Ultra-low loss piezo-optomechanical low-confinement silicon nitride platform for visible wavelength quantum photonic circuits

summary

The gist

Realizing photonic quantum computing at scale requires integrated circuits that combine ultra-low loss with fast, low-power, low-hysteresis, and low-crosstalk reconfiguration.

In short

This work developed a low-loss silicon nitride platform using piezooptomechanical actuation and CMOS processes for visible light quantum circuits. It achieved 2.6 dB/m propagation loss, MHz modulation bandwidth, and negligible hysteresis. This scalable architecture enables deep, actively reconfigurable quantum photonic circuits essential for future quantum routers and memories.

Key concepts

Low-confinement silicon nitride waveguides
These are optical pathways made from silicon nitride that are designed to have very low signal loss. They allow high optical power handling and a wide range of light wavelengths to pass through efficiently, which is crucial for building scalable quantum circuits.
Piezooptomechanical actuation
This technique uses piezoelectric materials that change shape when an electric voltage is applied. When integrated with the waveguide, this allows precise control over the optical path length, enabling fast and low-hysteresis reconfiguration of the circuit's properties.
Voltage–Loss Product (VLP)
The VLP is a single metric used to evaluate modulator performance by combining voltage and loss. Minimizing this product helps optimize the design, balancing the electrical control required to change the light path against minimizing unwanted signal attenuation.

Terminology used across episodes

This episode discusses

The paper

Ultra-low loss piezo-optomechanical low-confinement silicon nitride platform for visible wavelength quantum photonic circuits · Read on arXiv

Mayank Mishra, Gwangho Choi, Wenhua He, Gina M. Talcott, Katherine Kearney, Michael Gehl, Andrew Leenheer, Daniel Dominguez

James C Wyant College of Optical Sciences, University of Arizona, Tucson, Arizona and Microsystems Engineering Science and Applications Sandia National Laboratories Albuquerque, New Mexico and Electrical Computer and Energy Engineering University of Colorado Boulder

Realizing photonic quantum computing at scale requires integrated circuits that combine ultra-low loss with fast, low-power, low-hysteresis, and low-crosstalk reconfiguration. These requirements are particularly challenging at visible wavelengths, where many quantum resource-state generators, including single-photon sources and quantum memories, naturally operate. Low-confinement silicon nitride waveguides offer the requisite loss performance, but conventional thermo-optic modulators dissipate significant static power, driving thermal crosstalk and precluding cryogenic operation. Visible-wavelength piezo-optomechanical circuits avoid these drawbacks, but existing demonstrations rely either on high-confinement waveguides with propagation losses of 35-100 dB/m, or on low-confinement platforms using foundry-incompatible PZT. Here we combine piezo-optomechanical actuation with a CMOS-foundry-fabricated, low-confinement silicon nitride platform, achieving 2.6 dB/m propagation loss at 780 nm, megahertz-scale modulation bandwidth, a half-wave voltage-length product of 2.8 Vm, and negligible hysteresis. We demonstrate reconfigurable Mach-Zehnder interferometers with 0.63 dB loss per spiral phase shifter, enabling deep, actively reconfigurable visible-wavelength quantum photonic circuits.

DOI: 10.1038/s41467-026-77969-0

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "Ultra-low loss piezo-optomechanical low-confinement silicon nitride platform for visible wavelength quantum photonic circuits".

Title and authors: Kai: So we're looking at this paper today, "Ultra-low loss piezo-optomechanical low-confinement silicon nitride platform for visible wavelength quantum photonic circuits." It’s about building the actual hardware that we need for scalable quantum computing.

Mira: Yeah, the focus here is on solving a big problem: getting ultra-low loss while still having the fast, low-power reconfiguration needed for these systems. The authors are combining two things: low-confinement silicon nitride waveguides with piezooptomechanical actuation.

Lev: From my side, I’m wondering if this platform is actually manufacturable at scale. We've seen promises before from AlN based platforms, so the real question is whether this Si3N4 approach holds up in terms of integration and reliability for real hardware.

Kai: Exactly, Lev. What they’re showing here with silicon nitride waveguides gives us that low loss performance we need at seven hundred eighty nanometers, which is right in that visible wavelength quantum regime where many important components live.

Mira: And the authors are pushing the limits on how much of a circuit you can fit into that tiny footprint while keeping the loss down. It sounds like they are tackling the fundamental trade-off between confinement and efficiency.

Lev: I'm paying close attention to how they define their metrics, especially things like propagation loss in decibels per meter and the voltage length product, because those are what we actually need to calculate overhead on a real chip.

The paper's summary: Kai: Okay, so the paper lays out a platform that achieves two point six dB per meter of propagation loss at seven hundred eighty nanometers using this silicon nitride setup and piezooptomechanical control. They also report a megahertz-scale modulation bandwidth, which is pretty fast for visible light applications.

Mira: And they’re not just reporting the loss; they are showing how they integrate thermo-optic modulators and PZT actuators with the low-confinement silicon nitride waveguides, and it seems both approaches have some significant limitations that this new combination tries to overcome.

Lev: From an error correction standpoint, I'm interested in how this translates to a functional circuit. They mention reconfigurable Mach–Zehnder interferometers where you get zero point six three dB loss per spiral phase shifter, which is important information for calculating the total loss budget of a larger processor.

Kai: And they show that this setup has negligible hysteresis, which is a huge deal because hysteresis messes up your control and stability in these kinds of devices. It’s not just about the static performance; it’s about how well it reconfigures dynamically.

Mira: I think the main point is that this combination offers a way to get deep, actively reconfigurable quantum photonic circuits at visible wavelengths, which is exactly what we want for on-chip quantum memories and routers. It moves us away from just using high-confinement platforms because their losses are too high for scaling.

Lev: I'm still digging into the numbers they give on the voltage length product, that two point eight V·m they quote is a key figure to compare against other modulator platforms we're developing <ref:2603.02584#pg1>.

The paper's improvements: Kai: The authors spend some time optimizing their design parameters to get better results, and they show that by leveraging strain-induced optical path length modulation through selective release of sections in the spiral phase shifters, they can reduce that voltage length product by a factor of five to ten times compared to current devices.

Mira: That reduction is significant because it means the voltage loss product could potentially drop down to around four V per decibel or even lower, which would drastically improve the overall efficiency of their quantum operations.

Lev: If you can reduce that metric by that much, it directly impacts the required power budget for driving those actuators and modulators in a larger system. It makes running the hardware much more feasible on existing cryogenic setups.

Kai: And they determine an optimal geometry for minimum voltage length product with silicon nitride piezo-optic coefficients of p11 equals negative zero point one two five and p12 equals zero point zero four seven, converging on a final voltage length product of two point three V·m with a core width of one micrometer.

Mira: That convergence helps you understand which material effects are dominant; they find that silicon dioxide dominates the strain-induced change, while silicon nitride contributes an opposing effect. It’s a nuanced piece of material science happening right at the heart of the device.

Lev: I like that they mapped out exactly what causes the excess loss; they identified scattering loss at the cladding–metal interface as the main culprit, and calculated that this is in the order of ten to the minus twenty-second decibels per meter, which is basically negligible across all roughness parameters considered.

Conclusion: Kai: So, to wrap up this paper on "Ultra-low loss piezo-optomechanical low-confinement silicon nitride platform for visible wavelength quantum photonic circuits," we see a system that offers ultra-low propagation loss of two point six dB per meter and good modulation bandwidth.

Mira: And the main thing is the improvement in performance potential when you optimize the geometry, getting that voltage length product down to around two point three V·m and achieving those gains in quantum state generation efficiency.

Lev: For me, it means we have a concrete target for what a functional component based on this architecture could actually look like when we factor in real-world error correction overhead and power consumption.

Kai: And for the next steps, it points toward using this low-loss, scalable architecture as the essential backbone for building quantum routers and universal quantum photonic logic circuits.

Mira: It’s a path to seamless integration of single-photon sources, modulators, and electronic control on a single chip because of that anneal-free fabrication process.

Lev: I just want to say that this platform gives us the hardware foundation we need to start designing the actual systems for quantum networking, assuming these material properties hold up under longer operational periods.

More episodes

← Home