Ultrashort pulsed laser atmospheric filament properties and microwave radiation inferred from S-band guided wave interaction and self-emission

summary

The gist

The electrical conductivity of the plasma filament left behind by an ultrashort pulsed laser (USPL) optical pulse after it is geometrically then self-focused in air via the Kerr effect is measured by…

In short

The study measures plasma filament properties left by ultrashort pulsed lasers by analyzing its interaction with an S-band waveguide and self-emission signals. By measuring the filament's radius (R), electrical conductivity ($\sigma$), and current time integral (Q) across various pressures, the research infers local plasma conditions like electron temperature (T) and densities ($n_i$). This allows for benchmarking 3D simulations of filamentation and radiation.

Key concepts

Characteristic Radius R
This is the physical size of the plasma filament created by the laser pulse. It is measured using visible light imaging, providing a spatial constraint on the plasma structure. The paper notes that a Gaussian shape fits better than a simple cylinder model.
Electrical Conductivity $\sigma$
The conductivity of the filament is determined by observing how it attenuates an S-band waveguide mode. This measurement is used to infer local electron temperature (T) and densities ($n_1, n_2$) through established physical models linking these properties to the measured attenuation.
Total Time Integral Q
Q represents the total time integral of the filament's axial current, derived from self-emission within the waveguide. This value is crucial for modeling radiation. Comparing different estimates of Q helps determine the filament's current decay rate ($\nu$) and its effect on far-field radiation.
Far Field Radiation Analysis
The paper models the far-field electric field ($E_{0\theta}$) radiated by the filament as a collective effect. This analysis links the measured Q(z) to radiation patterns, helping to determine parameters like $\nu_{max}$ that describe how laser energy is converted into microwave radiation.

Terminology used across episodes

This episode discusses

The paper

Ultrashort pulsed laser atmospheric filament properties and microwave radiation inferred from S-band guided wave interaction and self-emission · Read on arXiv

Air Force Research Laboratory

The electrical conductivity σ of the plasma filament left behind by an ultrashort pulsed laser (USPL) optical pulse after it is geometrically then self-focused in air via the Kerr effect is measured by attenuation of a 3.2 GHz TE 10 mode within an S-band waveguide through which the filament passes, taking into account the characteristic radius R of the filament, as determined by fast camera visible light imaging. Models of the major air constituents' ionization rate W i vs. local laser intensity I, and of electron temperature T and mean axial electron momentum p z vs. peak laser intensity I 0 are then used to infer a hypothetical steady state filament's I 0, T, major species particle densities, and assumed axially invariant current time integral Q and current decay rate ν after pulse passage. Q is independently measured via the filament's self-emission signal in the waveguide for comparison. The theoretical far field microwave radiation pattern due to the actual axial variation in Q=Q (z) is compared favorably to published measurements. A much lower upper bound on ν is inferred once such radiation is taken into account. Results are presented along a 30 cm long filament at a broad range of atmospheric pressures.

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "Ultrashort pulsed laser atmospheric filament properties and microwave radiation inferred from S-band guided wave interaction and self-emission".

Mira: Here's the gist of the paper. The electrical conductivity of the plasma filament left behind by an ultrashort pulsed laser (USPL) optical pulse after it is geometrically then self-focused in air via the Kerr effect is measured by attenuation of a 3.2 GHz TE10 mode within an S-band waveguide through which the filament passes, taking into account the characteristic radius R of the filament, as determined by fast camera visible light imaging <ref:2607.10852#pg2> The goal of this paper is to infer local and far field properties based on measurements of the characteristic radius R (by visible light imaging), electrical conductivity σ (by interaction of the filament with the TE10 mode of an S-band waveguide) and the total time integral Q of the filament’s axial current (from filament self-emission within the waveguide) over a wide range of background pressures p and distances along such a filament z <ref:2607.10852#pg2> Inferring Filament Parameters The paper details how local and far field properties are inferred by measuring the characteristic radius R, electrical conductivity σ, and the total time integral Q of the filament’s axial current <ref:2607.10852#pg4>.

Kai: The relationship for electrical conductivity is given by σ = σ (n1,n2,T) (assembled from several references) which depends on electron temperature T and the densities ni (i = 1,2) of electrons released from O2 and N2 <ref:2607.10852#pg4>.

Mira: The authors use ionization rates Wi = Wi(I) of O2 and N2 vs.

Kai: local laser intensity I, and electron temperature T = T (I0) vs.

Title and authors: Kai: The paper we are looking at is called "Ultrashort pulsed laser atmospheric filament properties and microwave radiation inferred from S-band guided wave interaction and self-emission". It’s a pretty long title, but it tells you everything we need to know about the main goals.

Mira: Yeah, the authors are Ruden, Wymer, Elle, Englesbe, Lucero, Thornton and Schmitt-Sody. They seem to be pulling together expertise from different areas of plasma physics and experimental optics.

Lev: From what I've read on page one of this paper here, they’re using the electrical conductivity sigma measured by attenuation of a three point two gigahertz TE10 mode in an S band waveguide through which the filament passes, taking into account the characteristic radius R determined by fast camera visible light imaging <ref:2607.10852#pg1,an S band waveguide through which the filament passes, taking into account>.

Kai: Right. So they're measuring that conductivity and using that to get information about the plasma structure, and they’re also getting the radius from a separate visible light measurement on page one of this paper here <ref:2607.10852#pg1>.

Mira: And the big implication here is that they are trying to infer local properties like peak laser intensity I0, electron temperature T, major species particle densities, and that axial current time integral Q after pulse passage.

Lev: That means they're using models for the ionization rates of oxygen and nitrogen versus local laser intensity versus temperature to find those fundamental parameters I0, n1, and T by inverting those conductivity measurements from page four of this paper here <ref:2607.10852#pg2>.

Kai: So that’s where the real work is, using those ionization rates of oxygen and nitrogen versus local laser intensity versus temperature to find those fundamental parameters I0, n1, and T from the conductivity measurements through inversion.

Mira: And they also provide an estimate for the mean postoptical axial electron momentum, pz versus peak laser intensity I0 on page four of this paper here <ref:2607.10852#pg2>. That’s a useful piece of information for understanding how the electrons move after the pulse.

Lev: That means they are using models for the ionization rates of oxygen and nitrogen versus local laser intensity versus temperature to find those fundamental parameters I0, n1, and T by inverting those conductivity measurements from page four of this paper here <ref:2607.10852#pg2>.

Kai: It’s interesting because they mention that the filament is not well-represented by a round cylinder of uniform conductivity in their simulations, suggesting a Gaussian makes a better fit on page four of this paper here <ref:2607.10852#pg2>.

Mira: Right. That's an important caveat because it means the simple model they use isn't perfectly capturing what’s happening physically.

Lev: And that means the real work is using those models for the ionization rates of oxygen and nitrogen versus local laser intensity versus temperature to find those fundamental parameters I0, n1, and T by inverting those conductivity measurements from page four of this paper here <ref:2607.10852#pg2>.

Kai: So, we’re setting up the framework where they measure the electrical conductivity sigma from attenuation of a three point two gigahertz TE10 mode in an S band waveguide through which the filament passes, taking into account the characteristic radius R determined by fast camera visible light imaging <ref:2607.10852#pg1,an S band waveguide through which the filament passes, taking into account>.

Mira: That's how they are setting up the framework where they measure the electrical conductivity sigma from attenuation of a three point two gigahertz TE10 mode in an S band waveguide through which the filament passes, taking into account the characteristic radius R determined by fast camera visible light imaging <ref:2607.10852#pg1,an S band waveguide through which the filament passes, taking into account>.

Lev: And we need to remember that we're looking at how they use those models for the ionization rates of oxygen and nitrogen versus local laser intensity versus temperature to find those fundamental parameters I0, n1, and T by inverting those conductivity measurements from page four of this paper here <ref:2607.10852#pg2>.

Kai: And that means they are using models for the ionization rates of oxygen and nitrogen versus local laser intensity versus temperature to find those fundamental parameters I0, n1, and T by inverting those conductivity measurements from page four of this paper here <ref:2607.10852#pg2>.

The paper's summary: Kai: Okay, so let's talk about what they actually did in the paper. They are using measurements to measure that electrical conductivity sigma from attenuation of a three point two gigahertz TE10 mode in an S band waveguide through which the filament passes, taking into account the characteristic radius R determined by fast camera visible light imaging <ref:2607.10852#pg1,an S band waveguide through which the filament passes, taking into account>.

Mira: And they are also getting that characteristic radius R from a separate visible light measurement on page one of this paper here, and then they use that conductivity to infer local properties like peak laser intensity I0, electron temperature T, major species particle densities, and the axial current time integral Q <ref:2607.10852#pg1,T$, major species particle densities, and>.

Lev: And they are using models for the ionization rates of oxygen and nitrogen versus local laser intensity versus temperature to find those fundamental parameters I0, n1, and T by inverting those conductivity measurements from page four of this paper here <ref:2607.10852#pg2>.

Mira: And they use the self-emission signal within the waveguide to determine that total time integral Q over a wide range of background pressures and distances z along such a filament where z is less than some value mentioned on page two <ref:2607.10852#pg2>.

Kai: So, they’re using models for the ionization rates of oxygen and nitrogen versus local laser intensity versus temperature to find those fundamental parameters I0, n1, and T by inverting those conductivity measurements from page four of this paper here <ref:2607.10852#pg2>.

Kai: They are using models for the ionization rates of oxygen and nitrogen versus local laser intensity versus temperature to find those fundamental parameters I0, n1, and T by inverting those conductivity measurements from page four of this paper here <ref:2607.10852#pg2>.

The paper's improvements: Kai: Now, moving into the improvements they suggest, they suggest using this framework to compare theoretical far field microwave radiation patterns due to axial current variation Q with published measurements.

Mira: They are using the measurement of that total time integral Q over a wide range of background pressures and distances z along such a filament where z is less than some value mentioned on page two to model the far field radiation as a collective effect of the entire filament with principle frequency f1 <ref:2607.10852#pg2>.

Lev: And they are using that measurement of that total time integral Q over a wide range of background pressures and distances z along such a filament where z is less than some value mentioned on page two to model the far field radiation as a collective effect of the entire filament with principle frequency f1 <ref:2607.10852#pg2>.

Kai: This modeling shows that the resulting electric field E0 theta decreases rapidly with increasing theta until theta equals sixty degrees where it crosses zero, and doesn’t rise significantly beyond that.

Mira: That means that the value of nu = nu max that results in K R with this minimum angle equal to K0, which is defined as the integral of U0 over z, corresponds to the full conversion of laser-imparted center of mass kinetic energy to radiation with theta greater than or equal to that minimum angle.

Lev: And they also show that this value nu = nu max results in K R with this minimum angle equal to K0, which is defined as the integral of U0 over z, corresponds to the full conversion of laser-imparted center of mass kinetic energy to radiation with theta greater than or equal to that minimum angle.

Kai: It seems like they're using this relationship between nu = nu max and the minimum angle, theta min, which is what links all these pieces together.

Kai: And they also show that this value nu = nu max results in K R with this minimum angle equal to K0, which is defined as the integral of U0 over z.

Mira: And they are using the measurement of that total time integral Q over a wide range of background pressures and distances z along such a filament where z is less than some value mentioned on page two to model the far field radiation as a collective effect of the entire filament with principle frequency f1 <ref:2607.10852#pg2>.

Kai: It sounds like they're using this relationship between nu = nu max and the minimum angle, theta min, which is what links all these pieces together.

Conclusion: Mira: So, to wrap up on the paper "Ultrashort pulsed laser atmospheric filament properties and microwave radiation inferred from S-band guided wave interaction and self-emission". They’re showing that the Q measurement, which serves as the basis for Equation thirty-five may be considered accurate for values of nu as low as nu max since it is an S band diagnostic.

Kai: And they also note that the correlation of experimental VR is very good up to t1 = one point four nanoseconds, so this value is used for the integration limit there.

Lev: From an engineering perspective, it’s important to remember that the Q measurement, which serves as the basis for Equation thirty-five may be considered accurate for values of nu as low as nu max since it is an S band diagnostic.

Kai: They also say that the comparison of Figure fifteen to Figure E3a suggests that the former represents a baseline response of the far field to the wake field current that explicitly neglects the oscillatory modes recorded by the latter.

Mira: And they note that this neglect means there might be greater undershoot or slow oscillation during subsequent decay not being present in our model.

Kai: And they also say that this neglect means there might be greater undershoot or slow oscillation during subsequent decay not being present in our model.

Mira: So, the paper "Ultrashort pulsed laser atmospheric filament properties and microwave radiation inferred from S-band guided wave interaction and self-emission" gives us a way to look at these plasma filaments not just as transient events, but to really map out their physical properties and what they radiate into space.

Lev: And this framework is useful for connecting the local physics inside the plasma, like temperature and density, to what we measure externally in a waveguide.

Kai: Yeah, that's the big picture here; understanding how those things are related across different scales.

More episodes

← Home