Thin-film lithium niobate integrated photonics at 493 nm

arXiv:2611.14474 · physics.optics · Submitted 2026-11-10 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "Thin-film lithium niobate integrated photonics at 493 nm".

Paper summary: Kai: So to recap what this paper is about, it’s demonstrating a thin-film lithium niobate platform operating at four hundred ninety three nanometers that integrates grating couplers, beamsplitters, ring resonators, and modulators.

Mira: The core thesis is that while integrated photonics offers scalable control for visible wavelengths, most platforms currently lack the gigahertz-scale modulation needed to resolve things like hyperfine structure or drive Raman transitions.

Lev: They show how they achieve this by demonstrating traveling-wave phase modulators with an electro-optic bandwidth beyond fifty gigahertz, and push–pull amplitude modulators that get a half wave voltage length product of four hundred fifty millivolts per centimeter.

Kai: The paper also details the passive elements, showing low loss single mode waveguides with a propagation loss of two point nine plus or minus zero point two decibels per centimeter and beam splitters for multimode interference.

Mira: They also present how they use ring resonators to measure the photorefractive response of this platform, noting that photorefraction is observed by measuring resonance shifts.

Lev: The results show a two point nine plus or minus zero point two decibel per centimeter propagation loss in the ring resonators and they quantify that response using the formula delta nu equals delta nu sat divided by one plus i saturation.

Kai: So, it’s not just about the components working; it’s about showing how these parts form a multichannel control architecture, even if they aren't directly controlling ions in this demonstration.

Mira: The implication is that this platform provides the necessary building blocks for realizing trapped-ion systems where gigahertz-scale electro-optic control is required at a blue ion wavelength.

Lev: But they also clearly identify the challenges that remain before you can actually integrate these devices for real ion control, specifically photorefraction and substrate uniformity issues.

Conclusion: Kai: The paper "Thin-film lithium niobate integrated photonics at four hundred ninety-three nm" is focused on proving that visible and near ultraviolet light can be controlled quickly using thin-film lithium niobate technology <ref:2611.14474#pg1,Thin-film lithium niobate integrated photonics at 493 nm>.

Mira: It shows the practical integration of passive and active components, including phase modulators with over fifty gigahertz bandwidth and amplitude modulators with a voltage length product of four hundred fifty millivolts per centimeter.

Lev: The authors are setting up this platform as the building blocks for a multichannel control architecture, which is essential for achieving the gigahertz-scale agility needed for resolving hyperfine structure in trapped ions.

Kai: So what this means simply is that they've shown a way to make fast optical modulation at four hundred ninety three nanometers on lithium niobate thin films.

Mira: It’s about showing how these integrated components are the necessary groundwork for making scalable trapped-ion systems work in the visible spectrum, provided they can solve the remaining issues with uniformity and photorefraction.

Lev: The authors specifically flag that they still need to characterize photorefractive effects over a wider range of input optical powers and wavelengths before real ion integration is feasible.

Nicholas Achuthan, ‡Letícia Magalhตes, →Xudong Li, →Hugo Voncken, ↔Hana Warner, ↔Sophie Ding, ↔Andrea Cordaro, ↔Xinrui Zhu, Keith Powell 3§, ↔Anna Shelton, Dylan Renaud→Daniel Assumpcao§, Xiangying Zuo, Michael Pushkarsky4↔Amirhassan Shams-Ansari4§, and Marko Lonพčar1***

John A. Paulson School of Engineering and Applied Sciences at Harvard University · Faculty of Applied Sciences at Delft University of Technology · Lumina Corp · Monarch Quantum

physics.optics

Submitted: 2026-11-10

Updated: 2026-11-10

The gist: Visible and near-ultraviolet light underpins applications from biophotonics to quantum computing, which demand fast control of optical amplitude and phase The authors demonstrate a thin-film lithium…

Key concepts

Thin-Film Lithium Niobate (TFLN)
TFLN is a material used in integrated photonics that allows for efficient light manipulation at specific wavelengths, like 493 nm. The authors fabricated this material on wafer scale to create a platform with various optical components, including waveguides and modulators, enabling complex light control.
Traveling-Wave Phase Modulator
This active component controls the phase of light using an electro-optic effect. It was designed to operate at a high speed, achieving an electro-optic bandwidth over 50 GHz. This fast control is essential for applications like atomic systems where rapid modulation is needed.
Grating Couplers
Grating couplers are structures that efficiently couple light from free space into the integrated optical waveguide. The authors optimized these couplers for a specific pitch and duty cycle, achieving a peak efficiency of -4.8 dB, which helps in connecting external lasers to the on-chip components.
Photorefractive Response
This is an effect where light changes the refractive index of the material due to charge trapping within the lithium niobate film. The authors quantified this response using ring resonators, showing a propagation loss of 2.9 ± 0.2 dB/cm and describing how resonance shifts indicate this effect.

Terminology

Summary

Visible and near-ultraviolet light underpins applications from biophotonics to quantum computing, which demand fast control of optical amplitude and phase The authors demonstrate a thin-film lithium niobate platform at 493 nm integrating grating couplers, beamsplitters, ring resonators, and modulators Segmented traveling-wave modulators achieve a halfwave voltage–length product of 450 mV·cm, >20 dB extinction, and bandwidth beyond 50 GHz

Platform Components and Architecture

The paper develops a library of passive and active TFLN components operating at 493 nm fabricated at the wafer scale on X-cut thin films The envisioned architecture involves a laser coupled to a TFLN PIC containing phase modulators, amplitude modulators, input/output couplers, and beam splitters The passive platform includes single-mode waveguides with a propagation loss of 2.9±0.2 dB/cm and low-loss multimode-interference (MMI) beamsplitters Grating couplers reach a peak efficiency of −4. p. 38 dB for an optimized pitch of 274 nm and duty cycle of 55%

Active Modulation Performance

The active components demonstrate high-bandwidth electro-optic control necessary for atomic systems Traveling-wave phase modulators achieve an electro-optic bandwidth exceeding 50 GHz, limited by the available RF source Push–pull amplitude modulators reach a half-wave voltage-length product of 450 mV·cm and an extinction ratio of 20.4 dB The output spectrum of the push-pull Mach–Zehnder amplitude modulator can be understood as the coherent recombination of fields that undergo equal and opposite phase modulation in its two arms

Characterization and Limitations

The platform's performance is characterized through various measurements, including ring resonators to quantify the photorefractive response Ring resonators show 2.9 ± 0.2 dB/cm propagation loss and quantify the platform’s photorefractive response Photorefraction is observed in ring resonators by measuring resonance shifts, with a steady-state form of the response described by ∆ν = ∆νsat I/(I + Isat) Key challenges remaining include photorefraction and substrate uniformity to scaling

Future Directions and Material Considerations

The work is motivated by efforts towards realizing scalable trapped-ion systems, where gigahertz-scale electro-optic control can be realized on an integrated platform at a blue ion wavelength Future work should focus on characterizing photorefractive effects over a larger range of input optical powers and wavelengths Material development toward more stoichiometric, damage-resistant thin films would directly benefit visible operation Thickness uniformity is crucial, as wafer-scale variations in thickness can shift nominally identical devices far from their design targets Packaging remains a hurdle due to the small mode sizes of visible waveguides making fiber coupling highly sensitive to misalignment

Funding and Disclosures

The research received funding from several sources including DRS Daylight Solutions and Monarch Quantum, Inc., Capes-Fulbright and Behring foundation fellowships, NSF ERC Center for Quantum Networks EEC-1941583, Rubicon postdoctoral fellowship from the Dutch Research Council, Gordon and Betty Moore Foundation, and NSF GRFP No. DGE1745303 M.L., D.R., and H.W. are involved in commercializing TFLN technologies at HyperLight Corporation M. p. 0L. and K.P. are involved in commercializing TFLT technologies at Lumina Corporation A. p. 0S-A and M.P.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI systems can implement fast control over optical amplitude and phase for visible-wavelength light, which is essential for applications like quantum control of trapped ions and neutral atoms. This is achieved by using thin-film lithium niobate platforms at 493 nm that integrate segmented traveling-wave modulators capable of gigahertz-scale agility.

  2. Improved AI systems can realize agile visible beam delivery for trapped-ion systems by utilizing the demonstrated segmenting traveling-wave modulators with a halfwave voltage length product of 450 mV cm and bandwidth beyond 50 GHz. This allows for addressing multiple ions with independently programmable optical waveforms from a single laser source.

  3. Improved AI systems can incorporate ring resonators into the architecture to quantify the platform's photorefractive response, which is critical for understanding limitations before full integration with trapped-ion systems. This allows the AI to predict and mitigate challenges related to photorefraction and substrate uniformity in scaled architectures.

Sources

Related papers