Undulating Diamond Photonic Crystal in the Royal Jewel Butterfly: Circumventing Refractive Index Limits to Defy Iridescence

arXiv:2608.08540 · physics.optics · Submitted 2026-08-09 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Undulating Diamond Photonic Crystal in the Royal Jewel Butterfly".

Mira: Here's the gist of the paper. Structural colouration with narrow spectral photonic bandwidth and high reflectivity is of critical importance for modern optical applications, including displays, laser systems, and optical sensing <ref:2608.08540#pg2> Achieving such angle-independent colouration typically relies on polycrystalline or inherent structural disorder <ref:2608.08540#pg4> Herein, we uncover the structural origin of the spectacular bright, angle-independent blue colouration of Hypochrysops polycletus, a sapphire-like Royal Jewel butterfly <ref:2608.08540#pg3> Three-dimensional (3D) electron microscopy reveals that the dorsal wing scale has a single diamond structure, a 3D photonic crystal previously documented only in beetles and weevils <ref:2608.08540#pg2> The crystal domains form an extraordinary quasi-sinusoidal surface geometry with a distinct template morphology-guided arrangement <ref:2608.08540#pg4> Its optical response is dominated by the fundamental stopband, with two dominant scattering mechanisms: specular reflection at the 111 inclined sidewalls of the hierarchical structure, and funnelling into localised quasi-normal modes enabled by a strongly anisotropic Bloch transport <ref:2608.08540#pg3> By mimicking these features with two-photon polymerisation, we artificially reproduced the optical response in the infrared region <ref:2608.08540#pg4> The study opens a pathway towards bioinspired brilliant diffuse colouration and angle-robust photonic devices <ref:2608.08540#pg2>.

Kai: Structural Discovery The research reveals that the blue colouration of the Royal Jewel butterfly originates from a single diamond structure, a 3D photonic crystal previously documented only in beetles and weevils <ref:2608.08540#pg3> This discovery challenges the long-standing notion that the SD is typically associated with beetles and weevils, while it has not been found in butterflies to date <ref:2608.08540#pg4> The structure is hierarchically integrated into an undulating scale skeleton, giving rise to a previously unrecognized photonic architecture <ref:2608.08540#pg4>.

Mira: Optical Characterization To quantitatively characterize this unique optical behaviour, the study performed two types of angle-resolved micro-spectroscopy (ARMS) measurements on the dorsal wing <ref:2608.08540#pg4> In the diffuse illumination measurement, the reflection intensity remains consistently high across a broad angular range of 0-40°, decreases at steeper angles between 40° and 70°, and stays stable when tilting along the longitudinal axis <ref:2608.08540#pg4> Under directional illumination, along the longitudinal axis of the wing scale, the reflectance exhibits an excellent angular stability, with only a slight drop of reflectance at large incident and reflection angles <ref:2608.08540#pg4>.

Kai: Geometric Modeling The authors investigated the nanoscale structural origin by using serial block-face scanning electron microscopy (SBF-SEM) tomography to resolve the hierarchical organisation <ref:2608.08540#pg4> The reconstructed volume clearly identifies ridges running parallel across the scale and quasi-sinusoidal undulations oriented perpendicular to the ridges and the basal lamina <ref:2608.08540#pg4> These undulations are bounded by a saddle-shaped surface closely resembling the diamond constant mean curvature family <ref:2608.08540#pg4>.

Paper summary: Kai: So we’ve talked about what this paper is aiming for, which is figuring out how a butterfly gets such bright, angle-independent blue color using only a diamond structure and its specific surface geometry. They are uncovering the structural origin of this color in *Hypochrysops polycletus*.

Mira: The thesis here is that achieving that angle independence usually requires either polycrystalline structures or some form of inherent structural disorder, but the authors found this butterfly uses a single diamond structure arranged in an extraordinary quasi-sinusoidal surface geometry.

Lev: That sounds like they’re bypassing the usual need for complex periodic patterns by using curvature and arrangement instead. If you only have that single diamond structure, how does it manage to scatter light so effectively across such a wide angle?

Kai: The paper explains that this design contains only three or four unit cells in the direction of propagation, which is less than what we usually see in thicker biophotonic structures that support multiple high symmetry stopbands.

Mira: Because they keep it simple structurally, the optical response is dominated by just the fundamental stopband, and they identify two dominant scattering mechanisms: specular reflection at sidewalls for domains with a vertical one-one-one orientation and funnelling into localized quasi normal modes enabled by an anisotropic Bloch transport.

Lev: So, the physics is very tightly coupled to the orientation of those individual diamond domains. If you mess up that orientation, you lose that specific scattering pathway entirely, right?

Kai: Right. And they link this to geometric modeling using serial block face scanning electron microscopy tomography, which revealed ridges running parallel across the scale and quasi-sinusoidal undulations oriented perpendicular to those ridges and the basal lamina.

Mira: These undulations are bounded by a surface that closely resembles the diamond constant mean curvature family, which helps define that quasi-sinusoidal arrangement they described. It’s a template morphology guided arrangement.

Lev: So, it’s not just random disorder; there's an underlying physical guide dictating the shape of the structure at every scale, which is a much harder thing to engineer.

Kai: That’s the key finding: this specific hierarchical integration across multiple length scales allows them to use limited components to achieve that angle robustness. It’s about using limited components in a smart way.

Mira: This has implications for us because it shows that evolution finds solutions even with low refractive index materials, by integrating optical structures at different length scales across the scale.

Lev: For real hardware, it means we need to focus less on achieving massive periodic arrays and more on precise, hierarchical control over local geometry to get that desired optical function.

Kai: That’s what I'm thinking. And they validated their findings by using angle resolved micro spectroscopy measurements on the dorsal wing, showing consistent high reflection across a broad range of zero to forty degrees in diffuse illumination.

Mira: The results showed excellent angular stability under directional illumination along the longitudinal axis, with only a slight drop in reflectance at larger incident and reflection angles. That’s what they claimed for this angle-independent coloration.

Lev: If we translate that into a device, we need to make sure the fabrication process preserves that specific geometry precisely enough to maintain that angular stability.

Kai: So it’s about translating the biological template into a manufacturable form while keeping those crucial geometric features intact.

Conclusion: Kai: Looking at the full title, "Undulating Diamond Photonic Crystal in the Royal Jewel Butterfly: Circumventing Refractive Index Limits to Defy Iridescence," it really captures the essence of what this research is about—using a specific shape to overcome material limitations.

Mira: It’s essentially saying that you don't need a high refractive index material or massive periodicity to get brilliant color; you can use this hierarchical, quasi-sinusoidal arrangement instead. It’s about finding an alternative path in photonic design.

Lev: So the implication for us is that we should look at how we can design structures that leverage local geometric features rather than just relying on bulk material properties to achieve optical effects.

Kai: I think the real shift here is moving toward bioinspired designs where the structure itself dictates the light interaction, instead of just trying to force a specific wavelength through a simple periodic lattice.

Mira: It opens up avenues for designing optical devices that are more robust against variations in material properties, which is something we desperately need when building systems that need to be stable.

Lev: For real hardware, it means focusing on controlling the local geometry precisely enough so that the scattering mechanism remains dominant regardless of minor fluctuations in the environment.

Kai: So essentially, this paper shows a way to use simple materials in a complex, layered arrangement to achieve high-performance optical results that are resilient across different angles.

Mira: It’s about finding functional solutions where conventional methods hit a wall due to material constraints, and nature found one using geometry.

Lev: I think the focus should be on that geometric control, because it’s what gives the structure its resilience against external perturbations.

School of Chemical Science and Engineering, Tongji University Shanghai 200092 China · State Key Laboratory of Molecular Engineering of Polymers Department of Macromolecular Science Fudan University Shanghai 200438 China · Institute of Mathematical Sciences ShanghaiTech University 393 Middle Huaxia Road Shanghai 201210 China · State Key Laboratory of Metal Matrix Composite School of Materials Science and Engineering Shanghai Jiao Tong University Shanghai 200240 China · Adolphe Merkle Institute University of Fribourg Fribourg Switzerland · NCCR Bio-inspired Materials University of Fribourg Fribourg Switzerland · Key Laboratory of Advanced Civil Engineering Materials of the Ministry of Education School of Materials Science and Engineering Tongji University Shanghai 201804 China · Hubei Key Laboratory of Biomass Fibers and Eco-dyeing & Finishing School of Textile Science and Engineering Wuhan Textile University Wuhan 430200 China · Laboratory of Low-Dimensional Materials Chemistry Key Laboratory for Ultrafine Materials of Ministry of Education School of Materials Science and Engineering East China University of Science and Technology Shanghai 200237 China

physics.optics

Submitted: 2026-08-09

Updated: 2026-11-06

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 87/100

The gist: Structural colouration with narrow spectral photonic bandwidth and high reflectivity is of critical importance for modern optical applications, including displays, laser systems…

Key concepts

Structural Colouration
This is the phenomenon where materials appear colored due to their internal structure, not pigments. It relies on how light interacts with periodic or disordered nanoscale patterns. In this case, the butterfly's structure dictates the specific blue color observed.
3D Photonic Crystal
A 3D photonic crystal is a material with a highly ordered, repeating three-dimensional arrangement of nanostructures. These structures control how light reflects and scatters based on their size and spacing. The butterfly wing scale acts as such a crystal, creating specific optical properties.
Angle-Independent Colouration
This means the color remains consistent regardless of the viewing angle or the direction the light hits it. This property is achieved by having a structure that scatters light effectively across a broad range of angles, rather than just reflecting it at one specific angle.

Terminology

Summary

Structural colouration with narrow spectral photonic bandwidth and high reflectivity is of critical importance for modern optical applications, including displays, laser systems, and optical sensing <ref:2608. p. 108540#pg2> Achieving such angle-independent colouration typically relies on polycrystalline or inherent structural disorder <ref:2608. p. 108540#pg4> Herein, we uncover the structural origin of the spectacular bright, angle-independent blue colouration of Hypochrysops polycletus, a sapphire-like Royal Jewel butterfly <ref:2608. p. 108540#pg3> Three-dimensional (3D) electron microscopy reveals that the dorsal wing scale has a single diamond structure, a 3D photonic crystal previously documented only in beetles and weevils <ref:2608. p. 108540#pg2> The crystal domains form an extraordinary quasi-sinusoidal surface geometry with a distinct template morphology-guided arrangement <ref:2608. p. 108540#pg4> Its optical response is dominated by the fundamental stopband, with two dominant scattering mechanisms: specular reflection at the 111 inclined sidewalls of the hierarchical structure, and funnelling into localised quasi-normal modes enabled by a strongly anisotropic Bloch transport <ref:2608. p. 108540#pg3> By mimicking these features with two-photon polymerisation, we artificially reproduced the optical response in the infrared region <ref:2608. p. 108540#pg4> The study opens a pathway towards bioinspired brilliant diffuse colouration and angle-robust photonic devices <ref:2608. p. 108540#pg2>.

Structural Discovery

The research reveals that the blue colouration of the Royal Jewel butterfly originates from a single diamond structure, a 3D photonic crystal previously documented only in beetles and weevils <ref:2608.08540#pg3> This discovery challenges the long-standing notion that the SD is typically associated with beetles and weevils, while it has not been found in butterflies to date <ref:2608. p. 308540#pg4> The structure is hierarchically integrated into an undulating scale skeleton, giving rise to a previously unrecognized photonic architecture <ref:2608. p. 308540#pg4>.

Optical Characterization

To quantitatively characterize this unique optical behaviour, the study performed two types of angle-resolved micro-spectroscopy (ARMS) measurements on the dorsal wing <ref:2608.08540#pg4> In the diffuse illumination measurement, the reflection intensity remains consistently high across a broad angular range of 0-40°, decreases at steeper angles between 40° and 70°, and stays stable when tilting along the longitudinal axis <ref:2608. p. 308540#pg4> Under directional illumination, along the longitudinal axis of the wing scale, the reflectance exhibits an excellent angular stability, with only a slight drop of reflectance at large incident and reflection angles <ref:2608. p. 408540#pg4>.

Geometric Modeling

The authors investigated the nanoscale structural origin by using serial block-face scanning electron microscopy (SBF-SEM) tomography to resolve the hierarchical organisation <ref:2608.08540#pg4> The reconstructed volume clearly identifies ridges running parallel across the scale and quasi-sinusoidal undulations oriented perpendicular to the ridges and the basal lamina <ref:2608. p. 708540#pg4> These undulations are bounded by a saddle-shaped surface closely resembling the diamond constant mean curvature family <ref:2608. p. 808540#pg4>.

Mechanism of Colouration

The angle-independent colouration is caused by the hierarchical geometry of the quasi-sinusoidal superstructure in conjunction with the diamond nanostructure <ref:2608.08540#pg2> The light scattering mechanism involves specular reflection at 20° tilted sidewalls for domains with vertical [211] orientation, while high-angle response is through specular reflection at sidewalls for domains near [110] <ref:2608. p. 108540#pg4>. This allows the butterfly to optimise reflection across a wide range of angles with limited refractive index <ref:2608. p. 308540#pg2>.

Biomimetic Application

The study demonstrates a viable experimental route toward biomimetic implementation of the proposed scattering mechanisms by fabricating scale-up artificial models using two-photon polymerisation <ref:2608.08540#pg4> The fabricated models produced optical responses that matched theoretical predictions, thereby demonstrating a viable experimental route toward biomimetic implementation of the proposed scattering mechanisms <ref:2608.08540#pg2>.

Evolutionary Context

The SD structure in the Royal Jewel butterfly stands out as an exception and exclusive butterfly case, presenting the first discovery of SD in butterflies <ref:2608.08540#pg4> This likely reflects an independent evolutionary trajectory distinct from the conventional SG butterfly such as C. p. 2 rubi with dominated green color <ref:2608. p. 108540#pg2>. The structure is suggested to have formed through nucleation and restricted growth, guided by the underlying basal lamina which acts as a directional template <ref:2608. p. 108540#pg4>.

Data Verification

The data were validated through multiple methods, including optical ARMS measurements and FT-IR tests on artificially constructed structures <ref:2608.08540#pg4> The results underscore the ingenuity of biological systems in achieving seemingly impossible functions with only a limited set of components <ref:2608. p. 208540#pg2>.

References

  1. Li, Y.Z., et al., Structural origin of the brown color of barbules in male peacock tail feathers <ref:2608.08540#pg2>

  2. Vigneron, J.P., et al., Structural origin of the colored reflections from the black-billed magpie feathers <ref:2608. p. 108540#pg2>

  3. Prum, R.O., Two-dimensional Fourier analysis of the spongy medullary keratin of structurally coloured feather barbs <ref:2608.08540#pg2>

  4. Prum, R.O., Structural colouration of avian skin: convergent evolution of coherently scattering dermal collagen arrays <ref:2608.08540#pg2>

  5. Mathger, L.M., Rapid colour changes in multilayer reflecting stripes in the paradise whiptail <ref:2608.08540#pg2>

  6. Oshima, N. and R. Fujii, Motile mechanism of blue damselfish (Chrysiptera cyanea) iridophores <ref:2608.08540#pg2>

  7. Cai, C., et al., Structural colours in diverse Mesozoic insects <ref:2608. p. 208540#pg2>

  8. Liu, F., et al., Structural color change in longhorn beetles Tmesisternus isabellae <ref:2608. p. 108540#pg2>

  9. Pouya, C., D.G. Stavenga, and P. Vukusic, Discovery of ordered and quasi-ordered photonic crystal structures in the scales of the beetle Eupholus magnificus <ref:2608. p. 808540#pg2>

  10. Welch, V., et al., Orange reflection from a three-dimensional photonic crystal in the scales of the weevil Pachyrrhynchus congestus pavonius(Curculionidae) <ref:2608. p. 108540#pg2>

  11. Wilts, B.D. and V. Saranathan, A Literal Elytral Rainbow: Tunable Structural Colors Using Single Diamond Biophotonic Crystals in Pachyrrhynchus congestus Weevils <ref:2608. p. 1 p. 108540#pg2>

  12. Vynck, K., et al., Light in correlated disordered media <ref:2608. p. 208540#pg2>

  13. Vukusic, P. and J.R. Sambles, Photonic structures in biology <ref:2608. p. 208540#pg2>

  14. Xiong, R., et al., Biopolymeric photonic structures: design, fabrication, and emerging applications <ref:2608. p. 108540#pg2>

  15. Vukusic, P., J.R. Sambles, and C.R. Lawrence, Colour mixing in wing scales of a butterfly <ref:2608. p. 208540#pg2>

  16. Agez, G., C. Bayon, and M. Mitov, Multiwavelength micromirrors in the cuticle of scarab beetle Chrysina gloriosa <ref:2608. p. 208540#pg2>

  17. Sharma, V., et al., Structural Origin of Circularly Polarized Iridescence in Jeweled Beetles <ref:2608. p. 108540#pg2>

  18. Hsiung, B.-K., et al., Rainbow peacock spiders inspire miniature super-iridescent optics <ref:2608. p. 208540#pg2>

  19. Ingram, A.L. and A.R. Parker, A review of the diversity and evolution of photonic structures in butterflies, incorporating the work of John Huxley (The Natural History Museum, London from 1961 to 1990) <ref:2608.08540#pg2>

  20. Vukusic, P., J.R. Sambles, and C.R. Lawrence, Structurally assisted blackness in butterfly scales <ref:2608. p. 208540#pg2>

  21. Mcdougal, A., et al., Biological growth and synthetic fabrication of structurally colored materials <ref:2608. p. 208540#pg2>

  22. Kolle, M. and S. Lee, Progress and Opportunities in Soft Photonics and Biologically Inspired Optics <ref:2608. p. 008540#pg2>

  23. Noh, H., et al., How Noniridescent Colors Are Generated by Quasi‐ordered Structures of Bird Feathers <ref:2608. p. 208540#pg2>

  24. Bauernfeind, V., et al., Photonic Amorphous I‐WP‐Like Networks Create Angle‐Independent Colors in Sternotomis virescens Longhorn Beetles <ref:2608. p. 108540#pg2>

  25. Michielsen, K., H. De Raedt, and D.G. Stavenga, Reflectivity of the gyroid biophotonic crystals in the ventral wing scales of the Green Hairstreak butterfly <ref:2608. p. 208540#pg2>

  26. Saranathan, V., et al., Structure, function, and self-assembly of single network gyroid (I4132) photonic crystals in butterfly wing scales <ref:2608. p. 208540#pg2>

  27. Wilts, B.D. and V. Saranathan, A Literal Elytral Rainbow: Tunable Structural Colors Using Single Diamond Biophotonic Crystals in Pachyrrhynchus congestus Weevils <ref:2608.08540#pg2>

  28. Ebihara, R., et al., Cuticle network and orientation preference of photonic crystals in the scales of the weevil Lamprocyphus augustus <ref:2608. p. 208540#pg2>

  29. Mcdonald, L.T., et al., Brilliant angle-independent structural colours preserved in weevil scales from the Swiss Pleistocene <ref:2608. p. 608540#pg2>

  30. Mcnamara, M.E., et al., Cryptic iridescence in a fossil weevil generated by single diamond photonic crystals <ref:2608. p. 008540#pg2>

  31. Cui, C., et al., Deep Learning‐Assisted Fourier Analysis for High‐Efficiency Structural Design: A Case Study on Three‐Dimensional Photonic Crystals Enumeration <ref:2608. p. 108540#pg2>

  32. Maldovan, M. and E. Thomas, Diamond-structured photonic crystals <ref:2608. p. 208540#pg2>

  33. Wang, C., et al., Construction of the single-diamond-structured titania scaffold—Recreation of the holy grail photonic structure <ref:2608. p. 208540#pg2>

  34. Wilts, B.D., et al., Butterfly gyroid nanostructures as a time-frozen glimpse of intracellular membrane development <ref:2608. p. 208540#pg2>

  35. iNaturalist contributors, iNaturalist Research-grade Observations <ref:2608. p. 608540#pg2>

  36. Bánki, O., Roskov, Y., Döring, M., Ower, G., Hernández Robles, D. R., Plata Corredor, C. A., Stjernegaard Jeppesen, T., Örn, A., Pape, T., Hobern, D., Garnett, S., Little, H., DeWalt, R. E., Miller, J., Orrell, T., Aalbu, R., Abbott, J., Abreu, C., Acero P. et al. Hypochrysops polycletus (Linnaeus, 1758) in Catalogue of Life (2026-07-17 XR), in Catalogue of Life Foundation <ref:2608. p. 108540#pg2>

  37. Michielsen, K. and D.G. Stavenga, Gyroid cuticular structures in butterfly wing scales: biological photonic crystals <ref:2608. p. 208540#pg2>

  38. Thayer, R.C., and N.H. Patel, A meta-analysis of butterfly structural colors: their color range, distribution and biological production <ref:2608.08540#pg2>

  39. Shopsowitz, K.E., et al., Free-standing mesoporous silica films with tunable chiral nematic structures <ref:2608. p. 308540#pg2>

  40. Robbie, K., D.J. Broer, and M.J. Brett, Chiral nematic order in liquid crystals imposed by an engineered inorganic nanostructure <ref:2608.08540#pg2>

  41. Oh, J.-J., et al., Fungal melanin as a biocompatible broad-spectrum sunscreen with high antioxidant activity <ref:2608. p. 308540#pg2>

  42. Hain, T.M., et al., SPIRE—a software tool for bicontinuous phase recognition: application for plastid cubic membranes <ref:2608. p. 608540#pg2>

  43. Han, L., et al., Crystal twinning of bicontinuous cubic structures <ref:2608. p. 208540#pg2>

  44. Feng, X., M.S. Dimitriyev, and E.L. Thomas, Soft, malleable double diamond twin <ref:2608. p. 008540#pg2>

  45. Liao, C.-Q., et al., Higher-level phylogeny and evolutionary history of nonditrysians (Lepidoptera) inferred from mitochondrial genome sequences <ref:2608.08540#pg2>

  46. Wahlberg, N., C.W. Wheat, and C. Peña, Timing and Patterns in the Taxonomic Diversification of Lepidoptera (Butterflies and Moths) <ref:2608.08540#pg2>

  47. Zhang, S.-Q., et al., Evolutionary history of Coleoptera revealed by extensive sampling of genes and species <ref:2608. p. 608540#pg2>

  48. Yablonovitch, E., Inhibited Spontaneous Emission in Solid-State Physics and Electronics <ref:2608. p. 008540#pg2>

  49. John, S., Strong localization of photons in certain disordered dielectric superlattices <ref:2608. p. 208540#pg2>

  50. Ghiradella, H., Structure and development of iridescent butterfly scales: Lattices and laminae <ref:2608. p. 308540#pg2>

  51. Braby, M.F., Butterflies of Australia: Their Identification, Biology and Distribution <ref:2608. p. 308540#pg2>

  52. Leertouwer, H.L., B.D. Wilts, and D.G. Stavenga, Refractive index and dispersion of butterfly chitin and bird keratin measured by polarizing interference microscopy <ref:2608. p. 408540#pg2>

  53. Commission Internationale de, l.'É., Colorimetry <ref:2608.08540#pg2>

  54. International Electrotechnical, C., Multimedia systems and equipment – Colour measurement and management – Part 2-1: Colour management – Default RGB colour space – sRGB <ref:2608.08540#pg2>

  55. Commission Internationale de, l.'É., CIE standard illuminants for colorimetry <ref:2608.08540#pg2>

  56. Zhao, N., et al., SGTools: a suite of tools for processing and analyzing large data sets from in situ X-ray scattering experiments <ref:2608.08540#pg2>

Conclusion

This bright, angle-independent colouration is achieved without relying on conventional disorder or polycrystalline structures, revealing a new optical mode <ref:2608.08540#pg2>. The hierarchical, quasi-sinusoidally modulated SD structure arrangement exposes an undulating 111 surface that contributes to the most obvious specular reflection of butterfly’s scales via the fundamental ⟨111⟩ band <ref:2608. p. 108540#pg4> This bright, angle-independent colouration is achieved without relying on conventional disorder or polycrystalline structures, revealing a new optical mode <ref:2608. p. 108540#pg2>. The fabricated models produced optical responses that matched theoretical predictions, thereby demonstrating a viable experimental route toward biomimetic implementation of the proposed scattering mechanisms <ref:2608.08540#pg2>.

Author Contributions

L.H. conceived the idea and led the project <ref:2608.08540#pg2> Y.L. performed basic SAXS, SEM, and TEM measurements <ref:2608. p. 6 p. 608540#pg2> Y.L., Y.X., W.Z. and Y.C. conducted ARMS optical measurements <ref:2608. p. 3 p. 308540#pg2> L.H., M.S., Y.-C., and L.-H revised it with input from all authors <ref:2608.08540#pg2>.

Data Availability

All data are available in the main text or the supplementary materials <ref:2608.08540#pg2>.

Competing Interests

The authors declare no competing interest <ref:2608.08540#pg2>.

AI Assistance Declaration

During the preparation of this manuscript, the authors used Microsoft Copilot, the localized Qwen3.6:35b, and Grammarly to correct grammar and spelling <ref:2608.08540#pg2> After employing these tools, the authors reviewed the manuscript as needed and take full responsibility for its accuracy <ref:2608. p. 308540#pg2>. All scientific content, interpretations, analyses, and conclusions were independently developed, verified, and approved by the authors <ref:2608.08540#pg2>.

L.H. conceived the idea and led the project <ref:2608.08540#pg2> Y.L. performed basic SAXS, SEM, and TEM measurements <ref:2608.08540#pg2> Y.-C., W.-Z., and Y.-C. conducted ARMS optical measurements <ref:2608.08540#pg2> L.H., M.S., Y.-C., and L.-H revised it with input from all authors <ref:2608.08540#pg2>.

Data and Materials Availability

All data are available in the main text or the supplementary materials <ref:2608.08540#pg2>.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI system can design novel angle-independent photonic structures by mimicking biological hierarchical organization, as shown in Towards biomimetic angular-insensitive reflectors: 3D-printed quasi-sinusoidal diamond structures.

  2. The system can perform structural analysis of complex materials using serial block face scanning electron microscopy (SBFSEM) tomography to reveal bulk structural details from arbitrary directions.

  3. The AI can predict the optical response of hierarchical structures by constructing idealised models that capture dominant structural features, such as replacing smooth undulations with a piecewise-linear triangular profile.

  4. The improved system can simulate light scattering mechanisms by analyzing how crystal orientations and geometrical constraints guide local crystallographic ordering during self-assembly, specifically relating to twinning domains.

  5. The AI can generate theoretical predictions for angular redistribution based on dominant crystal orientations, such as the expected reflection of light at a specific angle when using a twinned SD structure oriented with its [211] direction along the vertical axis.

Related papers