A dual-polarization whitened-template trigger for real-time radio detection of extensive air showers
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Astrophysics. The day in astrophysics: observations, models and what the data forces.
Vera: We're looking at the paper: "A dual-polarization whitened-template trigger for real-time radio detection of extensive air showers".
Jocelyn: Here's the gist of the paper. A dual-polarization whitened-template trigger for real-time radio detection of extensive air showers presents a compact, continuously operating first-stage FPGA trigger that combines short pulse morphology with measured background covariance and dual-polarization consistency to reject radio background while preserving weak extensive air shower pulses Trigger Mechanism and Design The core of the trigger is a short whitened pulse template evaluated on orthogonal north–south and east–west high-gain channels provided by the two crossed butterfly antennas of an Auger Engineering Radio Array station The template is derived from detector-folded air-shower pulses and whitened with the covariance of measured background from the same station A streaming score scans both polarization channels with the same 16-sample finite-impulse-response template and combines responses within a fixed timing radius The operating threshold is calibrated on a dedicated calibration set to a frame-equivalent candidate rate of 3.57 kHz, chosen as 5% of the 71.4 kHz service capacity of a downstream module The implementation uses Vitis and Vivado and achieves an initiation interval of one clock cycle, sustaining one new dual-polarization sample per clock without trigger-induced deadtime Data Construction and Template Learning The trigger is developed using dual-polarization high-gain ADC traces from one Auger Engineering Radio Array (AERA) station The background class is drawn from measured high-gain noise traces recorded by this station with the standard AERA firmware The pure-signal cosmic-ray library is based on CoREAS/CORSIKA air-shower simulations produced within the Pierre Auger Collaboration for the energy-scale studies of AERA For each measured event, one proton- and one iron-induced air shower were simulated using the reconstructed shower geometry and calorimetric energy as input to CoREAS/CORSIKA A signal event is then constructed by injecting the two detector-folded polarization traces into the corresponding measured background channels at a random allowed time The template is learned offline from pure-signal snippets and measured background traces The whitening uses measured background traces from the training split to estimate lag covariance, which is then converted into an L × L Toeplitz covariance matrix Performance and Validation Results The performance on the finite benchmark shows that the trigger reaches an efficiency of 0.97 (95% confidence interval 0.96–0.98) at 3.39 kHz (2.68–4.23 kHz) The raw dual-polarization template sum reaches 0.41, and the absolute-amplitude trigger reaches 0.16 The proposed trigger retains efficiencies between 0.94 and 1.00 across the sampled signal-strength range A native 159.29 ms continuous replay measures an average score-cluster rate of 6.64 kHz, with a maximum per-record rate of 11.87 kHz Physical Interpretation and Robustness The discriminating information comes from the short pulse morphology after whitening by measured background covariance, together with a local consistency requirement between the two high-gain channels The trigger is not simply increasing all responses; it is making pulse-like paired responses rare in background and common in signal The ablation study shows that the learned template and its time reversal have similar efficiency because the score uses an absolute sliding matched-filter response The frequency-domain diagnostics show that the learned FIR does not concentrate its response on a single narrow spectral feature Taken together, the diagnostics give a consistent conclusion: the selected trigger improves over amplitude and unwhitened-template references by combining short pulse morphology, measured-background whitening, and two-channel local consistency in a firmware-small datapath Hardware Implementation Feasibility The final implementation targets an xc7z020-clg400-1 device using Vitis HLS and Vivado 2024.1 The generated design reaches an initiation interval of one clock cycle, sustaining one new dual-polarization sample per clock without trigger-induced deadtime The HLS latency is approximately one frame plus the local pipeline depth, and the datapath contains no floatingpoint operation, no division, and no adaptive filtering The vectorless 0.310W power estimate is an order-of-magnitude value requiring activity-based refinement The paper concludes that covariance-aware pulse morphology and dual-polarization consistency can be implemented as a compact first-stage trigger operating continuously at the ADC sample rate The native replay confirms continuous operation in the presence of correlated disturbances and background bursts A natural next step is evaluation across stations with heterogeneous noise environments, together with online adjustment of the operating threshold to maintain a stable accidental-trigger rate under changing conditions The firmware path demonstrates feasibility and establishes that this combination provides an efficient and interpretable real-time trigger architecture Acknowledgments The authors gratefully acknowledge the support of the Electronics Laboratory of the Department Physik at Universität Siegen for assistance with the experimental electronics, laboratory infrastructure, and hardware-oriented validation work We acknowledge the Pierre Auger Collaboration for providing access to the measured Auger Engineering Radio Array background data and for the simulation and detector-response tools used in the broader radio-trigger development programme We particularly thank the Auger Radio Management Team for facilitating access to the radio data used in this study We also acknowledge the developers and maintainers of the opensource software used throughout this work, including Python, NumPy, SciPy, scikit-learn, Matplotlib, cocotb, GHDL, Vitis HLS, and Vivado References
1: T.
Vera: Huege Radio detection of cosmic ray air showers in the digital era Phys.
Jocelyn: Rep.
Vera: 620 (2016) 1
2: F.G.
Paper summary: Vera: To recap, this paper introduces a dual-polarization whitened-template trigger for real time radio detection of extensive air showers, focusing on using measured background covariance and dual polarization consistency to reject noise while preserving weak pulses <ref:2608.19898#pg1>.
Jocelyn: The thesis is that this method uses a short pulse template derived from detector folded air shower pulses, which they then whiten using the covariance of measured background data from the same station <ref:2608.19898#pg1>.
Subrahmanyan: They are essentially combining short pulse morphology with measured background whitening and dual polarization consistency to make pulse like paired responses rare in background and common in signal <ref:2608.19898#pg3>.
Vera: The results show that on the finite benchmark, this trigger reaches an efficiency of zero point nine seven at three point three nine kilo hertz, which is within a reasonable range compared to the tested rates between two point six eight and four point two three kilo hertz <ref:2608.19898#pg2>.
Jocelyn: And they also found that the raw dual polarization template sum reaches zero point four one, and the absolute amplitude trigger reaches zero point one six <ref:2608.19898#pg2>.
Subrahmanyan: The paper states that this proposed trigger retains efficiencies between zero point nine four and one point zero across the sampled signal strength range, which is a solid result when you consider what they are trying to achieve in terms of preserving sensitivity <ref:2608.19898#pg2>.
Vera: It seems like they’ve managed to show that this combination of factors—the pulse shape, the background whitening, and the local dual-polarization consistency—is better than using just amplitude or unwhitened templates <ref:2608.19898#pg3>.
Jocelyn: And they confirm that in frequency domain diagnostics, the learned finite impulse response does not concentrate its response on a single narrow spectral feature, which suggests it’s a more robust way to discriminate signals <ref:2608.19898#pg3>.
Subrahmanyan: The hardware feasibility is also addressed; they target an xc7z020 clg400 one device using Vitis HLS and Vivado two thousand twenty-four point one, and the design achieves an initiation interval of one clock cycle <ref:2608.19898#pg2>.
Vera: That’s a very compact implementation estimate; they estimate the power to be around zero point three one watt, which is an order of magnitude value that they say requires activity based refinement <ref:2608.19898#pg2>.
Jocelyn: So, the main thing we need to take away from this paper is that covariance aware pulse morphology and dual polarization consistency can be implemented as a compact first stage trigger operating continuously at the ADC sample rate <ref:2608.19898#pg2>.
Subrahmanyan: And they confirm that their native replay measures an average score cluster rate of six point six four kilo hertz, with a maximum per record rate of eleven point eight seven kilo hertz, which shows continuous operation in the presence of correlated disturbances and background bursts <ref:2608.19898#pg2>.
Conclusion: Vera: So looking at the title and authors, "A dual-polarization whitened-template trigger for real time radio detection of extensive air showers," it really sums up the entire effort. It’s about creating a trigger that is dual polarization aware and uses whitening based on templates to detect air showers in real time <ref:2608.19898#pg1>.
Jocelyn: The implication here is that you can get a very fast, continuous detection system right at the source, which means you’re not waiting for a huge downstream system to process everything and then filtering it later <ref:2608.19898#pg2>.
Subrahmanyan: It suggests that if we want to look for neutrinos or other faint cosmic ray signals, having this compact first stage trigger operating continuously in the field is really important for gathering the data we need to constrain cosmological models <ref:2608.19898#pg3>.
Vera: What this paper really means is that combining short pulse shape with measured background covariance and dual polarization consistency can be reduced to a compact single template trigger that operates continuously at one sample per clock <ref:2608.19898#pg2>.
Jocelyn: It’s about making sure we’re not just increasing all the responses, but actively making pulse like paired responses rare in background and common in signal <ref:2608.19898#pg3>.
Subrahmanyan: The authors are setting up a clear path forward by demonstrating that this combination improves over amplitude and unwhitened template references by using this specific technique <ref:2608.19898#pg3>.
Vera: And the next step they suggest is evaluating this across stations with different noise environments, along with online adjustment of the operating threshold to keep the accidental trigger rate stable under changing conditions <ref:2608.19898#pg2>.
Jocelyn: So, it’s not just about getting a high number on a benchmark; it’s about building an interpretable real time trigger architecture that works continuously in messy real world data <ref:2608.19898#pg2>.
Qader Dorostib, Alperen Aksoya, Ilja Bekmana, Markus Cristinzianib, Eric-Teunis de Booneb, Vesselin Dimitrova, Chimezie Eguzoa, Stefan Heidbrinkc, Stefan van Waasena, Andre Zambaninia
Peter Grünberg Institute – Integrated Computing Architectures (ICA, PGI-4) · Center for Particle Physics Siegen, Department Physik, Universität Siegen, Germany · Elektronikentwicklungslabor, Department Physik, Universität Siegen, Germany · Faculty of Engineering, Communication Systems, University of Duisburg-Essen
astro-ph.IM
Submitted: 2026-08-20
Updated: 2026-11-02
Comments: 34 pages, 17 figures, and 6 tables. Corresponding author: Qader Dorosti
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 92/100
The gist: A dual-polarization whitened-template trigger for real-time radio detection of extensive air showers presents a compact…
Key concepts
- Dual-Polarization Whitened Template
- This is a specific trigger mechanism that uses two orthogonal polarization channels (north-south and east-west) to create a short pulse shape template. This template is 'whitened' by using the measured background noise covariance, which helps distinguish true air shower pulses from random background interference.
- Background Covariance
- This refers to a mathematical measure derived from recorded noise traces that describes how the background signal varies over time and across different detector channels. By incorporating this covariance into the template evaluation, the trigger can statistically filter out expected noise patterns while remaining sensitive to air shower signals.
- Dual-Polarization Consistency
- This is a requirement that two separate polarization channels must show consistent responses within a specific timing window. The trigger uses this consistency check as a powerful discriminator; true air shower pulses are expected to exhibit this paired response, whereas random background events are unlikely to meet this strict local timing criterion.
Terminology
Summary
A dual-polarization whitened-template trigger for real-time radio detection of extensive air showers presents a compact, continuously operating first-stage FPGA trigger that combines short pulse morphology with measured background covariance and dual-polarization consistency to reject radio background while preserving weak extensive air shower pulses
Trigger Mechanism and Design
The core of the trigger is a short whitened pulse template evaluated on orthogonal north–south and east–west high-gain channels provided by the two crossed butterfly antennas of an Auger Engineering Radio Array station The template is derived from detector-folded air-shower pulses and whitened with the covariance of measured background from the same station A streaming score scans both polarization channels with the same 16-sample finite-impulse-response template and combines responses within a fixed timing radius The operating threshold is calibrated on a dedicated calibration set to a frame-equivalent candidate rate of 3.57 kHz, chosen as 5% of the 71. p. 04 kHz service capacity of a downstream module The implementation uses Vitis and Vivado and achieves an initiation interval of one clock cycle, sustaining one new dual-polarization sample per clock without trigger-induced deadtime
Data Construction and Template Learning
The trigger is developed using dual-polarization high-gain ADC traces from one Auger Engineering Radio Array (AERA) station The background class is drawn from measured high-gain noise traces recorded by this station with the standard AERA firmware The pure-signal cosmic-ray library is based on CoREAS/CORSIKA air-shower simulations produced within the Pierre Auger Collaboration for the energy-scale studies of AERA For each measured event, one proton- and one iron-induced air shower were simulated using the reconstructed shower geometry and calorimetric energy as input to CoREAS/CORSIKA A signal event is then constructed by injecting the two detector-folded polarization traces into the corresponding measured background channels at a random allowed time The template is learned offline from pure-signal snippets and measured background traces The whitening uses measured background traces from the training split to estimate lag covariance, which is then converted into an L × L Toeplitz covariance matrix
Performance and Validation Results
The performance on the finite benchmark shows that the trigger reaches an efficiency of 0.97 (95% confidence interval 0. p. 096–0.98) at 3.39 kHz (2.68–4.23 kHz) The raw dual-polarization template sum reaches 0. p. 041, and the absolute-amplitude trigger reaches 0. p. 016 The proposed trigger retains efficiencies between 0. p. 094 and 1.00 across the sampled signal-strength range A native 159. p. 629 ms continuous replay measures an average score-cluster rate of 6. p. 764 kHz, with a maximum per-record rate of 11. p. 187 kHz
Physical Interpretation and Robustness
The discriminating information comes from the short pulse morphology after whitening by measured background covariance, together with a local consistency requirement between the two high-gain channels The trigger is not simply increasing all responses; it is making pulse-like paired responses rare in background and common in signal The ablation study shows that the learned template and its time reversal have similar efficiency because the score uses an absolute sliding matched-filter response The frequency-domain diagnostics show that the learned FIR does not concentrate its response on a single narrow spectral feature Taken together, the diagnostics give a consistent conclusion: the selected trigger improves over amplitude and unwhitened-template references by combining short pulse morphology, measured-background whitening, and two-channel local consistency in a firmware-small datapath
Hardware Implementation Feasibility
The final implementation targets an xc7z020-clg400-1 device using Vitis HLS and Vivado 2024.1 The generated design reaches an initiation interval of one clock cycle, sustaining one new dual-polarization sample per clock without trigger-induced deadtime The HLS latency is approximately one frame plus the local pipeline depth, and the datapath contains no floatingpoint operation, no division, and no adaptive filtering The vectorless 0. p. 1310W power estimate is an order-of-magnitude value requiring activity-based refinement
Conclusion and Outlook
The paper concludes that covariance-aware pulse morphology and dual-polarization consistency can be implemented as a compact first-stage trigger operating continuously at the ADC sample rate The native replay confirms continuous operation in the presence of correlated disturbances and background bursts A natural next step is evaluation across stations with heterogeneous noise environments, together with online adjustment of the operating threshold to maintain a stable accidental-trigger rate under changing conditions The firmware path demonstrates feasibility and establishes that this combination provides an efficient and interpretable real-time trigger architecture
Acknowledgments
The authors gratefully acknowledge the support of the Electronics Laboratory of the Department Physik at Universität Siegen for assistance with the experimental electronics, laboratory infrastructure, and hardware-oriented validation work We acknowledge the Pierre Auger Collaboration for providing access to the measured Auger Engineering Radio Array background data and for the simulation and detector-response tools used in the broader radio-trigger development programme We particularly thank the Auger Radio Management Team for facilitating access to the radio data used in this study We also acknowledge the developers and maintainers of the opensource software used throughout this work, including Python, NumPy, SciPy, scikit-learn, Matplotlib, cocotb, GHDL, Vitis HLS, and Vivado
References
[1] T. Huege Radio detection of cosmic ray air showers in the digital era Phys. p. 1 Rep. 620 (2016) 1
[2] F.G. Schröder Radio detection of cosmic-ray air showers and high-energy neutrinos Prog. p. 1 Part. Nucl. Phys. 93 (2017) 1
[3] F. D. Kahn and I. Lerche Radiation from cosmic ray air showers Proc. p. 1 R Soc Lond A 289 (1966) 206
[4] E. Conti and G. Sartori On the coherent emission of radio frequency radiation from high energy particle showers Int J Mod Phys D 26 (2017) 1750083
[5] Pierre Auger collaboration A Abdul Halim et al Radio measurements of the depth of air-shower maximum at the Pierre Auger Observatory Phys. Rev. D. 109 (2024) 022002
[6] Pierre Auger collaboration A Aab et al Energy estimation of cosmic rays with the Engineering Radio Array of the Pierre Auger Observatory Phys. Rev. D. 93 (2016) 122005
[7] Pierre Auger collaboration A Aab et al The Pierre Auger Cosmic Ray Observatory Nucl. Instrum. Meth. A 798 (2015) 172
[8] A Schmidt Realization of a self-triggered detector for the radio emission of cosmic rays Ph.D thesis Karlsruher Institut für Technologie (KIT) 2011 10.5445/IR/1000030957
[9] CODALEMA collaboration D Torres Machado et al Latest results of the CODALEMA experiment cosmic rays radio detection in a self trigger mode J Phys Conf Ser. 409 (2013) 012074
[10] J L Kelley for the Pierre Auger Collaboration Data acquisition triggering and filtering at the Auger Engineering Radio Array Nucl. Instrum. Methods Phys Res A 725 (2013) 133
[11] GRAND collaboration P Correa et al Development of an autonomous detection-unit self-trigger for GRAND Proc PoS(ARENA2024) (2024) 060
[12] P Correa et al Development of an autonomous detection-unit self-trigger for GRAND arXiv:2409.01026 (2024)
[13] P Giri et al ARA-Next a new DAQ and trigger architecture for the Askaryan Radio Array arXiv:2409.07634 (2024)
[14] R Camphyn Offline neutrino filtering using a convolutional neural network-based algorithm at the Radio Neutrino Observatory Greenland arXiv:2508.13860 (2025)
[15] Q Dorosti AI-enhanced self-triggering for extensive air showers performance and FPGA feasibility JINST 20 (2025) P10010 arXiv:2608.19898
[16] A Aksoy et al Hybrid neural denoising for resource-efficient nearand sub-threshold radio triggering of extensive air showers arXiv:2605.28332 (2026)
[17] A Aksoy et al Quantization Effects of Artificial Neural Networks for Embedded Edge-Computing Applications arXiv:2511.05479 (2026)
[18] M Ravn et al Likelihood-reconstruction for radio detectors of cosmic rays and neutrinos PoS(ICRC2025) 271 arXiv:2510.21925
[19] B Fuchs for the Pierre Auger Collaboration The Auger Engineering Radio Array Nucl. Instrum. Meth.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Faster real-time detection of extensive air showers by reducing latency to one clock cycle, sustaining
one new dual-polarization sample per clock without trigger-induced deadtime.
This allows for immediate processing in field hardware like FPGAs. -
Improved background rejection using a physics-informed, covariance aware trigger method that combines
short pulse templates with the timing consistency of the two orthogonal antenna polarizations.
This rejects events based onpulse morphology after whitening by measured background covariance,
which is superior to simple amplitude or energy summaries. -
Enhanced signal recovery in weak signals by utilizing a score that is
not simply increasing all responses; it is making pulse-like paired responses rare in background and common in signal.
This allows the system to retainweak radio pulses
that do not dominate raw peak amplitude, improving sensitivity across the SNR range. -
Optimized hardware deployment through a
hardware aware hyperparameter optimisation (HPO)
procedure that selects architectures by minimizing themultiplier count
while meeting efficiency requirements. This ensures the final design is asmallest model that exceeds the required efficiency at the common 1% backgroundframe acceptance.
-
More robust continuous operation by demonstrating that correlated background disturbances can produce multiple score excursions, and confirming that even under varying noise conditions, a native replay maintains high efficiency below the full service capacity. This confirms
robustness to the varying noise conditions and transient disturbances observed at the station.
Sources
- Development of an Autonomous Detection-Unit Self-Trigger for GRAND
- ARA-Next: a new DAQ and trigger architecture for the Askaryan Radio Array
- Offline Neutrino Filtering using a Convolutional Neural Network-Based Algorithm at the Radio Neutrino Observatory Greenland
- AI-Enhanced Self-Triggering for Extensive Air Showers: Performance and FPGA Feasibility
- Hybrid neural denoising for resource-efficient near- and sub-threshold radio triggering of extensive air showers
- Quantization Effects of Artificial Neural Networks for Embedded Edge-Computing Applications
- Likelihood Reconstruction for Radio Detectors of Neutrinos and Cosmic Rays
Related papers
- On-sky demonstration of a vector Zernike wavefront sensor in a cascaded adaptive optics system
- Euclid Data Release 1 (DR1): Calibration strategy and observations
- The General Antiparticle Spectrometer (GAPS) Antarctic Balloon Payload
- Detection and excision of radio-frequency interference in radio arrays
- Unified matched-filter and excess-power pipeline for gravitational-wave detector characterization
- Ushering in sub-arcsecond angular resolution observatories in the far-infrared: The case for a double-Fourier interferometer