High Frame-Rate Mid-Infrared SPAD Camera
summary
The gist
Single-photon avalanche diode (SPAD) arrays have fundamentally reshaped optical imaging by enabling true photon counting with picosecond temporal resolution, high frame rates…
In short
This work presents a new mid-infrared SPAD camera by combining broadband frequency upconversion with a 512x512 silicon SPAD array. It overcomes the limitation of existing detectors that can only see visible/near-IR light. The system achieves high frame rates (up to 60,000 fps) and photon counting at room temperature, allowing for the first spatially resolved imaging of nanosecond-scale thermal dynamics in the mid-IR.
Key concepts
- SPAD Arrays
- Single-photon avalanche diodes are detectors that can count individual photons with picosecond timing. This technology allows for high frame rates and noise-free digital readout, fundamentally changing how optical images are captured by counting every single light particle.
- Frequency Upconversion
- This technique uses an adiabatic poled lithium niobate crystal to convert low-energy mid-IR photons into higher-energy visible or near-infrared photons. This allows the system to utilize readily available, high-speed silicon SPADs that are sensitive in those longer wavelengths.
- Mid-Infrared Imaging Gap
- Traditional detectors struggle with mid-infrared light because it requires expensive cryogenic cooling and lacks fast photon counting capabilities. This paper solves this gap by using upconversion to bring the mid-IR signal into a range where high-speed, room-temperature SPADs can operate effectively.
- Adiabatic Quasi-Phase Matching
- This is a specific method of crystal engineering that ensures efficient conversion of light across a wide range of frequencies and angles. It allows the system to map a broad mid-IR bandwidth into the visible/near-IR domain in one step, ensuring robust performance without needing precise tuning.
Terminology used across episodes
This episode discusses
The paper
High Frame-Rate Mid-Infrared SPAD Camera · Read on arXiv
Ziv Abelson, Daniel Beitner, Ziv Livne, Eyal Hollander, Moshe Cohen Erner, Edoardo Charbon, Haim Suchowski
Tel-Aviv University · Spiral Photonics LTD, Herzliya, Israel
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: We're looking at the paper: "High Frame-Rate Mid-Infrared SPAD Camera".
Mira: Here's the gist of the paper. Single-photon avalanche diode (SPAD) arrays have fundamentally reshaped optical imaging by enabling true photon counting with picosecond temporal resolution, high frame rates, and digital noise-free readout.
Kai: This work demonstrates the first mid-IR SPAD camera by integrating broadband adiabatic frequency upconversion with a 512 × 512 Silicon SPAD array.
Mira: The Technological Gap Addressed SPAD imaging remains largely confined to the visible and near-infrared spectral ranges, leaving the mid-infrared, the spectral region hosting the fundamental vibrational signatures of most molecules, largely inaccessible.
Kai: Conventional detectors in this mid-IR region typically require cryogenic cooling and do not support photon-counting or ultrahigh frame rates.
Paper summary: Kai: So, to recap, the paper "High Frame-Rate Mid-Infrared SPAD Camera" is about integrating upconversion with silicon SPAD arrays to achieve photon counting in the mid-infrared at room temperature for the first time. The authors argue that this bridges a technological gap where conventional mid-infrared detectors are too slow or require cooling, but this method lets them access chemically specific information.
Mira: They claim that by coupling the upconversion platform to the silicon SPAD array, they can map a wide mid-infrared bandwidth into the visible near-infrared domain in a single exposure. This is key because it bypasses the limitations of using cryogenic detectors for these applications.
Lev: The core thesis is proving that this architecture allows for photon counting and high frame rates across the two to five micrometer band at room temperature, which they demonstrate with their system running up to sixty thousand frames per second. That speed is what makes it useful for dynamic processes where you need to track fast changes.
Kai: The paper shows they are using a filtered blackbody source spanning the two to five micrometer range for illumination, and they use dichroic filtering to reject residual pump and mid-infrared light before hitting the silicon SPAD array. This ensures they are only recording the upconverted image effectively.
Mira: They also detail how they implement spectral sectioning by inserting those narrowband filters in the visible domain after the upconversion, which corresponds to a wider spectral window in the mid-infrared range because of energy conservation principles.
Lev: The limitation they state is that each frame is essentially a one bit image because of the dead time and binary operation of SPAD pixels, but they overcome this by synchronizing acquisition to external events with picosecond precision to sum up frames for high sensitivity.
Kai: What does this mean for us in terms of what we can actually measure? It means we can probe nanosecond-scale thermal emission dynamics directly in the mid-infrared without needing complex cooling apparatus, which is a huge architectural win.
Mira: It also opens up opportunities for time correlated and lifetime resolved measurements because they have that picosecond precision synchronization capability built into the acquisition scheme itself.
Lev: For real hardware implementation, what this implies is that we're looking at a compact architecture with no moving parts or complex cooling needed, which is fantastic for scalability compared to traditional cryogenic mid-IR setups.
Kai: So, the main point is demonstrating a viable path to photon-counting mid-infrared imaging using established silicon detector technology through frequency upconversion. Now that we know what they built, let’s look at what this means for the broader picture of mid-IR sensing and how it compares to other approaches.
Conclusion: Mira: So wrapping up the "High Frame-Rate Mid-Infrared SPAD Camera" paper by Ziv Abelson and colleagues, they've shown that integrating adiabatic frequency upconversion with a five hundred twelve by five hundred twelve silicon SPAD array successfully achieves high frame-rate photon counting in the two to five micrometer band at room temperature.
Kai: What this really means is that we've defined a new experimental regime right at the intersection of single photon detection and infrared photonics, allowing us to probe fast energy deposition and heat transport directly in the mid-infrared.
Lev: The ability to capture spatially resolved nanosecond scale thermal emission dynamics without needing complex cooling apparatus illustrates how this architecture can be used for probing fast energy deposition and heat transport directly in the mid-infrared.
Mira: It’s a compact, small footprint architecture that doesn't rely on moving parts or complicated cooling apparatus, which is a huge advantage when you think about scaling this kind of sensor for practical environmental or medical monitoring tools.
Kai: The paper moves us toward a system where we can perform these kinds of measurements in a way that is much more accessible than the traditional cryogenic methods currently used for mid-infrared detection.
Lev: This platform opens up real opportunities for time correlated and lifetime resolved measurements because the synchronization is built in, which is critical when you want to resolve those fast non equilibrium thermal processes we've been trying to study.
Mira: Ultimately, this work defines a new way to approach mid-infrared sensing that leverages existing silicon detector technology by using frequency upconversion as the bridge into a spectral region previously inaccessible for high-speed photon counting.
More episodes
- 2611.14082-Two atoms with strong light-induced dipolar interactions
- 2611.14040-Characterization of BNLs 20 and 30 micrometer thick LGADs for the Electron Ion Collider
- 2611.13399-Lift-element-based dynamic network of vortex gust-airfoil interactions
- 2611.13476-Hopfion Superlattices in 3D Twisted Moir'e Light Fields
- 2611.13642-Investigation of the timing performance of double-sided p-type 3D silicon sensors produced by CNM
- 2611.13830-SiPM optical readout of a PICOSEC Micromegas precise timing detector
- 2611.14152-Where are the shortest-path nodes in spatial networks?
- 2611.14219-Sub-Ice: semi-automated mapping of basal channels from ice shelf surface elevation data
- 2611.16341-SUMNO: Spatially Unrolled Multigrid Neural Operator for Fluid Flow Surrogates
- 2611.16090-Multi-UTE Myelin Fraction Mapping: Repeatability and Cross-Field-Strength Reproducibility at 1.5T and 3T