol., 2008) <ref:2611.14805#pg3>.

Title and authors: Mira: This paper, "Turbulent velocity statistics in convective boundary layers," really dives into those statistical signatures of turbulence in the atmospheric boundary layer. It sets up a framework to track how things change when you move from one type of organization of turbulent flow to another.

Kai: I mean, they use these simulations to show that the streamwise and spanwise variances follow specific empirical rules after that structural transition happens, which is pretty neat because it links the structure back to established scaling laws like those from Wilson and Boundary Layer Meteorology.

Lev: It's interesting because for us building error correction systems, knowing how these variances scale with height—like that logarithmic decay they mention—tells us about the energy spectrum we need to handle on our real processors.

Kai: Right. They find that the near-surface streamwise variance profile drops off logarithmically, and this drop is controlled by two main things: the friction velocity, which is related to how much friction there is near the ground, and a constant term tied to the convective velocity.

Mira: And then after that structural change, both the streamwise and spanwise variances follow some specific stability dependencies based on height. It’s like they’re saying that once you get into a cell structure, the rules for how energy spreads become very predictable based on where you are in the layer.

Lev: If we were trying to run this on a real system, we'd need to make sure our simulation resolves enough of those different scales so that we can actually see that transition from rolls to cells clearly.

Kai: True. It’s not just about seeing the pattern; it’s about quantifying *why* the pattern changes based on the input parameters.

The paper's summary: Kai: So, what they summarize is that they looked at everything from weak convection with longitudinal rolls up to free penetrative convection with no mean wind, and found a consistent way to describe the velocity variance statistics across all these different regimes.

Mira: They established that the near-surface vertical velocity variance is well described by Monin–Obukhov similarity, but they also used a local-in-height scaling to get better agreement when looking at it closer to the surface.

Lev: That’s helpful because it means we don't have to guess how much buoyancy matters right at the very bottom; we can use that local scaling relationship.

Kai: And in terms of the mixed layer, they noticed a specific pattern: the peak vertical variance first drops when shear gets weaker, but then it starts increasing and shifting down as the flow moves toward that free convection state.

Mira: That shift happens because of how pressure and buoyancy interact; they attribute these statistical trends directly to how pressure contributes to the energy budget, which is a key concept for us when we look at turbulence in general.

Lev: When I look at our error correction overhead, those pressure and buoyancy terms are exactly what complicate the modeling because they introduce non-linear dependencies that might not be captured by simpler models.

Kai: So, in short, they show a consistent way to describe both the near-surface behavior and the mixed layer dynamics across different convective strengths by connecting it to these fundamental physical scales.

The paper's improvements: Mira: They suggest that using methods like Most—Monin–Obukhov similarity theory—can capture the transition in how vertical velocity variance changes from being dominated by shear to being dominated by buoyancy effects, which is a big improvement over just using one fixed scaling.

Kai: I agree. And they show that for the surface layer, while Most gives a decent qualitative picture across different stability parameters, it doesn't capture the full height dependence because there’s an extra layer of physics at play that’s separate from just the local buoyancy term.

Lev: That missing piece is what we worry about when we try to map these statistical results onto hardware; if a model misses a key height dependency, our predictions will be off by a lot at the edges of the domain.

Kai: And they also use variance budget equations to check energy pathways, and they found that the pressure-strain redistribution is what helps bring things back toward being isotropic dissipation, which is important for getting the energy balance right.

Mira: So, the paper points toward needing a more complex framework than just a simple similarity theory to get a full picture of how these statistical properties evolve as you move through different convective states.

Conclusion: Kai: Wrapping up the "Turbulent velocity statistics in convective boundary layers" paper, we see that horizontal and turbulent kinetic energy decrease relative to the scaling parameter star across all convection regimes.

Mira: The main implication is that understanding the structural shift from rolls to cells requires a model that accounts for how pressure redistributes energy to maintain some form of isotropy in dissipation.

Lev: For my work, it means when we look at predicting error growth, we need to make sure our framework handles the transition between these two organizational states correctly because that transition dictates the energy pathways.

Kai: So, even though they show a consistent way to describe these variances using those empirical stability dependencies, the paper points out that complete similarity is still limited by those underlying height dependencies.

Mira: Exactly. It's not just about finding a good scaling law; it’s about understanding the physical mechanism—the pressure redistribution—that drives the flow toward a more even distribution of energy across scales.

Lev: I think that means for future simulations, we should focus on modeling that pressure-strain correlation more accurately, because that’s where the real physics of how energy gets dissipated is happening.

Kai: So, to sum up this work on "Turbulent velocity statistics in convective boundary layers," they give us a detailed statistical map of how turbulence organizes itself in these flows and point toward the need for models that capture those fine-scale pressure effects to get a complete picture.

More episodes

← Home