Search for Higgs boson production in association with another Higgs or an exotic scalar boson in the b b barW+W- single lepton final state at sqrt s =13 TeV with the ATLAS experiment

arXiv:2611.08241 · hep-ex · Submitted 2026-11-05 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Experiment. The day in high-energy experiment: detectors, searches and limits.

Kai: We're looking at the paper: "Search for Higgs boson production in association with another Higgs or an exotic scalar boson in the b b barW+W- single lepton final state at sqrt s =13 TeV with the ATLAS experiment".

Mira: Here's the gist of the paper. Search for Higgs boson pair production where one Higgs boson decays via H to b b bar and the other Higgs boson decays via H to W* to nu q q bar (= e, mu).

Kai: This search uses the complete Run 2 data sample recorded by the ATLAS detector at the LHC from 2015 to 2018 at a centre-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 140 fb-1.

Mira: The analysis looks for non-resonant Higgs boson pair production assuming Standard Model dynamics.

Kai: No evidence for Higgs-boson pair production is observed and an upper limit at 95% confidence level is set at 35 times the Standard Model prediction.

Title and authors: Kai: So, to start, let's look at what this paper is about in its title: "Search for Higgs boson production in association with another Higgs or an exotic scalar boson in the b b barW+W- single lepton final state at sqrt s = thirteen TeV with the ATLAS experiment" <ref:2611.08241#pg1,Search for Higgs boson production in association with another Higgs or an>. It basically lays out the specific search channel they ran.

Mira: I think what it means is they are looking for two ways to get that signal: either a standard Higgs pair production, or something new where you have an exotic scalar X and a standard Higgs H colliding to make this final state.

Lev: The title tells us the exact process they are targeting: the b b W bar W- single lepton final state at thirteen TeV <ref:2611.08241#pg1,single lepton final state at>. It's very specific, which is good for setting limits, but it also means they are looking for a very rare event if it's not the standard model.

Kai: The implication is that if we don't see anything, we can put constraints on new physics models that predict these heavy scalars X and S. It’s about testing those theories against real data.

Mira: And the authors are using a very specific set of criteria, which usually means they are trying to be as sensitive as possible to this particular signature.

Lev: They are also exploring combinations of masses for X and S, specifically with m X in the range three hundred fifty to three thousand GeV and m S between one hundred seventy and two thousand five hundred GeV. That's a wide range to cover.

Kai: So, they’re not just looking for one specific particle; they are mapping out where these new heavy particles might hide in the mass spectrum, which is how you constrain their possible existence.

The paper's summary: Kai: Now, let's break down the summary of this paper. It says they looked for two things: non-resonant Higgs boson pair production and resonant production through X to SH and S to W+W-.

Mira: Essentially, the first part is testing if we can even see regular Higgs pair production in this decay mode without new physics interfering. The second part is hunting for that specific chain involving the heavy scalars X and S.

Lev: The summary clarifies the assumptions they make about these new particles. They assume that both S and X have a narrow width, around ten MeV. That's a big assumption you have to make when you're not directly measuring the particle itself.

Kai: And there’s a crucial setup detail: they choose the sum of the masses of S and H to be smaller than the mass of X. This is important because it ensures that both S and H can be produced on-shell without being suppressed by some kinematic reason.

Mira: That condition sets up a specific region where they expect to see these resonant production signals if those new particles exist. It’s a way to maximize the probability of seeing the signal.

Lev: And remember, they explicitly state that they are neglecting the standard model Higgs pair production in their background processes for both searches. That means any excess they find is supposed to be from those new physics scenarios, not just some weird SM fluctuation.

The paper's improvements: Kai: The paper points out several improvements they made compared to previous work, especially concerning the selection and discrimination of the signals.

Mira: They introduced neural networks that are trained on forty input variables to output probabilities for four different processes: Higgs pair, X and S, top-top pairs, and W plus jets. This is a big step in how they separate the signal from everything else.

Lev: That’s the signal region definition you mentioned earlier; using those discriminant variables like dHH or dSHi to define mutually exclusive regions. It makes the selection much more powerful than just looking at simple cuts on a few kinematic variables.

Kai: They also improved background rejection using another neural network that exploits correlations between observables, like the azimuthal angle of two light jets with the highest transverse momentum and the lepton's phi.

Mira: That’s smart because it means they aren't just looking at individual particles; they are looking at how different parts of the event are connected, which helps them distinguish signal from backgrounds more effectively.

Lev: They also used maximum-likelihood fits across six background control regions plus four signal regions to get precise upper limits on the cross-section times branching fraction for various scalar masses m X and m S. That’s how you get the tightest constraints on new physics parameters.

Conclusion: Kai: To wrap up, this paper presents some very strong results. For non-resonant Higgs pair production, they found an upper limit on the cross-section ratio of thirty-five times the standard model prediction, and they didn't find any excess over that prediction <ref:2611.08241#pg1,35 times the standard model prediction>.

Mira: And for the resonant searches involving X and S, they also found no statistically significant discrepancy in any of their signal regions. They set exclusion limits on the production cross-section multiplied by branching fraction for various mass hypotheses.

Lev: The main implication is that they've tightened the constraints on these hypothetical heavy scalars, which helps prune the parameter space for theories predicting them.

Kai: Before we go, I want to mention one thing about their method: they incorporated various systematic uncertainties as nuisance parameters in their likelihood fit, including modeling uncertainties for top-top pairs and W plus jets.

Mira: And they quantified that total systematic uncertainty budget, which is eighty-four percent for the non-resonant Higgs pair production hypothesis. That gives you a good idea of how much confidence you should have in those limits.

Lev: From my side, it shows that if we were to run this on real hardware, the overhead from implementing these kinds of complex analyses would be substantial, but it’s what we need for precision measurements.

Kai: So, this paper on "Search for Higgs boson production in association with another Higgs or an exotic scalar boson in the b b barW+W- single lepton final state at sqrt s = thirteen TeV with the ATLAS experiment" gives us solid constraints on these new particles using high luminosity data <ref:2611.08241#pg1,Search for Higgs boson production in association with another Higgs or an>.

Mira: It’s a good piece of work for testing both standard model expectations and searching for physics beyond the standard model in this specific decay channel.

Lev: We'll keep an eye on how these constraints evolve as we get more data, because that’s where the real power is in narrowing down those mass ranges you talked about.

The ATLAS Collaboration

EUROPEAN ORGANISATION FOR NUCLEAR RESEARCH (CERN)

hep-ex

Submitted: 2026-11-05

Updated: 2026-11-05

Comments: 51 pages in total, authorlist starting page 34, 13 figures, 3 tables, submitted to JHEP. All figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/HIGP-2024-30

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 83/100

The gist: Search for Higgs boson pair production where one Higgs boson decays via H to b b bar and the other Higgs boson decays via H to W* to nu q q bar (= e, mu).

Key concepts

Non-resonant Higgs pair production
This searches for two Higgs bosons produced directly in a way that doesn't involve a specific intermediate resonance. The analysis looks for the signal where one Higgs decays into bottom quarks ($bar{b}$) and the other decays into a leptonic W boson decay, using kinematic variables to distinguish this from background processes like top quark pairs.
Resonant production of X to SH
This searches for exotic physics where two heavy, hypothetical particles (X and S) are produced, one decaying into the Higgs (H) and the other decaying into a W boson pair ($W^+W^-$). The search sets limits on the production rate of these heavy scalars based on their assumed masses.
Higgsness and Topness variables
These are kinematic measurements used to separate different types of events. Higgsness specifically helps distinguish between the signal process (like $HH$) and backgrounds like top quark pairs ($tar{t}$), while Topness is another variable used in this discrimination.
Neural Networks for Classification
The analysis uses sophisticated machine learning models, specifically neural networks trained on many input variables. These networks help the detector distinguish between the desired signal (like $HH$ or $SH$) and various backgrounds ($tar{t}$, $W+$jets) by exploiting complex correlations among the measured physical observables.

Terminology

Summary

Search for Higgs boson pair production where one Higgs boson decays via H to b b bar and the other Higgs boson decays via H to W* to nu q q bar (= e, mu). p. 0

Where the paper says it

EUROPEAN ORGANISATION FOR NUCLEAR RESEARCH (CERN) Submitted to: JHEP CERN-EP-2026-255 6th November 2026 Search for Higgs boson production in association with another Higgs or an exotic scalar boson in the 𝒃𝒃𝑾¯ +𝑾 − single lepton final state at √ 𝒔 = 13 TeV with the ATLAS experiment The ATLAS Collaboration A search for Higgs boson pair production where one Higgs boson decays via 𝐻 → 𝑏𝑏¯ and the other Higgs boson decays via 𝐻 → 𝑊𝑊∗ → ℓ𝜈𝑞𝑞¯ (ℓ = 𝑒, 𝜇) is presented. This search uses the complete Run 2 data sample recorded by the ATLAS detector at the LHC from 2015 to 2018 at a centre-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 140 fb−1 .

This search uses the complete Run 2 data sample recorded by the ATLAS detector at the LHC from 2015 to 2018 at a centre-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 140 fb-1. p. 0
Where the paper says it

EUROPEAN ORGANISATION FOR NUCLEAR RESEARCH (CERN) Submitted to: JHEP CERN-EP-2026-255 6th November 2026 Search for Higgs boson production in association with another Higgs or an exotic scalar boson in the 𝒃𝒃𝑾¯ +𝑾 − single lepton final state at √ 𝒔 = 13 TeV with the ATLAS experiment The ATLAS Collaboration A search for Higgs boson pair production where one Higgs boson decays via 𝐻 → 𝑏𝑏¯ and the other Higgs boson decays via 𝐻 → 𝑊𝑊∗ → ℓ𝜈𝑞𝑞¯ (ℓ = 𝑒, 𝜇) is presented. This search uses the complete Run 2 data sample recorded by the ATLAS detector at the LHC from 2015 to 2018 at a centre-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 140 fb−1 .

The analysis looks for non-resonant Higgs boson pair production assuming Standard Model dynamics. p. 0
Where the paper says it

This search uses the complete Run 2 data sample recorded by the ATLAS detector at the LHC from 2015 to 2018 at a centre-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 140 fb−1 . The analysis looks for non-resonant Higgs boson pair production assuming Standard Model dynamics.

No evidence for Higgs-boson pair production is observed and an upper limit at 95% confidence level is set at 35 times the Standard Model prediction. p. 0
Where the paper says it

The analysis looks for non-resonant Higgs boson pair production assuming Standard Model dynamics. No evidence for Higgs-boson pair production is observed and an upper limit at 95% confidence level is set at 35 times the Standard Model prediction.

The same selection is used to target Beyond the Standard Model theories predicting the resonant production of the heavy scalars, X and S, with m X > m S > m H, undergoing the process X to SH, S to W+W-, and H to b b bar. p. 0

Where the paper says it

No evidence for Higgs-boson pair production is observed and an upper limit at 95% confidence level is set at 35 times the Standard Model prediction. The same selection is used to target Beyond the Standard Model theories predicting the resonant production of the heavy scalars, 𝑋 and 𝑆, with 𝑚𝑋 > 𝑚𝑆 > 𝑚𝐻 , undergoing the process 𝑋 → 𝑆𝐻, 𝑆 → 𝑊 +𝑊 − , 𝐻 → 𝑏𝑏¯.

Limits are set on the resonant production of X to SH for several combinations of the two scalar’s masses within the m X mass range 350 − 3000 GeV and m S mass range 170 − 2500 GeV. p. 0
Where the paper says it

The same selection is used to target Beyond the Standard Model theories predicting the resonant production of the heavy scalars, 𝑋 and 𝑆, with 𝑚𝑋 > 𝑚𝑆 > 𝑚𝐻 , undergoing the process 𝑋 → 𝑆𝐻, 𝑆 → 𝑊 +𝑊 − , 𝐻 → 𝑏𝑏¯. Limits are set on the resonant 𝑋 → 𝑆𝐻 production for several combinations of the two scalar’s masses within the 𝑚𝑋 mass range 350 − 3000 GeV and 𝑚𝑆 mass range 170 − 2500 GeV.

The analysis focuses on the single-lepton channel, requiring exactly two distinct b-jets from the H to b b bar decay in the signal case. p. 2

Where the paper says it

The analysis requires two distinct 𝑏-jets, emerging from the 𝐻 → 𝑏𝑏¯ decay in the signal case. This “resolved” analysis explicitly excludes events where this decay is reconstructed as a wide single jet with radius 𝑅 = 1.

The analysis explores both non-resonant Higgs-boson pair production in the H to bb W barW decay channel and resonant production through the chain pp to X to SH to W+W- b b bar. p. 1
Where the paper says it

Given the low expected yield for SM 𝐻𝐻 non-resonant production, it is of great importance to understand the sensitivity for the observation of the Higgs boson pair production in all possible decay channels, including 𝑏𝑏𝑊𝑊 ¯ ∗ , which could give a valuable contribution when combined with the most sensitive channels and will improve projections for future high-luminosity and high-energy 𝑝 𝑝 colliders. The 𝑏𝑏𝑊𝑊 ¯ ∗ channel, while having the second highest branching fraction after the 4𝑏 final state, is challenging due to the large background from top-quark pair production (𝑡𝑡¯), which features the same final state.

The heavy scalars, S and X, are assumed to have a narrow width (10 MeV). p. 2
Where the paper says it

In addition, resonant production through the chain 𝑝 𝑝 → 𝑋 → 𝑆𝐻 → 𝑊 +𝑊 − 𝑏𝑏¯ is explored. The heavy scalars, 𝑆 and 𝑋, are assumed to have a narrow width (10 MeV).

The sum of the masses of the S scalar and the Higgs boson is chosen to be smaller than the mass of X to have a non-suppressed, on-shell S and H production. p. 2
Where the paper says it

The heavy scalars, 𝑆 and 𝑋, are assumed to have a narrow width (10 MeV). The sum of the masses of the 𝑆 scalar and the Higgs boson is chosen to be smaller than the mass of 𝑋 to have a non-suppressed, on-shell 𝑆 and 𝐻 production.

In both searches, SM HH production is neglected and not included among the background processes. p. 2
Where the paper says it

The sum of the masses of the 𝑆 scalar and the Higgs boson is chosen to be smaller than the mass of 𝑋 to have a non-suppressed, on-shell 𝑆 and 𝐻 production. In both searches the SM 𝐻𝐻 production is neglected and not included among the background processes.

The analysis utilizes data recorded by the ATLAS detector at sqrt s = 13 TeV with an integrated luminosity of 140 fb-1. p. 0

Where the paper says it

This search uses the complete Run 2 data sample recorded by the ATLAS detector at the LHC from 2015 to 2018 at a centre-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 140 fb−1 . The analysis looks for non-resonant Higgs boson pair production assuming Standard Model dynamics.

The event selection requires exactly two b-tagged jets, which form the Higgs boson candidate, and at least two light jets from the hadronic W boson decay. p. 7
Where the paper says it

Events are required to have exactly two 𝑏-tagged jets, which form the Higgs boson candidate, and at least two light jets. If an event contains a reconstructed hadronic 𝜏-lepton candidate (𝜏had-vis, as defined in Section 4), it is not included in the analysis, thereby removing the overlap with 𝐻𝐻, 𝑆𝐻 analyses with a 𝜏𝜏 pair in the final state [114, 115].

Kinematic variables such as Higgsness (H) and Topness (T) are constructed to discriminate between the t t bar and HH processes. p. 7
Where the paper says it

This feature is exploited in two ways: using kinematic variables and using a kinematic fit. Two variables are constructed, called Higgsness (𝐻) and Topness (𝑇), as originally proposed in Ref.

Neural Networks are employed with a multi-output classifier trained against the HH and SH signals and three main background contributions: t t bar, W+ jets, and single-top. p. 6
Where the paper says it

Hadronically decaying 𝜏-leptons (𝜏had-vis) are used to remove events that overlap with the analysis targeting 𝑏𝑏𝜏¯ + 𝜏 − final state, their reconstruction is detailed in Ref. A recurrent neural network (RNN) classifier is used to identify the visible decay products of hadronic 𝜏-lepton decays as described in Ref.

The results show that no significant excess of events over the background expectation is found in any of the SH SRs. p. 2
Where the paper says it

In both searches the SM 𝐻𝐻 production is neglected and not included among the background processes. The ATLAS and CMS collaborations have published search results for non-resonant 𝐻𝐻 production in several decay channels using the complete data sample collected during LHC Run 2 (from 2015 to 2018) [14–28] and using partial data sample collected during LHC Run 3 (from 2022 to 2024) [29–33].

The observed (expected) limit on the non-resonant Higgs pair production cross-section ratio sigma HH / sigma SM is 35 (23+10-7), which corresponds to 35 times the SM predicted cross-section, with no excess over the SM prediction found. p. 0
Where the paper says it

The analysis looks for non-resonant Higgs boson pair production assuming Standard Model dynamics. No evidence for Higgs-boson pair production is observed and an upper limit at 95% confidence level is set at 35 times the Standard Model prediction.

Exclusion limits on the resonant pp to X to SH production cross-section multiplied by the branching fraction are set for several m X and m S hypotheses. p. 0
Where the paper says it

The same selection is used to target Beyond the Standard Model theories predicting the resonant production of the heavy scalars, 𝑋 and 𝑆, with 𝑚𝑋 > 𝑚𝑆 > 𝑚𝐻 , undergoing the process 𝑋 → 𝑆𝐻, 𝑆 → 𝑊 +𝑊 − , 𝐻 → 𝑏𝑏¯. Limits are set on the resonant 𝑋 → 𝑆𝐻 production for several combinations of the two scalar’s masses within the 𝑚𝑋 mass range 350 − 3000 GeV and 𝑚𝑆 mass range 170 − 2500 GeV.

Systematic uncertainties play an important role, yet the results show a large improvement over previous ATLAS results in the same HH decay channel: the limits on non-resonant HH production are stronger by a factor of 13. p. 2
Where the paper says it

In both searches the SM 𝐻𝐻 production is neglected and not included among the background processes. The ATLAS and CMS collaborations have published search results for non-resonant 𝐻𝐻 production in several decay channels using the complete data sample collected during LHC Run 2 (from 2015 to 2018) [14–28] and using partial data sample collected during LHC Run 3 (from 2022 to 2024) [29–33].

Furthermore, this work provides a new result on the resonant pp to X to SH, never investigated so far in the b b barW+W- 1-lepton decay channel. p. 1
Where the paper says it

The 𝑏𝑏𝑊𝑊 ¯ ∗ channel, while having the second highest branching fraction after the 4𝑏 final state, is challenging due to the large background from top-quark pair production (𝑡𝑡¯), which features the same final state. Furthermore, this final state is especially important for searches for a combined production of the Higgs boson with a new Higgs-like heavy scalar resonance, 𝑆, which is expected to have a branching 2

The expected and observed upper limit at 95% CL on the non-resonant Higgs pair production cross-section ratio sigma HH / sigma SM is < 268 (178+78-54) fb. p. 0
Where the paper says it

The analysis looks for non-resonant Higgs boson pair production assuming Standard Model dynamics. No evidence for Higgs-boson pair production is observed and an upper limit at 95% confidence level is set at 35 times the Standard Model prediction.

The branching fraction B(HH to b b barW W-) = 2 times B(H to b b bar) times B(H to WW*) = 0. p. 1
Where the paper says it

Given the low expected yield for SM 𝐻𝐻 non-resonant production, it is of great importance to understand the sensitivity for the observation of the Higgs boson pair production in all possible decay channels, including 𝑏𝑏𝑊𝑊 ¯ ∗ , which could give a valuable contribution when combined with the most sensitive channels and will improve projections for future high-luminosity and high-energy 𝑝 𝑝 colliders. The 𝑏𝑏𝑊𝑊 ¯ ∗ channel, while having the second highest branching fraction after the 4𝑏 final state, is challenging due to the large background from top-quark pair production (𝑡𝑡¯), which features the same final state.

249 is used to obtain the following observed (expected) limit on the ggF HH production cross-section at 95% CL: sigma(pp to HH) < 1. p. 2
Where the paper says it

Previous measurements in the 𝐻𝐻 → 𝑏𝑏𝑊¯ +𝑊 − → 𝑏𝑏ℓ𝜈𝑞 ¯ 𝑞¯ ′ channel were performed by both ATLAS and CMS collaborations with the Run 2 data samples [27, 37, 38]. The ATLAS analysis used a data sample of 36 fb−1 reaching an upper limit of 300 times the SM expected cross-section at 95% confidence level (CL).

08 (0.72+0.31-0.22) pb, which corresponds to 35 (23+10-7) times the SM predicted cross-section, with no excess over the SM prediction found. p. 2
Where the paper says it

Previous measurements in the 𝐻𝐻 → 𝑏𝑏𝑊¯ +𝑊 − → 𝑏𝑏ℓ𝜈𝑞 ¯ 𝑞¯ ′ channel were performed by both ATLAS and CMS collaborations with the Run 2 data samples [27, 37, 38]. The ATLAS analysis used a data sample of 36 fb−1 reaching an upper limit of 300 times the SM expected cross-section at 95% confidence level (CL).

The statistical uncertainty is 54 fb and the total systematic uncertainty is 84 fb for the non-resonant HH signal hypothesis. p. 2
Where the paper says it

The ATLAS and CMS collaborations have published search results for non-resonant 𝐻𝐻 production in several decay channels using the complete data sample collected during LHC Run 2 (from 2015 to 2018) [14–28] and using partial data sample collected during LHC Run 3 (from 2022 to 2024) [29–33]. Furthermore, the two collaborations have published statistical combinations of these double-Higgs boson search analyses [34–36], using integrated luminosities of up to 140 fb−1 .

Exclusion limits on the resonant pp to X to SH production cross-section multiplied by the branching fraction are determined for several m X and m S hypotheses. p. 0
Where the paper says it

The same selection is used to target Beyond the Standard Model theories predicting the resonant production of the heavy scalars, 𝑋 and 𝑆, with 𝑚𝑋 > 𝑚𝑆 > 𝑚𝐻 , undergoing the process 𝑋 → 𝑆𝐻, 𝑆 → 𝑊 +𝑊 − , 𝐻 → 𝑏𝑏¯. Limits are set on the resonant 𝑋 → 𝑆𝐻 production for several combinations of the two scalar’s masses within the 𝑚𝑋 mass range 350 − 3000 GeV and 𝑚𝑆 mass range 170 − 2500 GeV.

The expected and observed limits are shown in Figure 13 for each combination of the scalar masses. p. 0
Where the paper says it

The same selection is used to target Beyond the Standard Model theories predicting the resonant production of the heavy scalars, 𝑋 and 𝑆, with 𝑚𝑋 > 𝑚𝑆 > 𝑚𝐻 , undergoing the process 𝑋 → 𝑆𝐻, 𝑆 → 𝑊 +𝑊 − , 𝐻 → 𝑏𝑏¯. Limits are set on the resonant 𝑋 → 𝑆𝐻 production for several combinations of the two scalar’s masses within the 𝑚𝑋 mass range 350 − 3000 GeV and 𝑚𝑆 mass range 170 − 2500 GeV.

The results show good agreement of data with the MC expectation, and no statistically significant discrepancy from the SM prediction is observed in any of the SH SRs. p. 0
Where the paper says it

The analysis looks for non-resonant Higgs boson pair production assuming Standard Model dynamics. No evidence for Higgs-boson pair production is observed and an upper limit at 95% confidence level is set at 35 times the Standard Model prediction.

The final result shows a slight over-fluctuation of the observed upper limit on the signal cross-section. p. 2
Where the paper says it

The ATLAS analysis used a data sample of 36 fb−1 reaching an upper limit of 300 times the SM expected cross-section at 95% confidence level (CL). The CMS Collaboration combined analyses targeting the 𝑏𝑏𝑊¯ +𝑊 − channel using both the single-lepton and the dilepton final states, while a dilepton final-state analysis of data taken during Run 3 (in 2022 and 2023) was presented in Ref.

"

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Enhanced signal discrimination for Higgs boson pair production by using neural networks trained on 40 input variables to output probabilities for four processes (HH, SH, ttbar, W+jets). This allows the system to define mutually exclusive signal regions (SRs) and validation regions (VRs) based on the discriminant dHH or dSHi variables.

  2. Improved background rejection through a Neural Network that exploits different correlation patterns among observables like the azimuthal angle of two light jets with highest pT, the lepton's phi, and other kinematic variables. This system can distinguish between signal and backgrounds by exploiting these correlations as shown in Figure 4.

  3. Advanced statistical inference by performing maximum-likelihood fits for both non-resonant Higgs boson pair production and resonant X to SH production across six background control regions plus four signal regions. This yields precise upper limits on the cross-section times branching fraction for various scalar masses (mX, mS).

  4. Data-driven fake background estimation using the fake factor method to model prompt lepton contamination more accurately than purely simulation-based methods. This includes deriving fakes from data using expressions like Nfakes P = sum i F i x (NcRi - NpromptCRi) to estimate contamination in signal regions.

  5. Robust uncertainty quantification by incorporating various systematic uncertainties as nuisance parameters in the likelihood fit, including modeling uncertainties for ttbar, W+jets, and single-top processes. This allows the determination of impact on cross-section limits and provides a total systematic uncertainty budget (e.g., 84% for non-resonant HH).

Abstract

A search for Higgs boson pair production where one Higgs boson decays via H to b b bar and the other Higgs boson decays via H to WW* to νq q bar (=e,μ) is presented. This search uses the complete Run 2 data sample recorded by the ATLAS detector at the LHC from 2015 to 2018 at a centre-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 140 fb-1. The analysis looks for non-resonant Higgs boson pair production assuming Standard Model dynamics. No evidence for Higgs-boson pair production is observed and an upper limit at 95% confidence level is set at 35 times the Standard Model prediction. The same selection is used to target Beyond the Standard Model theories predicting the resonant production of the heavy scalars, X and S, with m X > m S > m H, undergoing the process X to SH, S to W+W-, H to b b bar. Limits are set on the resonant X to SH production for several combinations of the two scalar's masses within the m X mass range 350-3000 GeV and m S mass range 170-2500 GeV.

Sources

Related papers