A new diffuse reflector filament for additive manufacturing of 3D printing finely-segmented plastic scintillator
summary
The gist
This study presents the development and characterization of novel white reflective filaments suitable for additive manufacturing of finely segmented plastic scintillators <ref:2604.26033#pg2> because…
In short
Researchers developed novel white reflective filaments for 3D printing plastic scintillators using polycarbonate (PC) and polymethyl methacrylate (PMMA). By optimizing additive powders like TiO2 and PTFE, they created formulations that improved light yield and reduced crosstalk. The PMMA-based filament proved optimal for achieving the highest light yield in a segmented detector prototype.
Key concepts
- Reflective Filament Formulations
- This involves mixing polymer granules (PC or PMMA) with reflective powders like titanium dioxide (TiO2) and polytetrafluoroethylene (PTFE). The goal is to create a filament that reflects light efficiently, which is crucial for making plastic scintillators work well in 3D printing.
- Light Crosstalk
- Light crosstalk refers to unwanted light leakage between different segments of the scintillator when it is used in a detector. Lower crosstalk means the detector can clearly distinguish individual signals, leading to better performance and more accurate measurements.
- Light Yield (p.e./MIP/channel)
- Light yield measures how many photoelectrons are generated per Million Incident Photons per channel. A higher light yield indicates that the scintillator is converting incident radiation into a stronger signal, which is essential for detecting low-energy particles effectively.
- Additive Manufacturing (3D Printing)
- This refers to building complex objects layer by layer using 3D printing technology. The study focuses on using these new reflective filaments to create finely segmented plastic scintillators, allowing for precise manufacturing without needing traditional subtractive processes.
Terminology used across episodes
This episode discusses
- A new diffuse reflector filament for additive manufacturing of 3D printing finely-segmented plastic scintillator · Paper Radio
- A new diffuse reflector filament for additive manufacturing of 3D printing finely-segmented plastic scintillator
- Application of large area SiPMs for the readout of a plastic scintillator based timing detector
- Design, Calibration, and Performance of the MINERvA Detector
- A 4pi time-of-flight detector for the ND280/T2K upgrade
- The T2K Fine-Grained Detectors
- The magnetized steel and scintillator calorimeters of the MINOS experiment
- The Electromagnetic Calorimeter for the T2K Near Detector ND280
- A novel segmented-scintillator antineutrino detector
- A fully active fine grained detector with three readout views
- Total Neutron Cross-section Measurement on CH with a Novel 3D-projection Scintillator Detector
- Neutron detection and application with a novel 3D-projection scintillator tracker in the future long-baseline neutrino oscillation experiments
- The Super Fine-Grained Detector for the T2K neutrino oscillation experiment
- A novel polystyrene-based scintillator production process involving additive manufacturing
- Demonstrating a single-block 3D-segmented plastic-scintillator detector
- Additive manufacturing of inorganic scintillator-based particle detectors
- Beam test results of a fully 3D-printed plastic scintillator particle detector prototype
The paper
A new diffuse reflector filament for additive manufacturing of 3D printing finely-segmented plastic scintillator · Read on arXiv
A. Krechਁ, A. Boyarintsevਁ, B. Grynyovਁ, N. Karavaevaਁ, S. Minenko△, T. Sibilieva△, M. Sibilyev△, T. Diemingerb U., Kose B., Li b A., Rubbia b D., Sgalaberna b T., Weber b J. Wülichb, X. Zhao b S.ärnsc, d, e E.Ėillat c, d, e S.Ėugon c, d, e A. De Roeck f
Institute for Scintillation Materials NAS of Ukraine · ETH Zurich · Haute Ecole Spécialisée de Suisse Occidentale · Haute Ecole d’IngĘnie du canton de Vaud · COMATEC-AddiPole
This study presents the development and the characterisation of a novel white, reflective filament suitable for additive manufacturing of finelysegmented plastic scintillators. The filament is based on polycarbonate (PC) and polymethyl methacrylate (PMMA) polymers loaded with titanium dioxide (TiO 2) and polytetrafluoroethylene (PTFE) to enhance reflectivity. A range of filament compositions and thicknesses was evaluated through optical reflection and transmittance measurements of reflective layers made with the Fused Deposition Modelling (FDM) technique. A 3D-segmented plastic scintillator prototype was made with fused injection modelling (FIM) and tested with cosmic-ray muons to assess the light yield and the optical crosstalk. The results of this study demonstrate the feasibility of producing compact, modular 3D-printed scintillator detectors with a performance comparable to that of standard plastic scintillator detectors whilst exhibiting lower light crosstalk and higher light yield, owing to the improved optical properties of the reflector material.
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "A new diffuse reflector filament for additive manufacturing of 3D printing finely-segmented plastic scintillator".
Mira: Here's the gist of the paper. This study presents the development and characterization of novel white reflective filaments suitable for additive manufacturing of finely segmented plastic scintillators <ref:2604.26033#pg2> because these new filaments demonstrate improved optical properties leading to a lower light crosstalk and a higher light yield compared to previous works <ref:2604.26033#pg2>.
Kai: Development of Reflective Filament Formulations The research involved developing white reflective filaments based on polycarbonate (PC) and polymethyl methacrylate (PMMA) polymers, loaded with titanium dioxide (TiO2) and polytetrafluoroethylene (PTFE) to enhance reflectivity <ref:2604.26033#pg2>.
Mira: Reflective filaments were fabricated by thermally extruding polymer-additive mixtures using both laboratory and industrial-scale equipment <ref:2604.26033#pg2>.
Kai: Polymer granules (PC or PMMA) were first mixed with reflective additive powders, specifically TiO2 and PTFE, in a batch mixer to ensure uniform distribution <ref:2604.26033#pg2>.
Title and authors: Kai: Moving on, the paper title is "A new diffuse reflector filament for additive manufacturing of finely segmented plastic scintillator," which basically tells us they are proposing a new way to make white reflective filaments for these detectors using three dee printing <ref:2604.26033#pg1,A new diffuse reflector filament for additive manufacturing of>.
Mira: It’s about finding a material that works well with the additive manufacturing process, specifically FDM, because they showed that FDM doesn't degrade the optical performance of standard polystyrene based scintillators.
Lev: They are looking at overcoming the issue where you have to mix materials during simultaneous printing, which was a problem with polystyrene and PST-based reflectors before.
Kai: The paper explains that they demonstrated filaments composed of polystyrene and polymethyl methacrylate blended with titanium dioxide could serve as effective reflective components for this kind of application.
Mira: They also showed that an inorganic scintillator can be obtained by embedding inorganic granules into a polymer matrix and using it for three dee printing, which is a way to get the reflector material in there <ref:2604.26033#pg1>.
Lev: The main thing they are doing here is automating the fabrication of finely segmented detectors by allowing you to print both the scintillator and reflective materials at the same time using two extruders.
Kai: It’s about moving away from manual assembly toward an automated way of building these complex, finely segmented structures.
Mira: The implication for us is that this opens up a new path for creating detectors where you don't have to rely on traditional, less precise fabrication methods for the reflective parts.
Lev: It suggests a much more integrated manufacturing process for these detectors because you can control the material mixing during the build itself.
Kai: So, we’ve seen they are proposing a new filament formulation that addresses both the material compatibility and the need for high reflectivity in this new additive manufacturing context.
The paper's summary: Mira: They summarize their work by showing how they developed and characterized these novel white reflective filaments based on polycarbonate and polymethyl methacrylate polymers loaded with titanium dioxide and polytetrafluoroethylene to enhance reflectivity.
Kai: They detail the process, which involves first mixing the polymer granules, like PC or PMMA, with the reflective additive powders, specifically TiO2 and PTFE in a batch mixer to make sure everything is distributed uniformly.
Lev: The characterization of those additive powders itself was important because they measured their pure optical performance before putting them into any polymer matrices at all.
Mira: They found that pure polytetrafluoroethylene showed the highest reflectivity, with measured values exceeding one hundred percent, and titanium dioxide also had good performance at ninety-four point six percent reflectance at four hundred twenty nanometers.
Kai: When they combined the TiO2 and PTFE in a two to one weight ratio, they saw that it didn't actually yield a significant enhancement over using them alone, achieving ninety-four point three percent reflectance at four hundred twenty nanometers.
Mira: Then for the PC based filaments, the formulation with ten percent titanium dioxide and five percent PTFE demonstrated the highest reflectivity among all of the PC based samples in that four hundred ten to four hundred fifty nanometer wavelength range.
Lev: This characterization step was crucial because it determined which specific powder combination actually worked best before they moved on to testing it in a polymer matrix.
Kai: And then they compared the performance of the resulting filaments, showing that PMMA-based samples exhibited both higher reflectivity and higher transmittance compared to PC-based samples overall.
Mira: They specifically noted that at four hundred twenty nanometers, the reflectivity of zero point four millimeter thick PMMA samples reached ninety point five percent, exceeding what was seen in the PC samples.
Lev: But they pointed out that this improved performance came with increased light transmittance being three point seven percent for PMMA versus only zero point six percent for PC at zero point four millimeter thickness.
Kai: And they mentioned that adding PTFE to the PMMA didn't improve things because the PMMA matrix is already very transparent and absorbs less light.
The paper's improvements: Mira: The paper highlights a few improvements over previous work, focusing on the specific formulations they developed for PC and PMMA filaments that maximize reflectivity in their respective polymer systems.
Kai: For the PC based filaments, they found that ten percent titanium dioxide and five percent PTFE was the optimal combination for achieving a reflectivity of eighty-five point five percent at four hundred twenty nanometers.
Lev: That specific formulation is important because it sets a benchmark for what you can expect when designing your reflector material for this application.
Mira: For the PMMA based filaments, they found that fifteen percent of titanium dioxide was enough to achieve even higher reflectivity, reaching ninety-two point zero percent for a zero point two millimeter thickness sample.
Kai: So the improvement lies in finding that specific loading ratio of TiO2 in PMMA for better performance than just mixing it with PTFE.
Lev: The results on the SuperLayer prototype are also noteworthy because it achieved the highest light yield of about thirty-one point two photoelectrons, which outperformed both existing benchmarks.
Mira: Plus, they showed that both PMMA and PC based SuperLayers exhibited excellent optical isolation with a mean of zero point seven percent crosstalk across all channels.
Kai: So the overall improvement is that they’ve found specific loading ratios for each polymer that give you the best combination of reflectivity and light yield and low crosstalk.
Conclusion: Kai: So to wrap up, these results from this paper show that for PC based filaments, the optimal formulation was ten percent titanium dioxide and five percent PTFE, giving a reflectivity of eighty-five point five percent at four hundred twenty nanometers.
Mira: And for PMMA based filaments, fifteen percent of titanium dioxide was sufficient to reach ninety-two point zero percent reflectivity with a zero point two millimeter thickness.
Lev: From my side, I think the most practical implication is that this is the material choice you need to consider when designing your detector components.
Kai: And for the light yield, the SuperLayer built with PMMA achieved about thirty-one point two photoelectrons per million information points per channel, beating both existing prototypes.
Mira: And for crosstalk, they showed that both PMMA and PC based SuperLayers had a mean of zero point seven percent crosstalk across all channels.
Lev: So ultimately, the paper "A new diffuse reflector filament for additive manufacturing of finely segmented plastic scintillator" gives us specific material guidance on what to use when you’re designing these components.
More episodes
- 2611.14082-Two atoms with strong light-induced dipolar interactions
- 2611.14040-Characterization of BNLs 20 and 30 micrometer thick LGADs for the Electron Ion Collider
- 2611.13399-Lift-element-based dynamic network of vortex gust-airfoil interactions
- 2611.13476-Hopfion Superlattices in 3D Twisted Moir'e Light Fields
- 2611.13642-Investigation of the timing performance of double-sided p-type 3D silicon sensors produced by CNM
- 2611.13830-SiPM optical readout of a PICOSEC Micromegas precise timing detector
- 2611.14152-Where are the shortest-path nodes in spatial networks?
- 2611.14219-Sub-Ice: semi-automated mapping of basal channels from ice shelf surface elevation data
- 2611.16341-SUMNO: Spatially Unrolled Multigrid Neural Operator for Fluid Flow Surrogates
- 2611.16090-Multi-UTE Myelin Fraction Mapping: Repeatability and Cross-Field-Strength Reproducibility at 1.5T and 3T