Inline inter-core phase control in multi-core fiber with a commercial polarization controller

arXiv:2611.03304 · physics.optics, quant-ph · Submitted 2026-11-02 · Read on arXiv

physics.optics, quant-ph

Submitted: 2026-11-02

Updated: 2026-11-02

Comments: to appear in Journal of Optics

License: http://creativecommons.org/licenses/by/4.0/

The gist: Inter-core phase control is a prerequisite for interferometry in multi-core fiber (MCF), but no compact inline element for this purpose is presently available…

Terminology

Abstract

Inter-core phase control is a prerequisite for interferometry in multi-core fiber (MCF), but no compact inline element for this purpose is presently available, and existing approaches require fanout to single-mode fiber or free-space optics. We show that a commercial inline polarization controller, a low-loss and widely available component, can be operated as an inline inter-core phase shifter. Two-core interferometry on a jacketed four-core patchcord gives a reversible inter-core phase of 0.95 plus or minus 0.02 rad from a single device, with an operating-point-independent lower bound of 0.38 rad, driven through repeated load-unload cycles at a rate set by the actuator. A diametrically compressed disk model is used to predict the operating condition: with the input polarization aligned to a principal stress axis the device imparts a relative phase between cores without rotating the polarization state of either, which we verify by polarimetry on all four cores. The response is polarization dependent, falling to less than 0.58 rad for the orthogonal input. The result is a practical, inline route to inter-core phase control and stabilization in all-MCF interferometers, requiring neither fanout to single-mode fiber nor free-space optics.

Sources

Related papers