Characterization and Novel Application of Power Over Fiber for Electronics in a Harsh Environment
summary
The gist
Power-over-Fiber (PoF) technology offers a reliable means of power transmission in cryogenic environments, which is crucial for applications like photon detector modules in experiments such as DUNE.
In short
Researchers developed Power-over-Fiber (PoF) technology to reliably power photon detector modules in extreme cryogenic environments like those at DUNE. They measured conversion efficiencies, characterized fiber performance under thermal stress, and mitigated light noise. Successful integration into a CERN test facility validated PoF as a viable method for high-voltage power delivery in cryogenic settings.
Key concepts
- Cryogenic Power Conversion Efficiency
- This measures how effectively optical light is turned into electrical power within the system. The efficiency was found to be about 51% in liquid nitrogen (LN2) and 45% at room temperature for a specific range of input light powers, depending on the semiconductor material used.
- Optical Fiber Characterization
- The study involved selecting and testing optical fibers specifically for PoF applications. The fibers have a core diameter of 62.5 micrometers and are protected by a black polyvinylidene fluoride (PVDF) jacket to ensure they can withstand the extreme cold and physical stresses of cryogenic operation.
- Light Noise Mitigation
- Excess light noise, which can interfere with sensitive detectors, was addressed by improving connections. Covering the optical power conversion components with electronic-grade silicone paste and copper tape reduced this noise significantly, bringing it down to a very low level suitable for sensitive measurements.
- Experimental Validation
- PoF technology was successfully tested at CERN to supply power to X-ARAPUCAs photodetectors in a high-voltage, cryogenic setting. The long-term test showed that the efficiency remained stable, varying by less than 2.6% over six months of operation.
Terminology used across episodes
This episode discusses
- Characterization and Novel Application of Power Over Fiber for Electronics in a Harsh Environment · Paper Radio
- Long-baseline neutrino oscillation physics potential of the DUNE experiment
- Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume II: DUNE Physics
- Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume I: Introduction to DUNE
- Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume IV: Far Detector Single-phase Technology
- The DUNE Far Detector Vertical Drift Technology, Technical Design Report
The paper
Characterization and Novel Application of Power Over Fiber for Electronics in a Harsh Environment · Read on arXiv
M. A. Arroyavea, B. Beherab, F. Cavannaa, A. Felda, F. Guoc, A. Heindelb, C.Ä K.Ã Jungc, ± Kocha, ń Leon Silveriobṽ, D. A Martinez Caicedob⠽, C. McGrew⠽, A. Paudela, W. Pellicoa, R. Riveraa, É Rodr´ıguez Rondonb⠽, S.Ş Sacerdotie, P. Shanahana, W. Shic⠽, ń Torres Mu˜nozb⠽, D. Totanid, C. Uyb⠽, C.Û Vermeulenb⠽, and H. Vieira de Souzae
Fermi National Accelerator Laboratory · South Dakota School of Mines and Technology · Stony Brook University, SUNY · University of California Santa Barbara · ƖUniversité Paris Cité, CNRS, Astroparticule et Cosmologie
Power-over-Fiber (PoF) technology has been used extensively in settings where high voltages require isolation from ground. In a novel application of PoF, power is provided to photon detector modules located on a surface at about 300 kV with respect to ground in the planned DUNE experiment. In cryogenic environments, PoF offers a reliable means of power transmission, leveraging optical fibers to transfer power with minimal system degradation. PoF technology excels in maintaining low noise levels when delivering power to sensitive electronic systems operating in extreme temperatures and high voltage environments. This paper presents the R & D effort of PoF in extreme conditions and underscores its capacity to revolutionize power delivery and management in critical applications, offering a dependable solution with low noise, optimal efficiency, and superior isolation.
DOI: 10.1088/1748-0221/19/10/P10019
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: We're looking at the paper: "Characterization and Novel Application of Power Over Fiber for Electronics in a Harsh Environment".
Paper summary: Kai: The paper lays out how they characterized their Power Over Fiber system, showing the efficiency numbers and the light noise mitigation strategies they used. They show that the optical-to-electrical power conversion efficiency of the OPCs was about fifty-one percent in liquid nitrogen and about forty-five percent at room temperature for a range of optical input powers from zero point five to one watt <ref:2405.16816#pg3>.
Mira: And the paper's title really reflects what it does, characterizing how Power Over Fiber works and applies it in a harsh environment, which is crucial because these settings are tough for sensitive electronics <ref:2405.16816#pg1>. They show they can manage power delivery reliably when you need isolation from the ground or operating at very low temperatures.
Lev: What this means for real hardware is that the system isn't just theoretical; it has been validated in a test facility at CERN, which is a major step toward making these kinds of power systems practical for large-scale experiments <ref:2405.16816#pg7>. The authors provide concrete data on performance in those specific conditions.
Kai: In simple terms, this paper tells us that Power Over Fiber technology has moved beyond just being something you read about; it's now a tested method for powering sensitive detectors in challenging settings like cryogenic environments and high voltage setups <ref:2405.16816#pg2>.
Mira: It shows the practical capability of Power Over Fiber to solve a real problem in high energy physics experiments where you need to power components that have specific environmental requirements <ref:2405.16816#pg3>.
Lev: And the authors clearly demonstrated how to handle the material science side, from fiber selection down to managing thermal losses and noise mitigation, which is exactly what engineers need when building something robust for those environments <ref:2405.16816#pg3>.
Conclusion: Kai: We've seen how they tested this Power Over Fiber setup in liquid nitrogen and other extreme conditions, and now we're going to talk about what that actually means for these kinds of experiments <ref:2405.16816#pg7>.
Mira: The title itself says "Characterization and Novel Application," which tells us they aren't just showing a cool experiment; they are really defining how reliable this power delivery system is in tough settings <ref:2405.16816#pg1>.
Lev: I mean, the authors really focused on the material science side—the fibers, the jackets, everything—which is where you find the real engineering hurdles when you try to make something work in deep cryogenics <ref:2405.16816#pg3>.
Kai: Yeah, they did a lot of work down there, and it seems like they've managed to bring this technology from just a concept into something that actually runs reliably for months in an operational environment <ref:2405.16816#pg7>.
Mira: What I find interesting is the efficiency numbers, like that fifty-one percent conversion rate in liquid nitrogen; that's not something you see easily when you talk about power transfer across a fiber <ref:2405.16816#pg3>.
Lev: From my side, those efficiencies are important because they tell us how much overhead we have to deal with on the actual hardware; if it's only fifty-one percent, that means the rest of the system has to work harder <ref:2405.16816#pg3>.
Kai: And they showed that even with those losses, the system can maintain a very low noise level when you plug in a lot of power and use some simple shielding techniques <ref:2405.16816#pg3>.
Mira: That noise mitigation part—covering the connectors with silicone paste and copper tape—that's practical advice for anyone trying to deploy this in a lab setting right now <ref:2405.16816#pg3>.
Lev: Yeah, but what they didn't cover much is how this scales up to massive arrays; we need to know if those losses stay linear or if they suddenly jump when you try to power ten thousand detectors instead of just one <ref:2405.16816#pg3>.
Kai: That's exactly what the next part of the paper should address, figuring out those scaling issues for real hardware applications <ref:2405.16816#pg3>.
More episodes
- 2611.14082-Two atoms with strong light-induced dipolar interactions
- 2611.14040-Characterization of BNLs 20 and 30 micrometer thick LGADs for the Electron Ion Collider
- 2611.13399-Lift-element-based dynamic network of vortex gust-airfoil interactions
- 2611.13476-Hopfion Superlattices in 3D Twisted Moir'e Light Fields
- 2611.13642-Investigation of the timing performance of double-sided p-type 3D silicon sensors produced by CNM
- 2611.13830-SiPM optical readout of a PICOSEC Micromegas precise timing detector
- 2611.14152-Where are the shortest-path nodes in spatial networks?
- 2611.14219-Sub-Ice: semi-automated mapping of basal channels from ice shelf surface elevation data
- 2611.16341-SUMNO: Spatially Unrolled Multigrid Neural Operator for Fluid Flow Surrogates
- 2611.16090-Multi-UTE Myelin Fraction Mapping: Repeatability and Cross-Field-Strength Reproducibility at 1.5T and 3T