Cavity optomechanics with a suspended resonant mirror

summary

The gist

Cavity optomechanics with a suspended resonant mirror investigates dispersive optomechanical effects in cavities consisting of a plane-plane arrangement of a broadband reflectivity mirror and an…

In short

This research investigates dispersive optomechanics in cavities using a broadband mirror and an ultrathin suspended resonant mirror, specifically focusing on Fano cavities. While analytical models predict certain shifts, experimental results show optical spring variations are much larger than expected. The study suggests photothermal effects from imperfect mode interference are the cause of this strong interaction.

Key concepts

Dispersive Optomechanics
This involves studying how light and mechanical vibrations interact in a cavity. When the light frequency is slightly detuned from the mechanical resonance, it causes a shift in the mechanical frequency, known as an optical spring effect. The paper examines this effect in complex structures like Fano cavities.
Fano Cavity Dynamics
A Fano cavity has unique light transmission properties due to interference between a broad reflection and a narrow resonance mode. This interference creates asymmetric behavior in the cavity's response, which is reflected in the optical spring shift, showing an asymmetric profile.
Photothermal Effects
These are extra losses caused by imperfect interference between different light modes within a grating structure. The authors propose that these losses, rather than standard linear coupling alone, are responsible for the unusually strong optomechanical interactions observed experimentally.
Optical Spring Shift
This is the change in the mechanical resonance frequency caused by the presence of light inside an optical cavity. It describes how much a mechanical object's natural vibration frequency is altered when coupled to light, which can be used to measure mechanical motion.

Terminology used across episodes

This episode discusses

The paper

Cavity optomechanics with a suspended resonant mirror · Read on arXiv

Department of Physics and Astronomy, Aarhus University · Department of Mechanical and Production Engineering, Aarhus University

We investigate optomechanical effects in cavities consisting of a plane-plane arrangement of a broadband reflectivity mirror and an ultrathin, suspended resonant mirror possessing a high-Q internal optical resonance. We first investigate dispersive optomechanics in such cavities on the basis of a generic analytical model as well as finite element method simulations of realistic structures. We then report on experimental optical spring measurements using a suspended silicon nitride membrane patterned with a subwavelength grating. While the observed optical spring variations qualitatively match those expected from the dispersive cavity optomechanics model, their magnitude is more than two orders of magnitude larger than predicted. We surmize that this strong optomechanical interaction is due to photothermal effects and put forward a phenomenological model that plausibly supports the observations.

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "Cavity optomechanics with a suspended resonant mirror".

Mira: Here's the gist of the paper. Cavity optomechanics with a suspended resonant mirror investigates dispersive optomechanical effects in cavities consisting of a plane-plane arrangement of a broadband reflectivity mirror and an ultrathin, suspended resonant mirror.

Kai: Dispersive Optomechanical Models The investigation begins by examining dispersive optomechanics in this canonical system using both an analytical model and finite element method simulations of realistic structures.

Mira: The authors show that the magnitude of the optical spring shift in a Fano cavity is the same as in the corresponding broadband mirror cavity with the same internal loss, despite linewidth reduction observed at short cavity lengths.

Kai: The analytical model for a broadband mirror cavity provides an expression for the mechanical resonance frequency shift, which is largest when ∆ = κB/√3.

Title and authors: Kai: Let's talk about the title, "Cavity optomechanics with a suspended resonant mirror," and who wrote it. It’s focused on how these specific structures can be used for studying light-matter interaction at the quantum level.

Mira: The authors are Trishala Mitra, Gurpreet Singh, Søren Peder Madsen, and Aur´elien Dantan. They bring together expertise in physics and mechanical engineering to tackle this problem.

Lev: From my side looking at what they built, it’s about realizing a specific type of cavity where you have a high-Q internal optical resonance on top of the main mirror structure.

Kai: So, the real point is that by putting that suspended resonant mirror in there, they change the dynamics significantly compared to standard Fabry-Perot cavities.

Mira: What this paper shows is how this specific configuration affects dispersive optomechanics and how those effects manifest in both theoretical models and their experimental results.

Lev: The paper sets up a framework for understanding these coupling mechanisms, which is important because it tells us what the physics should look like before we even start building the hardware.

The paper's summary: Kai: So, to summarize what they did in "Cavity optomechanics with a suspended resonant mirror," they first looked at dispersive optomechanics using both an analytical model and finite element method simulations of real structures.

Mira: They then reported on experimental optical spring measurements using a suspended silicon nitride membrane that had a subwavelength grating pattern.

Lev: The key finding there is that the observed optical spring variations qualitatively match what the dispersive cavity optomechanics model predicted, but their actual magnitude was more than two orders of magnitude bigger than the model predicted.

Kai: They conclude by surmising this strong interaction is caused by photothermal effects and they propose a phenomenological model to account for it.

Mira: This means they are essentially combining the standard dispersive linear coupling with an extra treatment for light losses caused by imperfect interference between the incident mode and the guided mode in the grating.

Lev: It’s interesting that they are treating this as a separate phenomenon rather than just ignoring it, which is necessary because these extra losses are significant.

The paper's improvements: Kai: One improvement they suggest is to incorporate photothermal modeling directly into the system simulations to predict strong optomechanical interactions that go beyond standard dispersive linear coupling.

Mira: They also propose enhancing the analytical models by explicitly including a photothermal force term in the equations of motion for cavity optomechanics.

Lev: If they can do that, it would allow AI systems to more accurately predict those optical spring frequency shifts when extra losses limit peak reflectivity, which is what equation fifty-six describes.

Kai: They also suggest upgrading simulation pipelines to handle finite-size grating effects using finite element method simulations, including things like beam collimation and finite grating size losses.

Mira: This lets AI systems validate the coupled-mode model against real experimental structures, just as they did in section three of the paper.

Lev: And on the experimental side, they suggest improving data analysis tools to fit equation fifty more robustly across different cavity lengths and power regimes to extract parameters like alpha which is noted to be considerably much larger than one.

Conclusion: Kai: So, wrapping up the paper "Cavity optomechanics with a suspended resonant mirror," they summarize that linewidth narrowing at short lengths comes with a reduction in the optomechanical coupling compared to broadband cavities.

Mira: They also emphasize that those strong interactions observed suggest Fano cavities with suspended resonant mirrors are promising for quantum optomechanics using membrane-at-the-end cavities.

Lev: If I had to say something, the key thing is that you need to account for the photothermal effects because they are what drive those large shifts in the lab data.

Kai: I agree, that extra treatment is what bridges the gap between theory and experiment here.

Mira: It shows us that these specific geometries are viable candidates for building devices with suspended mirrors at the end of optical cavities for quantum applications.

More episodes

← Home