Tidal potential measured with distant optical clocks

arXiv:2611.14293 · physics.optics, physics.geo-ph · Submitted 2026-11-10 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "Tidal potential measured with distant optical clocks".

Paper summary: Mira: So, we're looking at the paper "Tidal potential measured with distant optical clocks," and the thesis here is that by comparing two optical clocks separated by a significant distance, you can sense tidal changes in the gravitational potential.

Kai: It’s about using strontium and ytterbium clocks to measure these changes over time.

Kai: The authors claim they successfully measured the combined solid Earth and ocean-loading tide and managed to separate the principal lunar semidiurnal contribution, M2, from a solar frequency contribution, S2.

Mira: The real significance is in how they tackle the overlap between these tidal components using their specific measurement technique.

Lev: What makes this matter for hardware? It shows that you can achieve this level of separation and quantification using optical clocks over a long baseline, which is something we’re trying to build for real systems.

Kai: It gives us a benchmark for how sensitive these clock systems are to geophysical noise.

Mira: The paper focuses heavily on the signal-to-noise modeling they built, which uses the actual sampling data to guide the precision of each component.

Lev: They used this model to estimate that the lunar response was zero point nine five plus or minus zero point eleven, with a signal-to-noise ratio of seven point zero two.

Kai: That ratio is important because it tells us how much confidence we should have in the measurement for that specific lunar component.

Mira: And they also looked at how extending the offset interval affects the uncertainty for other tidal groups, like K1, where increasing it from twelve hours to twenty-four hours cut that uncertainty down significantly.

Lev: It suggests that optimizing your observation window is a crucial part of getting usable data out of this kind of measurement setup.

Kai: So, they’re not just measuring; they’re modeling the noise and the sampling strategy together to get meaningful results.

Mira: And this whole effort extends demonstrated subcentimetre-equivalent clock performance to time-varying geophysical signals.

Lev: That means we can potentially use these clocks for more than just timekeeping; they become sensors for gravity as well.

Conclusion: Kai: So, looking at "Tidal potential measured with distant optical clocks," the authors are essentially proving that you can use these optical clock networks to measure tidal potentials across a baseline of about six hundred ninety-two kilometers.

Mira: The paper highlights their success in separating the lunar and solar semidiurnal contributions, which is a tricky bit because they overlap.

Lev: The implication for me, as someone building error correction systems, is that understanding this noise model helps us figure out where the real hardware limitations are landing when we try to run these kinds of long-term experiments.

Kai: It gives us a concrete way to test the robustness of our assumptions about how noise couples between components.

Mira: They show that by using a signal-to-noise model that incorporates actual sampling, you can guide future clock network observations toward better precision, suggesting longer uninterrupted records and covering complete diurnal cycles are helpful.

Lev: So the takeaway for us is that the methodology itself offers guidance on how to improve the physics experiments we plan to do with these clocks.

Kai: It confirms that even with these complex tidal interactions, subcentimetre-equivalent clock performance is achievable when you look at time-varying geophysical signals like this.

Mira: This work opens up a new way of thinking about what optical clocks can sense in their environment.

Lei Hou, *Xiang Zhang, *Qiang Zhu, *Xiang-Pei Liu, *Fa-Xi Chen, *Wen-Xuan Song*, Zhuan-Xian Xiong, Jian-Yu Guan, Yu-Chen Zhang, De-Quan Kong, Jia-Hao Zhang, Long-Fei Liao, Shao-Mao Wang, Bing Wang, *De-Zhi Xiong*, *Xing-Yang Cui*, *Ping Xu*, *Peng Liu*, Jie Li, Xiao Jiang, Hua-Qing Zhang, Ling-Xiang He, Li-Bo Li, Qi Shen, Youchao Xie, Lei Wang, Sheng-Kai Liao, Juan Yin, Cheng-Zhi Peng, Wen-Bin Shen

Hefei National Laboratory at the University of Science and Technology of China · *Shanghai Research Center for Quantum Sciences and CAS Center for Excellence in Quantum Information and Quantum Physics at the University of Science and Technology of China, Shanghai · Hefei National Research Center for Physical Sciences at the Microscale School of Physical Sciences at the University of Science and Technology of China, Hefei · Innovation Academy for Precision Measurement Science and Technology at the Chinese Academy of Sciences, Wuhan · Jinan Institute of Quantum Technology and CAS Center for Excellence in Quantum Information and Quantum Physics at the University of Science and Technology of China, Jinan · Time and Frequency Geodesy Center at Wuhan University

physics.optics, physics.geo-ph

Submitted: 2026-11-10

Updated: 2026-11-11

Importance score: 82/100

The gist: Fibre-linked optical clocks sense tidal changes of the gravitational potential, but separating overlapping tidal components and quantifying their precision remain challenging Using strontium and…

Key concepts

Fibre-linked Optical Clocks
These are highly precise clocks using light to measure time, connected by a fibre link over long distances (692 km). They are sensitive enough to detect tiny changes in the gravitational potential caused by tides, allowing scientists to measure geophysical signals with high accuracy.
Tidal Component Separation
The study separated the overall tide into different frequencies. They identified and isolated the lunar semidiurnal tide (M2) from the solar semidiurnal tide (S2) by grouping them with other tidal patterns, helping to distinguish between signals caused by the Moon and those caused by Earth's rotation.
Signal-to-Noise Model
This mathematical model combines signal strength, noise, and actual clock sampling methods. It was used to estimate the precision of the lunar tide measurement (0.95 ± 0.11) and suggested improvements for future observations by showing how better stability and longer records reduce uncertainty.

Terminology

Summary

Fibre-linked optical clocks sense tidal changes of the gravitational potential, but separating overlapping tidal components and quantifying their precision remain challenging Using strontium and ytterbium clocks 692 km apart, we measure over 353 days a response of 0. p. 095 ± 0.11 to the combined solid-Earth and ocean-loading tide and 1. p. 001 ± 0.13 for the lunar semidiurnal group, and separate the lunar and solar-frequency semidiurnal contributions A signal-to-noise model based on the actual sampling accounts for the lunar precision and guides future clock-network observations

Measurement Setup and Methodology

The study measured tidal changes in the potential difference between a strontium clock in coastal Shanghai and an ytterbium clock in inland Wuhan, located 692 km apart and connected by a 1,350-km fibre link Over 545.9 hours of observations spanning 353 days, the researchers measured the combined solid-Earth and ocean-loading tide and separated the principal lunar semidiurnal contribution (M2) from the contribution at the principal solar semidiurnal frequency (S2) The analysis involved five campaigns and 54 observing segments over 353 days. p. 0

Tidal Component Separation

The researchers separated the semidiurnal contributions by grouping M2 with the larger lunar elliptic semidiurnal tide, N2, and S2 with the lunisolar semidiurnal tide, K2 The lunar-group response was found to be 1.01 ± 0.13 The two-month summer campaign covered the full relative-phase cycle, allowing the researchers to distinguish between the lunar and solar semidiurnal periods, which have periods of approximately 12. p. 142 h and 12 h respectively

Signal-to-Noise Modeling

A signal-to-noise model was developed that combines signal strength, noise, and actual sampling to account for most of the differences in precision between components The model estimated the lunar response as 0.95 ± 0.11, where A = 1 denotes agreement with the predicted change in frequency ratio The signal-to-noise ratio for the lunar component was found to be 7. p. 102, compared to a model estimated value of 7. p. 217

Precision Quantification and Future Guidance

The authors developed a signal-to-noise model that connects signal strength and noise to estimator precision through the actual sampling window, fitted offsets, and coupling between components The model identified distinct ways to improve future observations, suggesting that better clock stability lowers the noise and longer uninterrupted records reduce the loss of slowly varying signals to fitted offsets Covering complete diurnal cycles and increasing exposure would help identify weaker potential changes after subtracting the tidal background The measurement and separation of the lunar and solar-frequency semidiurnal contributions extend demonstrated subcentimetre-equivalent clock performance to time-varying geophysical signals

Validation and Diagnostics

The analysis used a filtered validation method, where time is reconstructed from the first timestamp and sample index, followed by 10-Hz rejection The signal-to-noise model agrees well with the measured value for the lunar component, whereas agreement is poorer for weaker components Sampling aliasing was tested by reciprocal subtraction, showing that both contributions remain identifiable The maximum canonical correlation between the projected M2 and S2 pairs was 0.290 The analysis also constrained the precision cost of segment offsets, showing that extending the offset interval from 12 to 24 h reduces the phase-averaged uncertainty for K1 from 2. p. 3292 × 10−18 to 1. p. 9

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI systems can accurately separate overlapping tidal components by using a signal-to-noise model that accounts for most of the differences in precision between components and provides a quantitative guide for future observations.

  2. The improved system can distinguish between lunar and solar frequency semidiurnal contributions by fitting the data as y(t) = cj + A s(t), where s(t) is the predicted tidal change in fractional frequency, A is the response and the offset cj of observing segment j absorbs the static part.

  3. The system can quantify component precision by developing a signal-to-noise model that connects signal strength and noise to estimator precision through the actual sampling window, the fitted offsets and the coupling between components.

Sources

Related papers