Comparing the dynamics of idealized squall lines between NWP and LES models

summary

The gist

Both Numerical Weather Prediction (NWP) models and Large-Eddy Simulation (LES) models are used to simulate convective systems, such as squall lines…

In short

The study compared two models, NWP (ICON) and LES (MicroHH), simulating an idealized squall line. Both models showed qualitative agreement on structure but differed in quantitative results due to differences in physics and numerics. The findings emphasize the importance of both accurate model physics and numerical methods for reliable weather forecasting.

Key concepts

NWP Models (ICON)
Numerical Weather Prediction models aim for the most accurate weather forecasts. ICON uses compressible equations on a triangular grid, which is good for large scales but requires small time steps due to acoustic waves.
LES Models (MicroHH)
Large-Eddy Simulation models are used to understand physical processes. MicroHH solves anelastic equations on a regular grid and uses approximations to filter out acoustic waves, allowing for larger time steps compared to NWP models.
Numerical Diffusion
This refers to how numerical methods smooth out small-scale features in a simulation. The study found that the advection scheme's numerical diffusion significantly controls updraft dynamics, causing measurable changes in mass flux between the models.
Microphysics Schemes
Microphysics describes how water changes phase (e.g., liquid to ice). Differences in these schemes, such as warm versus ice microphysics, caused quantitative variations in cloud structure and precipitation patterns between the two models.

Terminology used across episodes

This episode discusses

The paper

Comparing the dynamics of idealized squall lines between NWP and LES models · Read on arXiv

Mirjam Tijhuis, Axel Seifert, Alberto de Lozar, Bart J. H. van Stratum, Chiel C. van Heerwaarden

Wageningen University & Research · Deutscher Wetterdienst

Mesoscale convective systems, such as squall lines, produce large amounts of rainfall but remain challenging to forecast. We intercompare two atmospheric models, namely ICON (ICOsahedral Non-hydrostatic) and MicroHH, to investigate how a simulated squall line depends on the model formulation. ICON is a Numerical Weather Prediction (NWP) model, which traditionally aims for accurate weather forecasts, whereas MicroHH is typically used to study physical processes with Large-Eddy Simulations (LES). These different purposes resulted in different designs, mainly because ICON solves the compressible equations on a triangular grid, while MicroHH solves the anelastic equations on a regular grid. With increasing computer power, the applications of these models converge, raising the question of whether the model results also converge. We investigated an idealized squall line with the same case setup in both models, including grid spacing, domain size, boundary conditions, and microphysics scheme. The models simulate the same squall-line structure and circulation pattern. Furthermore, the mean vertical wind and upward mass and humidity fluxes differ less than 5% averaged over the cloud layer at 500 m grid spacing. In contrast, ICON produces less surface precipitation than MicroHH and has higher maximum vertical velocities across grid spacings. At 500 m grid spacing, inter model differences are controlled by the advection scheme and the formulation of moist thermodynamics while differences in the turbulent formulation are less relevant. The quantitative differences between the models across grid spacings highlight that the details of model physics and numerics are at least as important as the grid spacing.

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "Comparing the dynamics of idealized squall lines between NWP and LES models".

Mira: Here's the gist of the paper. Both Numerical Weather Prediction (NWP) models and Large-Eddy Simulation (LES) models are used to simulate convective systems, such as squall lines, but with different purposes NWP models aim for the most accurate weather forecasts, whereas LES models are typically used to advance our understanding of physical processes.

Kai: With increasing computer power, the domain sizes and resolutions of these models converge, which raises the question if the model results also converge.

Mira: The study investigated an idealized squall line with the NWP model ICON (ICOsahedral Non-hydrostatic) and the LES model MicroHH.

Kai: However, there are quantitative differences with MicroHH having a more intense squall-line circulation than ICON at all resolutions (1 km, 500 m, and 250 m), mainly because MicroHH has less numerical diffusion.

Paper summary: Kai: So, we're looking at this paper today, "Comparing the dynamics of idealized squall lines between NWP and LES models." This study compares two different ways to simulate a squall line: a Numerical Weather Prediction model and a Large-Eddy Simulation model. The main idea here is to see if these two different tools, one for forecasting weather and one for understanding physics, agree when simulating the same thing.

Mira: Right, so the core thesis is that even though NWP models are for making forecasts and LES models are for understanding the underlying physics, they should still be able to show similar things about a convective system like a squall line if they're both set up correctly. The authors investigate what happens when you use ICON for NWP and MicroHH for LES.

Lev: From an engineering standpoint, it’s interesting because these models have fundamentally different designs. ICON uses compressible equations on a triangular grid, while MicroHH uses anelastic equations on a regular grid, which means they handle the physics in really different ways.

Kai: Exactly. So the paper sets up this idealized squall line comparison between ICON and MicroHH. They align the setup for things like resolution, domain size of two thousand five hundred ninety-two kilometers across the line direction, boundary conditions, and even microphysics schemes like warm and ice processes to make sure they are comparing apples to apples.

Mira: That's a key part of the methodology they used. They aimed for a good alignment between these different setups in both models so they could isolate what causes the differences in their outputs later on.

Lev: And when you look at the results, the paper points out that MicroHH has a more intense squall-line circulation than ICON across all resolutions—at one kilometer, five hundred meters, and two hundred fifty meters—and this difference is mainly because MicroHH has less numerical diffusion.

Kai: Less numerical diffusion is huge. That suggests that the way the model handles small-scale turbulence in MicroHH allows it to capture more of that intense circulation compared to ICON. That’s a direct link between the physics and the numerics they are using there, which is something we always worry about with computer power convergence.

Mira: It really highlights how much model physics matters when you're looking at these quantitative differences across different resolutions. Even though they see a good qualitative agreement in the structure and circulation patterns, those quantitative gaps show where the models aren't quite matching up perfectly yet.

Lev: That quantitative gap is where we need to focus on improving the advection scheme or the diffusion formulation, because sensitivity tests showed that different formulations of turbulent diffusion cause a two to eight percent change in mass flux.

Kai: So the authors found that varying the advection scheme can actually alter the mass flux by sixteen percent. That tells us that how they move things around—the advection—is really controlling how strong the updraft looks in these simulations.

Mira: It seems like when you look at warm microphysics, both models agree qualitatively on the squall-line structure, but they differ quantitatively in things like the strength of the updraft and the horizontal extent of the cloud.

Lev: In fact, for those runs with only condensation—meaning no rain processes—the mean vertical velocity and mass flux are higher in MicroHH compared to ICON. But they also noted that these differences between models get larger when you include condensation only than when you look at runs with warm microphysics.

Kai: That suggests that the rain processes, or the cooling from precipitation, play a role in dampening those differences we saw earlier, which points toward evaporation cooling being important for dynamics.

Mira: When they included ice microphysics, the qualitative agreement between MicroHH and ICON still held up regarding the squall-line structure itself. But then things got different in terms of how hydrometeors spread out.

Lev: Specifically, MicroHH resulted in a wider trailing stratiform region of moderate radar reflectivity, while ICON produced a higher maximum radar reflectivity and more precipitation right at the surface. That's a very concrete difference in the output you get from each model.

Kai: So to sum up this paper on "Comparing the dynamics of idealized squall lines between NWP and LES models," it shows that both NWP and LES can simulate the same system structure, but there are measurable quantitative differences, especially in rainfall amounts. The authors found these differences stem from things like advection, diffusion, and resolution settings.

Mira: It really emphasizes the importance of investing in developing the physics alongside improving the numerics because they demonstrated that good qualitative agreement between these two modeling approaches is possible under certain conditions.

Lev: What this means for us in terms of real hardware is that we need to be very careful about how we implement turbulent diffusion and advection schemes when we push towards higher resolutions, because those numerical choices have a measurable impact on the updraft dynamics.

Kai: So, looking ahead at what this study suggests, it points toward focusing our efforts on refining the physics and making sure the numerics are robust enough to handle those physical differences across different simulation setups.

Mira: It suggests that even as computer power increases and domain sizes get larger, we still have these specific physical and numerical hurdles to overcome when trying to perfectly replicate complex convective systems with either NWP or LES.

Conclusion: Kai: So, we've been looking at how ICON, an NWP model, compares to MicroHH, which is a Large-Eddy Simulation model, when they both try to simulate this squall line.

Mira: And the authors of this paper are Redelsperger and their team. They focused on comparing the dynamics of these two different modeling approaches across different resolutions like one kilometer, five hundred meters, and two hundred fifty meters.

Lev: The main thing they did was align the setup—the grid size, the boundary conditions, and even how they handled things like ice microphysics—so you could really isolate what caused the differences in their outputs.

Kai: And what they found is that while both models agree on the general shape of the squall line structure, there are still quantitative differences.

Mira: That's right. They saw things like a difference in updraft strength and how far out the cloud spreads when comparing warm microphysics runs between ICON and MicroHH.

Lev: The paper points out that these differences come down to things like turbulent diffusion and the advection scheme, with the numerical diffusion in those schemes having a real impact on how the updraft looks.

Kai: So what does this title 'Comparing the dynamics of idealized squall lines between NWP and LES models' actually mean for us?

Mira: It means that even when you’re running two fundamentally different types of models, one for forecasting weather and one for studying physics, if you get the setup right, they can actually show similar things about how these intense convective systems behave.

Lev: But those differences aren't just academic. The paper suggests that investing in both better physics schemes and better numerical methods is crucial because those are what cause those quantitative gaps we saw.

Kai: So, if the models agree qualitatively, but differ quantitatively on things like rainfall amount or circulation intensity across different resolutions, what does that tell us about the limitations of each approach?

Mira: It tells us that the assumptions underpinning each model—whether it's the anelastic equations in MicroHH or the compressible equations in ICON—are causing those discrepancies when you zoom in on smaller scales.

Lev: And from where I’m sitting, it suggests that for real hardware, we can’t just rely on one approach; you have to account for these numerical choices because they control the dynamics of things like mass flux.

Kai: So, the conclusion is that the good qualitative agreement between NWP and LES justifies assuming that insights from LES can be applied in NWP models, provided you understand where those quantitative differences are coming from.

Mira: Exactly. It's not a perfect match yet, but it shows that as computer power increases, we need to keep refining both the physics and the numerics to get closer to that ideal agreement.

Lev: And this leads us right into how those numerical choices, like advection schemes and diffusion formulations, can actually change results by up to sixteen percent in mass flux.

More episodes

← Home