A photonic-integrated optomechanical mid-infrared detector

arXiv:2610.37771 · physics.optics, physics.app-ph · Submitted 2026-10-27 · Read on arXiv

physics.optics, physics.app-ph

Submitted: 2026-10-27

Updated: 2026-10-27

License: http://creativecommons.org/licenses/by/4.0/

The gist: Tracking the resonance frequency of a mechanical oscillator is the basis of atomic force microscopy, mass sensing and thermometry.

Abstract

Tracking the resonance frequency of a mechanical oscillator is the basis of atomic force microscopy, mass sensing and thermometry. Nanomechanical thermal detectors exploit this principle to sense absorbed radiation, most effectively with tensile-stressed resonators, whose tension converts thermal expansion into a large frequency shift and dilutes dissipation. Approaching their fundamental sensitivity limit, however, has required free-space or fibre-coupled interferometers, hindering compact deployment and scaling to arrays. Here we remove this bottleneck by monolithically integrating a high-Q nanomechanical resonator with a silicon nitride photonic integrated circuit. A tensile-stressed silicon nitride trampoline with an impedance-matched platinum absorber is dispersively coupled to a photonic integrated microresonator beneath it. At room temperature and with microwatt-level optical power, the detector reaches a noise-equivalent power of 3.4 pW/ sqrt Hz for broadband thermal radiation (3-12 μ m), referred to incident power. Referred to absorbed power, this is within a factor of 1.5 of its fundamental thermal fluctuation limit. Using our detector in a state-of-the-art commercial Fourier-transform infrared spectrometer, we resolve the vibrational fingerprint of a polymer film across 2-20 μ m and reach the precision of the built-in pyroelectric detector with about an order of magnitude lower incident power. This architecture opens a route to multiplexed optomechanical focal-plane arrays.

Related papers