High Frame-Rate Mid-Infrared SPAD Camera

arXiv:2605.04276 · physics.optics · Submitted 2026-05-05 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "High Frame-Rate Mid-Infrared SPAD Camera".

Mira: Here's the gist of the paper. Single-photon avalanche diode (SPAD) arrays have fundamentally reshaped optical imaging by enabling true photon counting with picosecond temporal resolution, high frame rates, and digital noise-free readout.

Kai: This work demonstrates the first mid-IR SPAD camera by integrating broadband adiabatic frequency upconversion with a 512 × 512 Silicon SPAD array.

Mira: The Technological Gap Addressed SPAD imaging remains largely confined to the visible and near-infrared spectral ranges, leaving the mid-infrared, the spectral region hosting the fundamental vibrational signatures of most molecules, largely inaccessible.

Kai: Conventional detectors in this mid-IR region typically require cryogenic cooling and do not support photon-counting or ultrahigh frame rates.

Paper summary: Kai: So, to recap, the paper "High Frame-Rate Mid-Infrared SPAD Camera" is about integrating upconversion with silicon SPAD arrays to achieve photon counting in the mid-infrared at room temperature for the first time. The authors argue that this bridges a technological gap where conventional mid-infrared detectors are too slow or require cooling, but this method lets them access chemically specific information.

Mira: They claim that by coupling the upconversion platform to the silicon SPAD array, they can map a wide mid-infrared bandwidth into the visible near-infrared domain in a single exposure. This is key because it bypasses the limitations of using cryogenic detectors for these applications.

Lev: The core thesis is proving that this architecture allows for photon counting and high frame rates across the two to five micrometer band at room temperature, which they demonstrate with their system running up to sixty thousand frames per second. That speed is what makes it useful for dynamic processes where you need to track fast changes.

Kai: The paper shows they are using a filtered blackbody source spanning the two to five micrometer range for illumination, and they use dichroic filtering to reject residual pump and mid-infrared light before hitting the silicon SPAD array. This ensures they are only recording the upconverted image effectively.

Mira: They also detail how they implement spectral sectioning by inserting those narrowband filters in the visible domain after the upconversion, which corresponds to a wider spectral window in the mid-infrared range because of energy conservation principles.

Lev: The limitation they state is that each frame is essentially a one bit image because of the dead time and binary operation of SPAD pixels, but they overcome this by synchronizing acquisition to external events with picosecond precision to sum up frames for high sensitivity.

Kai: What does this mean for us in terms of what we can actually measure? It means we can probe nanosecond-scale thermal emission dynamics directly in the mid-infrared without needing complex cooling apparatus, which is a huge architectural win.

Mira: It also opens up opportunities for time correlated and lifetime resolved measurements because they have that picosecond precision synchronization capability built into the acquisition scheme itself.

Lev: For real hardware implementation, what this implies is that we're looking at a compact architecture with no moving parts or complex cooling needed, which is fantastic for scalability compared to traditional cryogenic mid-IR setups.

Kai: So, the main point is demonstrating a viable path to photon-counting mid-infrared imaging using established silicon detector technology through frequency upconversion. Now that we know what they built, let’s look at what this means for the broader picture of mid-IR sensing and how it compares to other approaches.

Conclusion: Mira: So wrapping up the "High Frame-Rate Mid-Infrared SPAD Camera" paper by Ziv Abelson and colleagues, they've shown that integrating adiabatic frequency upconversion with a five hundred twelve by five hundred twelve silicon SPAD array successfully achieves high frame-rate photon counting in the two to five micrometer band at room temperature.

Kai: What this really means is that we've defined a new experimental regime right at the intersection of single photon detection and infrared photonics, allowing us to probe fast energy deposition and heat transport directly in the mid-infrared.

Lev: The ability to capture spatially resolved nanosecond scale thermal emission dynamics without needing complex cooling apparatus illustrates how this architecture can be used for probing fast energy deposition and heat transport directly in the mid-infrared.

Mira: It’s a compact, small footprint architecture that doesn't rely on moving parts or complicated cooling apparatus, which is a huge advantage when you think about scaling this kind of sensor for practical environmental or medical monitoring tools.

Kai: The paper moves us toward a system where we can perform these kinds of measurements in a way that is much more accessible than the traditional cryogenic methods currently used for mid-infrared detection.

Lev: This platform opens up real opportunities for time correlated and lifetime resolved measurements because the synchronization is built in, which is critical when you want to resolve those fast non equilibrium thermal processes we've been trying to study.

Mira: Ultimately, this work defines a new way to approach mid-infrared sensing that leverages existing silicon detector technology by using frequency upconversion as the bridge into a spectral region previously inaccessible for high-speed photon counting.

Ziv Abelson, Daniel Beitner, Ziv Livne, Eyal Hollander, Moshe Cohen Erner, Edoardo Charbon, Haim Suchowski

Tel-Aviv University · Spiral Photonics LTD, Herzliya, Israel

physics.optics

Submitted: 2026-05-05

Updated: 2026-11-07

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 82/100

The gist: Single-photon avalanche diode (SPAD) arrays have fundamentally reshaped optical imaging by enabling true photon counting with picosecond temporal resolution, high frame rates…

Key concepts

SPAD Arrays
Single-photon avalanche diodes are detectors that can count individual photons with picosecond timing. This technology allows for high frame rates and noise-free digital readout, fundamentally changing how optical images are captured by counting every single light particle.
Frequency Upconversion
This technique uses an adiabatic poled lithium niobate crystal to convert low-energy mid-IR photons into higher-energy visible or near-infrared photons. This allows the system to utilize readily available, high-speed silicon SPADs that are sensitive in those longer wavelengths.
Mid-Infrared Imaging Gap
Traditional detectors struggle with mid-infrared light because it requires expensive cryogenic cooling and lacks fast photon counting capabilities. This paper solves this gap by using upconversion to bring the mid-IR signal into a range where high-speed, room-temperature SPADs can operate effectively.
Adiabatic Quasi-Phase Matching
This is a specific method of crystal engineering that ensures efficient conversion of light across a wide range of frequencies and angles. It allows the system to map a broad mid-IR bandwidth into the visible/near-IR domain in one step, ensuring robust performance without needing precise tuning.

Terminology

Summary

Single-photon avalanche diode (SPAD) arrays have fundamentally reshaped optical imaging by enabling true photon counting with picosecond temporal resolution, high frame rates, and digital noise-free readout. p. 0 This work demonstrates the first mid-IR SPAD camera by integrating broadband adiabatic frequency upconversion with a 512 × 512 Silicon SPAD array. p. 0

The Technological Gap Addressed

SPAD imaging remains largely confined to the visible and near-infrared spectral ranges, leaving the mid-infrared, the spectral region hosting the fundamental vibrational signatures of most molecules, largely inaccessible. Conventional detectors in this mid-IR region typically require cryogenic cooling and do not support photon-counting or ultrahigh frame rates. p. 1 This technological gap is consequential because mid-IR light provides chemically specific contrast inaccessible at shorter wavelengths. p. 1 The authors bridge this gap by coupling a broadband adiabatic frequency upconversion platform to a silicon SPAD array to realize a first high-frame-rate mid-IR SPAD camera. p. 1

The Upconversion Mechanism

To access the mid-infrared, the paper employs broadband frequency upconversion based on an adiabatically poled lithium niobate (APLN) crystal in an imaging configuration pumped by a Qswitched 1064 nm laser. The APLN crystal implements adiabatic quasi-phase-matching that maintains efficient conversion over a broad spectral and angular range, enabling robust frequency photon-to-photon conversion without fine-tuning. p. 1 This design allows for mapping a wide mid-IR bandwidth into the visible–near-infrared domain in a single exposure. p. 2

Imaging and Data Acquisition

The system uses a 512 × 512 SPAD array to demonstrate broadband mid-IR imaging at frame rates up to 60,000 frames per second. Spectral sectioning of the mid-IR signal is implemented by inserting narrowband filters in the visible after upconversion, which corresponds to a broader spectral window in the mid-IR range due to energy conservation. p. 2 The additive photon-counting scheme allows for summation of multiple frames, yielding high-sensitivity images with ultralow noise. p. 2

Ultrafast Dynamics and Potential

The platform captures nanosecond-scale laser-induced heating and cooling dynamics via weak mid-IR blackbody emission. The results reveal cooling dynamics that extend well beyond the excitation pulse duration, showing rapid cooling followed by a weaker steady-state temperature. p. 3 This establishes a scalable platform for photon-resolved, ultrafast mid-infrared imaging. p. 1 The architecture opens opportunities for time-correlated and lifetime-resolved measurements and the investigation of non-equilibrium thermal and emissive processes. p. 4

Conclusion

The integration of adiabatic frequency upconversion with large-format silicon SPAD arrays enables photon-counting, high-frame-rate imaging across the 2–5 µm band at room temperature. This platform defines a new experimental regime at the intersection of single-photon detection and infrared photonics. p. 4 The ability to capture spatially resolved nanosecond-scale thermal emission dynamics illustrates the broader potential of this architecture for probing fast energy deposition and heat transport directly in the mid-infrared. p. 4 The system operates in a compact, small-footprint architecture with no moving parts or complex cooling apparatus. p. 1

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. High-speed mid-infrared thermal dynamics capture: The improved AI system can capture nanosecond-scale laserinduced thermal dynamics via weak mid-IR blackbody emission with frame rates up to 60,000 frames per second and spatial resolution of 35 micrometers throughout the 2 to 5 micrometer band.

  2. Material discrimination based on thermal signatures: The system can perform material discrimination based on time-resolved mid-IR thermal signatures by analyzing the cooling dynamics that vary markedly across different metals, reflecting differences in specific heat, thermal conductivity, and heat diffusion length.

  3. Ultrafast non-equilibrium process investigation: The improved AI system enables the investigation of non-equilibrium thermal and emissive processes with simultaneous spatial, spectral, and temporal resolution, allowing researchers to study fast energy deposition directly in the mid-infrared.

Related papers