Euclid Data Release 1 (DR1): Calibration strategy and observations
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Astrophysics. The day in astrophysics: observations, models and what the data forces.
Vera: We're looking at the paper: "Euclid Data Release 1 (DR1)".
Jocelyn: Here's the gist of the paper. The paper reviews how Euclid’s top-level calibration requirements were translated into a comprehensive calibration plan, detailing its implementation and maintenance throughout the survey, and assessing its performance in the current Data Release 1 (DR1).
Vera: The methodology employs a two-tier calibration concept derived from mission requirements: high-level top-level requirements (CalCD-A) and lower-level error budgets (CalCD-B).
Jocelyn: The practical execution of this plan is managed through a pragmatic system termed the Calibration Framework (CalF), which is implemented using python-sphinx, providing an HTML information base as a central reference for all calibration matters.
Vera: This plan was developed conservatively to ensure adequate signal-to-noise ratio (S/N) and margins.
Paper summary: Vera: So, to wrap up this discussion on "Euclid Data Release one (DR1): Calibration strategy and observations" by Schirmer et al <ref:2611.16546#pg1,Euclid Data Release 1 (DR1): Calibration strategy and observations>. it essentially shows how they took all those big mission calibration requirements from the start and turned them into a plan, detailing how it performed in Data Release one <ref:2611.16546#pg1>.
Jocelyn: They are pointing out that while DR1 hits most of the end-of-mission spectrophotometric calibration requirements, there are still major outstanding items like getting that ninety-nine percent pure and complete spectroscopic redshift reference sample <ref:2611.16546#pg3>.
Subrahmanyan: And they also highlight the fact that the VIS point spread function model is still under development, which is a huge technical hurdle for accurate measurements <ref:2611.16546#pg2>.
Vera: The authors are showing that DR1 already meets or exceeds most of those end-of-mission spectrophotometric calibration requirements <ref:2611.16546#pg1>.
Jocelyn: But they also stress that the next steps involve those more accurate flux calibrations and better handling of persistence effects in NISP before they move to Data Release two <ref:2611.16546#pg2> <ref:2611.16546#pg2>.
Subrahmanyan: And for anyone listening who doesn't know Euclid, this paper shows exactly how they are making sure that when they look at distant galaxies, the measurements are trustworthy enough for serious cosmological conclusions <ref:2611.16546#pg3>.
Conclusion: Vera: So, we're wrapping up this look at "Euclid Data Release one: Calibration strategy and observations." This paper shows how they translated huge mission goals into a concrete plan, and how that plan actually played out in the first big data release.
Jocelyn: They're essentially giving us the blueprint for trust in Euclid's measurements before we even look at the final science.
Subrahmanyan: The authors confirm that Data Release one already meets most of those end-of-mission calibration needs, which is a solid foundation for what we can do right now.
Vera: But they also lay out exactly where the work isn't finished, like needing more data to get a perfectly pure and complete sample of galaxies for spectroscopy.
Jocelyn: And they highlight that the point spread function model—how well Euclid is resolving the shapes of things—is still being refined, which is a technical challenge that can't be solved just by taking more pictures.
Subrahmanyan: It also shows how they reprocessed all that DR1 data using their new software setup, and this process uncovered some subtle effects they can use to correct for in the next release.
Vera: These corrections include things like absolute flux calibration, astrometry, and fixing errors from shutter effects or water ice contamination in the spectra.
Jocelyn: And they even show how Euclid’s measurements line up with data from other major telescopes like Roman and the James Webb Space Telescope.
Subrahmanyan: That multi-wavelength connection is crucial because it helps us connect our distant galaxy measurements to the bigger picture of dark energy and how structure forms in the universe.
Vera: So, while DR1 gives us a lot to work with, we still have these specific observational needs left for Data Release three.
Jocelyn: The next step involves sharpening those flux calibrations and fixing persistence effects before we get to Data Release two.
Subrahmanyan: It’s a clear roadmap: DR1 is good, but DR2 needs to focus on those specific systematic corrections to push closer to the final mission specs.
Vera: So, the big picture here is that we are getting very close to having a fully calibrated survey, but we still have these specific observational needs left for Data Release three.
M. Schirmer, K. Paterson, A. Alavi, B. Altieri, P. N. Appleton, N. Auricchio, H. Aussel, R Azzollini
European Southern Observatory (ESO) · Caltech/IPAC
astro-ph.IM, astro-ph.CO
Submitted: 2026-11-12
Updated: 2026-11-12
Comments: 43 pages, 17 figures; companion paper of Euclid DR1
Code: https://github.com/bd-j/sedpy
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 100/100
The gist: The paper reviews how Euclid’s top-level calibration requirements were translated into a comprehensive calibration plan, detailing its implementation and maintenance throughout the survey…
Key concepts
- Top-Level Requirements (CalCD-A)
- These are the highest-level calibration goals set by the mission. They dictate what the final data product must achieve in terms of accuracy and quality. The paper shows how these broad mission needs were broken down into more manageable, specific tasks for the survey.
- Calibration Framework (CalF)
- This is a pragmatic system used to execute the calibration plan. It uses python-sphinx to create an HTML information base that serves as a central reference point for all calibration details. This framework manages the ongoing monitoring and maintenance of the complex calibration process.
- Spectroscopic Completeness and Purity
- These terms refer to how well Euclid captures all necessary data for spectroscopy (completeness) and how clean that data is, meaning it has minimal contamination (purity). The paper notes that achieving very high purity levels for reference samples is still a challenge.
- Point-Spread-Function (PSF) Modeling
- The PSF describes how the telescope blurs the image of a point source. Accurately modeling this effect, especially for shear calibration, is difficult because it requires a complex, chromatic model of the VIS instrument's performance. This modeling is still converging toward stringent accuracy targets.
Terminology
Summary
The paper reviews how Euclid’s top-level calibration requirements were translated into a comprehensive calibration plan, detailing its implementation and maintenance throughout the survey, and assessing its performance in the current Data Release 1 (DR1). p. 0 Azzollini, et al. (Full author list and affiliations details can be found after the references)
November 13, 2026
ABSTRACT
This paper reviews how Euclid’s top-level calibration requirements were translated into a calibration plan, how this plan is implemented and
maintained during the survey, and how it performs in the current DR1 release. A&A proofs: manuscript no. Calibration concept document – part A
The CalCD-A contains 15 top-level requirements on pointspread function (PSF) and shear calibration, spectrophotometry,
photometric redshifts, and spectroscopy (Table A. 2013) team for the same purpose. This calibration framework (hereafter CalF) provides an html information
base as the central reference for all practical calibration matters. When constructing the in-flight
calibration plan (Sect. 2), a conservative approach was followed to ensure sufficient signal-to-noise ratio (S/N) and margins, in particular where the CalCD-B was uncertain.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
The review indicates that DR1 largely meets or exceeds most end-of-mission spectrophotometric calibration requirements. p. 0 (Full author list and affiliations details can be found after the references)
November 13, 2026
ABSTRACT
This paper reviews how Euclid’s top-level calibration requirements were translated into a calibration plan, how this plan is implemented and
maintained during the survey, and how it performs in the current DR1 release. We show that DR1 already meets or exceeds most end-of-mission
spectrophotometric calibration requirements. We show that DR1 already meets or exceeds most end-of-mission
spectrophotometric calibration requirements. The construction of spectroscopically complete and pure samples relies on ongoing data acquisition
for the Euclid Deep Survey, while point-spread-function modelling and shear calibration are still converging to their stringent accuracy requirements.Where the paper says it
Where the paper says it
Specific limitations regarding redshift requirements include: MRD-GC-006 demands a purity of P > 99% for the EDS reference redshift sample, which cannot yet be formally assessed; instead, a purity of P = 85% (with a redshift-reliability threshold of SPE_Z_PROB > 0.99) is achieved. p. 1 For every major data release (DR), once the data have been
reprocessed with a frozen pipeline configuration, the SGS does a
full verification against CalCD-A requirements. Verification may
also occur between releases, for example when major development milestones have been achieved and are regression-tested on
several hundred square degrees of data (section 7 in Euclid Collaboration: Ruffenach et al. MRD-GC-007 requires P > 80% for the EWS. The current
best estimate, obtained from the COSMOS and EDF-N data, is
P ≈ 75% at a number density of galaxies with correct redshifts
of D > 1700 deg−2
. A more robust assessment remains contingent on the
full-depth EDF-N data. PSF requirements
Shear calibration requires a highly complicated, chromatic
model of the VIS PSF that is still under development at the time
of writing.Where the paper says it
Where the paper says it
Where the paper says it
The implementation details emphasize the self-calibration concept as the central pillar of the plan. p. 0 The factors that
govern the development and maintenance of the calibration plan,
including the sensitivity of Euclid to solar stray light and to Xrays from solar flares, are explained in Sects. The selfcalibration concept, which forms the central pillar of the calibration plan, is introduced in Sect. : DR1: Calibration strategy and observations
2. Redshift requirements
MRD-GC-006 (Table A. The CalCD-A requirements
that are still unmet – purity and completeness of the spectroscopic redshift sample, and the VIS PSF model – are discussed
in Sect. Calibration concept document part B
The CalCD-B unfolds the CalCD-A requirements into individual
error budgets and dependence trees, comprising approximately
350 entries.Where the paper says it
Where the paper says it
Where the paper says it
Upcoming changes for DR2 include VIS shutter correction, more accurate absolute flux calibration, better handling of persistence and contamination effects in NISP, improved wavelength calibration, and the development of correction strategies for DR2. p. 0 With all DR1 data reprocessed with the DR1 pipeline configuration, more subtle effects have been detected and characterised, and correction strategies have been developed for DR2. These include improved absolute flux calibration, astrometry, charge-persistence correction, shutter
effects, wavelength calibration, and spectrophotometric corrections for water-ice contamination. The limitations of the DR1 data and the improvements planned for DR2 are discussed in Sect. Synthetic transformations between the Euclid, Roman, James Webb Space Telescope (JWST), and CSST photometric systems are presented in
Sect. We show that DR1 already meets or exceeds most end-of-mission
spectrophotometric calibration requirements. The construction of spectroscopically complete and pure samples relies on ongoing data acquisition
for the Euclid Deep Survey, while point-spread-function modelling and shear calibration are still converging to their stringent accuracy requirements. Like the
MRD, the CalCD-A is under ownership of the European Space
Agency (ESA) and immutable. Formally, CalCD-A requirements must be met by DR3 at the
end of the nominal mission.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improve accuracy of absolute flux calibration by establishing an unbroken calibration chain for NISP-P standards traceable via HST CALSPEC and faint WD standards, ensuring "Euclid’s absolute flux calibration to become traceable via an unbroken calibration chain linked to standards maintained by the National Institute of Standards and Technology (NIST; Peretz et al. 2024), at the sub-per-cent level."
-
Enhance photometric transformation capabilities by deriving reference transformations from well-defined sequences of warm stars in synthetic colour colour space, enabling
a direct photometric comparison across surveys
between Euclid, Roman, JWST, and CSST. -
Improve spectral analysis for NISP data by developing a more accurate model to correct for water ice contamination using
four-layer AR coating-stack models that approximate the measured QE for the uncontaminated detectors
and infer ice thickness from monthly flat measurements. -
Increase astrometric precision by implementing an improved persistence masking scheme in DR2, aiming to lower the masked pixel fraction
to possibly 2%
and addressing residual errors wherethe total 1sigma-error in the measured position of an object must be smaller than 0.3 pixels or 0.7 arcseconds.
-
Develop a refined model for VIS PSF reconstruction by improving the spatio-temporal variation modeling, allowing for a "residual model uncertainty of sigma(ei) < 2x10-4 per exposure and per ellipticity component with respect to the system PSF."
Abstract
This paper reviews how Euclid's top-level calibration requirements were translated into a calibration plan, how this plan is implemented and maintained during the survey, and how it performs in the current DR1 release. We show that DR1 already meets or exceeds most end-of-mission spectrophotometric calibration requirements. The construction of spectroscopically complete and pure samples relies on ongoing data acquisition for the Euclid Deep Survey, while point-spread-function modelling and shear calibration are still converging to their stringent accuracy requirements. With all DR1 data reprocessed with the DR1 pipeline configuration, more subtle effects have been detected and characterised, and correction strategies have been developed for DR2. These include improved absolute flux calibration, astrometry, charge-persistence correction, shutter effects, wavelength calibration, and spectrophotometric corrections for water-ice contamination. Finally, synthetic photometric transformations between Euclid and each of Roman, the James Webb Space Telescope, and the Chinese Space-station Survey Telescope, are presented.
Sources
- Euclid preparation. Refining input galaxy shape distributions for shear calibration simulations
- Euclid Near Infrared Spectro-Photometer: spatial considerations on H2RG detectors interpixel capacitance and IPC corrected conversion gain from on-ground characterization
- Characterization of the CSST Survey Camera CCDs: I. basic electro-optical performance
- NEXUS: the North ecliptic pole EXtragalactic Unified Survey
Related papers
- On-sky demonstration of a vector Zernike wavefront sensor in a cascaded adaptive optics system
- The General Antiparticle Spectrometer (GAPS) Antarctic Balloon Payload
- Detection and excision of radio-frequency interference in radio arrays
- Unified matched-filter and excess-power pipeline for gravitational-wave detector characterization
- Ushering in sub-arcsecond angular resolution observatories in the far-infrared: The case for a double-Fourier interferometer
- A design concept for the High Resolution Imager on the Habitable Worlds Observatory