Euclid Data Release 1 (DR1): Calibration strategy and observations
summary
The gist
The paper reviews how Euclid’s top-level calibration requirements were translated into a comprehensive calibration plan, detailing its implementation and maintenance throughout the survey…
In short
This paper reviews how Euclid's high-level calibration goals were translated into a plan, implemented through a framework called CalF. DR1 largely meets most spectrophotometric requirements, but spectroscopic completeness and purity are still limited. Key ongoing work involves refining point-spread-function modeling and developing correction strategies for DR2, which will include improved flux calibration and handling of contamination.
Key concepts
- Top-Level Requirements (CalCD-A)
- These are the highest-level calibration goals set by the mission. They dictate what the final data product must achieve in terms of accuracy and quality. The paper shows how these broad mission needs were broken down into more manageable, specific tasks for the survey.
- Calibration Framework (CalF)
- This is a pragmatic system used to execute the calibration plan. It uses python-sphinx to create an HTML information base that serves as a central reference point for all calibration details. This framework manages the ongoing monitoring and maintenance of the complex calibration process.
- Spectroscopic Completeness and Purity
- These terms refer to how well Euclid captures all necessary data for spectroscopy (completeness) and how clean that data is, meaning it has minimal contamination (purity). The paper notes that achieving very high purity levels for reference samples is still a challenge.
- Point-Spread-Function (PSF) Modeling
- The PSF describes how the telescope blurs the image of a point source. Accurately modeling this effect, especially for shear calibration, is difficult because it requires a complex, chromatic model of the VIS instrument's performance. This modeling is still converging toward stringent accuracy targets.
Terminology used across episodes
This episode discusses
- Euclid Data Release 1 (DR1): Calibration strategy and observations · Paper Radio
- Euclid preparation. Refining input galaxy shape distributions for shear calibration simulations
- Euclid Near Infrared Spectro-Photometer: spatial considerations on H2RG detectors interpixel capacitance and IPC corrected conversion gain from on-ground characterization
- Characterization of the CSST Survey Camera CCDs: I. basic electro-optical performance · Paper Radio
- NEXUS: the North ecliptic pole EXtragalactic Unified Survey
The paper
Euclid Data Release 1 (DR1): Calibration strategy and observations · Read on arXiv
M. Schirmer, K. Paterson, A. Alavi, B. Altieri, P. N. Appleton, N. Auricchio, H. Aussel, R Azzollini
European Southern Observatory (ESO) · Caltech/IPAC
This paper reviews how Euclid's top-level calibration requirements were translated into a calibration plan, how this plan is implemented and maintained during the survey, and how it performs in the current DR1 release. We show that DR1 already meets or exceeds most end-of-mission spectrophotometric calibration requirements. The construction of spectroscopically complete and pure samples relies on ongoing data acquisition for the Euclid Deep Survey, while point-spread-function modelling and shear calibration are still converging to their stringent accuracy requirements. With all DR1 data reprocessed with the DR1 pipeline configuration, more subtle effects have been detected and characterised, and correction strategies have been developed for DR2. These include improved absolute flux calibration, astrometry, charge-persistence correction, shutter effects, wavelength calibration, and spectrophotometric corrections for water-ice contamination. Finally, synthetic photometric transformations between Euclid and each of Roman, the James Webb Space Telescope, and the Chinese Space-station Survey Telescope, are presented.
Transcript
Introduction to the show: ident: Astrophysics. The day in astrophysics: observations, models and what the data forces.
Vera: We're looking at the paper: "Euclid Data Release 1 (DR1)".
Jocelyn: Here's the gist of the paper. The paper reviews how Euclid’s top-level calibration requirements were translated into a comprehensive calibration plan, detailing its implementation and maintenance throughout the survey, and assessing its performance in the current Data Release 1 (DR1).
Vera: The methodology employs a two-tier calibration concept derived from mission requirements: high-level top-level requirements (CalCD-A) and lower-level error budgets (CalCD-B).
Jocelyn: The practical execution of this plan is managed through a pragmatic system termed the Calibration Framework (CalF), which is implemented using python-sphinx, providing an HTML information base as a central reference for all calibration matters.
Vera: This plan was developed conservatively to ensure adequate signal-to-noise ratio (S/N) and margins.
Paper summary: Vera: So, to wrap up this discussion on "Euclid Data Release one (DR1): Calibration strategy and observations" by Schirmer et al <ref:2611.16546#pg1,Euclid Data Release 1 (DR1): Calibration strategy and observations>. it essentially shows how they took all those big mission calibration requirements from the start and turned them into a plan, detailing how it performed in Data Release one <ref:2611.16546#pg1>.
Jocelyn: They are pointing out that while DR1 hits most of the end-of-mission spectrophotometric calibration requirements, there are still major outstanding items like getting that ninety-nine percent pure and complete spectroscopic redshift reference sample <ref:2611.16546#pg3>.
Subrahmanyan: And they also highlight the fact that the VIS point spread function model is still under development, which is a huge technical hurdle for accurate measurements <ref:2611.16546#pg2>.
Vera: The authors are showing that DR1 already meets or exceeds most of those end-of-mission spectrophotometric calibration requirements <ref:2611.16546#pg1>.
Jocelyn: But they also stress that the next steps involve those more accurate flux calibrations and better handling of persistence effects in NISP before they move to Data Release two <ref:2611.16546#pg2> <ref:2611.16546#pg2>.
Subrahmanyan: And for anyone listening who doesn't know Euclid, this paper shows exactly how they are making sure that when they look at distant galaxies, the measurements are trustworthy enough for serious cosmological conclusions <ref:2611.16546#pg3>.
Conclusion: Vera: So, we're wrapping up this look at "Euclid Data Release one: Calibration strategy and observations." This paper shows how they translated huge mission goals into a concrete plan, and how that plan actually played out in the first big data release.
Jocelyn: They're essentially giving us the blueprint for trust in Euclid's measurements before we even look at the final science.
Subrahmanyan: The authors confirm that Data Release one already meets most of those end-of-mission calibration needs, which is a solid foundation for what we can do right now.
Vera: But they also lay out exactly where the work isn't finished, like needing more data to get a perfectly pure and complete sample of galaxies for spectroscopy.
Jocelyn: And they highlight that the point spread function model—how well Euclid is resolving the shapes of things—is still being refined, which is a technical challenge that can't be solved just by taking more pictures.
Subrahmanyan: It also shows how they reprocessed all that DR1 data using their new software setup, and this process uncovered some subtle effects they can use to correct for in the next release.
Vera: These corrections include things like absolute flux calibration, astrometry, and fixing errors from shutter effects or water ice contamination in the spectra.
Jocelyn: And they even show how Euclid’s measurements line up with data from other major telescopes like Roman and the James Webb Space Telescope.
Subrahmanyan: That multi-wavelength connection is crucial because it helps us connect our distant galaxy measurements to the bigger picture of dark energy and how structure forms in the universe.
Vera: So, while DR1 gives us a lot to work with, we still have these specific observational needs left for Data Release three.
Jocelyn: The next step involves sharpening those flux calibrations and fixing persistence effects before we get to Data Release two.
Subrahmanyan: It’s a clear roadmap: DR1 is good, but DR2 needs to focus on those specific systematic corrections to push closer to the final mission specs.
Vera: So, the big picture here is that we are getting very close to having a fully calibrated survey, but we still have these specific observational needs left for Data Release three.
More episodes
- 2607.17929-gevolution 2.0: GPU-accelerated relativistic N-body simulations for cosmology
- The day in conversation for 2026-11-19
- Daily Summary for 2026-11-19
- 2509.02657-On the synergetic use of Ariel and JWST for exoplanet atmospheric science
- 2609.10042-Modelling Fourier filtering wavefront sensors for PSD-based methods: the AOPERA tool
- 2511.05639-Performance of the AstroPix Prototype Module for the Barrel Imaging Calorimeter at the ePIC Detector and in Space-Based Payloads
- 2610.19909-RPCA: a Resolved PSF reconstruction method for undersampled images
- 2512.03440-An Analysis of LIGO Glitches Using t-SNE During the First Part of the Fourth LIGO-Virgo-KAGRA Observing Run
- 2608.10284-Lunar Reflective Interferometry
- 2610.16633-Institutional broadening of the Japanese astronomy and astrophysics research community during 1996-2025