Comparing the dynamics of idealized squall lines between NWP and LES models
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: We're looking at the paper: "Comparing the dynamics of idealized squall lines between NWP and LES models".
Mira: Here's the gist of the paper. Both Numerical Weather Prediction (NWP) models and Large-Eddy Simulation (LES) models are used to simulate convective systems, such as squall lines, but with different purposes NWP models aim for the most accurate weather forecasts, whereas LES models are typically used to advance our understanding of physical processes.
Kai: With increasing computer power, the domain sizes and resolutions of these models converge, which raises the question if the model results also converge.
Mira: The study investigated an idealized squall line with the NWP model ICON (ICOsahedral Non-hydrostatic) and the LES model MicroHH.
Kai: However, there are quantitative differences with MicroHH having a more intense squall-line circulation than ICON at all resolutions (1 km, 500 m, and 250 m), mainly because MicroHH has less numerical diffusion.
Paper summary: Kai: So, we're looking at this paper today, "Comparing the dynamics of idealized squall lines between NWP and LES models." This study compares two different ways to simulate a squall line: a Numerical Weather Prediction model and a Large-Eddy Simulation model. The main idea here is to see if these two different tools, one for forecasting weather and one for understanding physics, agree when simulating the same thing.
Mira: Right, so the core thesis is that even though NWP models are for making forecasts and LES models are for understanding the underlying physics, they should still be able to show similar things about a convective system like a squall line if they're both set up correctly. The authors investigate what happens when you use ICON for NWP and MicroHH for LES.
Lev: From an engineering standpoint, it’s interesting because these models have fundamentally different designs. ICON uses compressible equations on a triangular grid, while MicroHH uses anelastic equations on a regular grid, which means they handle the physics in really different ways.
Kai: Exactly. So the paper sets up this idealized squall line comparison between ICON and MicroHH. They align the setup for things like resolution, domain size of two thousand five hundred ninety-two kilometers across the line direction, boundary conditions, and even microphysics schemes like warm and ice processes to make sure they are comparing apples to apples.
Mira: That's a key part of the methodology they used. They aimed for a good alignment between these different setups in both models so they could isolate what causes the differences in their outputs later on.
Lev: And when you look at the results, the paper points out that MicroHH has a more intense squall-line circulation than ICON across all resolutions—at one kilometer, five hundred meters, and two hundred fifty meters—and this difference is mainly because MicroHH has less numerical diffusion.
Kai: Less numerical diffusion is huge. That suggests that the way the model handles small-scale turbulence in MicroHH allows it to capture more of that intense circulation compared to ICON. That’s a direct link between the physics and the numerics they are using there, which is something we always worry about with computer power convergence.
Mira: It really highlights how much model physics matters when you're looking at these quantitative differences across different resolutions. Even though they see a good qualitative agreement in the structure and circulation patterns, those quantitative gaps show where the models aren't quite matching up perfectly yet.
Lev: That quantitative gap is where we need to focus on improving the advection scheme or the diffusion formulation, because sensitivity tests showed that different formulations of turbulent diffusion cause a two to eight percent change in mass flux.
Kai: So the authors found that varying the advection scheme can actually alter the mass flux by sixteen percent. That tells us that how they move things around—the advection—is really controlling how strong the updraft looks in these simulations.
Mira: It seems like when you look at warm microphysics, both models agree qualitatively on the squall-line structure, but they differ quantitatively in things like the strength of the updraft and the horizontal extent of the cloud.
Lev: In fact, for those runs with only condensation—meaning no rain processes—the mean vertical velocity and mass flux are higher in MicroHH compared to ICON. But they also noted that these differences between models get larger when you include condensation only than when you look at runs with warm microphysics.
Kai: That suggests that the rain processes, or the cooling from precipitation, play a role in dampening those differences we saw earlier, which points toward evaporation cooling being important for dynamics.
Mira: When they included ice microphysics, the qualitative agreement between MicroHH and ICON still held up regarding the squall-line structure itself. But then things got different in terms of how hydrometeors spread out.
Lev: Specifically, MicroHH resulted in a wider trailing stratiform region of moderate radar reflectivity, while ICON produced a higher maximum radar reflectivity and more precipitation right at the surface. That's a very concrete difference in the output you get from each model.
Kai: So to sum up this paper on "Comparing the dynamics of idealized squall lines between NWP and LES models," it shows that both NWP and LES can simulate the same system structure, but there are measurable quantitative differences, especially in rainfall amounts. The authors found these differences stem from things like advection, diffusion, and resolution settings.
Mira: It really emphasizes the importance of investing in developing the physics alongside improving the numerics because they demonstrated that good qualitative agreement between these two modeling approaches is possible under certain conditions.
Lev: What this means for us in terms of real hardware is that we need to be very careful about how we implement turbulent diffusion and advection schemes when we push towards higher resolutions, because those numerical choices have a measurable impact on the updraft dynamics.
Kai: So, looking ahead at what this study suggests, it points toward focusing our efforts on refining the physics and making sure the numerics are robust enough to handle those physical differences across different simulation setups.
Mira: It suggests that even as computer power increases and domain sizes get larger, we still have these specific physical and numerical hurdles to overcome when trying to perfectly replicate complex convective systems with either NWP or LES.
Conclusion: Kai: So, we've been looking at how ICON, an NWP model, compares to MicroHH, which is a Large-Eddy Simulation model, when they both try to simulate this squall line.
Mira: And the authors of this paper are Redelsperger and their team. They focused on comparing the dynamics of these two different modeling approaches across different resolutions like one kilometer, five hundred meters, and two hundred fifty meters.
Lev: The main thing they did was align the setup—the grid size, the boundary conditions, and even how they handled things like ice microphysics—so you could really isolate what caused the differences in their outputs.
Kai: And what they found is that while both models agree on the general shape of the squall line structure, there are still quantitative differences.
Mira: That's right. They saw things like a difference in updraft strength and how far out the cloud spreads when comparing warm microphysics runs between ICON and MicroHH.
Lev: The paper points out that these differences come down to things like turbulent diffusion and the advection scheme, with the numerical diffusion in those schemes having a real impact on how the updraft looks.
Kai: So what does this title 'Comparing the dynamics of idealized squall lines between NWP and LES models' actually mean for us?
Mira: It means that even when you’re running two fundamentally different types of models, one for forecasting weather and one for studying physics, if you get the setup right, they can actually show similar things about how these intense convective systems behave.
Lev: But those differences aren't just academic. The paper suggests that investing in both better physics schemes and better numerical methods is crucial because those are what cause those quantitative gaps we saw.
Kai: So, if the models agree qualitatively, but differ quantitatively on things like rainfall amount or circulation intensity across different resolutions, what does that tell us about the limitations of each approach?
Mira: It tells us that the assumptions underpinning each model—whether it's the anelastic equations in MicroHH or the compressible equations in ICON—are causing those discrepancies when you zoom in on smaller scales.
Lev: And from where I’m sitting, it suggests that for real hardware, we can’t just rely on one approach; you have to account for these numerical choices because they control the dynamics of things like mass flux.
Kai: So, the conclusion is that the good qualitative agreement between NWP and LES justifies assuming that insights from LES can be applied in NWP models, provided you understand where those quantitative differences are coming from.
Mira: Exactly. It's not a perfect match yet, but it shows that as computer power increases, we need to keep refining both the physics and the numerics to get closer to that ideal agreement.
Lev: And this leads us right into how those numerical choices, like advection schemes and diffusion formulations, can actually change results by up to sixteen percent in mass flux.
Mirjam Tijhuis, Axel Seifert, Alberto de Lozar, Bart J. H. van Stratum, Chiel C. van Heerwaarden
Wageningen University & Research · Deutscher Wetterdienst
physics.ao-ph, physics.flu-dyn
Submitted: 2025-06-24
Updated: 2026-11-04
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 76/100
The gist: Both Numerical Weather Prediction (NWP) models and Large-Eddy Simulation (LES) models are used to simulate convective systems, such as squall lines…
Key concepts
- NWP Models (ICON)
- Numerical Weather Prediction models aim for the most accurate weather forecasts. ICON uses compressible equations on a triangular grid, which is good for large scales but requires small time steps due to acoustic waves.
- LES Models (MicroHH)
- Large-Eddy Simulation models are used to understand physical processes. MicroHH solves anelastic equations on a regular grid and uses approximations to filter out acoustic waves, allowing for larger time steps compared to NWP models.
- Numerical Diffusion
- This refers to how numerical methods smooth out small-scale features in a simulation. The study found that the advection scheme's numerical diffusion significantly controls updraft dynamics, causing measurable changes in mass flux between the models.
- Microphysics Schemes
- Microphysics describes how water changes phase (e.g., liquid to ice). Differences in these schemes, such as warm versus ice microphysics, caused quantitative variations in cloud structure and precipitation patterns between the two models.
Terminology
Summary
Both Numerical Weather Prediction (NWP) models and Large-Eddy Simulation (LES) models are used to simulate convective systems, such as squall lines, but with different purposes NWP models aim for the most accurate weather forecasts, whereas LES models are typically used to advance our understanding of physical processes. p. 1 ABSTRACT: Both Numerical Weather Prediction (NWP) models and Large-Eddy Simulation
(LES) models are used to simulate convective systems, such as squall lines, but with different
purposes. NWP models aim for the most accurate weather forecasts, whereas LES models are
typically used to advance our understanding of physical processes. Therefore, these types of
models differ in their design. With increasing computer power, the domain sizes and resolutions
of these models converge, which raises the question if the model results also converge. With increasing computer power, the domain sizes and resolutions
of these models converge, which raises the question if the model results also converge. We
investigated an idealized squall line with the NWP model ICON (ICOsahedral Non-hydrostatic)
and the LES model MicroHH. The models simulate the same squall-line
structure and circulation pattern in simulations with both warm and ice microphysics. However,
there are quantitative differences with MicroHH having a more intense squall-line circulation than
ICON at all resolutions (1 km, 500 m, and 250 m), mainly because MicroHH has less numerical
diffusion. The magnitude of the differences is sensitive to the advection scheme and the resolution
and less sensitive to the formulation of turbulent diffusion. The quantitative differences between
the models across resolutions highlight the importance of model physics and numerics, whereas
the good qualitative agreement gives confidence that insights from LES can be applied in NWP.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Model Design Differences
The models differ in their design, mainly because ICON solves the compressible equations on a triangular grid, while MicroHH solves the anelastic equations on a regular grid. ICON uses compressible equations which are applicable over a large range of scales and potentially use unstructured grids to be applicable in spherical geometry Compressible equations are hyperbolic, requiring only local communication for scalability but include acoustic waves that require a short time step. p. 3 range of scales, and potentially the use of unstructured grids to be applicable in spherical geometry. Compressible equations are hyperbolic; hence, the propagation speed of disturbances is finite,
and only local communication is required, which improves scalability. In contrast, LES models are commonly designed on structured grids and use either
the anelastic or Boussinesq approximation. These approximations filter out the acoustic waves,
allowing for a relatively large timestep.Where the paper says it
Where the paper says it
Case Setup Alignment
The case setup, including resolution, domain size, boundary conditions, and microphysics scheme is aligned between the models. The models simulate the same squall-line structure and circulation pattern in simulations with both warm and ice microphysics. p. 1 The case setup, including resolution, domain size, boundary conditions, and
microphysics scheme, is aligned between the models. The models simulate the same squall-line
structure and circulation pattern in simulations with both warm and ice microphysics. conditions are periodic in both horizontal directions. To reduce the impact of the periodic boundary
conditions as much as possible, we used a large domain size of 2592 km in the across-line direction. The along-line direction is 64 km, and the domain top is at 23. In the vertical, the grid is
stretched with a resolution of 50 m at the surface. For all runs, the total simulation time
is 4 hours, and the results are saved every 6 minutes. Our initial profiles are the temperature and humidity profiles of Weisman and Klemp (1982),
with a surface mixing ratio of 13 g kg-1, and the weak-shear wind profile of Weisman et al.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Warm Microphysics Results
In simulations with warm microphysics, both models agree qualitatively on the squall-line structure and circulation The models agree qualitatively with each other and with the literature on the squall-line structure. However, quantitative differences exist, such as in the strength of the updraft, horizontal extent of the cloud, and size of structures. p. 1 The models simulate the same squall-line
structure and circulation pattern in simulations with both warm and ice microphysics. However,
there are quantitative differences with MicroHH having a more intense squall-line circulation than
ICON at all resolutions (1 km, 500 m, and 250 m), mainly because MicroHH has less numerical
diffusion. In the vertical, the grid is
stretched with a resolution of 50 m at the surface. For the horizontal resolution, we start with 500
m as the size of the squares in MicroHH and as the triangle edge length in ICON, which results in
slightly smaller grid cells compared to MicroHH.Where the paper says it
Where the paper says it
Condensation Only Dynamics
Excluding rain processes reveals underlying differences in the dynamics of the cold pool, which is driven by a density current rather than typical squall-line dynamics. Without rain-induced cooling and downward transport of cold air, the system is simpler to interpret. p. 3 The cold pool is maintained by the downward transport of cold air in the downdrafts and the
evaporation of rain. The cold pool intensity and wind shear determine the exact organization and
lifetime of the system (Rotunno et al. For the horizontal resolution, we start with 500
m as the size of the squares in MicroHH and as the triangle edge length in ICON, which results in
slightly smaller grid cells compared to MicroHH. Because of this inevitable difference and to test
the sensitivity of our results to resolution in general, we performed additional runs at 1 km and 250
m resolution with both models, at 2 km in ICON, and 125 m in MicroHH.Where the paper says it
Where the paper says it
Sensitivity Analysis
Sensitivity tests showed that different formulations of turbulent diffusion cause a 2-8% change in the mass flux, whereas varying the advection scheme can alter the mass flux by 16%. p. 3 Lebo and
Morrison (2015); Varble et al. (2020) also found a decrease in the upward mass flux with increasing
4 The first two investigate the impact of the advection scheme. The advection schemes between
MicroHH and ICON mainly differ in the degree of numerical diffusion, with ICON being more
diffusive because of the triangular grid and the lower-order scheme. However,
there are quantitative differences with MicroHH having a more intense squall-line circulation than
ICON at all resolutions (1 km, 500 m, and 250 m), mainly because MicroHH has less numerical
diffusion. The magnitude of the differences is sensitive to the advection scheme and the resolution
and less sensitive to the formulation of turbulent diffusion.Where the paper says it
Where the paper says it
Where the paper says it
Resolution Impact
Figure 6 reveals the sensitivity of the squall-line characteristics to the resolution relative to the differences between the models. There is no impact of resolution on the cold pool propagation speed in either model. p. 8 (1997),
which has a maximum wind speed of 10 m s-1. We initiated the squall line by implementing a
cold pool similar to the semi-infinite cold pool of Weisman et al. LES models, on the other hand, are research models
designed to improve physical understanding by resolving the largest part of the turbulence and as
a consequence have historically been limited to idealized cases on small domains. With increases
in computer power, LES is moving towards simulations of real-life weather by increasing domain
sizes and including physical processes such as radiation and land-surface interactions.Where the paper says it
Where the paper says it
Ice Microphysics Effects
The qualitative agreement between MicroHH and ICON persists when ice microphysics is included The spreading of the hydrometeors and their development by the different microphysical processes are different. Ultimately, this results in a wider trailing stratiform region of moderate radar reflectivity in MicroHH and a higher maximum radar reflectivity and more precipitation at the surface in ICON. p. 9 In all our simulations, the cloud droplet number concentration is fixed at
200 cm-3. In addition, we calculated the radar reflectivity using the Rayleigh approximation and
assuming that all ice particles are dry, also when they are melting (Seifert and Beheng 2006a).Where the paper says it
Conclusion
The inter-model differences are caused by differences in microphysics schemes, different boundary conditions, and 2D vs 3D simulations in Redelsperger et al. (2000), and by differences in surface fluxes and water conservation in Bryan et al. p. 4 Inter-model differences are caused
by differences in microphysics schemes, different boundary conditions, and 2D vs 3D simulations
in Redelsperger et al. (2000), and by differences in surface fluxes and water conservation in Bryan
et al. The magnitude of the differences is sensitive to the advection scheme and the resolution
and less sensitive to the formulation of turbulent diffusion. The quantitative differences between
the models across resolutions highlight the importance of model physics and numerics, whereas
the good qualitative agreement gives confidence that insights from LES can be applied in NWP.Where the paper says it
Where the paper says it
Summary and Outlook
In this study, we compared the dynamics of an idealized squall line between NWP and LES using ICON and MicroHH Both models agree qualitatively on the structure and circulation of the squall line despite quantitative differences. Sensitivity tests showed that different formulations of turbulent diffusion cause a 2-8% change in the mass flux, whereas varying the advection scheme can alter the mass flux by 16%. Thus, the advection scheme, and specifically the numerical diffusion therein, has a controlling impact on the updraft dynamics. p. 7 The first two investigate the impact of the advection scheme. The advection schemes between
MicroHH and ICON mainly differ in the degree of numerical diffusion, with ICON being more
diffusive because of the triangular grid and the lower-order scheme. As many model aspects influence squall lines, assigning differences to specific processes in a
model intercomparison is challenging but can also provide valuable new insights into which model
aspects impact squall-line evolution and structure. To the best of our knowledge, two studies have
inter-compared squall lines and identified which differences are crucial (Redelsperger et al. In short, our main aim is to investigate how similar an NWP model and an LES model perform
on the same idealized squall line and thus how the design differences between NWP and LES
impact the system’s dynamics. To focus on these design differences, we align the other model
settings as closely as possible, including the boundary conditions and microphysics.Where the paper says it
Where the paper says it
Where the paper says it
Acknowledgments
The initial phase of this research was carried out during the first author’s visit to the Deutscher Wetterdienst We would like to thank Linda Schlemmer for her help in arranging this visit. The MicroHH simulations are carried out on the Dutch national e-infrastructure with the support of SURF Cooperative. p. 1 The models simulate the same squall-line
structure and circulation pattern in simulations with both warm and ice microphysics. However,
there are quantitative differences with MicroHH having a more intense squall-line circulation than
ICON at all resolutions (1 km, 500 m, and 250 m), mainly because MicroHH has less numerical
diffusion.Where the paper says it
Data Availability Statement
The ICON simulations are performed with the open source release of the model (ICON partnership (DWD and MPI-M and DKRZ and KIT and C2SM) 2024) version 2024-01 The MicroHH simulations are performed with MicroHH (van Heerwaarden et al. 2017) version 2. p. 2 2015; Heinze et al. 2017; Lean
et al. To focus on these design differences, we align the other model
settings as closely as possible, including the boundary conditions and microphysics. To this end,
we implemented the double moment microphysics scheme of Seifert and Beheng (2006b,a) in
MicroHH.Where the paper says it
Where the paper says it
References
Blahak, U., 2008: Towards a better representation of high density ice particles in a state-of-the-art two-moment bulk microphysical scheme. Proceedings of the 15th International Conference on Clouds and Precipitation, Cancun, Mexico, Vol. p. 6 For thermodynamics,
MicroHH uses liquid water potential temperature 𝜃𝑙 as the prognostic temperature variable and
total water mixing ratio 𝑞𝑡 for moist processes. These quantities are conserved in the absence of
precipitation, and they are updated with the tendencies from all the physics parameterizations at
the same time. Going
towards sub-kilometer resolution results in better resolved turbulence (e. Bryan et al. Methods
This study focuses on the difference between NWP and LES, therefore we first describe the
relevant characteristics of the models used: ICON and MicroHH. This description focuses on the
aspects that differ between the models and that are used in the squall-line simulations. However, how this influences a squall line is not trivial. Bryan and
Morrison (2012) found that their squall line intensifies when the resolution is increased from 4 km
to 1 km, but the intensity reduces when the resolution is increased further to 250 m. The second simulation is an ICON run with the turbulent length scale increased from 25 m to 500
m, as this length scale controls the diffusion coefficients above the surface (Mellor and Yamada
1982). The last simulation is an ICON run with the LES Smagorinsky-Lilly scheme for turbulence
(Dipankar et al. The confidence in the model representation of MSCs can be increased by intercomparing results
from different types of models, for example, Numerical Weather Prediction (NWP) models and
Large-Eddy Simulation (LES) models. NWP models are general-purpose models designed to
generate forecasts fast enough for operational use and cover a range of scales, from global climate
modeling to limited-area weather forecasts. Introduction
Mesoscale convective systems (MCSs), such as squall lines, account for more than 50 % of
the annual rainfall in the tropics and large parts of the subtropics and midlatitudes (Feng et al. 2021) but they are challenging to reproduce in atmospheric models (Melhauser and Zhang 2012). , the intercomparison of Fan et al. Third, simulated squall lines are influenced
by the modeled mixing (Stanford et al. The confidence in the model representation of MSCs can be increased by intercomparing results
from different types of models, for example, Numerical Weather Prediction (NWP) models and
Large-Eddy Simulation (LES) models. NWP models are general-purpose models designed to
generate forecasts fast enough for operational use and cover a range of scales, from global climate
modeling to limited-area weather forecasts. We included a run with ICON-LES to test sensitivity to
the turbulence formulation (see Section 3b), but we use the NWP mode in all other runs, as we are
interested in ICON as an NWP model. MicroHH is a fluid dynamics code designed for Large-Eddy Simulations and Direct Numerical
Simulations. SIGNIFICANCE STATEMENT: Large convective systems, such as thunderstorms, are responsible for more than half of the annual rainfall in large parts of the world, but they are a challenge
to (re)produce by atmospheric models. By comparing different models, we can determine which
aspects of convective systems are robustly modeled and which aspects are uncertain. (2010) and parameterizations for homogeneous
and heterogeneous ice nucleation based on Karcher and Lohmann (2002); K ¨ archer et al. (2006); ¨
Phillips et al. The frozen part of the scheme follows Seifert and Beheng (2006b) with the addition
of hail as described by Blahak (2008); Noppel et al. (2010) and parameterizations for homogeneous
and heterogeneous ice nucleation based on Karcher and Lohmann (2002); K ¨ archer et al. List of model characteristics
ICON MicroHH
Governing equations compressible anelastic
Prognostic variables 𝜃𝜌, 𝑞𝑣, 𝑞𝑙 𝜃𝑙
, 𝑞𝑡
Density total density including hydrometeors moist density
Condensation at constant volume at constant pressure
Grid triangular regular
Temporal discretization second-order Predictor-Corrector five-stage fourth-order Runge-Kutta
Advection second order fifth order
Turbulence 1D-TKE Smagorinsky-Lilly
momentum, thermodynamics, and tracers are second-order schemes designed for irregular grids
(see e. Miura (2007) for the tracer advection scheme). However, these sets of equations include the Poisson
equation for pressure, which is an elliptic equation. Consequently, pressure perturbations displace
instantaneously, which requires global communication (Kurowski et al. List of model characteristics
ICON MicroHH
Governing equations compressible anelastic
Prognostic variables 𝜃𝜌, 𝑞𝑣, 𝑞𝑙 𝜃𝑙
, 𝑞𝑡
Density total density including hydrometeors moist density
Condensation at constant volume at constant pressure
Grid triangular regular
Temporal discretization second-order Predictor-Corrector five-stage fourth-order Runge-Kutta
Advection second order fifth order
Turbulence 1D-TKE Smagorinsky-Lilly
momentum, thermodynamics, and tracers are second-order schemes designed for irregular grids
(see e. Miura (2007) for the tracer advection scheme). 2021) but they are challenging to reproduce in atmospheric models (Melhauser and Zhang 2012). The confidence in the model representation of MSCs can be increased by intercomparing results
from different types of models, for example, Numerical Weather Prediction (NWP) models and
Large-Eddy Simulation (LES) models. These models differ in their grid structure and governing equations, which were
aligned in the work of Bryan et al. Hence, our model intercomparison can provide new
insights into the impact of these design choices on simulated squall lines relative to other model
aspects, such as resolution. 2021) but they are challenging to reproduce in atmospheric models (Melhauser and Zhang 2012). The confidence in the model representation of MSCs can be increased by intercomparing results
from different types of models, for example, Numerical Weather Prediction (NWP) models and
Large-Eddy Simulation (LES) models. 2021) but they are challenging to reproduce in atmospheric models (Melhauser and Zhang 2012). The confidence in the model representation of MSCs can be increased by intercomparing results
from different types of models, for example, Numerical Weather Prediction (NWP) models and
Large-Eddy Simulation (LES) models. 2021) but they are challenging to reproduce in atmospheric models (Melhauser and Zhang 2012). The confidence in the model representation of MSCs can be increased by intercomparing results
from different types of models, for example, Numerical Weather Prediction (NWP) models and
Large-Eddy Simulation (LES) models. Introduction
Mesoscale convective systems (MCSs), such as squall lines, account for more than 50 % of
the annual rainfall in the tropics and large parts of the subtropics and midlatitudes (Feng et al. 2021) but they are challenging to reproduce in atmospheric models (Melhauser and Zhang 2012). The second simulation is an ICON run with the turbulent length scale increased from 25 m to 500
m, as this length scale controls the diffusion coefficients above the surface (Mellor and Yamada
1982). The last simulation is an ICON run with the LES Smagorinsky-Lilly scheme for turbulence
(Dipankar et al. List of model characteristics
ICON MicroHH
Governing equations compressible anelastic
Prognostic variables 𝜃𝜌, 𝑞𝑣, 𝑞𝑙 𝜃𝑙
, 𝑞𝑡
Density total density including hydrometeors moist density
Condensation at constant volume at constant pressure
Grid triangular regular
Temporal discretization second-order Predictor-Corrector five-stage fourth-order Runge-Kutta
Advection second order fifth order
Turbulence 1D-TKE Smagorinsky-Lilly
momentum, thermodynamics, and tracers are second-order schemes designed for irregular grids
(see e. Miura (2007) for the tracer advection scheme). ao-ph] 24 Jun 2025
Generated using the official AMS LATEX template v6. 1
Comparing the dynamics of idealized squall lines between NWP and LES
models
Mirjam Tijhuis,a Axel Seifert,b Alberto de Lozar,b Bart J. Lastly, we implemented the double-moment microphysics scheme of ICON in MicroHH to have
the same scheme in both models. This scheme, which is based on the scheme of Seifert and Beheng
(2006b), predicts the evolution of the mass and number concentrations of six types of hydrometeors:
cloud liquid water, cloud ice, rain, snow, hail, and graupel. 2020; Takemi and Rotunno 2003), where increased subgrid scale mixing leads to a reduction in rainfall, whereas a stronger numerical filter leads to an
increase in rainfall (Takemi and Rotunno 2003). Fourth, the surface formulation influences the
simulated squall lines, although this is a minor influence (Peters and Hohenegger 2017). The frozen part of the scheme follows Seifert and Beheng (2006b) with the addition
of hail as described by Blahak (2008); Noppel et al. (2010) and parameterizations for homogeneous
and heterogeneous ice nucleation based on Karcher and Lohmann (2002); K ¨ archer et al. 2021) but they are challenging to reproduce in atmospheric models (Melhauser and Zhang 2012). The confidence in the model representation of MSCs can be increased by intercomparing results
from different types of models, for example, Numerical Weather Prediction (NWP) models and
Large-Eddy Simulation (LES) models. As many model aspects influence squall lines, assigning differences to specific processes in a
model intercomparison is challenging but can also provide valuable new insights into which model
aspects impact squall-line evolution and structure. To the best of our knowledge, two studies have
inter-compared squall lines and identified which differences are crucial (Redelsperger et al. Lastly,
the aforementioned aspects can be interdependent (Bryan and Morrison 2012). As many model aspects influence squall lines, assigning differences to specific processes in a
model intercomparison is challenging but can also provide valuable new insights into which model
aspects impact squall-line evolution and structure. For all runs, the total simulation time
is 4 hours, and the results are saved every 6 minutes. Our initial profiles are the temperature and humidity profiles of Weisman and Klemp (1982),
with a surface mixing ratio of 13 g kg-1, and the weak-shear wind profile of Weisman et al. 1988; Weisman et al. Despite this well-known general
structure, forecasting squall lines is challenging (Melhauser and Zhang 2012), as the model results
are sensitive to many aspects. With increases
in computer power, LES is moving towards simulations of real-life weather by increasing domain
sizes and including physical processes such as radiation and land-surface interactions. At the
same time, NWP is moving towards LES resolutions, resolving an increasingly large part of the
turbulence (Schalkwijk et al. ABSTRACT: Both Numerical Weather Prediction (NWP) models and Large-Eddy Simulation
(LES) models are used to simulate convective systems, such as squall lines, but with different
purposes. NWP models aim for the most accurate weather forecasts, whereas LES models are
typically used to advance our understanding of physical processes. ao-ph] 24 Jun 2025
Generated using the official AMS LATEX template v6. 1
Comparing the dynamics of idealized squall lines between NWP and LES
models
Mirjam Tijhuis,a Axel Seifert,b Alberto de Lozar,b Bart J. In both models, the distribution of total
water over water vapor and liquid water is determined using saturation adjustment separately from
the microphysics routine. Therefore, the warm part of the microphysics scheme consists of the
rain processes, which are the autoconversion, accretion, and self-collection of raindrops following
Seifert and Beheng (2001) and the parameterization of the rain evaporation and sedimentation of
Seifert (2008). ao-ph] 24 Jun 2025
Generated using the official AMS LATEX template v6. 1
Comparing the dynamics of idealized squall lines between NWP and LES
models
Mirjam Tijhuis,a Axel Seifert,b Alberto de Lozar,b Bart J. In addition, we calculated the radar reflectivity using the Rayleigh approximation and
assuming that all ice particles are dry, also when they are melting (Seifert and Beheng 2006a). Although the full microphysics scheme includes both liquid and ice processes, both models
include the possibility to use only the warm part of the scheme. ABSTRACT: Both Numerical Weather Prediction (NWP) models and Large-Eddy Simulation
(LES) models are used to simulate convective systems, such as squall lines, but with different
purposes. NWP models aim for the most accurate weather forecasts, whereas LES models are
typically used to advance our understanding of physical processes. ao-ph] 24 Jun 2025
Generated using the official AMS LATEX template v6. 1
Comparing the dynamics of idealized squall lines between NWP and LES
models
Mirjam Tijhuis,a Axel Seifert,b Alberto de Lozar,b Bart J. In both models, the distribution of total
water over water vapor and liquid water is determined using saturation adjustment separately from
the microphysics routine. Therefore, the warm part of the microphysics scheme consists of the
rain processes, which are the autoconversion, accretion, and self-collection of raindrops following
Seifert and Beheng (2001) and the parameterization of the rain evaporation and sedimentation of
Seifert (2008). ao-ph] 24 Jun 2025
Generated using the official AMS LATEX template v6. 1
Comparing the dynamics of idealized squall lines between NWP and LES
models
Mirjam Tijhuis,a Axel Seifert,b Alberto de Lozar,b Bart J. Lastly, we implemented the double-moment microphysics scheme of ICON in MicroHH to have
the same scheme in both models. This scheme, which is based on the scheme of Seifert and Beheng
(2006b), predicts the evolution of the mass and number concentrations of six types of hydrometeors:
cloud liquid water, cloud ice, rain, snow, hail, and graupel. , the intercomparison of Fan et al. Third, simulated squall lines are influenced
by the modeled mixing (Stanford et al. Bryan et al. 2003;
Bryan and Morrison 2012; Varble et al. Third, simulated squall lines are influenced
by the modeled mixing (Stanford et al. 2020; Takemi and Rotunno 2003), where increased subgrid scale mixing leads to a reduction in rainfall, whereas a stronger numerical filter leads to an
increase in rainfall (Takemi and Rotunno 2003). We included a run with ICON-LES to test sensitivity to
the turbulence formulation (see Section 3b), but we use the NWP mode in all other runs, as we are
interested in ICON as an NWP model. MicroHH is a fluid dynamics code designed for Large-Eddy Simulations and Direct Numerical
Simulations. Third, simulated squall lines are influenced
by the modeled mixing (Stanford et al. 2020; Takemi and Rotunno 2003), where increased subgrid scale mixing leads to a reduction in rainfall, whereas a stronger numerical filter leads to an
increase in rainfall (Takemi and Rotunno 2003). Third, simulated squall lines are influenced
by the modeled mixing (Stanford et al. 2020; Takemi and Rotunno 2003), where increased subgrid scale mixing leads to a reduction in rainfall, whereas a stronger numerical filter leads to an
increase in rainfall (Takemi and Rotunno 2003). ao-ph] 24 Jun 2025
Generated using the official AMS LATEX template v6. 1
Comparing the dynamics of idealized squall lines between NWP and LES
models
Mirjam Tijhuis,a Axel Seifert,b Alberto de Lozar,b Bart J. ao-ph] 24 Jun 2025
Generated using the official AMS LATEX template v6. 1
Comparing the dynamics of idealized squall lines between NWP and LES
models
Mirjam Tijhuis,a Axel Seifert,b Alberto de Lozar,b Bart J.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved model comparison capability: The system can now quantitatively assess how design differences between NWP models (like ICON) and LES models (like MicroHH) impact squall line dynamics across various resolutions and microphysics schemes by analyzing quantitative differences in variables such as
cold pool speed and intensity
as detailed in Table 2. -
Improved sensitivity analysis: The system can perform targeted sensitivity tests to isolate the controlling factors of model differences, specifically determining whether
the advection scheme, and specifically the numerical diffusion therein, has a controlling impact on the updraft dynamics,
which explains whythe more diffusive model (ICON) produces a weaker mass flux.
-
Improved parameterization understanding: The system can quantify the relative importance of different physical processes by showing how including or excluding components like
ice microphysics
amplifies inter-model differences, indicating thatthe feedbacks within the microphysics and the interactions between the dynamics and microphysics, ultimately result in a difference in cold pool intensity between the models.
-
Improved resolution impact assessment: The system can distinguish between resolution effects and model differences by identifying that
the cold pool intensities, upward mass fluxes, and rainwater contents are higher in MicroHH compared to ICON at all resolutions,
while noting thatthe mean intensity increases with increasing resolution in MicroHH, whereas it decreases in ICON.
-
Improved uncertainty quantification: The system can provide a nuanced view of model agreement by showing that
the qualitative agreement between MicroHH and ICON persists when ice microphysics is included,
suggesting this agreement is robust across different model formulations.
Abstract
Mesoscale convective systems, such as squall lines, produce large amounts of rainfall but remain challenging to forecast. We intercompare two atmospheric models, namely ICON (ICOsahedral Non-hydrostatic) and MicroHH, to investigate how a simulated squall line depends on the model formulation. ICON is a Numerical Weather Prediction (NWP) model, which traditionally aims for accurate weather forecasts, whereas MicroHH is typically used to study physical processes with Large-Eddy Simulations (LES). These different purposes resulted in different designs, mainly because ICON solves the compressible equations on a triangular grid, while MicroHH solves the anelastic equations on a regular grid. With increasing computer power, the applications of these models converge, raising the question of whether the model results also converge. We investigated an idealized squall line with the same case setup in both models, including grid spacing, domain size, boundary conditions, and microphysics scheme. The models simulate the same squall-line structure and circulation pattern. Furthermore, the mean vertical wind and upward mass and humidity fluxes differ less than 5% averaged over the cloud layer at 500 m grid spacing. In contrast, ICON produces less surface precipitation than MicroHH and has higher maximum vertical velocities across grid spacings. At 500 m grid spacing, inter model differences are controlled by the advection scheme and the formulation of moist thermodynamics while differences in the turbulent formulation are less relevant. The quantitative differences between the models across grid spacings highlight that the details of model physics and numerics are at least as important as the grid spacing.
Related papers
- Anthropogenic Heat in Urban Climate Systems: Forcing, Sensitivity, and Feedback
- NORi: An ML-Augmented Ocean Boundary Layer Parameterization
- A Checklist to assess the energy and carbon impacts of ML/AI applications in Earth System Modeling
- Quantifying AI data center nitrogen oxide (NO x) emissions from space
- Skillful Thunderstorm Forecasts Learned Directly from Observations
- Wind vector retrieval from miniaturized wave-enabled sea-surface drifters