Inertial effects on the interphase drag force and rheology of dilute suspensions of buoyant droplets at low Reynolds number
summary
The gist
The work investigates the hydrodynamic force and first and second moments of force acting on a translating spherical droplet immersed in a uniform flow…
In short
This research investigates how inertial forces affect the hydrodynamic force and moments acting on a translating spherical droplet in a fluid flow at low Reynolds numbers. The study derives explicit expressions for these forces, showing that inertial corrections scale with velocity and volume fraction. It also examines how these moments influence two-phase flow behavior in pipe configurations, revealing non-Newtonian characteristics.
Key concepts
- Reciprocal Theorem
- A mathematical tool used to relate the force exerted by a droplet on the fluid to the force exerted by the fluid on the droplet. It is employed here within low Reynolds number regimes to analyze hydrodynamic interactions and calculate force moments.
- Inertial Corrections
- These are small, higher-order effects arising from inertia that become significant at low Reynolds numbers. The study quantifies their scaling, showing they depend on the velocity of the flow and the volume fraction of droplets, providing a more accurate description of droplet motion.
- Ensemble Average
- This involves averaging force measurements over all possible velocities of the dispersed droplets. This averaging reveals additional contributions to drag and force moments that depend on how much different droplet velocities are present in the system, impacting momentum exchange.
- Singular Perturbation Approaches
- These mathematical methods are used to estimate quantities near a small droplet by using simplified, low-order flow solutions (Stokes flow). This allows researchers to analyze complex fluid dynamics near the droplet while maintaining accuracy for inertial effects.
Terminology used across episodes
This episode discusses
- Inertial effects on the interphase drag force and rheology of dilute suspensions of buoyant droplets at low Reynolds number · Paper Radio
- Note on the method of matched-asymptotic expansions for determining the force acting on a particle
The paper
Inertial effects on the interphase drag force and rheology of dilute suspensions of buoyant droplets at low Reynolds number · Read on arXiv
Nicolas Fintzi, Jean-Lou Pierson
IFP Energies Nouvelles
In this work, we compute the hydrodynamic force and the first and second moments of force acting on a translating spherical droplet immersed in a uniform flow using the reciprocal theorem. We consider the low but finite Reynolds number regime, Re = a U ρ f / μ f, and the dilute limit of small droplet volume fraction ϕ. Here, U denotes the magnitude of the relative velocity between the phases, a the droplet radius, and ρ f and μ f the density and viscosity of the continuous phase, respectively. We show that the O(Re) inertial corrections to the first and second moments of force scale as O(ρ f ϕU 2) and O(aρ fϕU 2), respectively. Equivalently, in dimensionless form, these corrections scale as O(ϕRe) and O(R a ϕRe), where R denotes the macroscopic length scale. Moreover, the ensemble average of the drag force and the higher-order force moments over the distribution of droplet velocities introduces additional contributions proportional to the velocity variance of the dispersed phase, both in the interphase momentum exchange and in the effective stress of the continuous phase. As a consequence, in dilute emulsions of buoyant droplets, the effective stress depends quadratically on the relative velocity between the phases, on the velocity variance of the dispersed phase, and on the spatial gradients of these quantities. Finally, we consider a steady-state pipe flow to examine how the force moments derived in this study affect the behaviour of the two-phase flow in this particular configuration.
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: We're looking at the paper: "Inertial effects on the interphase drag force and rheology of dilute suspensions of buoyant droplets at low Reynolds number".
Mira: Here's the gist of the paper. The work investigates the hydrodynamic force and first and second moments of force acting on a translating spherical droplet immersed in a uniform flow, employing the reciprocal theorem within a low but finite Reynolds number regime (Re = aU rho f / mu f) and the dilute limit of small droplet volume fraction (phi).
Kai: The analysis accounts for O(Re) inertial corrections to the first and second moments of force, which scale as O(rho f phi U 2) and O(a rho f phi U 2), respectively.
Mira: These corrections are equivalent to O(phi Re) and O(a/R phi Re) in dimensionless form.
Kai: Furthermore, the ensemble average of the drag force and higher-order force moments over the distribution of droplet velocities introduces additional contributions proportional to the velocity variance of the dispersed phase, affecting both interphase momentum exchange and the effective stress of the continuous phase.
Paper summary: Kai: So to recap, this paper, "Inertial effects on the interphase drag force and rheology of dilute suspensions of buoyant droplets at low Reynolds number", is all about figuring out how those inertial forces behave when you have a tiny spherical droplet moving in a uniform flow.
Mira: The core thesis they present is that by using the reciprocal theorem, they can compute not just the hydrodynamic force, but also the first and second moments of that force acting on the droplet.
Lev: They set up their conditions in a low but finite Reynolds number regime, specifically Re equals 'a U rho f over mu f', and they're looking at small volume fractions for the droplet.
Kai: The key finding they highlight is that the O of Re inertial corrections to the first moment of force scale as O of rho f phi U squared, and for the second moment, it scales as O of a rho f phi U squared.
Mira: They also show these corrections can be seen in dimensionless form scaling with phi Re for the first moment and a over R over phi Re for the second moment, where R is some length scale.
Lev: This means they are quantifying how those inertial effects, which usually matter less at low Reynolds numbers, actually become important when you look at these specific scaled quantities.
Kai: Beyond just the force moments on one droplet, they also incorporate the ensemble average of the drag force and higher-order moments over the distribution of droplet velocities.
Mira: This averaging introduces extra contributions related to the velocity variance of the dispersed phase, which impacts how momentum transfers between phases and what you calculate as effective stress in that continuous phase.
Lev: So, they conclude that for dilute emulsions of buoyant droplets, the effective stress depends on the relative velocity between phases, plus the velocity variance of the dispersed phase, and also on spatial gradients.
Conclusion: Kai: So looking at this paper, "Inertial effects on the interphase drag force and rheology of dilute suspensions of buoyant droplets at low Reynolds number", it really focuses on those inertial terms that sneak in when you are dealing with small particles in a fluid flow.
Mira: The authors, Nicolas Fintzi and Jean-Lou Pierson, they are essentially using these force moments to better predict how two phases interact when buoyancy effects might be too small for simple models.
Lev: What this means for the real world is that engineers trying to design liquid-liquid extraction columns or flotation systems can't just rely on the simplest two-fluid models anymore because they need to account for these inertial corrections.
Kai: They are suggesting that when you model at a process scale, where things are meters big, you need to be careful about how relative motion between the phases is treated.
Mira: Exactly, and they're providing explicit mathematical tools—the drag force in equation four point one nine and the moments in four point two three through four point three three—that give engineers a more accurate picture of the forces involved.
Lev: For real hardware, this means that when you run these simulations or models, you can't just ignore those O of Re corrections; they land on your calculations because they are proportional to phi times Re.
Kai: It’s about moving beyond just the Stokes flow regime and acknowledging that even at low Reynolds numbers, the inertial effects on these force moments are present and need to be accounted for in your momentum equations.
More episodes
- 2611.14082-Two atoms with strong light-induced dipolar interactions
- 2611.14040-Characterization of BNLs 20 and 30 micrometer thick LGADs for the Electron Ion Collider
- 2611.13399-Lift-element-based dynamic network of vortex gust-airfoil interactions
- 2611.13476-Hopfion Superlattices in 3D Twisted Moir'e Light Fields
- 2611.13642-Investigation of the timing performance of double-sided p-type 3D silicon sensors produced by CNM
- 2611.13830-SiPM optical readout of a PICOSEC Micromegas precise timing detector
- 2611.14152-Where are the shortest-path nodes in spatial networks?
- 2611.14219-Sub-Ice: semi-automated mapping of basal channels from ice shelf surface elevation data
- 2611.16341-SUMNO: Spatially Unrolled Multigrid Neural Operator for Fluid Flow Surrogates
- 2611.16090-Multi-UTE Myelin Fraction Mapping: Repeatability and Cross-Field-Strength Reproducibility at 1.5T and 3T