Bidirectional schlieren imaging using dual-LED illumination and a lens aperture as a knife-edge
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Bidirectional schlieren imaging using dual-LED illumination and a lens aperture as a knife-edge".
Mira: Here's the gist of the paper. Bidirectional schlieren imaging using dual-LED illumination and a lens aperture as a knife-edge demonstrates that employing the Lens Aperture as a Knife-Edge (LAKE) with two identical LEDs has the distinct advantage of obtaining schlieren images along two cutoff orientations.
Kai: This method allows for controlling LED brightness to obtain a desirable weighted sum of both horizontal and vertical schlieren cutoff images on each camera frames.
Mira: Fundamental Concept of Bidirectional Cutoff Schlieren imaging is a well-known method to visualize flow in transparent media.
Kai: Traditional schlieren employs a knife edge to translate a density gradient in the flow into an intensity variation on the image plane.
Paper summary: Kai: So we're looking at this paper, "Bidirectional schlieren imaging using dual-LED illumination and a lens aperture as a knife-edge". What they're proposing is how you can get those two different cutoffs—horizontal and vertical—at the same time.
Mira: Right, it sounds like the authors are showing that using two identical LEDs with this specific setup gives them an advantage for getting those images along both cutoff orientations. The core claim is about controlling the LED brightness to get a weighted sum of both horizontal and vertical schlieren cutoff images on each camera frame.
Lev: And what they're claiming is that this dual-LED approach, using what they call the Lens Aperture as a Knife-Edge or LAKE, lets you switch between horizontal and vertical cutoffs without any crosstalk in the sequence. The setup involves one LED for horizontal and another for vertical cutoff, separated by a distance of two point eight millimeters.
Kai: It's interesting how they're controlling that brightness to get this weighted sum. But what does that actually mean for getting a real bidirectional schlieren image?
Mira: Well, the paper is clear that what they produce isn't a true bidirectional schlieren image right away. It’s a sum of horizontal and vertical cutoff images, but they show how you can use postprocessing to turn that monochrome sequence into a colorful one.
Lev: That postprocessing part is important because it shows you how to actually get the color visualization from the data they are collecting. They use things like 'lighten' and 'exclusion' blending modes in software like Adobe Photoshop or DaVinci Resolve, which operate pixel by pixel.
Kai: So, they build this hardware setup with an Arduino board to control everything. How fast can this thing actually take pictures? That seems important for a real experiment.
Lev: They achieved an imaging speed of five hundred frames per second with the camera hardware they were using at the time, which is pretty fast for these kinds of setups. They use digital synchronization between the camera frames and the LEDs to make sure you don't get crosstalk when switching orientations, which is a key technical detail.
Mira: The paper mentions that this method doesn't rely on a single light source being reshaped with slits or masks or split by a beam splitter, which is what all existing bidirectional schlieren techniques do. That’s a bit of an interesting design choice there.
Kai: It seems like they are trying to simplify the setup by not needing that extra light manipulation, which would be complicated. But what about the math behind how the cutoffs combine?
Mira: They point out that changing cutoff orientation follows a vector-like sum, where the length of that vector represents the strength of the LED and its direction represents the cutoff’s orientation. But they also note that this similarity to a vector sum stops at just finding the resultant vector orientation and doesn't account for resultant vector length considerations.
Paper summary: Lev: That means you get an image with less contrast because there's this signal averaging effect when you add those cutoffs together, which is something you have to account for in the final interpretation of the data.
Kai: So, what are the practical results they show from their experiments? What does this mean for someone just looking at a flow visualization sequence?
Mira: The middle image in their sequence, where they use equal contributions from both horizontal and vertical cutoffs, appears to provide a bidirectional schlieren image of the flow. And when you zoom in on those images, they say the sum image preserves both horizontal and vertical flow boundaries.
Lev: That preservation of boundaries is what makes it useful for visualizing the structure of the flow itself, even though it's not perfectly pure bidirectional schlieren yet.
Kai: It’s clear they are focused on getting a result that looks like a bidirectional image, even if it needs that postprocessing step to look right. So, what's the big picture here for flow visualization?
Mira: The implication is that you don't need super complicated optical setups with multiple light sources to get both horizontal and vertical gradient information simultaneously. This approach lets you control the relative strengths of those two signals directly through the LED brightness adjustment, which simplifies the hardware design considerably.
Lev: From an engineering standpoint, it's feasible because surface-mount LEDs are bright enough to record well-exposed images even with a six hundred microsecond exposure time. The distance between the source LEDs is two point eight millimeters, and that’s smaller than half the radius of curvature of their mirror setup.
Kai: So they're suggesting this is practical for getting quantitative measurements of density in flow, not just pretty pictures. What are they saying about extending this work?
Mira: They are confident that this approach can be extended to a quantitative measurement of density in flow, which is a big step beyond just visualizing the boundaries. The paper also mentions that they have filed a patent application for this specific approach.
Lev: And one limitation they state is that achieving a true bidirectional schlieren image with a monochrome camera only happens when you isolate those horizontal and vertical cutoff images from one another, which requires their temporal multiplexing approach to alternate acquisition.
Kai: So to wrap up, this paper is about using dual LEDs and a lens aperture as a knife-edge to get both horizontal and vertical schlieren cutoffs at once by controlling brightness, resulting in a weighted sum image that can be colorized later.
Mira: It's an interesting technique because it shows you how you can use simple illumination control to manage the sensitivity of your flow visualization system across two dimensions.
Lev: It’s feasible with existing hardware and it gives a clearer path toward quantitative density measurements, provided you handle that signal averaging effect in your analysis.
Kai: That's what we have here from "Bidirectional schlieren imaging using dual-LED illumination and a lens aperture as a knife-edge".
Conclusion: Kai: So we've seen how they built this setup using two LEDs to get both horizontal and vertical cutoffs on one frame at a time, right?
Mira: Yeah, the title itself is pretty descriptive, "Bidirectional schlieren imaging using dual-LED illumination and a lens aperture as a knife-edge." It just tells you exactly what the apparatus is doing.
Lev: From an error correction standpoint, I'm interested in how they managed that switching between horizontal and vertical states without introducing crosstalk on the camera frames. That synchronization mechanism sounds tricky to build reliably on actual hardware.
Kai: It is tricky because they are relying on digital timing between the Arduino board and the LEDs, using a two thousand microsecond duration for each state change. I wonder what kind of noise that introduces into the final image data.
Mira: Well, the implication here is moving away from needing entirely separate light sources or complex beam splitters just to see both flow directions at once. It simplifies the optical path significantly.
Lev: But you have to remember, they aren't getting a true bidirectional schlieren image right away; they’re getting a weighted sum of two separate ones that need color postprocessing. That averaging effect is something we have to watch out for when we think about quantitative density measurements later on.
Kai: Right, so the authors are confident this approach can actually be extended to measuring flow density quantitatively, not just visualizing boundaries. That's a big step beyond just seeing where the flow is going.
Mira: It suggests that if you can control those LED brightness levels precisely, you gain a lot of flexibility in how you sample the gradient information across the two dimensions.
Lev: The hardware seems feasible because surface mount LEDs are bright enough for six hundred microseconds exposure times, which is good for keeping the measurement record exposed without needing super high-power laser sources.
Kai: So, they're showing a practical way to get that simultaneous view using existing components and simple electronics. It’s about making complex visualization accessible.
Mira: And they've filed a patent for this specific approach, which shows the authors are serious about the underlying hardware design being novel. That’s important context for how we see this technology developing in the field.
Lev: So, while it’s a solid visualization tool, we need to keep an eye on that signal averaging effect they mentioned when moving into real quantitative measurements of flow density.
Kai: Exactly. We need to know if that averaged image actually gives us the correct physical parameters about the fluid flow.
VIMOD KUMAR, MANISH KUMAR
Centre for Sensors, Instrumentation and Cyber-Physical System Engineering Indian Institute of Technology Delhi
physics.optics
Submitted: 2026-10-03
Updated: 2026-10-03
Comments: 9 pages, 7 figures
Journal ref: Optics Letters Vol. 51, Issue 21, pp. 6127-6130 (2026)
DOI: 10.1364/OL.616609
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 61/100
The gist: Bidirectional schlieren imaging using dual-LED illumination and a lens aperture as a knife-edge demonstrates that employing the Lens Aperture as a Knife-Edge (LAKE) with two identical LEDs has the…
Key concepts
- Schlieren Imaging
- Schlieren imaging visualizes fluid flow by detecting variations in the refractive index or density of the medium. Traditionally, a knife edge is used to translate these density gradients into visible intensity changes on an image plane. This technique is essential for visualizing flow structures.
- Dual-LED Illumination Setup
- The system uses two surface-mount LEDs arranged in an L-shape to provide illumination for both horizontal and vertical cutoff visualization. One LED controls the horizontal cutoff, and the other controls the vertical one, allowing independent control over these two directional visualizations.
- Temporal Multiplexing
- Since a single monochrome camera cannot capture both cutoffs simultaneously, this technique alternates between acquiring horizontal and vertical cutoff images for each camera frame. This sequence of alternating captures is then used in postprocessing to create the final, composite colorized bidirectional schlieren image.
Terminology
Summary
Bidirectional schlieren imaging using dual-LED illumination and a lens aperture as a knife-edge demonstrates that employing the Lens Aperture as a Knife-Edge (LAKE) with two identical LEDs has the distinct advantage of obtaining schlieren images along two cutoff orientations. p. 0 This method allows for controlling LED brightness to obtain a desirable weighted sum of both horizontal and vertical schlieren cutoff images on each camera frames. p. 0
Fundamental Concept of Bidirectional Cutoff
Schlieren imaging is a well-known method to visualize flow in transparent media. Traditional schlieren employs a knife edge to translate a density gradient in the flow into an intensity variation on the image plane. p. 0 However, this density or refractive index gradient visualization is directionally selective, as only the refractive index gradients that deflect light perpendicular to the knife-edge orientation are visible. p. 0 For a complete refractive index gradient visualization, both horizontal and vertical cutoff are essential. p. 0
Dual-LED Illumination Setup
The authors describe a dual-LED illumination setup where one LED is responsible for horizontal and the other for vertical cutoff. This approach utilizes an Lshaped geometry for the two surface-mount LEDs, which are wired in a common cathode arrangement. p. 1 The LED separation is measured to be 2. p. 18 mm, corresponding to an aperture F-number of f N ≈ 8. p. 184 for a 35 mm focal length lens. p. 1
Control and Synchronization Mechanism
The control over the cutoff orientation is achieved through digital synchronization between camera frames and LEDs, which enables crosstalk-free alternate horizontal and vertical cutoffs. The dual-LED illumination is driven with a basic programmable Arduino UNO development board. p. 1 The system achieves an imaging speed of 500 fps, which is currently constrained by the available camera hardware. p. 1
Postprocessing for Color Visualization
The technique produces a sum of horizontal and vertical cutoff images, not a real bidirectional schlieren image. A true bidirectional schlieren with a monochrome camera is only possible when horizontal and vertical cutoff images are isolated from one another. p. 2 The authors use a temporal multiplexing approach where each camera frame alternates between the horizontal and vertical cutoffs. p. 2 Postprocessing operations on the image sequence result in a colored bidirectional schlieren image. p. 2
Color Manipulation Techniques
The resulting monochrome images can be transformed into a colorful sequence of bidirectional schlieren images using various blending modes. The authors utilize Adobe Photoshop and DaVinci Resolve for image editing. p. 6 Specific blending modes include 'lighten' and 'exclusion', which operate on a pixel-by-pixel basis. The 'lighten' mode keeps the lighter color for each RGB channel and discards the darker one, with the mathematical relation being Result = max(A, B) for each channel (R, G, B).
Conclusion on Implementation
The approach is feasible to implement with a few KHz high-frame-rate cameras because surface-mount LEDs are bright enough to record well-exposed schlieren images at a 600 µs exposure time. The authors are confident that their approach can be extended to a quantitative measurement of density in flow. p. 3 The configuration is referred to as a coincident single mirror schlieren arrangement because the distance between the source LEDs (d = 2. p. 38 mm) is substantially smaller than the radius of curvature of the mirror (2f = 3600 mm). p. 3
Appendix on Control Implementation
The Arduino UNO board is used to control LEDs and camera timing through two different approaches. The first approach uses the PWM output to control LED brightness, where a function updates both LEDs with a fixed brightness corresponding to a cutoff orientation between 0◦ and 90◦. p. 5 The second approach uses the digital TTL signal output to synchronize LEDs on/off state and camera trigger. p. 5 This scheme involves switching between two states, State 1 for Horizontal and State 2 for Vertical, with a duration of 2000 µs corresponding to 500 frames-per-second. p. 6
Mathematical Basis of Summation
The ability to change cutoff orientation is demonstrated by the fact that the addition of cutoffs follows a vector-like sum, with the length of the vector representing the strength of the LED and the direction of the vector representing the cutoff’s orientation. However, this similarity to vector sum ends at resultant vector orientation and does not include resultant vector length considerations. p. 2 The actual sum produces an image with lesser contrast because of the signal averaging effect. p. 2
Flow Visualization Results
The visualization sequence shows that the middle image, which includes equal contributions from the horizontal and vertical cutoffs, appears to provide a bidirectional schlieren image of the flow. The sum image preserves both horizontal and vertical flow boundaries in zoomed-in views. p. 2 The alternating acquisition allows for several postprocessing operations, resulting in a colored bidirectional schlieren image. p. 2
Reference List
The paper cites numerous prior works related to schlieren imaging and color schlieren techniques, including studies on improved apparatus, and bidirectional quantitative color schlieren. The references span classical optics texts to modern sensor applications. p. 3 The work builds upon previous research concerning simultaneous shadow, schlieren and interferometric visualization. p. 4 p. 4 p. 4 p. 4
Data Availability and Funding
The data underlying the results presented in this paper are available in ref. [17]. The research was supported by Startup Research Grants from Indian Institute of Technology Delhi and Anusandhan National Research Foundation (ANRF). p. 3 A patent application has been filed for the approach presented here. p. 3 The authors acknowledge Adobe Inc. p. 4, Adobe Photoshop, and Blackmagic Design, DaVinci Resolve as resources. p. 4 The paper references several studies on gas flow dynamics and quantitative schlieren methods. p. 3 The work is available in arXiv:2610. p. 0 p. 0 p. 0 p. 004340v1 [physics. p. 0 p. 0 p. 0optics] 3 Oct 2026. p. 0 p. 0 p. 0 p. 0 The paper includes a supplemental document and disclosures regarding patent applications. p. 3 p. 3 p. 3 p. 3 The paper is available in ref. p. 3 [17]. The authors are VIMOD KUMAR and MANISH KUMAR. p. 0 p. 0 p. 0 p. 0 The compilation date is October 6, 2026. p. 0 p. 0 p. 0 p. 0
References
The paper lists references from classical optics to modern sensor applications, including studies on improved apparatus, and bidirectional quantitative color schlieren. The work builds upon previous research concerning simultaneous shadow, schlieren and interferometric visualization. The paper includes references to studies on gas flow dynamics and quantitative schlieren methods. p. 3 p. 3 p. 3 The work is available in arXiv:2610.04340v1 [physics.optics] 3 Oct 2026. The paper includes a supplemental document and disclosures regarding patent applications. The authors are VIMOD KUMAR and MANISH KUMAR. The compilation date is October 6, 2026. The paper lists references from classical optics to modern sensor applications, including studies on improved apparatus, and bidirectional quantitative color schlieren. The work builds upon previous research concerning simultaneous shadow, schlieren and interferometric visualization. The paper includes references to studies on gas flow dynamics and quantitative schlieren methods. The work is available in arXiv:2610.04340v1 [physics.optics] 3 Oct 2026. The paper includes a supplemental document and disclosures regarding patent applications. The authors are VIMOD KUMAR and MANISH KUMAR. The compilation date is October 6, 2026.
The paper lists references from classical optics to modern sensor applications, including studies on improved apparatus, and bidirectional quantitative color schlieren. The work builds upon previous research concerning simultaneous shadow, schlieren and interferometric visualization. The paper includes references to studies on gas flow dynamics and quantitative schlieren methods. The work is available in arXiv:2610.04349v1 [physics. p. 0optics] 3 Oct 2026. The paper includes a supplemental document and disclosures regarding patent applications. The authors are VIMOD KUMAR and MANISH KUMAR. The compilation date is October 6, 2026.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Bidirectional Schlieren Imaging System for Flow Visualization: This system can acquire both horizontal and vertical density gradient visualizations simultaneously using a dual-LED source and a lens aperture as a knife-edge to obtain
crosstalk-free schlieren image sequence.
-
Automated Flow Characterization: The system can automatically control the relative strengths of horizontal and vertical cutoffs by manipulating LED brightness, allowing researchers to visualize flow at any angle, such as the
45 degree
cutoff mentioned in the experiments. -
Bidirectional Color Visualization: Postprocessing crosstalk-free monochrome image pairs allows for the creation of a
colored bidirectional schlieren image
using blending modes likelighten
orexclusion,
enabling visualization of both horizontal and vertical flow boundaries simultaneously with different hues.
Related papers
- Raman optical activity and helicity-dependent phonon splitting in chiral CoSi
- Stability and optical quality of "windmill"-formed 8CB liquid crystal films for replenishable plasma mirrors
- Experimental Scaling of Diffraction Efficiency in Laser-Induced Plasma Gratings
- Photonic Exceptional Topological Bound States in the Continuum
- SHAPE: a sparse Hamiltonian approach for prescribing eigenstates in metamaterials
- All-photonic millimeter-wave and terahertz signal core at room and cryogenic temperatures