Digitally enhanced Multi-wavelength Stabilization using a Passive Fiber Frequency Reference
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: We're looking at the paper: "Digitally enhanced Multi-wavelength Stabilization using a Passive Fiber Frequency Reference".
Mira: Here's the gist of the paper. High-stability frequency stabilization between lasers is achieved using code-based multiplexing of a passive fiber-based interferometer for frequency stabilization and transfer between lasers separated by 85 GHz in frequency using a single shared passive reference The out-of-loop characterization places an upper bound of sub-kHz/√Hz on the transferred frequency noise at Fourier frequencies above 40 mHz, with a differential fractional stability of 7 × 10−13 at 1 second System Architecture and Technique The system employs code-based multiplexing of a passive fiber-based interferometer for frequency stabilization and transfer between lasers separated by 85 GHz in frequency using a single shared passive reference Two fiber lasers are phase modulated with independently delayed quadrature phase shift keying (QPSK) codes outside the interferometer and therefore interrogate a fully passive path imbalanced, uni-directional Mach Zehnder architecture This architecture simultaneously absolves the need for active components within the fiber reference, its unidirectionality makes it immune to first order fiber backscattering, and it is extensible to higher laser counts using the one fiber reference and detection chain The readout utilizes digitally enhanced homodyne interferometry (DEHoI) techniques for frequency stabilization.
Kai: Multiplexed Frequency Readout The DEHoI operates by translating spread-spectrum communication techniques into the optical domain The power detected at balanced homodyne detection can be represented as per the standard two beam interference expression in Eqn.
Kai: The ability to perform phase reconstruction using upfront (common) modulation, called double demodulation, reconstructs the phase difference between the modulation present on both arms of the interferometer This process enables multiplexing of the frequency noise measurements of multiple lasers simultaneously.
Title and authors: Kai: So let's talk about who wrote this and what this paper is actually trying to achieve in the title itself. The title is "Digitally enhanced Multi-wavelength Stabilization using a Passive Fiber Frequency Reference."
Mira: It’s clear they are focusing on making stabilization multi-wavelength, which means dealing with lasers that are not just separated by a small amount, but by large frequency gaps.
Lev: A passive fiber reference implies they aren't relying on active components within the core of the interferometer for their fundamental operation. That simplifies things immensely when you think about long-term stability and environmental robustness.
Kai: And they use digital enhancement in the readout part, which is where they translate that optical measurement into something usable for stabilization.
Mira: They are using code-based multiplexing to do this, meaning they are essentially encoding the frequency measurements into different parts of a signal so the detector can read them all at once.
Lev: That's a clever way to handle multiple channels without adding more active electronics into the critical path of the reference itself.
Kai: And what this means for applications is that you can get high-stability frequency stabilization between lasers separated by eighty-five gigahertz using just one shared passive reference, which is a huge step for things like remote quantum communications <ref:2610.01575#pg1>.
Mira: It's about making these complex multi-laser setups more practical and scalable compared to relying on optical frequency combs for the same task.
Lev: So we're looking at how this architecture scales and manages the noise when you have, say, many lasers instead of just two or three.
The paper's summary: Kai: Okay, moving on to what they actually did in the paper. They use code-based multiplexing of a passive fiber-based interferometer for frequency stabilization and transfer between lasers separated by eighty-five gigahertz using a single shared passive reference <ref:2610.01575#pg1>.
Mira: They also mentioned that the setup uses two fiber lasers phase modulated with independently delayed quadrature phase shift keying, or QPSK codes outside the interferometer.
Lev: So the path itself is fully passive and imbalanced, which is good because it makes it immune to first order fiber backscattering issues that plague other setups.
Kai: That's a big deal for a system designed for long-distance links where you want minimal interference from the fiber itself.
Mira: The readout part uses digitally enhanced homodyne interferometry, or DEHoI, which translates spread-spectrum communication techniques into the optical domain to get those frequency measurements.
Lev: And they use double demodulation to reconstruct the phase difference between the two arms of the interferometer, which lets them multiplex all those frequency noise measurements together.
Kai: So in short, they've got a whole process: encoding lasers with QPSK codes, using a passive path for stabilization, and then using DEHoI to read out all that data digitally.
Mira: The core finding is the differential phase measurement can be recovered by computing a complex multiplication between phasor A-one bar and the conjugate of phasor A-two bar.
Lev: So they are effectively doing sophisticated signal processing on top of a simple passive optical setup to get the final frequency stabilization result.
The paper's improvements: Kai: The paper points out a few key improvements they achieved, particularly regarding the stability numbers and how they handled coupling issues.
Mira: First, they show that the out-of-loop differential measurement gives an Allan deviation of seven times ten to the negative thirteen at one second. That's a very tight figure for this kind of measurement.
Lev: And they also demonstrated continuous laser tunability, which is crucial because you need to be able to adjust things while they are running and still maintain lock.
Kai: They achieved a frequency resolution lock-point tunability with one hundred twenty-two hertz resolution, which means they can tune the lock point of the system very finely.
Mira: Plus, they characterized the residual length noise coupling and found it to be four hundred forty-three parts per million between two lasers based on their wavelength separation.
Lev: That four hundred forty-three parts per million coupling figure is what we need to worry about when designing real hardware; you have a known systematic error that needs to be accounted for in the final control loop.
Kai: They also showed that the noise spectrum traces three and four exhibit a suppression of common frequency noise between the two measurements in the high Fourier frequency band above forty millihertz by approximately a factor of ten <ref:2610.01575#pg2>.
Mira: That suppression is due to common-mode cancellation happening between the two out-of-loop phasemeters, which limits the minimum differential measurement by that common mode cancellation of comb frequency noise.
Conclusion: Kai: So to wrap up, this paper introduces a cost effective and scalable solution for stabilizing multiple lasers at separated frequencies using a single shared passive reference.
Mira: The main implication is that this architecture offers a pathway to frequency-agile stabilization of multiple light sources without the need for an optical frequency comb overhead.
Lev: From an implementation view, it shows how you can get high stability numbers while keeping the physical components relatively simple and passive, which is always a plus when you're building real hardware.
Kai: And they provide a framework for scaling this architecture to higher laser counts, suggesting that the code suppression scales as one over L-c in amplitude for each uncorrelated signal.
Mira: The authors suggest improvements for stability at lower Fourier frequencies below forty millihertz by implementing cyclic noise upconversion and minimizing that residual length coupling <ref:2610.01575#pg2>.
Lev: If you're looking to push this further, the next step is definitely tackling those low-frequency noise floors, because that's where the real difficulty usually lies in these types of setups.
Kai: This work is relevant for frequency matching requirements in things like TF-QKD and CV-QKD extension to remote laser sources with link stabilization, and even for larger wavelength separations needed for terahertz synthesis.
Mira: It’s a solid piece of work because it shows how you can achieve relative stability between optical carriers in practical implementations where local oscillators or pilot assistance are difficult.
Lev: It's a good demonstration of using passive components intelligently to solve a very demanding frequency matching problem that often requires active stabilization.
Department of Applied Physics, KTH Royal Institute of Technology · Centre for Gravitational Astrophysics, Australian National University
physics.optics
Submitted: 2026-10-01
Updated: 2026-11-05
Comments: 23 pages, 7 figures
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 92/100
The gist: High-stability frequency stabilization between lasers is achieved using code-based multiplexing of a passive fiber-based interferometer for frequency stabilization and transfer between lasers…
Key concepts
- Code-based Multiplexing
- This technique uses different phase modulation codes on the two fiber lasers to interrogate a passive interferometer simultaneously. This allows the system to measure the frequency noise of multiple lasers at once, effectively multiplexing them onto a single measurement channel without needing separate references for each laser.
- Digitally Enhanced Homodyne Interferometry (DEHoI)
- DEHoI translates spread-spectrum communication into the optical domain. It uses digital techniques to reconstruct the phase difference between two arms of an interferometer by performing double demodulation, enabling simultaneous frequency noise measurement from multiple lasers.
- Out-of-Loop Characterization
- This analysis determines the noise performance outside the main control loop. For this system, it showed that transferred frequency noise above 40 mHz is suppressed by a factor of 10 and is bounded by sub-kHz/√Hz, indicating good stability in the relevant frequency range.
- Residual Coupling
- This measures the unwanted interaction between the interferometer length and the frequency stabilization error signal. A residual coupling of 443 ppm was found, arising from modulation asymmetries, which limits performance in specific low-frequency bands.
Terminology
Summary
High-stability frequency stabilization between lasers is achieved using code-based multiplexing of a passive fiber-based interferometer for frequency stabilization and transfer between lasers separated by 85 GHz in frequency using a single shared passive reference The out-of-loop characterization places an upper bound of sub-kHz/√Hz on the transferred frequency noise at Fourier frequencies above 40 mHz, with a differential fractional stability of 7 × 10−13 at 1 second
System Architecture and Technique
The system employs code-based multiplexing of a passive fiber-based interferometer for frequency stabilization and transfer between lasers separated by 85 GHz in frequency using a single shared passive reference Two fiber lasers are phase modulated with independently delayed quadrature phase shift keying (QPSK) codes outside the interferometer and therefore interrogate a fully passive path imbalanced, uni-directional Mach Zehnder architecture This architecture simultaneously absolves the need for active components within the fiber reference, its unidirectionality makes it immune to first order fiber backscattering, and it is extensible to higher laser counts using the one fiber reference and detection chain The readout utilizes digitally enhanced homodyne interferometry (DEHoI) techniques for frequency stabilization.
Multiplexed Frequency Readout
The DEHoI operates by translating spread-spectrum communication techniques into the optical domain The power detected at balanced homodyne detection can be represented as per the standard two beam interference expression in Eqn. 2. The ability to perform phase reconstruction using upfront (common) modulation, called double demodulation, reconstructs the phase difference between the modulation present on both arms of the interferometer This process enables multiplexing of the frequency noise measurements of multiple lasers simultaneously. p. 4 An important property of DEHoI we utilize is the ability to perform phase reconstruction
using upfront (common) modulation. This process, called double demodulation, reconstructs
the phase difference between the modulation present on both arms of the interferometer
[27]. This phase subtraction can be computed as the difference between two phasors. We
can compute the phasor difference by performing a complex multiplication between phasor
A¯
1 and the conjugate of phasor A¯
2 [31]:
∆ϕ12 = ̸ A¯
1.Where the paper says it
Where the paper says it
Stability Performance
The out-of-loop differential measurement shows an Allan deviation of 7×10−13 at 1 s Continuous operation over 3.5 days with the transferred laser bounded within ±300 kHz The noise spectrum shows that traces 3 and 4 exhibit suppression of common frequency noise between the two measurements in the high Fourier frequency band (above 40 mHz) by approximately a factor of 10. p. 3 5 days with the transferred laser bounded within ±300 kHz,
and digitally controlled lock-point tunability with 122 Hz resolution. Finally, we characterize
the residual interferometer length noise coupling at hour timescales, measuring wavelength
dependent cross-coupling at the 700 ppm level and thereby identifying the dominant limitation to medium and long term stability. For full multi-wavelength operation, an
additional challenge is that common mode cancellation of interferometer length noise is not
exact when the interrogating lasers are separated in wavelength [16, 17]. In previous demonstrations of multi-wavelength frequency transfer methods for fiber references, a bi-directional interferometer architecture was used with an active modulator within
to create two self-heterodyne measurements [16, 17].Where the paper says it
Where the paper says it
Cross-Coupling and Limitations
The residual coupling between the interferometer length and the frequency stabilization error signal is computed to be 443 ppm This residual error arises from modulation asymmetries and modulation-quadrature cross coupling, resulting in a parasitic phasor about the main measurement. The noise process with a spectral shape proportional to the cosine of the interferometer phase dynamics is observed from 40 mHz to 0. p. 4 In an arm-length
mismatched interferometer, ∆ϕ1(t) is proportional to the laser frequency noise ∆ν1(t) scaled
by the interferometer free-spectral range, thus providing our measurement of laser frequency
with respect to the interferometer. An important property of DEHoI we utilize is the ability to perform phase reconstruction
using upfront (common) modulation. Out-of-loop characterization places an upper bound of sub-kHz/√
Hz on the transferred frequency
noise at Fourier frequencies above 40 mHz, with a differential fractional stability of 7 × 10−13 at
1 second. We also demonstrate continuous laser tunability and characterize the residual length
noise coupling.Where the paper says it
Where the paper says it
Tunability and Scalability
The system demonstrates software lock-point tunability, allowing Laser 2 to be locked and modulated while stabilized The resolution in frequency can then be determined by dividing the interferometer FSR (8 MHz) by the address word length (216), giving a frequency tuning resolution of 122 Hz The architecture is extensible to interrogate multiple lasers, with scaling factors for hardware resources and shot noise levels being analyzed. The expected code suppression scales as 1/Lc in amplitude for each uncorrelated signal, which increases with √N − 1 for N signals. p. 1 This places stringent requirements on optical frequency matching, and relative phase stability [5–7]. In implementations based on dual-band stabilization, an auxiliary
wavelength co-propagates with the quantum signals, typically in an adjacent ITU wavelength channel, in order to track and suppress large-amplitude phase drift introduced by
∗ hilmak@kth.Where the paper says it
Conclusion and Future Work
The architecture offers a cost effective, scalable and readily deployable solution compared to the use of optical frequency combs for stabilizing multiple lasers at separated frequencies The authors propose a way forward to improve stability at Fourier frequencies below 40 mHz by implementing cyclic noise upconversion and minimizing residual length coupling. The demonstrated relative stability and software-controlled tunability are relevant to the frequency-matching requirements of TF-QKD and CV-QKD Extension to remote laser sources with link stabilization, and to the larger wavelength separations required for terahertz synthesis, present avenues for future work. p. 1 In TF-QKD,
long distance operation relies on achieving high visibility interference at the central measurement station, despite two optical fields being generated by remote users separated by
up to 1000 km. This places stringent requirements on optical frequency matching, and relative phase stability [5–7].Where the paper says it
ACKNOWLEDGMENTS
HK and VBA would like to acknowledge the support from the Swedish Research Council (VR starting grant 2023-0519), G¨oran Gustafsson Prize for early career researchers and the Wallenberg Center for Quantum Technology (WACQT) in Sweden RLW and CPB are affiliated with the OzGrav Australian Research Council Centre of Excellence CPB is additionally affiliated with Forge Photonics PTY LTD and COMBS Australian Research Council Centre of Excellence The authors declare no competing interests.
REFERENCES
[1] D. Huang, P. Huang, D. Lin, C. Wang, and G. Zeng, High-speed continuous-variable quantum key distribution without sending a local oscillator, Optics Letters 40, 3695 (2015)
[2] B. Qi, P. Lougovski, R. Pooser, W. Grice, and M. Bobrek, Generating the local oscillator “locally” in continuous-variable quantum key distribution based on coherent detection, Physical Review X 5, 041009 (2015)
[3] D. B. S. Soh, C. Brif, P. J. Coles, N. L¨utkenhaus, R. M. Camacho, J. Urayama, and M. Sarovar, Self-referenced continuous-variable quantum key distribution protocol, Physical Review X 5, 041010 (2015)
[4] F. Laudenbach, B. Schrenk, C. Pacher, M. Hentschel, C.-H. F. Fung, F. Karinou, A. Poppe, M. Peev, and H¨ubel, Pilot-assisted intradyne reception for high-speed continuous-variable quantum key distribution with true local oscillator, Quantum 3, 193 (2019)
[5] M. Lucamarini, Z. Yuan, J. F. Dynes, and A. J. Shields, Overcoming the rate-distance limit of quantum key distribution without quantum repeaters, Nature 557, 400 (2018)
[6] C. Clivati, A. Meda, S. Donadello, et al., Coherent phase transfer for real-world twin-field quantum key distribution, Nature Communications 13, 157 (2022)
[7] Y. Liu, W.-J. Zhang, C. Jiang, J.-P. Chen, C. Zhang, W.-X. Pan, D. Ma, H¨ Dong, J.-M Xiong, C.-J Zhang, H Li, R-C Wangj Wu T-Y Chen L You X-B Wang Q Zhang and J-W Pan Experimental twin-field quantum key distribution over 1000 km fiber distance Physical Review Letters 130, 210801 (2023)
[8] F. K´ef´elian, H. Jiang, P. Lemonde, and G. Santarelli, Ultralow-frequency-noise stabilization of a laser by locking to an optical fiber-delay line, Optics Letters 34, 914 (2009)
[9] J. Kong, V. G. Lucivero, R. Jim´enez-Mart´ınez, and M. W Mitchell, Long-term laser frequency stabilization using fiber interferometers Review of Scientific Instruments 86, 073104 (2015)
[10] I. Jeon, C. Ahn, C. Kim, S. Park, W Jeon, L Duan, and J Kim Palm-sized vibrationinsensitive and vacuum-free all-fiber photonic module for 10e-14 level stabilization of cw lasers and frequency combs APL Photonics 8, 120804 (2023)
[11] K. H. Wanser, Fundamental phase noise limit in optical fibres due to temperature fluctuations Electronics Letters 28, 53 (1992)
[12] S. Ngo, T. G. McRae, M. B. Gray, and D A Shaddock Homodyne digital interferometry for a sensitive fiber frequency reference Optics Express 22, 18168 (2014)
[13] Y Zhang, C P Bandutunga T G McRae M B Gray and J H Chow Double rayleigh scattering in a digitally enhanced all-fiber optical frequency reference Optics Express 29, 26319 (2021)
[14] I Jeon, W Jeong, C Ahn and J Kim 10e-15 level laser stabilization down to fiber thermal noise limit using self-homodyne detection Optics Letters 50, 1057 (2025)
[15] S Grabielle, D Show, F Audo, J-P Coulon, and F K´ef´elian Locking noise in laser frequency stabilization to an optical fiber delay line Optics Express 33, 35028 (2025)
[16] N. B H´ebert, A P Hilton, P S Light, and A N Luiten Hertz-level frequency comparisons between diverse color lasers without a frequency comb Optics Letters 45, 4196 (2020)
[17] D. Show, Laser frequency locking and spectral transfer of coherence with a fiber interferometer Theses Universit´e Cˆote d’Azur (2025)
[18] D A Shaddock, Digitally enhanced heterodyne interferometry Optics Letters 32, 3355 (2007)
[19] T G McRae, S Ngo, D A Shaddock M T L Hsu and M B Gray Digitally enhanced optical fiber frequency reference Optics Letters 39, 1752 (2014)
[20] P de Groot and S Kishner Synthetic wavelength stabilization for two-color laser-diode interferometry Applied Optics 30, 4026 (1991)
[21] B He, J Yang, F Meng, J Yu, C Zhang Q-F Yang Y Zuo Y Lin Z Chen Z Fang and X Xie Highly coherent two-color laser and its application for low-noise microwave generation Nature Communications 16, 4034 (2025)
[22] G Danion, C Hamel, L Frein, F Bondu, G Loas, and M Alouini Dual frequency laser with two continuously and widely tunable frequencies for optical referencing of GHz to THz beatnotes Optics Express 22, 17673 (14)
[23] E A Kittlaus, D Eliyahu, S Ganji, S Williams, A B Matsko, K B Cooper and S Forouhar A low-noise photonic heterodyne synthesizer and its application to millimeter-wave radar Nature Communications 12, 4397 (2021)
[24] S.-C. Ebenhag, P O Hedekvist, and K Jaldehag Active detection of propagation delay variations in single way time transfer utilizing dual wavelengths in an optical fiber network 2011 Joint Conference of the IEEE International Frequency Control and the European Frequency and Time Forum (FCS) Proceedings 1 (2011)
[25] J D Roslund, A S Kowligy, J Fujita, M P Ledbetter, A V Rakholia, M M Boyd, J R Abo-Shaeer and A Cing¨oz Optical two-tone time transfer Phys. Rev. Appl. 24, 014001 (2025)
[26] C P Bandutunga, T G McRae, Y Zhang, M B Gray and J H Chow Infrasonic performance of a passively stabilized all-fiber optical frequency reference Optics Express 28, 9280 (2020)
[27] A J Sutton, O Gerberding, G Heinzel, and D A Shaddock Digitally enhanced homodyne interferometry Optics Express 20, 22195 (2610.01575)
[33] M Tr¨obs and G Heinzel Improved spectrum estimation from digitized time series on a logarithmic frequency axis Measurement 39, 120 (2610.01575)
[34] C S Sambridge and K McKenzie Dual-quadrature phasemeter for space-based interferometry Physical Review Applied 24, 014009 (2610.01575)
[35] P Hu, J Zhu, X Guo, and J Tan Compensation for the variable cyclic error in homodyne laser interferometers Sensors (Switzerland) 15, 3090 (2610.01575)
[36] A O Chan, J Wong, P G Sibley and C P Bandutunga Narrow-band readout and compression of a single acousto-optic frequency comb using digitally enhanced heterodyne interferometry Optics Express 33, 11876 (2025)
[37] P G Sibley, R L Ward, L E Roberts, S P Francis and D A Shaddock Crosstalk reduction for multi-channel optical phase metrology Optics Express 28, 10400 (2610.01575)
--- Page 1 ---
Digitally enhanced Multi-wavelength Stabilization using a Passive Fiber Frequency ReferenceHilma Karlsson∗ and Vaishali Adya Department of Applied Physics, KTH Royal Institute of Technology, Roslagstullsbacken 21, Stockholm SE-106 91, Sweden Robert L. Ward and Chathura P. p. 0 Digitally enhanced Multi-wavelength Stabilization using a Passive
Fiber Frequency Reference
Hilma Karlsson∗ and Vaishali Adya
Department of Applied Physics, KTH Royal Institute of Technology,
Roslagstullsbacken 21, Stockholm SE-106 91, Sweden
Robert L. Ward and Chathura P. Ward and Chathura P. Bandutunga†
Centre for Gravitational Astrophysics,
College of Science, Australian National University,
Acton, Australian Capital Territory 2601, Australia
(Dated: October 2, 2026)
1
arXiv:2610. Bandutunga†
Centre for Gravitational Astrophysics,
College of Science, Australian National University,
Acton, Australian Capital Territory 2601, Australia
(Dated: October 2, 2026)
1
arXiv:2610. 01575v1 [physics. 01575v1 [physics. optics] 1 Oct 2026Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
--- Page 3 ---
Relative phase and frequency stability between optical carriers is a key requirement in precision photonics, coherent communications, and quantum networks <ref:2610.01575#pg4> In practical implementations that are based on a local local oscillator, self-referenced phase recovery, or pilot-assisted reconstruction of quantum states, differential phase and frequency noise contributes directly to phase estimation error and excess noise [1–4] <ref:2610. p. 1 In CV-QKD, the efficacy of the protocol relies on establishing
or recovering a stable phase relation between the received signal and the local oscillator. In practical implementations that are based on a local local oscillator, self-referenced phase
recovery, or pilot-assisted reconstruction of quantum states, differential phase and frequency
noise contributes directly to phase estimation error and excess noise [1–4]. In practical implementations that are based on a local local oscillator, self-referenced phase
recovery, or pilot-assisted reconstruction of quantum states, differential phase and frequency
noise contributes directly to phase estimation error and excess noise [1–4]. In TF-QKD,
long distance operation relies on achieving high visibility interference at the central measurement station, despite two optical fields being generated by remote users separated by
up to 1000 km. In TF-QKD,
long distance operation relies on achieving high visibility interference at the central measurement station, despite two optical fields being generated by remote users separated by
up to 1000 km. This places stringent requirements on optical frequency matching, and relative phase stability [5–7]. This places stringent requirements on optical frequency matching, and relative phase stability [5–7]. In implementations based on dual-band stabilization, an auxiliary
wavelength co-propagates with the quantum signals, typically in an adjacent ITU wavelength channel, in order to track and suppress large-amplitude phase drift introduced by
∗ hilmak@kth. long-distance fiber transmission. For the auxiliary wavelength to correctly track the phase
drifts of the primary wavelength of the quantum signals, the auxiliary wavelength needs to
be wavelength referenced back to the primary wavelength, prior to link injection. For the auxiliary wavelength to correctly track the phase
drifts of the primary wavelength of the quantum signals, the auxiliary wavelength needs to
be wavelength referenced back to the primary wavelength, prior to link injection. This necessitates the local transfer of frequency stability when preparing the auxiliary wavelength,
with multi-GHz separations. This necessitates the local transfer of frequency stability when preparing the auxiliary wavelength,
with multi-GHz separations. Passive fiber interferometers based on path imbalanced Mach Zehnder and Michelson
interferometers provide a promising route to the stabilization required for such experiments. These interferometers convert laser frequency fluctuations into measurable phase fluctuations using standard fiber components, and are therefore attractive as passive frequency
discriminators [8–10]. The achievable performance of these references is fundamentally limited by thermodynamic path length fluctuations, environmental perturbations, and parasitic
interference processes [11–14]. The locking process itself also contributes, with discriminator nonlinearity coupling out of band phase noise contributing to a white noise floor that
is suppressed only at high loop bandwidth [15]. For full multi-wavelength operation, an
additional challenge is that common mode cancellation of interferometer length noise is not
exact when the interrogating lasers are separated in wavelength [16, 17].Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
--- Page 4 ---
In previous demonstrations of multi-wavelength frequency transfer methods for fiber references, a bi-directional interferometer architecture was used with an active modulator within to create two self-heterodyne measurements [16, 17] <ref:2610.01575#pg5> These demonstrations showed a 1 Hz/√Hz relative stability from 80 Hz to 800 Hz for lasers separated by 666 nm and below 1 Hz/√Hz transfer noise from 4 Hz to 30 kHz for a frequency separation of respectively <ref:2610. p. 2 In previous demonstrations of multi-wavelength frequency transfer methods for fiber references, a bi-directional interferometer architecture was used with an active modulator within
to create two self-heterodyne measurements [16, 17]. These demonstrations showed a 1
Hz/√
Hz relative stability from 80 Hz to 800 Hz for lasers separated by 666 nm and below
1 Hz/√
Hz transfer noise from 4 Hz to 30 kHz for a frequency separation of respectively. These demonstrations showed a 1
Hz/√
Hz relative stability from 80 Hz to 800 Hz for lasers separated by 666 nm and below
1 Hz/√
Hz transfer noise from 4 Hz to 30 kHz for a frequency separation of respectively. A demonstration by Grabrielle et al. A demonstration by Grabrielle et al. uses two 1542 nm lasers with a separation of 450
MHz, stabilized using frequency non-degenerate Pound-Drever-Hall locking on a Michelson
interferometer with an operational frequency band between 120 Hz and 8 kHz, with discrete
lock points spaced at half an interferometer free spectral range[15].Where the paper says it
Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Code-based multiplexing allows for
the overhead of an optical frequency comb
to be avoided when stabilizing multiple lasers, offering ascalable, frequency agile stabilization of multiple light sources.
-
The system can achieve high-stability frequency stabilization between lasers separated by 85 GHz using a single shared passive reference with an out-of-loop differential measurement showing
an Allan deviation of 7×10−13 at 1 s.
-
The architecture enables continuous laser tunability and provides a
fine resolution lock-point tunability with 122 Hz resolution,
which can be used to continuously tune and set the lock point of the system at arbitrary offsets. -
The system can perform wavelength dependent cross-coupling characterization, measuring a residual coupling of 443 ppm between two lasers based on their wavelength separation.
Abstract
High-stability frequency stabilization between lasers is essential for applications such as precision metrology, frequency dissemination, and quantum communications. We demonstrate the use of code-based multiplexing of a passive fiber-based interferometer for frequency stabilization and transfer between lasers separated by 85 GHz in frequency using a single shared passive reference. Out-of-loop characterization places an upper bound of sub-kHz/ sqrt Hz on the transferred frequency noise at Fourier frequencies above 40 mHz, with a differential fractional stability of 7 times10-13 at 1 second. We also demonstrate continuous laser tunability and characterize the residual length noise coupling. Finally, we provide a framework for scaling the architecture to higher laser counts, offering a pathway to scalable, frequency agile stabilization of multiple light sources without the overhead of an optical frequency comb.
Related papers
- Raman optical activity and helicity-dependent phonon splitting in chiral CoSi
- Stability and optical quality of "windmill"-formed 8CB liquid crystal films for replenishable plasma mirrors
- Experimental Scaling of Diffraction Efficiency in Laser-Induced Plasma Gratings
- Photonic Exceptional Topological Bound States in the Continuum
- SHAPE: a sparse Hamiltonian approach for prescribing eigenstates in metamaterials
- All-photonic millimeter-wave and terahertz signal core at room and cryogenic temperatures