Nanoparticle-assisted STED nanoscopy with gold nanospheres

summary

The gist

We demonstrate stimulated emission depletion (STED) microscopy with 20 nm gold nanospheres coated by fluorescent silica Compared with previous demonstrations of STED with a hybrid plasmonic…

In short

Researchers created nanoparticle-assisted STED microscopy using 20 nm gold nanospheres coated with fluorescent silica to achieve sub-diffraction resolution up to 100 nm. This method significantly improves resolution over confocal microscopy and reduces photobleaching by a factor of three compared to standard dye-based STED, making it suitable for bioimaging in aqueous environments.

Key concepts

STED Microscopy
Stimulated Emission Depletion (STED) is a super-resolution microscopy technique that achieves resolution beyond the diffraction limit of conventional microscopes. It works by using a depletion laser beam to selectively turn off fluorescence in the periphery of a focal spot, effectively shrinking the point of excitation and allowing for finer spatial detail.
Hybrid Plasmonic-Fluorescent Labels
These labels consist of 20 nm gold spheres coated with a silica shell doped with an STED dye. The gold core provides near-field enhancement, which concentrates the light around it. This combination allows for high resolution while maintaining the necessary fluorescence properties for imaging.
Near-Field Enhancement
This refers to the localized increase in electromagnetic field intensity that occurs when light interacts with nanoscale structures like gold spheres. In this case, the gold core enhances the local optical field, which is crucial for achieving STED performance and improving resolution beyond what is possible with standard dyes alone.

Terminology used across episodes

This episode discusses

The paper

Nanoparticle-assisted STED nanoscopy with gold nanospheres · Read on arXiv

Nicolai T. Urban, Matthew R. Foreman, Stefan W. Hell, Yonatan Sivan

Max Planck Institute for Biophysical Chemistry · Blackett Laboratory Department of Physics Imperial College London Unit of Electro-optics Engineering Faculty of Engineering Sciences Ben-Gurion University of the Negev

DOI: 10.1021/acsphotonics.7b00833

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "Nanoparticle-assisted STED nanoscopy with gold nanospheres".

Mira: Here's the gist of the paper. We demonstrate stimulated emission depletion (STED) microscopy with 20 nm gold nanospheres coated by fluorescent silica Compared with previous demonstrations of STED with a hybrid plasmonic fluorescent label, the current implementation offers a substantially smaller label and a better resolution improvement of up to 2.5-fold beyond the diffraction limit of confocal microscopy This is achieved at approximately 2 times lower intensity than conventional STED based on dyes alone, and in an aqueous environment, demonstrating the relevance to bio-imaging Finally, we also show, for the first time in this context, a 3-fold reduction in the rate of photobleaching compared to standard dye-based STED, thus, enabling brighter images.

Kai: Pruning redundant reasoning tokens The paper presents a novel method called nanoparticle-assisted STED nanoscopy using 20 nm gold nanospheres coated with fluorescent silica.

Mira: This approach significantly improves upon earlier demonstrations by achieving a resolution improvement of up to 2.5-fold beyond the diffraction limit of confocal microscopy.

Kai: The authors also report a substantial reduction in the rate of photobleaching, which allows for brighter images compared to standard dye-based STED.

Paper summary: Kai: To recap, this paper shows that by using twenty nm gold nanospheres coated with fluorescent silica, they achieve a resolution improvement up to two point five times beyond the diffraction limit of confocal microscopy <ref:1611.00045#pg1,beyond the diffraction limit of confocal microscopy>.

Mira: The authors are comparing this method to previous demonstrations of STED using hybrid plasmonic fluorescent labels and they claim their implementation uses a substantially smaller label and achieves this better resolution.

Lev: The core idea is that the gold core design leads to lower average near-field enhancement levels because of how the field decays as you move away from that shell, which is different from thinner metal shells.

Kai: They found this was achieved by detuning the STED wavelength, choosing five ninety five nanometers for their Atto four hundred eighty-eight dye, which resulted in an average near-field enhancement of about one point one eight.

Mira: They also measured a fluorescence decay time of one point nine nanoseconds within the nanoparticles under excitation at four hundred eighty eight nanometers, which matched their theoretical calculations for lifetime shortening to be at one point nine five nanoseconds.

Lev: That lifetime measurement confirms the physics behind how fast the dye decays inside the particles, which is necessary input for any real hardware simulation.

Kai: When they look at saturation powers, they found that for the nanoparticles, those required intensities are around four point six to five point eight megawatts per square centimeter compared to eight point one to ten megawatts per square centimeter for their control sample.

Mira: That means their estimated saturation intensities are about thirty percent better than the theoretical prediction based on a reduction of one over one point one eight.

Lev: The main caveat they mention is that the major obstacle to achieving even better performance right now is nanoparticle miniaturization and decreasing the metal volume.

Kai: They expect particles two to three times smaller than those used in current studies should still give comparable imaging performance. They also suggest optimal matching of the STED wavelength to the local plasmon resonance band could reduce required input intensity further.

Mira: Finally, they argue that replacing the thick dye-doped silica shell with fluorophores linked at a specific distance from the metal surface could lead to up to three times higher field enhancement, which is another potential path for improvement.

Conclusion: Kai: So this paper on "Nanoparticle-assisted STED nanoscopy with gold nanospheres" demonstrated that this hybrid label approach gives a resolution improvement of about two point five times beyond the diffraction limit and a three times reduction in photobleaching rate.

Mira: The authors are pointing out that the most important advance is performing imaging in water instead of index matching oil, opening up possibilities for studying biological samples like fixed cells.

Lev: In simple terms, they used tiny gold spheres to boost the signal so it works better and brighter in a real-world setting.

Kai: The whole point is that this setup allows for better resolution at lower input intensity than standard dye-based STED while also reducing bleaching.

Mira: It’s about taking the existing NP-STED concepts and making them more practical for actual bio-imaging applications by using a material that works in water.

More episodes

← Home