On the wake and flapping dynamics of different aspect ratio flags
summary
The gist
The paper presents systematic time and space-resolved measurements of flag deformation and drag for various aspect ratios and mass ratios to provide a better understanding of the interaction between…
In short
The study systematically measured flag deformation and drag across different aspect ratios and mass ratios in post-critical flapping flow. It established relationships between flag dynamics, wake characteristics, and mean force, showing how these factors influence the flag's behavior at high velocities.
Key concepts
- Reduced Velocity (U*)
- This dimensionless parameter compares the characteristic period of free vibrations of a beam in a vacuum to the actual time it takes for the surrounding fluid flow to move. It helps define when the flag enters a specific post-critical flapping regime where dynamics change significantly.
- Mass Ratio (M*)
- The mass ratio compares how much fluid mass is displaced during one flapping cycle relative to the flag's actual mass. This ratio is crucial because it dictates how the fluid interaction and resulting drag are affected by the flag's inertia.
- Post-Critical Flapping Regime
- This regime occurs when flow velocities exceed a critical threshold. In this state, key dynamic parameters like tip amplitude suddenly increase, and the dimensionless tip frequency becomes relatively constant despite changes in reduced velocity.
- Mean Drag Coefficient (C̄x)
- The mean drag coefficient is measured across various flags and shows a wide range of values (from 0 to 0.55). The study found an empirical model linking this coefficient to the tip velocity, suggesting that the flag's drag is strongly influenced by its flapping motion.
Terminology used across episodes
This episode discusses
The paper
On the wake and flapping dynamics of different aspect ratio flags · Read on arXiv
Gaetan Raynaud, Karen Mulleners
Institute of Mechanical Engineering, Ecole Polytechnique Fédérale de Lausanne
The flapping of flags is a classical problem involving fast, large amplitude deformations of a thin flexible plate and unsteady flow phenomena. We perform systematic time- and space-resolved measurements of the deformation and drag acting on flapping flags for various aspect ratios and mass ratios. Flag deformations travel from the root to the tip while growing in amplitude. We present a robust method to determine the travelling wave properties, and reveal that the dimensionless wavelength λ/L is constant for a given flutter mode, and that the wave speed equals the freestream velocity for aspect ratios above unity but decreases with decreasing mass and aspect ratio. We provide a mechanistic explanation of the influence of mass and aspect ratio on the flapping dynamics by introducing a mass-ratio-corrected dimensionless wave speed, which is proportional to the square root of the dynamic pressure difference across the flag. At smaller aspect ratio, the local dynamic pressure exerted by the fluid on the flag is reduced, leading to a decrease in the wave propagation speed and the tip frequency. Based on near wake flow field measurements, we identified two characteristic length scales, the ratio of flag area over its perimeter L* and the square root of area sqrt HL that scale the circulation of vortices shed per cycle. Values of the mean drag coefficient scatter widely, from to, when varying mass and aspect ratio. We can collapse the data when using a kinematics-based model with the mass ratio and the tip speed as inputs.
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: We're looking at the paper: "On the wake and flapping dynamics of different aspect ratio flags".
Mira: Here's the gist of the paper. The paper presents systematic time and space-resolved measurements of flag deformation and drag for various aspect ratios and mass ratios to provide a better understanding of the interaction between flag deformation, wake parameters, and mean force Flag Dynamics Parameters The study defines several dimensionless parameters relevant to the flapping dynamics, including the reduced velocity U∗ = U∞ L/√εD, the mass ratio M∗ = ρfL/ρse, Hl, and Re = U∞ L/ν The reduced velocity compares the characteristic period of free vibrations of a beam in vacuum to the convective time of the surrounding flow The mass ratio compares the magnitude of the fluid mass displaced during a flapping cycle to the mass of the flag itself The aspect ratio H/L compares the height to the length of a flag, and flags in this limit behave like ribbons The Reynolds number indicates the relative importance of inertial versus viscous effects in the flow, and its influence is expected to be negligible for Re > 1000 Post-Critical Flapping Regime The research focuses on the post-critical flapping regime, which corresponds to flow velocities beyond the critical velocity In this regime, the dimensionless tip amplitude A/L suddenly increases from almost 0 to 0.27 when increasing the reduced flow velocity beyond the critical onset velocity U∗ onset = 16.4 The dimensionless tip frequency is approximately constant f L/U∞ = 0.53 ± 0.01 when varying the reduced velocity U∗ The experimental extracted offset velocities for all tested flags lie between 12.78 and 17.17 for different mass ratios and aspect ratios Spatial Characteristics of Deformation Waves The spatial characteristics of the flapping deformation waves are investigated by examining the envelope of the motion in Cartesian coordinates (x, y) and its evolution along the curvilinear coordinate s Local amplitude increases monotonically along the curvilinear coordinate for all tested aspect ratios The two necks are highlighted as regions of locally smaller lateral extent, with their positions determined by the spatial evolution of the local amplitude along the centreline The dimensionless wavelength is approximately constant for the full dataset when normalised by the length of the flag λ/L = 1.87 ± 0.08 Link between Mean Drag Coefficient and Flapping Dynamics The mean drag coefficient C¯x undergoes a transition from 0 to a plateau at post-critical velocities The mean drag coefficient of different flags can vary by two orders of magnitude, ranging from C¯x = 0 to 0.55 with no clear relationship with the reduced velocity U∗ An empirical model based on the amplitude-based Strouhal number suggests that the mean drag coefficient can be rewritten as C¯x = (π/2) × St2A / M∗ The paper provides a better connection between the deformation, flow, and force characteristics of flapping flags of different aspect ratio in the post-critical regime The typical length scale to predict the reduction in released circulation during half a stroke should include the height to account for three-dimensional effects By revisiting the model proposed by Thoma (1939), it is shown that the characteristic velocity scale is the tip velocity The relationship between tip frequency and wave speed can be rewritten as c/U∞ = λ/L × f L/U∞ This paper provides a better connection between the deformation, flow, and force characteristics of flapping flags of different aspect ratio in the post-critical regime.
Kai: References Alben, Silas 2022 Dynamics of flags over wide ranges of mass and bending stiffness.
Mira: Physical Review Fluids 7 (1), 013903, publisher: American Physical Society Argentina, Med´ eric & Mahadevan, L.
Kai: ´ 2005 Fluid-flow-induced flutter of a flag.
Title and authors: Kai: We started with the title "On the wake and flapping dynamics of different aspect ratio flags," which immediately tells you the focus is on how shape changes dictate the flow behavior when a flag flaps in a fluid.
Mira: The authors are Gaetan Raynaud and Karen Mulleners, who are linking time resolved measurements to understanding flag deformation and drag across different shapes.
Lev: From an engineering perspective, I'm curious if their approach is purely experimental, or if they also have strong theoretical models guiding the interpretation of these measurements.
Kai: They perform systematic time and space resolved measurements on various aspect ratios and mass ratios, which suggests a very comprehensive experimental setup was involved.
Mira: The implication is that they are establishing a baseline for how shape variations influence the wake structure in this flapping problem.
Lev: Establishing that baseline is important because if we can't predict the behavior of a new flag shape based on these measurements, then we can't design it effectively.
The paper's summary: Kai: So to summarize what the paper actually found, they are mapping out how different aspect ratios and mass ratios lead to specific outcomes in deformation waves and drag coefficients.
Mira: They’re showing that for instance, the dimensionless tip amplitude increases sharply when you cross that critical velocity of sixteen point four.
Lev: That sharp transition is where the non-linear behavior kicks in, which is usually the hardest part to model accurately in fluid dynamics.
Kai: They also found that while one parameter stays relatively stable, another one changes predictably with the reduced velocity U star.
Mira: Specifically, the dimensionless tip frequency remains about point five three plus or minus zero point zero one as they vary U star.
Lev: That stability in frequency suggests a robust flapping mechanism even when you are pushing the flow velocity into that high-velocity regime.
The paper's improvements: Kai: The paper suggests a few ways to improve its understanding, starting with the spatial characteristics of the deformation waves.
Mira: They propose using a robust method to quantify and characterize those spatiotemporal properties of the flag deformation waves by examining how they move in space and time.
Lev: That sounds like they are trying to create a better way to track wave propagation that accounts for turbulence, which is usually where simulations struggle the most.
Kai: They also suggest looking at the two characteristic length scales, the ratio of flag area over its perimeter L star and the square root of area times L over H, as these scale circulation shed during a cycle.
Mira: These two specific ratios are proposed as key parameters because they scale how much circulation is shed during a cycle for different aspect ratios.
Lev: If those two geometric scales are truly universal, then we can use them to predict the circulation for any shape without needing to run a separate simulation for every single geometry.
Conclusion: Kai: So wrapping up the paper on "On the wake and flapping dynamics of different aspect ratio flags," they show that this work connects deformation, flow, and force characteristics in the post-critical regime.
Mira: The main implication is that we have a better way to connect these physical phenomena using these derived scaling laws for circulation and drag based on geometry.
Lev: It moves us from just measuring raw data to having predictive tools that rely on physical relationships rather than just brute force fitting of the data points.
Kai: They show how the dimensionless wave speed scales with the square root of mass ratio times the square root of dynamic pressure.
Mira: And they also emphasize that for predicting circulation reduction during a half stroke, you need to include height because you need those three dimensional effects accounted for in those calculations.
Lev: So, to summarize, this paper gives us concrete scaling relationships to use for predicting flow and force characteristics based on flag geometry.
Kai: It’s about using the full picture of the flag's deformation and wake to get a clearer view of what's happening physically.
Mira: This is a valuable piece of work because it sets up a solid foundation for future studies on complex flapping systems.
More episodes
- 2611.14082-Two atoms with strong light-induced dipolar interactions
- 2611.14040-Characterization of BNLs 20 and 30 micrometer thick LGADs for the Electron Ion Collider
- 2611.13399-Lift-element-based dynamic network of vortex gust-airfoil interactions
- 2611.13476-Hopfion Superlattices in 3D Twisted Moir'e Light Fields
- 2611.13642-Investigation of the timing performance of double-sided p-type 3D silicon sensors produced by CNM
- 2611.13830-SiPM optical readout of a PICOSEC Micromegas precise timing detector
- 2611.14152-Where are the shortest-path nodes in spatial networks?
- 2611.14219-Sub-Ice: semi-automated mapping of basal channels from ice shelf surface elevation data
- 2611.16341-SUMNO: Spatially Unrolled Multigrid Neural Operator for Fluid Flow Surrogates
- 2611.16090-Multi-UTE Myelin Fraction Mapping: Repeatability and Cross-Field-Strength Reproducibility at 1.5T and 3T