Quasi-DNS with chemical kinetics for a single multiple-injection burner element under stable lean conditions for future gas turbine applications
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Quasi-DNS with chemical kinetics for a single multiple-injection burner element under stable lean conditions for future gas turbine applications".
Mira: Here's the gist of the paper. Gas turbine combustors for power generation increasingly operate close to lean blow-out (LBO) limits, where small changes in fuel–air mixing or flow structure can destabilize the flame and modify near blow-out dynamics.
Kai: The method develops a Quasi-DNS workflow with detailed methane–air chemistry for a single element of a multiple-injection burner, modeled as a coaxial burner with a mixing tube and downstream combustion chamber, as a methodological basis for near blow-out analysis in future gas turbine applications.
Mira: The workflow consists of five key steps for the Quasi-DNS approach.
Kai: These steps include defining the single-element geometry and operating conditions, prescribing inlet and outlet boundary conditions and inlet velocity profiles, selecting and validating an efficient methane–air reaction mechanism, constructing RANS and Quasi-DNS grids with verified convergence, and computing diagnostics such as scalar dissipation rate and flame indices.
Paper summary: Kai: So to recap this paper, "Quasi-DNS with chemical kinetics for a single multiple-injection burner element under stable lean conditions for future gas turbine applications," the main thesis is that as gas turbine combustors operate closer to the lean blow-out limit, small changes in fuel air mixing or flow structure can seriously destabilize the flame and modify its behavior.
Mira: It claims that conventional RANS simulations fail to capture this because they overpredict turbulent mixing and miss unsteady flame anchoring and local extinction phenomena right near the physical hardware.
Lev: The paper presents a Quasi-DNS workflow with detailed methane air chemistry on a coaxial burner with a mixing tube, which is designed specifically to test the limitations of RANS-based design calculations in these lean blow-out relevant elements.
Kai: It matters because it provides a step by step workflow that can be directly adapted to other burner configurations that have mixing tubes in gas turbine combustors, which helps engineers understand where RANS might fall short.
Mira: The method combines validated reduced kinetics, grid converged three dimensional sector meshes, and uses scalar diagnostics like the scalar dissipation rate and flame index to characterize the combustion modes.
Lev: They are building this workflow for direct reuse in other studies involving mixing-tube burner elements, which suggests it's a practical tool for testing design assumptions.
Kai: The paper sets up a system that combines validated reduced kinetics with grid converged three dimensional sector meshes and uses scalar diagnostics such as the scalar dissipation rate and flame index to characterize the combustion modes.
Mira: They use the reactingFoam solver in OpenFOAM v1706 for this transient Quasi-DNS approach with detailed chemistry to analyze methane air combustion.
Lev: The entire step by step workflow, including grid construction, mechanism validation and post processing scripts, is designed for direct reuse in other burner configurations with mixing tubes in gas turbine combustors.
Kai: So the core idea is developing this specific setup that combines validated reduced kinetics with grid converged three dimensional sector meshes and uses scalar diagnostics such as the scalar dissipation rate and flame index to characterize the combustion modes.
Mira: This approach allows them to show how Quasi-DNS reveals mixing and flame anchoring at the mixing tube outlet that RANS does not capture for this specific burner element.
Lev: The paper shows they are using a reactingFoam solver in OpenFOAM v1706 for this transient Quasi-DNS approach with detailed chemistry to analyze methane air combustion.
Kai: This whole process is designed for direct reuse in other burner configurations with mixing tubes in gas turbine combustors.
Mira: The method combines validated reduced kinetics, grid converged three dimensional sector meshes, and uses scalar diagnostics such as the scalar dissipation rate and flame index to characterize the combustion modes.
Conclusion: Kai: Looking at the title, "Quasi-DNS with chemical kinetics for a single multiple-injection burner element under stable lean conditions for future gas turbine applications," it points directly at the focus: using high fidelity simulation to understand how these specific burner elements perform under lean conditions.
Mira: The authors are Kazuki Abe, Youhi Morii, and Kaoru Maruta, and their work is important because they address the pressure we have to achieve higher efficiency and lower emissions while keeping systems stable.
Lev: What this means in simple terms is that when we design these burners for future gas turbine applications, especially those using low carbon fuels like hydrogen, engineers need methods that go beyond standard RANS predictions.
Kai: They are advocating for a method where you can see the spatial variations in combustion mode near the mixing layer that are missed by RANS, which is crucial for understanding flame anchoring issues under lean conditions.
Mira: The implication is that if we want to design better low-NOx systems, we need to use tools like this Quasi-DNS approach to accurately predict how the flame will actually behave in those tricky near blow-out regions.
Lev: Essentially, it tells designers that for applications involving mixing tubes and lean operation, RANS gives a limited picture because you need a method that captures the unsteady physics happening at the boundary.
Kai: It pushes for using these high fidelity tools when analyzing burner elements to make sure we aren't designing systems that are unstable when they operate close to their operational limits.
Kazuki Abe, Youhi Morii, Kaoru Maruta
Institute of Fluid Science, Tohoku University
physics.flu-dyn
Submitted: 2026-05-22
Updated: 2026-11-08
Comments: 25 pages, 15 figures. Title changed; revised following peer review. Published in MethodsX
Journal ref: MethodsX 17 (2026) 104218
DOI: 10.1016/j.mex.2026.104218
License: http://creativecommons.org/licenses/by-nc-nd/4.0/
Importance score: 77/100
The gist: Gas turbine combustors for power generation increasingly operate close to lean blow-out (LBO) limits, where small changes in fuel–air mixing or flow structure can destabilize the flame and modify…
Key concepts
- Quasi-DNS workflow
- This is a computational method that combines the accuracy of Direct Numerical Simulation (DNS) with the computational feasibility of Reynolds-Averaged Navier-Stokes (RANS). It uses high grid resolution in critical areas to capture complex fluid motions and chemical reactions, allowing for detailed analysis of flame structure and mixing.
- Lean Blow-out (LBO)
- This refers to a combustion condition where the fuel-air mixture is very lean, meaning there is a large excess of air relative to the fuel. In these conditions, small disturbances in how the fuel and air mix can easily cause the flame to become unstable or blow out.
- Scalar Dissipation Rate (SDR)
- The SDR is a diagnostic tool used in simulations to measure how intensely fluid mixing occurs within a specific region. It acts as a metric for grid resolution, helping researchers determine if the simulation mesh is fine enough to accurately capture the turbulent mixing processes that influence flame stability.
Terminology
Summary
Gas turbine combustors for power generation increasingly operate close to lean blow-out (LBO) limits, where small changes in fuel–air mixing or flow structure can destabilize the flame and modify near blow-out dynamics. p. 0 , (2023), 224. Abstract
Gas turbine combustors for power generation increasingly operate close to lean blow‑out (LBO) limits, where small
changes in fuel–air mixing or flow structure can destabilize the flame and modify near blow‑out dynamics. To address this gap, we develop a
Quasi‑DNS workflow with detailed methane–air chemistry for a single element of a multiple‑injection burner, modeled
as a coaxial burner with a mixing tube and a downstream combustion chamber, as a methodological basis for near
blow‑out analysis in future gas turbine applications. The method is implemented in OpenFOAM and comprises five key components: (i) a simplified but representative
three‑dimensional sector geometry with a 30° domain to capture circumferential vortices at the mixing tube outlet,
(ii) boundary conditions and inlet velocity profiles that reproduce coaxial jet and preheated air conditions, (iii) a
reduced Yang–Pope reaction mechanism validated against GRI 3.Where the paper says it
Where the paper says it
Methodology Overview
The workflow consists of five key steps for the Quasi-DNS approach. These steps include defining the single-element geometry and operating conditions, prescribing inlet and outlet boundary conditions and inlet velocity profiles, selecting and validating an efficient methane–air reaction mechanism, constructing RANS and Quasi-DNS grids with verified convergence, and computing diagnostics such as scalar dissipation rate and flame indices. p. 3 The workflow consists of defining a representative
single-burner geometry and operating conditions, prescribing inlet and outlet boundary conditions, selecting and
validating an efficient methane–air reaction mechanism, constructing RANS and Quasi-DNS grids with verified
convergence, and applying scalar diagnostics such as scalar dissipation rate and flame index to characterize the flame
near the mixing tube outlet. Geometry and target conditions
The target configuration represents a single burner element of a multiple‑injection burner used in gas turbine
combustors, modeled here as a coaxial burner with a mixing tube and a downstream combustion chamber. This work employs a transient Quasi-DNS approach with detailed chemistry to analyze methane–air combustion in
a coaxial burner with a mixing tube and downstream combustion chamber. The simulations are performed using the
reactingFoam solver in OpenFOAM v1706, with the same physical and chemical models as in the authors’ previous
Quasi-DNS study of lean blow-out phenomena in this configuration.Where the paper says it
Where the paper says it
Geometry and Numerical Setup
The target configuration represents a single burner element of a multiple-injection burner modeled as a coaxial burner with a mixing tube and downstream combustion chamber. The geometry simplifies the fuel and air boundaries to baffle boundaries with zero thickness to focus on the shear mixing layer between the fuel and air streams. p. 3 In the present model, the fuel and air boundaries are therefore
represented as baffle boundaries with zero thickness. This simplification removes the small-scale recirculation behind
a thick lip and allows the analysis to focus on the shear mixing layer between the fuel and air streams, which is expected
to play a dominant role in the flame stabilization mechanism near the mixing tube outlet. The grid is refined in regions that are critical for mixing and flame stabilization. At the boundary between fuel and
air flows inside the mixing tube, the radial grid width is set to 0. Taken
together, these results support the conclusion that the 50 μm radial and 0. 25 mm axial grid spacing are adequate to
resolve to resolve the flame structure near the mixing tube outlet.Where the paper says it
Where the paper says it
Where the paper says it
Key Findings in Validation
The Quasi-DNS results reveal limited mixing inside the mixing tube and strong vortical mixing at the tube outlet, leading to extended and structured heat-release regions that differ markedly from the smoother, more compact flames predicted by RANS. The flame lift-off height HL is defined as the axial position where the OH mass fraction first exceeds 0. p. 7 time‑averaged Quasi‑DNS fields. In the present workflow, the flame lift‑off height HL is defined as the axial position
where the OH mass fraction first exceeds 0. The lift‑off position is indicated by a dotted line in the contour plots, and HL denotes this lift‑off height. Both approaches produce a flame stabilized near the mixing tube outlet, but the resolved structures differ markedly.Where the paper says it
Where the paper says it
Diagnostic Interpretation
Two scalar diagnostics are employed to characterize mixing and combustion modes near the mixing tube outlet:
-
Scalar dissipation rate (SDR): This quantifies the intensity of mixing in the shear layer and serves as a grid-resolution metric. p. 6
Where the paper says it
The scalar dissipation rate SDR, defined above, quantifies the intensity of mixing in the shear layer and is used to relate local mixing rates to flame stabilization and quenching tendencies. It also serves as a grid‑resolution metric in the Quasi-DNS setup.
-
Flame indices: The methane-based flame index is sensitive to reactant mixing, while the CO-based index aligns more closely with the main heat-release zone. p. 6
Where the paper says it
5 indicate diffusion‑dominated combustion. The methane‑based index is sensitive to the mixing of reactants, while the CO‑based index aligns more closely with the main heat‑release zone in methane flames.
Limitations and Scope
The workflow has limitations, including modeling simplified geometries without tube wall thickness or cooling holes, which restricts direct quantitative applicability to full combustor assemblies. Furthermore, the simulations are performed at atmospheric pressure with preheated air at 400 °C and methane as the only fuel, suggesting the results provide qualitative insight rather than quantitative predictions for high-pressure engines. p. 8 The present results are therefore best interpreted at the burner‑element scale and as qualitative guidance for scaling
trends in more complex hardware. Second, all simulations are performed at atmospheric pressure with preheated air at 400 °C and methane as the
only fuel. The three‑dimensional grids contain 747,740 cellsfor RANS and 2,585,352 cellsforQuasi‑DNS,
and time‑resolved runs must cover tens of milliseconds of physical time to obtain statistically meaningful averages. As
a result, the workflow is best suited for targeted analyses of flame structure and stabilization in coaxial burners with
mixing tubes and for assessing the limitations of RANS‑based design calculations.Where the paper says it
Where the paper says it
Conclusion on RANS Comparison
The Quasi-DNS workflow is capable of resolving mixing-controlled flame stabilization at the mixing-tube outlet, which is not captured by RANS, thereby validating the method for LBO-relevant flame anchoring analysis. The comparison shows that in the partially premixed case, Quasi-DNS reveals spatial variations in combustion mode near the mixing layer that are not resolved by RANS. p. 7 In the partially premixed case, however, Figure 11 shows that Quasi‑DNS predicts a downstream shift and
broadening of the heat‑release distribution compared with RANS, reflecting the limited mixing in the mixing tube and
the role of vortices at the outlet. The flame index plots in Figure 9 also support this interpretation: for the perfectly
premixed case, both methane‑ and CO‑based indices are close to unity in the main reaction zone for both RANS and
Quasi‑DNS, whereasfor the partially premixed case the Quasi‑DNS fieldsrevealspatial variationsin combustion mode,
including diffusion‑like regions near the mixing layer, that are not captured by RANS.Where the paper says it
Reference List
[1] CO2 emissions in 2023 – analysis. IEA; 2024.
[3] T. Lieuwen, V. p. 9 Hydrogen Energy 90 (2024) 575-587. Lieuwen, V. Lieuwen, V. Yang, Gas Turbine Emissions, Cambridge University Press, New York, 2013.Where the paper says it
Where the paper says it
[4] A. H. Lefebvre, D. p. 9 Yang, Gas Turbine Emissions, Cambridge University Press, New York, 2013. Lefebvre, D. Lefebvre, D. Ballal, Gas Turbine Combustion 3rd Edition, CRC Press, 2010.Where the paper says it
Where the paper says it
[5] A. C. Benim, K. J. Syed, Flashback Mechanisms in Lean Premixed Gas Turbine Combustion, Academic Press, 2015. p. 9 Ballal, Gas Turbine Combustion 3rd Edition, CRC Press, 2010. Syed, Flashback Mechanisms in Lean Premixed Gas Turbine Combustion, Academic Press, 2015.Where the paper says it
[6] W. D. York, W. S. Ziminsky, E. p. 9 Syed, Flashback Mechanisms in Lean Premixed Gas Turbine Combustion, Academic Press, 2015. Ziminsky, E. Ziminsky, E. Gas Turbines Power, 135, (2013), 022001.Where the paper says it
Where the paper says it
[7] H. Funke, N. Beckmann, J. p. 9 Gas Turbines Power, 135, (2013), 022001. Beckmann, J. Beckmann, J. Horikawa, ASME J. Horikawa, ASME J. Gas Turbines Power, 143, (2021), 071002.Where the paper says it
Where the paper says it
Where the paper says it
[8] K. Abe, T. Koganezawa, Proceedings of the International Conference on Power Engineering-13 (ICOPE-13), (2013), 496-501. p. 9 Gas Turbines Power, 143, (2021), 071002. Koganezawa, Proceedings of the International Conference on Power Engineering-13 (ICOPE-13), (2013),
496-501.Where the paper says it
[9] S. Dodo, T. Asai, H. Koizumi, H. p. 9 Koganezawa, Proceedings of the International Conference on Power Engineering-13 (ICOPE-13), (2013),
496-501. Koizumi, H. Koizumi, H. Takahashi, S. Takahashi, S. Yoshida, H. Yoshida, H. Inoue, ASME J. Inoue, ASME J. Gas Turbines Power, 135, (2013),
011501.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
[10] T. Asai, S. Dodo, M. Karishuku, N. p. 9 Gas Turbines Power, 135, (2013),
011501. Karishuku, N. Karishuku, N. Akiyama, A. Akiyama, A. Hayashi, ASME J. Hayashi, ASME J. Gas Turbines Power, 137, (2015),
091504.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
[11] C. J. Lawn, Progress in Energy and Combustion Science 35 (2009) 1–30. p. 9 Gas Turbines Power, 137, (2015),
091504. Lawn, Progress in Energy and Combustion Science 35 (2009) 1–30.Where the paper says it
[12] J. Lee, N. I. Kim, Int. J. Hydrogen Energy 48 (2023) 37402-37414. p. 9 Lawn, Progress in Energy and Combustion Science 35 (2009) 1–30. Hydrogen Energy 48 (2023) 37402-37414.Where the paper says it
[13] D. Feikema, R. p. 9 Hydrogen Energy 48 (2023) 37402-37414. Feikema, R. Feikema, R. Driscoll, Combustion and Flame 86 (1991) 347–358.Where the paper says it
Where the paper says it
[14] A. Degeneve, R. p. 9 Driscoll, Combustion and Flame 86 (1991) 347–358. Degeneve, R. Degeneve, R. Vicquelin, C. Vicquelin, C. Schuller, Proc. Schuller, Proc. , 38, (2021), 5501-5508.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
[15] R. Cabra, T. Myhrvold, J. p. 9 , 38, (2021), 5501-5508. Myhrvold, J. Myhrvold, J. Karpetis and R. Karpetis and R. Barlow, Proc. Barlow, Proc. , 29, (2002),
1881-1888.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
[16] S. H. Chung, B. J. Lee, Combustion and Flame 86 (1991) 62-72. p. 9 , 29, (2002),
1881-1888. Lee, Combustion and Flame 86 (1991) 62-72.Where the paper says it
[17] D. S. Jeon, G. J. Hwang, H. J. Jang, N. I. Kim, Combustion and Flame 238 (2022) 111948. p. 9 Lee, Combustion and Flame 86 (1991) 62-72. Kim, Combustion and Flame 238 (2022) 111948.Where the paper says it
[18] S. M. Al-Noman, S. p. 9 Kim, Combustion and Flame 238 (2022) 111948. Al-Noman, S. Al-Noman, S. Chung, Combustion and Flame 171 (2016) 119–132.Where the paper says it
Where the paper says it
[19] P. C. Nassini, D. p. 9 Chung, Combustion and Flame 171 (2016) 119–132. Nassini, D. Nassini, D. Pampaloni, R. Pampaloni, R. Andreini, Combustion and Flame 229 (2021) 111391.Where the paper says it
Where the paper says it
Where the paper says it
[20] H. Zhang, E. Mastorakos, Flow Turbulence Combust (2016) 96:863–889. p. 9 Andreini, Combustion and Flame 229 (2021) 111391. Mastorakos, Flow Turbulence Combust (2016) 96:863–889.Where the paper says it
[21] T. Poinsot, S. p. 9 Mastorakos, Flow Turbulence Combust (2016) 96:863–889. Poinsot, S. Poinsot, S. Trouve, Prog. Trouve, Prog. Energy Combust. Energy Combust. , 21, (1996), 531-576.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
[22] P. Domingo, L. p. 9 , 21, (1996), 531-576. Domingo, L. Domingo, L. Vervisch, Proc. Lee, Combustion and Flame 86 (1991) 62-72. Kim, Combustion and Flame 238 (2022) 111948.Where the paper says it
Where the paper says it
Where the paper says it
[30] B. Yang, S.B. Pope, Combust. p. 9 Berlin, (2002), Springer. Pope, Combust. Pope, Combust. Flame, 112 (1-2), (1998), 16-32.Where the paper says it
Where the paper says it
[34] S. James, M.S. Anand, M.K. Razdan, S.B. Pope, ASME J. p. 9 html
[34] S. Pope, ASME J. Pope, ASME J. Gas Turbines Power, 123 (4), (2001), 747-756.Where the paper says it
Where the paper says it
[35] F. Qin, A. Shah, Z. Huang, L. Peng, P. Tunestal, X. p. 9 Gas Turbines Power, 123 (4), (2001), 747-756. Tunestal, X. Tunestal, X. Bai, Combust. Bai, Combust. Flame, 188 (1-2), (2018), 357-366.Where the paper says it
Where the paper says it
Where the paper says it
[40] Cantera, https://cantera. p. 0 The method is implemented in OpenFOAM and comprises five key components: (i) a simplified but representative
three‑dimensional sector geometry with a 30° domain to capture circumferential vortices at the mixing tube outlet,
(ii) boundary conditions and inlet velocity profiles that reproduce coaxial jet and preheated air conditions, (iii) a
reduced Yang–Pope reaction mechanism validated against GRI 3. 0 using Cantera laminar flame speed, ignition delay
and counterflow diffusion flame calculations, (iv) grid generation and convergence checks based on flame structure
and scalar dissipation rate, and (v) diagnostics including methane‑ and CO‑based flame indices to classify local
combustion modes near the mixing tube outlet.Where the paper says it
[42] N. Peters, Turbulent Combustion, Cambridge University Press, New York, 2000. p. 9 Lieuwen, V. Yang, Gas Turbine Emissions, Cambridge University Press, New York, 2013.Where the paper says it
[43] R. R. Cao, S. B. Pope, A.R. Masri, Combustion and Flame 142 (2005) 438–453. p. 0 Article information
Article title
Quasi‑DNS with chemical kinetics for near blow‑out dynamics of a single multi‑injection burner element for future
gas turbine applications
Authors
Kazuki Abe*
, Youhi Morii, Kaoru Maruta
Affiliations
Institute of Fluid Science, Tohoku University
Corresponding author’s email address and Twitter handle
kazuki. jp
Keywords
gas turbine combustor; coaxial burner with mixing tube; quasi-direct numerical simulation (Quasi-DNS); lean blowout (LBO); flame index; methane combustion
Related research article
For a published article:
K.Where the paper says it
[44] H. Yamashita, M. Shimada, T. Takeno, Proc. p. 9 Tachibana, J. Takeno, Proc. Energy Combust. , 21, (1996), 531-576.Where the paper says it
Where the paper says it
[45] S. Som, S. Aggarwal, Combust. p. 9 Andreini, Combustion and Flame 229 (2021) 111391. Mastorakos, Flow Turbulence Combust (2016) 96:863–889. Lefebvre, D. Ballal, Gas Turbine Combustion 3rd Edition, CRC Press, 2010.Where the paper says it
Where the paper says it
[2605.24226] The paper is titled Quasi‑DNS with chemical kinetics for near blow‑out dynamics of a single multi‑injection burner element for future gas turbine applications
.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improve RANS model accuracy for near blow-out analysis by incorporating Quasi-DNS insights, allowing AI systems to predict flame anchoring and local extinction phenomena more accurately than current Reynolds averaged Navier Stokes simulations.
-
Develop a reusable workflow for analyzing flame structure and stabilization in coaxial burners with mixing tubes by implementing the five key components described, enabling AI systems to directly adapt this methodology for other burner configurations.
-
Enhance the ability of AI systems to classify local combustion modes near the mixing tube outlet by utilizing methane-based and CO-based flame indices, allowing for a classification of combustion states as
premixed-like
ordiffusion-dominated.
-
Improve the prediction of heat release distribution by using time-averaged Quasi-DNS fields to show that for partially premixed cases, Quasi-DNS predicts a
downstream shift and broadening of the heat-release distribution compared to RANS,
providing a more nuanced understanding than current RANS predictions. -
Establish a grid resolution metric for Quasi-DNS simulations by using the scalar dissipation rate as an indicator of adequate resolution, enabling AI systems to automatically verify grid convergence based on flame structure and scalar dissipation rate.
Abstract
We develop a Quasi-DNS with chemical kinetics for a stable lean condition in a single multiple-injection burner element for future gas turbine applications, as a reusable workflow for a coaxial mixing-tube burner. Here, Quasi-DNS denotes a high-resolution, turbulence-model-free calculation; it is not DNS in the strict sense. The OpenFOAM-based method includes: (i) a simplified 30deg sector geometry capturing vortices at the mixing tube outlet, (ii) boundary conditions reproducing coaxial jets and preheated air, (iii) a reduced Correa methane-air mechanism compared with GRI 3.0 using Cantera, (iv) mesh-development and grid-sensitivity assessment based on flame structure and the squared gradient of mixture fraction, and (v) post-processing with methane-based flame index. Demonstration at an equivalence ratio phi = 0.45 shows limited in-tube mixing and strong outlet vortices, yielding a more extended heat release region than the RANS solution. - A reusable high-resolution, turbulence-model-free Quasi-DNS workflow with detailed methane-air chemistry is developed for a coaxial mixing-tube burner. - The workflow combines a reduced methane-air mechanism, refined sector-domain meshes, and scalar-field diagnostics for characterizing mixing and heat release regions. - The workflow enables analysis of mixing and flame stabilization under stable lean conditions, and provides a high-resolution numerical reference under the stated assumptions for comparison with RANS-based calculations.
Related papers
- Data-driven impeller model for efficient large eddy simulations of metastable von K'arm'an flows
- Numerical study of nitrogen oxides chemistry during plasma assisted combustion in a sequential combustor
- Emergent Transfer of a Physics Foundation Model from Simulation to Laboratory Turbulence
- Early onset of secondary shear instability in Kelvin-Helmholtz braids at high Reynolds number
- Rotational covariance, continuous spectrum and non-modal growth of three-dimensional planar weak viscous shock layers
- Deep Learning-based Algebraic Reynolds Stress Closures for RANS Simulations of Turbulent Flows