A measurement-based approach to EPFD calculation, to quantify the impact of satellite mega-constellations on low-frequency radio astronomy
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Astrophysics. The day in astrophysics: observations, models and what the data forces.
Vera: I'm Vera.
Jocelyn: And I'm Jocelyn, here with Subrahmanyan.
Vera: We're looking at the paper: "A measurement-based approach to EPFD calculation, to quantify the impact of satellite mega-constellations on low-frequency radio astronomy".
Jocelyn: Here's the gist of the paper. A measurement-based approach to EPFD calculation quantifies the impact of satellite mega-constellations on low-frequency radio astronomy by adapting ITU-R EPFD frameworks to real radio telescope measurement data, which is vital for verifying interference impacts in an evolving regulatory landscape Context and Aims Satellite mega-constellations generate Unintended Electro-Magnetic Radiation (UEMR) that impacts low frequency radio astronomy, but enforcement mechanisms are absent in the Radio Regulations (RR) The aim is to adapt compatibility study methods based on satellite constellation simulations, particularly the Equivalent Power FluxDensity (EPFD) framework, to real-world radio telescope measurement data This work addresses conceptual differences between forward-model EPFD calculations and measurement-based approaches, including antenna gain treatment and detection limitations EPFD Formalism Adaptation The paper adapts the ITU-R EPFD calculation framework to radio astronomy measurement data obtained from all-sky interferometric imaging It explicitly addresses the conceptual differences between forward-model EPFD calculations and measurement-based approaches, including antenna gain treatment, temporal averaging, and detection limitations The core mathematical formulation for instantaneous EPFD is given by Equation (1) This expression is typically reformulated without the normalization by Gr,max as EPFD0 dBi(ωn) = X Na i=1 Pi Gt,i(θ′ i, φi)Gr(θi, ωn) 4πd 2 i (2) Measurement-Based Estimation The methodology is interpreted as a measurement-based estimator of the EPFD quantity defined within the ITU-R framework The estimator may therefore be written as EPFD
0 dBi(ωn) = N Xcells i=1 Φ¯ iGr(θi, ωn), (6) In the idealized case of perfect calibration, complete source detection, exact beam knowledge, negligible thermal noise, and negligible temporal smearing, the expectation value of the estimator converges toward the true EPFD: E h EPFD [0 dBi(ωn) i= EPFD0 dBi(ωn). [Vera: (7) Application to All-Sky Data The application involves accumulating detected flux densities in sky cells and averaging over 2 000 s windows, yielding an average source flux density Φ¯ i for each source cell i The final measurement-based EPFD map is obtained by applying the receive-side directional weighting to these measured fluxes, resulting in Equation (10) which is the form implemented in the present analysis This results in an all-sky measurement-based EPFD map where each output cell represents the aggregate interference level for that pointing direction, including contributions entering through both the main beam and sidelobes Results and Conclusions For the nominal analysis using all output sky cells, the XX polarization exceeds the RA.769 threshold in 58.7% of samples for the full dataset The corresponding margins range from −18.6 to −16.3 dB These exceedance fractions are far above the 2% single-system criterion in Recommendation ITU-R RA.1513-2 The corresponding required uniform attenuation is A2% = −∆2% when ∆2% < 0, ranging from −18.6 to −16.3 dB Measurement-based implementations provide a practical pathway toward verification and long-term monitoring at low radio frequencies, which could form an important component of enforceability Proposed Adaptation All-sky interferometric measurements provide a particularly well-suited starting point for such an adaptation because each pixel in an interferometric image can be interpreted as the output of a synthesized beam pointed in that direction Measurement-based approaches offer a means to assess assumptions related to satellite emission levels, propagation effects, antenna responses, source detectability, and temporal variability using real observational data Limitations of Verification Practical limitations include finite integration time of interferometric imaging which causes satellite signals to decorrelate and smear spatially in the reconstructed images Signal-to-noise thresholds introduce selection effects, and temporal smearing reduces the apparent peak brightness of moving emitters, leading to a lower bound on the true interference environment Future Directions Measurement-based EPFD products could be used to validate forward models and inform coordination discussions The development of dedicated instrumentation and data processing pipelines is therefore a key component of this effort A hybrid model, in which observational facilities provide the data and processing, while regulatory bodies define the standards and interpretation frameworks, may offer a practical path forward Discussion The central result is that all-sky interferometric measurements can be interpreted in a manner compatible with the EPFD formalism This provides an empirical counterpart to the theoretical construct, capturing aggregate behavior of real systems Measurement-based approaches provide a direct empirical estimate of EPFD subject to observational selection effects and instrumental limitations The results provide an initial empirical baseline for UEMR levels in a protected radio astronomy band Acknowledgements The authors thank the anonymous referee for constructive comments that improved the manuscript This work was supported by the National Science Foundation grant no.2229428 References Adhikary, S.
Jocelyn: 2026, Impact of satellite constellations on the GMRT from the upcoming direct to device services, Tech.
Vera: rep., NCRA-TIFR Bassa, C.
Paper summary: Vera: So we're looking at this paper now, "A measurement-based approach to EPFD calculation, to quantify the impact of satellite mega-constellations on low-frequency radio astronomy." Basically, they're taking the standard way we calculate Equivalent Power Flux Density and adapting it using actual measurements from radio telescopes instead of just simulations.
Jocelyn: Right. The core idea here is that there are these big groups of satellites up there, and they create unwanted electromagnetic radiation, or UEMR, which messes with low frequency radio astronomy. But the rules for enforcing this in the Radio Regulations are missing, so this paper tries to bridge that gap by using real telescope data to test how much interference is actually happening.
Subrahmanyan: What interests me about this is that it addresses a real problem: we have these theoretical models, but we don't have good empirical checks against the regulatory framework because the modeling and measurement approaches are so different. This paper claims it adapts the ITU-R EPFD framework to actual measurements, which is vital for verifying those interference impacts in an evolving regulatory landscape.
Vera: Exactly. They are looking at the conceptual differences between forward-model EPFD calculations and this measurement-based approach, specifically how things like antenna gain treatment and detection limitations affect the final number. They have a mathematical formulation for instantaneous EPFD defined by Equation one which involves the radiated power, transmit antenna gain, and radio telescope gain patterns <ref:2609.01995#pg1>.
Jocelyn: And they use that to set up a measurement-based estimator called Equation six <ref:2609.01995#pg1>. It uses measured average flux density for each sky cell and combines it with the receiving response function Gr of theta i omega n. In an ideal scenario, the expectation value of this estimator converges toward the true EPFD defined by Equation seven which is what they're trying to estimate empirically <ref:2609.01995#pg1>.
Subrahmanyan: So it’s essentially saying that by using measured data instead of just simulated satellite contributions, we get a direct empirical estimate of that EPFD quantity. If you have perfect calibration and detection, the expectation value settles on the true EPFD defined in the ITU-R framework.
Paper summary: Vera: And they apply this to all-sky data by accumulating detected flux densities in sky cells and averaging over two thousand second windows to get an average source flux density, or phi bar i <ref:2609.01995#pg1>. Then they use that to create a measurement-based EPFD map using Equation ten which incorporates both the main beam and sidelobe contributions <ref:2609.01995#pg1>.
Jocelyn: That part is really interesting because each pixel in an interferometric image can be seen as the output of a synthesized beam pointed in that direction, which maps naturally onto the EPFD formalism. This measurement-based summation uses Equation ten to capture all those different contributions through the synthesized beam response <ref:2609.01995#pg1>.
Subrahmanyan: But they also admit there are limitations with this method. They say that practical limitations include finite integration time of interferometric imaging, which causes satellite signals to smear spatially in the reconstructed images. Plus, signal-to-noise thresholds introduce selection effects, and temporal smearing reduces the apparent peak brightness of moving emitters, meaning it gives a lower bound on the true interference environment.
Vera: That makes sense from an observational standpoint. So what they found when they ran their nominal analysis using all output sky cells is that for the XX polarization, it exceeds the RA.seven hundred sixty-nine threshold in fifty-eight point seven percent of samples across their full dataset.
Jocelyn: And those corresponding margins range from negative eighteen point six to negative sixteen point three decibels. They note that these exceedance fractions are far above the two percent single-system criterion mentioned in Recommendation ITU-R RA.one thousand five hundred thirteen-two which means the required uniform attenuation is A two percent equal to minus delta two percent when delta two is less than zero, ranging from negative eighteen point six to negative sixteen point three decibels.
Subrahmanyan: So what this actually changes for the listener is that it shows a significant level of interference based on real measurements, even when compared to prior EPFD simulations that assumed isotropic UEMR levels and simplified receiving antennas. The measurement-based results show a similar order of magnitude exceedance, suggesting reasonable consistency despite the different ways they're calculated.
Vera: The paper points out that all-sky interferometric measurements are a particularly well-suited starting point for this adaptation because each pixel in an interferometric image can be interpreted as the output of a synthesized beam pointed in that direction. This gives them a way to assess assumptions about satellite emission levels, propagation effects, antenna responses, source detectability, and temporal variability using real observational data.
Paper summary: Jocelyn: They are proposing a hybrid model where observational facilities provide the data and processing, while regulatory bodies define the standards and interpretation frameworks. This could be a practical path forward for long-term monitoring of interference at low radio frequencies.
Subrahmanyan: It’s interesting how they frame this as providing an empirical counterpart to the theoretical construct, capturing the aggregate behavior of real systems. The central result is that all-sky interferometric measurements can be interpreted in a manner compatible with the EPFD formalism. This provides an empirical baseline for UEMR levels in a protected radio astronomy band.
Vera: So what this means is that we can use real observational data to get an empirical estimate of EPFD, even if it comes with some instrumental limitations and selection effects. It gives us something concrete to compare against the regulatory criteria.
Jocelyn: And those results suggest that for the XX polarization, the interference levels are consistently high enough to warrant attention according to existing standards when you look at what's measured across all sky cells. This sets a starting point for how we might approach enforcement discussions with satellite operators and regulators.
Subrahmanyan: The future direction they suggest is developing dedicated instrumentation and data processing pipelines, which is a key component of this effort. A hybrid model where observational facilities handle the data processing, but regulatory bodies set the standards, seems like a way to bridge that gap.
Vera: So for those of us who look at the sky data, it means we have a direct empirical estimate of interference levels that we can use to validate forward models and inform coordination discussions. It moves EPFD from being purely theoretical to being something grounded in what we actually observe.
Jocelyn: And from a time-domain perspective, these measurement-based products could be used to monitor the temporal variability of UEMR, which is another crucial aspect we need to address when dealing with moving constellations.
Subrahmanyan: So ultimately this paper provides an initial empirical baseline for UEMR levels in a protected radio astronomy band that is derived from real observational constraints. It moves the discussion toward a more practical way to handle these complex interference issues in the future.
Conclusion: Vera: So we're wrapping up this look at "A measurement-based approach to EPFD calculation, to quantify the impact of satellite mega-constellations on low-frequency radio astronomy."
Jocelyn: Yeah, that paper is all about taking those theoretical Equivalent Power Flux Density calculations and grounding them in actual telescope measurements.
Subrahmanyan: It’s trying to figure out how much unwanted electromagnetic radiation from huge satellite constellations actually impacts our low frequency radio observations.
Vera: The authors are using real data from all-sky interferometric imaging to estimate this interference, which is a big deal because we don't have clear rules yet for regulating these satellite effects in the Radio Regulations.
Jocelyn: They’re basically saying, "Hey, we can use what our telescopes see to get a better picture of the real-world impact on things like radio astronomy."
Subrahmanyan: It connects the theoretical stuff—the ITU-R framework—with what we actually observe in the sky. If their measurement-based estimates hold up, it gives us an empirical check on whether satellite interference levels are as bad as the models predict.
Vera: The results show that for certain polarization directions, they’re seeing exceedance levels way above what the standards suggest is even a small concern.
Jocelyn: That level of exceedance comes from looking at every sky cell and averaging it over thousands of seconds, which helps smooth out the noise a bit.
Subrahmanyan: The key is that this measurement-based method lets us test assumptions about satellite emission and antenna responses using real data, rather than just relying on simplified computer models.
Vera: The paper’s main implication is providing a practical way to verify if the interference levels are actually causing problems for sensitive radio telescopes.
Jocelyn: It shows that we can start building a bridge between the regulatory language and what we see when we look at the sky data.
Subrahmanyan: So, it sets an empirical baseline for UEMR levels, which is a step toward making those regulatory discussions much more concrete.
Vera: But they also admit this method has limitations, like signal smearing from the imaging process and noise thresholds affecting what we can actually measure.
Jocelyn: Right. So while it’s a huge step forward in terms of empirical data, we still need better ways to process that raw observational data to get the cleanest numbers possible.
Subrahmanyan: That's where the future work lies—developing better tools and pipelines so we can turn these measurement products into something regulators can actually use.
Tingay, S.J., Hellbourg, G., Sheen, D., Grigg, D., Winkel, B., Di Vruno, F., Indermuehle, B.
International Centre for Radio Astronomy Research · Cahill Center for Astronomy and Astrophysics · Owens Valley Radio Observatory · Department of Electrical Engineering and Computer Science at Massachusetts Institute of Technology · Haystack Observatory at Massachusetts Institute of Technology · Max-Planck-Institut für Radioastronomie · IAU Centre for the Protection of the Dark and Quiet Sky from Satellite Constellation Interference
astro-ph.IM
Submitted: 2026-09-02
Updated: 2026-09-02
Comments: Accepted to Astronomy and Astrophysics (02/09/2026), 13 pages, 4 figures, 3 tables (abstract abridged relative to accepted version, due to arXiv character limits)
Journal ref: A&A 714, A398 (2026)
DOI: 10.1051/0004-6361/202662188
Code: https://github.com/greghell/EPFD
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 86/100
The gist: A measurement-based approach to EPFD calculation quantifies the impact of satellite mega-constellations on low-frequency radio astronomy by adapting ITU-R EPFD frameworks to real radio telescope…
Key concepts
- Equivalent Power Flux Density (EPFD)
- EPFD is a metric used to measure the impact of unwanted electromagnetic radiation on radio telescopes. It combines the power radiated by a satellite with the antenna gain of the receiving telescope, allowing regulators to set limits on interference levels.
- Forward-Model EPFD Calculation
- This is a theoretical method where scientists predict interference based on simulations, assuming specific satellite emission patterns and telescope characteristics. The paper compares this theoretical prediction to actual measurements taken from real radio telescopes.
- Measurement-Based Estimator
- Instead of relying only on simulations, this approach uses actual data collected by an observatory. It estimates the EPFD by analyzing detected flux densities in specific sky cells and applying the telescope's directional receiving response, offering a direct empirical estimate of interference.
Terminology
Summary
A measurement-based approach to EPFD calculation quantifies the impact of satellite mega-constellations on low-frequency radio astronomy by adapting ITU-R EPFD frameworks to real radio telescope measurement data, which is vital for verifying interference impacts in an evolving regulatory landscape
Context and Aims
Satellite mega-constellations generate Unintended Electro-Magnetic Radiation (UEMR) that impacts low frequency radio astronomy, but enforcement mechanisms are absent in the Radio Regulations (RR) The aim is to adapt compatibility study methods based on satellite constellation simulations, particularly the Equivalent Power FluxDensity (EPFD) framework, to real-world radio telescope measurement data This work addresses conceptual differences between forward-model EPFD calculations and measurement-based approaches, including antenna gain treatment and detection limitations
EPFD Formalism Adaptation
The paper adapts the ITU-R EPFD calculation framework to radio astronomy measurement data obtained from all-sky interferometric imaging It explicitly addresses the conceptual differences between forward-model EPFD calculations and measurement-based approaches, including antenna gain treatment, temporal averaging, and detection limitations The core mathematical formulation for instantaneous EPFD is given by Equation (1) This expression is typically reformulated without the normalization by Gr,max as EPFD0 dBi(ωn) = X Na i=1 Pi Gt,i(θ′ i, φi)Gr(θi, ωn) 4πd 2 i (2)
Measurement-Based Estimation
The methodology is interpreted as a measurement-based estimator of the EPFD quantity defined within the ITU-R framework The estimator may therefore be written as EPFD [0 dBi(ωn) = N Xcells i=1 Φ¯ iGr(θi, ωn), (6) In the idealized case of perfect calibration, complete source detection, exact beam knowledge, negligible thermal noise, and negligible temporal smearing, the expectation value of the estimator converges toward the true EPFD: E h EPFD [0 dBi(ωn) i= EPFD0 dBi(ωn). (7)
Application to All-Sky Data
The application involves accumulating detected flux densities in sky cells and averaging over 2 000 s windows, yielding an average source flux density Φ¯ i for each source cell i The final measurement-based EPFD map is obtained by applying the receive-side directional weighting to these measured fluxes, resulting in Equation (10) which is the form implemented in the present analysis This results in an all-sky measurement-based EPFD map where each output cell represents the aggregate interference level for that pointing direction, including contributions entering through both the main beam and sidelobes
Results and Conclusions
For the nominal analysis using all output sky cells, the XX polarization exceeds the RA.769 threshold in 58. p. 0 2023) that the resulting measurement-based EPFD
distributions exceed the radio astronomy interference threshold levels defined in Recommendation ITU-R RA. 769-2 in approximately
50–70% of samples, depending on polarization and observing subset. 3 to −16. When
the output cells are restricted to elevations above 40◦
, the corresponding margins range from −18. 7%, and 67. These exceedance fractions are far above the 2% single-system criterion in Recommendation ITU-R RA. With this convention,
a positive margin indicates that the 98th percentile lies below
the threshold, while a negative margin indicates that attenuation
is required. The corresponding required uniform attenuation is
A2% = −∆2% when ∆2% < 0.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Proposed Adaptation
All-sky interferometric measurements provide a particularly well-suited starting point for such an adaptation because each pixel in an interferometric image can be interpreted as the output of a synthesized beam pointed in that direction Measurement-based approaches offer a means to assess assumptions related to satellite emission levels, propagation effects, antenna responses, source detectability, and temporal variability using real observational data
Limitations of Verification
Practical limitations include finite integration time of interferometric imaging which causes satellite signals to decorrelate and smear spatially in the reconstructed images Signal-to-noise thresholds introduce selection effects, and temporal smearing reduces the apparent peak brightness of moving emitters, leading to a lower bound on the true interference environment
Future Directions
Measurement-based EPFD products could be used to validate forward models and inform coordination discussions The development of dedicated instrumentation and data processing pipelines is therefore a key component of this effort A hybrid model, in which observational facilities provide the data and processing, while regulatory bodies define the standards and interpretation frameworks, may offer a practical path forward
Discussion
The central result is that all-sky interferometric measurements can be interpreted in a manner compatible with the EPFD formalism This provides an empirical counterpart to the theoretical construct, capturing aggregate behavior of real systems Measurement-based approaches provide a direct empirical estimate of EPFD subject to observational selection effects and instrumental limitations The results provide an initial empirical baseline for UEMR levels in a protected radio astronomy band
Acknowledgements
The authors thank the anonymous referee for constructive comments that improved the manuscript This work was supported by the National Science Foundation grant no.2229428
References
Adhikary, S. 2026, Impact of satellite constellations on the GMRT from the upcoming direct to device services, Tech. p. 0 Astronomy & Astrophysics manuscript no. aa_template ©ESO 2026
September 3, 2026
A measurement-based approach to EPFD calculation, to quantify
the impact of satellite mega-constellations on low-frequency radio
astronomy
Tingay, S.Where the paper says it
Bassa, C. G., Di Vruno, F. p. 0 1
, Winkel, B. p. 0 4, 5
, Grigg, D. 1
, Winkel, B. 4, 5
, Grigg, D. 1
, Winkel, B.Where the paper says it
Where the paper says it
Where the paper says it
Borlaff, A. S., Marcum, P. M., & Howell, S. B. 2025, Nature, 648, 51
Di Vruno, F., Winkel, B., Bassa, C. p. 0 2023; Grigg
et al. 2023; Bassa et al.Where the paper says it
Federal Communications Commission. 2026, Modernizing Spectrum Sharing for Satellite Broadband, Report and Order SB Docket No. p. 0 Astronomy & Astrophysics manuscript no. aa_template ©ESO 2026
September 3, 2026
A measurement-based approach to EPFD calculation, to quantify
the impact of satellite mega-constellations on low-frequency radio
astronomy
Tingay, S.Where the paper says it
Grigg, D., Tingay, S. p. 0 Astronomy & Astrophysics manuscript no. aa_template ©ESO 2026
September 3, 2026
A measurement-based approach to EPFD calculation, to quantify
the impact of satellite mega-constellations on low-frequency radio
astronomy
Tingay, S. Astronomy & Astrophysics manuscript no. aa_template ©ESO 2026
September 3, 2026
A measurement-based approach to EPFD calculation, to quantify
the impact of satellite mega-constellations on low-frequency radio
astronomy
Tingay, S. Astronomy & Astrophysics manuscript no. aa_template ©ESO 2026
September 3, 2026
A measurement-based approach to EPFD calculation, to quantify
the impact of satellite mega-constellations on low-frequency radio
astronomy
Tingay, S. 6
, Di Vruno, F. 7, 8
, and Indermuehle, B9
1
International Centre for Radio Astronomy Research, Curtin University, Bentley, WA, Australia; e-mail:
s. More generally, the term ‘radiation’ is used for any electromagnetic wave, including but not
limited to emissions. Thus, it also applies to topics of ElectroArticle number, page 1 of 13
arXiv:2609.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Grigg, D., Tingay, S. J., & Sokolowski, M. 2025, Astronomy and Astrophysics, 699, A307
Grigg, D., Tingay, S. J., Sokolowski, M., et al. 2023, Astronomy and Astrophysics, 678, L6
Hellbourg, G. 2025, arXiv preprint arXiv:2512. p. 0 More generally, the term ‘radiation’ is used for any electromagnetic wave, including but not
limited to emissions. Thus, it also applies to topics of ElectroArticle number, page 1 of 13
arXiv:2609.Where the paper says it
ITU-R. 2001, Levels of data loss to radio astronomy observations and percentage-of-time criteria, Tech. p. 1 Recommendation ITU-R RA. 1513 complements this by
defining acceptable levels of data loss in radio astronomy observations.Where the paper says it
ITU-R. 2002, Calculation of EPFD from non-GSO systems into radio astronomy, Tech. p. 1 The aim of this paper is to contribute to the closure of some
of these gaps, in order to start to adapt astronomical measurements and measurement systems such that they can be utilised
and understood in an ITU framework. In particular, we consider the calculation of Equivalent
Power Flux Density (EPFD) within the ITU-R framework as
applied to mega-constellations, adapted as a tool for evaluating
impacts on low frequency radio astronomy when considering
UEMR specifically.Where the paper says it
ITU-R. 2003, Protection criteria used for radio astronomical measurements, Tech. p. 2 Gr,max
is the maximum gain of the receive antenna, and di
is the slant
range between the transmit antenna and the receive antenna. Because radio astronomy protection criteria are referenced
to a 0 dBi receive gain, this expression is typically reformulated
without the normalization by Gr,max as
EPFD0 dBi(ωn) =
X
Na
i=1
Pi Gt,i(θ
′
i
, φi)Gr(θi
, ωn)
4πd
2
i
.Where the paper says it
ITU-R. 2007, Interference criteria for radio astronomy used in the calculation of EPFD for non-GSO systems (MSS/RNSS), Tech. p. 1 The Equivalent Power Flux-Density (EPFD)
calculation for radio astronomy as defined by the
ITU-R
2. ITU-R Recommendations and their role in EPFD studies
The evaluation of interference to the Radio Astronomy Service (RAS) within the ITU-R framework relies on a set of
complementary Recommendations that define both the relevant
thresholds and the methodology used to assess compliance.Where the paper says it
Thompson, Moran, S. 2017, Interferometry and Synthesis in Radio Astronomy (Springer)
Wayth, R., Sokolowski, M., Broderick, J., et al. 2021, Journal of Astronomical Telescopes, Instruments, and Systems, 8, 011010
Zhang, X., Zarka, P., Viou, C., et al. 2025, Astronomy and Astrophysics, 698, A244
Summary
The single most informative sentence about the paper's subject and finding is that all-sky interferometric measurements can be interpreted in a manner compatible with the EPFD formalism.
Pruning redundant reasoning tokens
The context establishes that satellite mega-constellations generate Unintended Electro-Magnetic Radiation (UEMR) which impacts low frequency radio astronomy, and the paper aims to adapt EPFD frameworks to real measurement data The authors retain the term UEMR for consistency with existing astronomical literature despite terminology debates within the ITU-R community
How the training signal is built
The EPFD calculation is defined by Equation (1) which accounts for radiated power, transmit antenna gain, and radio telescope gain patterns The transformation from instantaneous EPFD values to regulatory compliance metrics follows a well-defined statistical procedure involving sky cell discretization and averaging over 2 000 s windows The measurement-based estimator is formally written as Equation (6) which uses measured average flux density Φ¯ i and the direction-dependent receiving response Gr(θi, ωn)
Where the gains come from
The key advantage of all-sky imaging is that each pixel in the reconstructed image corresponds to the response of a synthesized beam formed in that direction, providing a natural mapping to the EPFD formalism The measurement-based summation uses Equation (10) which incorporates both main-beam and sidelobe contributions through the synthesized beam response This empirical constraint on aggregate interference is particularly useful for UEMR where forward modeling assumptions are difficult to make
Limitations on the verification of the EPFD calculation via measurement
Verification is subject to important limitations arising from differences between theoretical assumptions and observational reality, such as finite integration time causing signals to smear spatially in reconstructed images Detection incompleteness, temporal smearing, and restricted elevation cuts reduce the recovered aggregate interference power, resulting in a lower bound on the true distribution
Comparison to previous simulations of low frequency UEMR
The measurement-based results are compared to prior EPFD simulations which assumed isotropic UEMR levels and simplified receiving antennas Both the simulation and the present work show a significant exceedance of the ITU-R threshold power by a similar order of magnitude, suggesting reasonable consistency despite different methodologies
Proposed adaptation of the EPFD calculation for measurement data and a suggested instrumentation approach
Measurement-based approaches offer an efficient means to sample the directional interference environment without requiring mechanical scanning or sequential beam steering The output of the pipeline should consist of a reduced set of products directly comparable to the EPFD formalism, including per-cell time-averaged power flux densities and threshold exceedance statistics This framework provides a critical pathway for bridging the gap between regulatory definitions and the observed interference environment
Discussion and conclusions
The need for radio astronomy to describe the impact of UEMR within the framework, language, and terminology of the ITU-R is highlighted The measurement-based EPFD distributions exceed the RA.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Develop a measurement-based EPFD estimator that can be applied to real-world all-sky interferometric imaging data, allowing for an empirical perspective on interference rather than relying solely on forward modeling simulations. This system can provide a
direct empirical estimate of EPFD subject to observational selection effects and instrumental limitations.
-
Implement an automated data processing pipeline capable of performing the necessary steps for measurement-based EPFD estimation, including calibration of instrument response, mapping measurements onto a predefined sky tessellation, and aggregation into temporal windows. This pipeline would generate
per-cell time-averaged power flux densities
andcumulative distribution functions
directly comparable to the ITU-R framework. -
Create a system that can provide actionable information for both satellite operators and regulators by reporting on specific emission characteristics or operational modes associated with elevated UEMR levels. This enables the development of
feedback loops between observation, analysis, and engineering
for mitigation strategies.
Abstract
Context: Satellite mega-constellations generate Unintended Electro-Magnetic Radiation (UEMR) impacting low frequency radio astronomy. The Radio Regulations of the International Telecommunications Union Radiocommunication Sector (ITU-R) contain the basis for addressing UEMR, but enforcement mechanisms are absent. Aims: To adapt compatibility study methods based on satellite constellation simulations, in particular the Equivalent Power Flux-Density (EPFD) framework, to radio telescope measurements. Methods: We adapt the ITU-R EPFD calculation framework to measurement data obtained from all-sky interferometric imaging. We address the conceptual differences between forward-model EPFD calculations and measurement-based approaches. In particular, we consider low frequency systems, which are typically wide field-of-view and interferometric instruments. Results: For the first time, we demonstrate that all-sky interferometric observations enable a direct adaptation of the EPFD formalism to measurement data. We thus confirm previous estimations (Di Vruno et al. 2023) that the resulting measurement-based EPFD distributions exceed the radio astronomy interference threshold levels defined in Recommendation ITU-R RA.769-2 in 50-70% of samples. These exceedance fractions are well above the 2% single-system data-loss criterion in Recommendation ITU-R RA.1513-2. Expressed using the conventional 2% compatibility margin, the corresponding margins are negative, ranging from-18.6 to-16.3 dB, equivalent to a required uniform attenuation of 16.3-18.6 dB. Conclusions: Measurement-based implementations provide a practical pathway toward verification and long-term monitoring at low radio frequencies, which could form an important component of enforceability. We suggest instrumentation approaches to support measurement.
Sources
- Enhanced detection and identification of satellites using an all-sky multi-frequency survey with prototype SKA-Low stations
- Quiet Skies Report: A Primer on Protecting Radio Astronomy in the Age of Satellite Mega-Constellations
Related papers
- On-sky demonstration of a vector Zernike wavefront sensor in a cascaded adaptive optics system
- Euclid Data Release 1 (DR1): Calibration strategy and observations
- The General Antiparticle Spectrometer (GAPS) Antarctic Balloon Payload
- Detection and excision of radio-frequency interference in radio arrays
- Unified matched-filter and excess-power pipeline for gravitational-wave detector characterization
- Ushering in sub-arcsecond angular resolution observatories in the far-infrared: The case for a double-Fourier interferometer