Dynamics of fluid-fluid displacements in a model rough fracture beyond the quasistatic limit: A spectral approach

arXiv:2607.23759 · physics.flu-dyn · Submitted 2026-07-26 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "Dynamics of fluid-fluid displacements in a model rough fracture beyond the quasistatic limit".

Mira: Here's the gist of the paper. In fluid-fluid displacements in porous and fractured materials, viscous friction in microscale interfacial (Haines) jumps is intimately linked to macroscale energy dissipation and the associated pressure-saturation (retention) hysteresis <ref:2607.23759#pg2> The mode of control (flow rate vs.

Kai: pressure) and the driving rate can substantially affect hysteresis <ref:2607.23759#pg2> Despite the significance of hysteresis and dissipation in various technological and natural processes, a quantitative understanding of the link between the micro- and macro-scales, and of the impact of the inherent heterogeneity of porous media, remains elusive <ref:2607.23759#pg2>.

Mira: Model System Development An “imperfect” Hele-Shaw cell of variable aperture is a simple model system which allows to study all these in details <ref:2607.23759#pg2> The authors develop a spectral computational approach for interface evolution and energy dissipation and validate it via comparison to computational fluid dynamics simulations and experiments <ref:2607.23759#pg2>.

Kai: Computational efficiency is demonstrated by following interface evolution in a cell with a single “defect”, as well as with random roughness <ref:2607.23759#pg2> The approach provides a stepping stone towards upscaling of fluid-fluid flows in porous media <ref:2607.23759#pg2>.

Title and authors: Kai: Let's talk about who wrote this, Kai and Mira are leading the discussion here. The paper is "Dynamics of fluid-fluid displacements in a model rough fracture beyond the quasistatic limit: A spectral approach".

Mira: They are focusing on how fluid flow changes when you go past the slow, steady limit into faster movement regimes. It’s about those complex energy dissipation patterns in rough fractures that we can't easily track with current methods.

Lev: From an engineering standpoint, I wonder what kind of system they used to build this model. Is it something we can actually replicate with our current high-fidelity simulations?

Kai: The paper uses an "imperfect" Hele-Shaw cell of variable aperture as a simple model system to study all these effects in detail. They developed a spectral computational approach for tracking the interface evolution and energy dissipation.

Mira: That spectral approach is key here because it lets them validate their findings by comparing them to computational fluid dynamics simulations and also real experiments.

Lev: And what makes this specific method interesting for real hardware, I mean, the efficiency? Can it handle complex geometries without needing impossibly small time steps?

Kai: They show computational efficiency by following the interface evolution in a cell with just a single defect and also with random roughness. This approach is presented as a stepping stone toward upscaling fluid-fluid flows in porous media.

Mira: So, the core idea here is using this spectral method to get high accuracy without needing the brute force computation that CFD sometimes demands for these complex interfaces.

The paper's summary: Kai: So, what’s the main point of the paper? It tackles the problem of nonlocality, which is how much flow response depends on where you are in the system, and this was really out of reach for existing methods.

Mira: They use a spectral approach formulated based on hydrodynamic equations for bulk flow in that Hele-Shaw cell and kinematic and dynamic boundary conditions for the interface dynamics.

Lev: So, they track the dynamics of Fourier modes into which the interface shape is decomposed, which sounds like a powerful way to capture spatial information efficiently.

Kai: That’s right. The algorithm involves discretizing the solution in space and time, calculating Fourier components, advancing them using equations derived from equilibrium profiles, and then performing an inverse discrete Fourier transform to get the interface shape at all mesh points.

Mira: What’s really striking is their analysis of energy dissipation. They show theoretically that while viscous forces during those microscopic Haines jumps account for all the energy dissipated between consecutive metastable equilibria, viscosity itself doesn't change the total amount of dissipated energy, only how fast it relaxes.

Lev: That means if you drive it quasistatically—meaning at zero flow rate—the total dissipation amount doesn't depend on the actual fluid viscosity; it just equals the work of all forces other than viscous friction.

Kai: The derivation shows that for quasistatic pressure driving, energy dissipation is of viscous origin. This is a big piece of information about where that energy actually comes from in these systems.

The paper's improvements: Mira: Now let's talk about the improvements they suggest for this spectral approach itself. They use it to provide a quantitative tool to resolve fundamental questions, specifically about the individual contribution of viscous friction during continuous flow and of those Haines jumps.

Kai: That’s because this method gives us a way to look at the system that was previously elusive, especially regarding how the inherent heterogeneity of porous media impacts fluid flow.

Lev: I’m interested in how they handle scaling up. The paper suggests this approach opens up possibilities for upscaling flow behavior from the pore scale all the way to the meso scale, which is huge for modeling real geological systems or even complex materials.

Mira: They also show different temporal stages in system behavior when looking at both dissipation rate and interface evolution, identifying them as Stage I through Stage V. These stages show distinct power law and exponential decay behaviors for that dissipation rate.

Kai: And they pinpoint the sequence of these stages based on the defect size; for narrow defects, it’s I through III through IV through V. That gives us a specific fingerprint based on geometry.

Lev: So, if we're looking at real hardware, knowing those distinct power laws and cutoffs helps us set expectations for what kind of dynamics we might actually observe when we run the simulation or experiment.

Conclusion: Kai: So to wrap up this paper on "Dynamics of fluid-fluid displacements in a model rough fracture beyond the quasistatic limit: A spectral approach," they successfully tackle the nonlocality of the flow response to interface deformation, which was previously very hard.

Mira: This provides a quantitative tool for understanding fundamental questions, like what exactly is contributing to energy dissipation during continuous flow versus those intermittent Haines jumps.

Lev: The ability to handle large disordered systems opens up interesting possibilities for upscaling how fluid flows from the pore scale toward the meso scale, which is a major step forward for modeling complex materials.

Kai: We get a tool that gives us insights into both the viscous friction in continuous flow and those jumps, depending on how you drive the system.

Mira: It’s a quantitative method that lets us see different temporal stages in the system behavior through power laws and exponential decays, which depend on things like capillary length or defect width.

Lev: And for real hardware, knowing these dissipation rates are universal in certain stages and only vary with the defect size in stage V gives us concrete rules to follow when we design our error correction or simulation parameters.

Kai: We've seen how the spectral approach matches CFD predictions for both interface evolution and dissipation rate at a small fraction of computational resources.

Mira: It’s a method that allows us to predict interface shapes by solving closed-form expressions for Fourier modes, bypassing the need for extremely small integration time steps required by traditional numerical methods like CFD.

Lev: That efficiency gain is what makes this approach viable for running on more realistic hardware when we move toward large systems.

Kai: So the "Dynamics of fluid-fluid displacements in a model rough fracture beyond the quasistatic limit: A spectral approach" gives us a quantitative way to understand how energy is dissipated and how that dissipation scales with system size and driving rate.

Mykyta V. Chubynsky, Jordi Ort´ın, Marco Dentz, Ran Holtzman

Institute of Environmental Assessment and Water Research (IDAEA), Spanish National Research Council (CSIC) · Departament de Física de la Materia Condensada, Universitat de Barcelona · University of Barcelona Institute of Complex Systems (UBICS)

physics.flu-dyn

Submitted: 2026-07-26

Updated: 2026-11-07

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 83/100

The gist: In fluid-fluid displacements in porous and fractured materials, viscous friction in microscale interfacial (Haines) jumps is intimately linked to macroscale energy dissipation and the associated…

Key concepts

Imperfect Hele-Shaw cell
This is a simple model system used to study fluid flow where the gap between two plates is not perfectly uniform. It allows researchers to investigate how flow and interface movement occur in systems that are more realistic than ideal models, such as those found in porous media.
Spectral Approach
This method uses Fourier expansion to decompose the complex shape of the fluid interface into a set of simpler mathematical components (Fourier modes). By tracking how these modes evolve over time using derived equations, it achieves high accuracy and computational speed by avoiding fine spatial and temporal discretization required by traditional methods.
Haines Jumps
These are sudden, discontinuous jumps in the fluid interface shape that occur during fluid displacement. The paper analyzes the viscous friction associated with these jumps to link microscale interfacial events to macroscale energy dissipation and pressure hysteresis.

Terminology

Summary

In fluid-fluid displacements in porous and fractured materials, viscous friction in microscale interfacial (Haines) jumps is intimately linked to macroscale energy dissipation and the associated pressure-saturation (retention) hysteresis <ref:2607. p. 0

Where the paper says it

holtzman@csic. es (Received xx; revised xx; accepted xx) In fluid-fluid displacements in porous and fractured materials, viscous friction in microscale interfacial (Haines) jumps is intimately linked to macroscale energy dissipation and the associated pressure-saturation (retention) hysteresis.

23759#pg2> The mode of control (flow rate vs. p. 0
Where the paper says it

es (Received xx; revised xx; accepted xx) In fluid-fluid displacements in porous and fractured materials, viscous friction in microscale interfacial (Haines) jumps is intimately linked to macroscale energy dissipation and the associated pressure-saturation (retention) hysteresis. The mode of control (flow rate vs.

pressure) and the driving rate can substantially affect hysteresis <ref:2607. p. 0
Where the paper says it

The mode of control (flow rate vs. pressure) and the driving rate (from quasistatic to finite) can substantially affect hysteresis.

23759#pg2> Despite the significance of hysteresis and dissipation in various technological and natural processes, a quantitative understanding of the link between the micro- and macro-scales, and of the impact of the inherent heterogeneity of porous media, remains elusive <ref:2607. p. 0
Where the paper says it

pressure) and the driving rate (from quasistatic to finite) can substantially affect hysteresis. Despite the significance of hysteresis and dissipation in various technological and natural processes, a quantitative understanding of the link between the micro- and macro-scales, and of the impact of the inherent heterogeneity of porous media, remains elusive.

23759#pg2>.

Model System Development

An “imperfect” Hele-Shaw cell of variable aperture is a simple model system which allows to study all these in details <ref:2607.23759#pg2> The authors develop a spectral computational approach for interface evolution and energy dissipation and validate it via comparison to computational fluid dynamics simulations and experiments <ref:2607. p. 0

Where the paper says it

However, simulating fluid-fluid interface evolution in heterogeneous media, even in such a simple system, is computationally prohibitive, as multiple length and time scales need to be resolved simultaneously. We develop here a spectral computational approach for interface evolution and energy dissipation and validate it via comparison to computational fluid dynamics simulations and experiments.

23759#pg2>. Computational efficiency is demonstrated by following interface evolution in a cell with a single “defect”, as well as with random roughness <ref:2607. p. 0
Where the paper says it

We develop here a spectral computational approach for interface evolution and energy dissipation and validate it via comparison to computational fluid dynamics simulations and experiments. Computational efficiency is demonstrated by following interface evolution in a cell with a single “defect”, as well as with random roughness; in both, disparate length scales lead to nontrivial dynamics over many orders of magnitude in time.

23759#pg2> The approach provides a stepping stone towards upscaling of fluid-fluid flows in porous media <ref:2607. p. 0
Where the paper says it

We also show theoreticallythat while viscous forces during Haines jumps fully account for the energy dissipated between consecutive metastable equilibria, viscosity does not change the total dissipated amount, merely the relaxation time. Our approach provides a stepping stone towards upscaling of fluid-fluid flows in porous media.

23759#pg2>.

Energy Dissipation Analysis

The authors show theoretically that while viscous forces during Haines jumps fully account for the energy dissipated between consecutive metastable equilibria, viscosity does not change the total dissipated amount, merely the relaxation time <ref:2607.23759#pg2> The total dissipation in a Haines jump under quasistatic driving does not depend on the liquid viscosity <ref:2607. p. 6

Where the paper says it

Thus, in this limit one only needs to consider dissipation during Haines jumps. Notably, even though energy dissipation in the system we consider is viscous in nature, the total amount of dissipation in a Haines jump under quasistatic driving does not depend on the liquid viscosity .

23759#pg2>. This is demonstrated by showing that the total dissipation amount is viscosity-independent, as it equals the work of all forces other than viscous friction <ref:2607. p. 7
Where the paper says it

The viscosity independence of the total dissipation is natural, because in the Stokes limit where Eq. 1) was derived the contribution of the kinetic energy to the energy balance is negligible, and the total dissipation simply equals the work of all forces other than viscous friction.

23759#pg2> The derivation shows that energy dissipation in a Haines jump for quasistatic pressure driving is of viscous origin <ref:2607. p. 2
Where the paper says it

2, we derive the fundamental equations for the IHSC, and use the Hele-Shaw formulation to explicitly show that viscous (frictional) forces during Haines jumps fully account for the energy dissipated between consecutive metastable equilibria in quasistatic displacements. Our analysis also provides a nonintuitive result: while the energy dissipation is viscous in origin, the total dissipation in a Haines jump is viscosity-independent.

23759#pg2>.

Spectral Approach Methodology

The spectral approach is formulated based on the hydrodynamic equations for the bulk flow in the IHSC and kinematic and dynamic boundary conditions for the interface dynamics <ref:2607.23759#pg2> The approach tracks the dynamics of the Fourier modes into which the interface shape is decomposed, providing both high accuracy and high computational efficiency <ref:2607. p. 2

Where the paper says it

3 presents a novel spectral approach, formulated based on the hydrodynamic equations for the bulk flow in the IHSC and kinematic and dynamic boundary conditions for the interface dynamics. The approach tracks the dynamics of the Fourier modes into which the interface shape is decomposed, providing both high accuracy and high computational efficiency.

23759#pg2>. The algorithm involves discretizing the solution in space and time, calculating Fourier components, advancing them using equations derived from equilibrium profiles, and then performing an inverse discrete Fourier transform to obtain the interface shape at all mesh points <ref:2607. p. 2
Where the paper says it

3 presents a novel spectral approach, formulated based on the hydrodynamic equations for the bulk flow in the IHSC and kinematic and dynamic boundary conditions for the interface dynamics. The approach tracks the dynamics of the Fourier modes into which the interface shape is decomposed, providing both high accuracy and high computational efficiency.

p. 2
Where the paper says it

3 presents a novel spectral approach, formulated based on the hydrodynamic equations for the bulk flow in the IHSC and kinematic and dynamic boundary conditions for the interface dynamics. The approach tracks the dynamics of the Fourier modes into which the interface shape is decomposed, providing both high accuracy and high computational efficiency.

23759#pg2>.

Validation and Findings

The spectral approach predictions closely match those of the CFD in terms of both the interface evolution (Fig. 3) and the dissipation rate (Fig. p. 3

Where the paper says it

Flow and energy dissipation in an imperfect Hele-Shaw cell We consider an IHSC in which one inner surface is flat, and the other is rough such that the aperture (inter-surface distance) (, ) varies in space. Here is horizontal and is directed along the surface upwards (Fig.

4), at a small fraction of the computational resources <ref:2607. p. 2
Where the paper says it

The computational cost of CFD remains prohibitive even when considering 2D systems, or averaging over the third dimension (Krishna et al. Pore network models require much less computational resources, but they use a simplified pore geometry that cannot resolve the actual interface configuration (Hughes & Blunt 2001; Ferer et al.

23759#pg2> The analysis reveals different temporal stages in the system behaviour, in terms of both the dissipation rate and the interface evolution <ref:2607. p. 2
Where the paper says it

Furthermore, finite-rate displacements go through different paths (in terms of interfacial configurations) than quasistatic displacements, as the system progressively departs from mechanical equilibrium as rates increase. At finite driving rates, viscous dissipation occurs both in the intermittent jumps triggered by the medium heterogeneities and in the continuous displacements of the fluid phases (Moebius & Or 2012; Berg et al.

23759#pg2>. These stages are identified as Stage I through Stage V, showing distinct power law and exponential decay behaviors for the dissipation rate <ref:2607.23759#pg2> The results show that for narrow defects, the sequence of stages is I → III → IV → V <ref:2607.23759#pg2>.

Conclusion

The approach tackles successfully a highly challenging problem—the nonlocality of the response of the flow to interface deformation, which was out of reach of existing methods <ref:2607.23759#pg2> This provides a quantitative tool to resolve fundamental questions such as the individual contribution of viscous friction during continuous flow and of Haines jumps <ref:2607. p. 2

Where the paper says it

2, we derive the fundamental equations for the IHSC, and use the Hele-Shaw formulation to explicitly show that viscous (frictional) forces during Haines jumps fully account for the energy dissipated between consecutive metastable equilibria in quasistatic displacements. Our analysis also provides a nonintuitive result: while the energy dissipation is viscous in origin, the total dissipation in a Haines jump is viscosity-independent.

23759#pg2>. The ability to handle large disordered systems opens up interesting possibilities for upscaling the flow behaviour from the pore- to the meso-scale <ref:2607. p. 2
Where the paper says it

Simulating the dynamics of the displacements at finite rates in large disordered media is computationally prohibitive. Computational fluid dynamics models (CFD; also called “direct methods”) discretising the Navier-Stokes equations are capable of resolving twophase flows at finite rates in complex pore geometries, however, at a computational cost that limits simulations to very small domains, insufficient to describe complex heterogeneous pore geometry or generate the large number of realizations required for upscaling (Ramstad et al.

23759#pg2>.

Pruning redundant reasoning tokens

The authors demonstrate that in quasistatically-driven displacements, the energy dissipated (in Haines jumps) is of viscous origin <ref:2607.23759#pg2> They prove that the total amount of energy dissipated in a Haines jump is independent of the actual fluid viscosity <ref:2607. p. 2

Where the paper says it

2, we derive the fundamental equations for the IHSC, and use the Hele-Shaw formulation to explicitly show that viscous (frictional) forces during Haines jumps fully account for the energy dissipated between consecutive metastable equilibria in quasistatic displacements. Our analysis also provides a nonintuitive result: while the energy dissipation is viscous in origin, the total dissipation in a Haines jump is viscosity-independent.

23759#pg2> The authors show that the interface evolution exhibits different temporal stages as identified for the dissipation rate <ref:2607. p. 3
Where the paper says it

As considered previously, when the controlling inlet pressure is constant or the flow rate is zero, it is possible to write down an equation for the shape of the interface in equilibrium; in the quasistatic limit, the interface may follow the equilibrium shape that now changes slowly, except during Haines jumps (Sec. Starting from an equation for the energy dissipation rate, we then show that the total viscous dissipation amount during a Haines jump in the quasistatic limit is viscosity-independent (Sec.

23759#pg2>.

How the training signal is built

The spectral approach is formulated based on a Fourier expansion (using Fast Fourier Transform) of the interfacial configurations <ref:2607.23759#pg2> The evolution of the interface shape is tracked by advancing its Fourier modes in time according to equations derived from equilibrium profiles <ref:2607. p. 2

Where the paper says it

3 presents a novel spectral approach, formulated based on the hydrodynamic equations for the bulk flow in the IHSC and kinematic and dynamic boundary conditions for the interface dynamics. The approach tracks the dynamics of the Fourier modes into which the interface shape is decomposed, providing both high accuracy and high computational efficiency.

23759#pg2>. The algorithm involves discretizing the solution in space and time, calculating Fourier components, advancing them using equations derived from equilibrium profiles, and then performing an inverse discrete Fourier transform to obtain the interface shape at all mesh points <ref:2607.23759#pg2>.

Where the gains come from

The high efficiency of our approach is gained by making simplifying assumptions which can be divided into two categories: (a) general, which are inherent in the basic 2D HeleShaw equations <ref:2607.23759#pg2>; and (b) specific to the spectral approach <ref:2607. p. 0

Where the paper says it

One inherent intriguing aspect is its history-dependent Abstract must not spill onto p. 2 0 X0-1 arXiv:2607.

23759#pg2>. The first includes simplified representation of the interface curvature, boundary conditions (slip and contact angle with side and top walls), exclusion of inertial effects as well as interface disconnections and fluid trapping <ref:2607. p. 5
Where the paper says it

r Finally, we do not account for 3D wetting effects, includingthin residual coating layers of the wetting liquid along the solid walls left in the drained region during imbibition, which modify the kinematic and dynamic boundary conditions to account for volume conservation and enhanced curvature and viscous stresses at the interface (Park & Homsy 1984; Reinelt & Saffman 1985; Morrow et al. 2023), as well as instabilities caused by entrainment of the less-wetting fluid (Levache & Bartolo 2014; Odier ´ et al.

23759#pg2>; the second category includes small deformation (linear approximation) and consideration of the effect of the gap variations only in the capillary pressure <ref:2607. p. 7
Where the paper says it

17) We stress that the effect of the non-uniformity of (, ) on capillary pressure is explicitly included. This may appear inconsistent, since all three contributions due to variations of are of the same order (linear) in = − 0 in the equations they enter.

23759#pg2>. The good agreement with experiments using mesa defects indicates that the impact of at least some of these is small <ref:2607. p. 5
Where the paper says it

2009) which may appear along mesa defects and possibly other locations where there are abrupt changes of aperture. Despite these assumptions, the approach applies to a wide range of conditions of interest, confirmed, for example, by the good agreement with experiments discussed in Sec.

23759#pg2>.

The authors show that in stages I and III, the time dependence of the dissipation rate exhibits several distinct stages <ref:2607.23759#pg2> The results show that for narrow defects, the sequence of stages is I → III → IV → V <ref:2607.23759#pg2>. The spectral approach provides a much higher computational efficiency compared to CFD methods <ref:2607. p. 2

Where the paper says it

Simulating the dynamics of the displacements at finite rates in large disordered media is computationally prohibitive. Computational fluid dynamics models (CFD; also called “direct methods”) discretising the Navier-Stokes equations are capable of resolving twophase flows at finite rates in complex pore geometries, however, at a computational cost that limits simulations to very small domains, insufficient to describe complex heterogeneous pore geometry or generate the large number of realizations required for upscaling (Ramstad et al.

p. 2
Where the paper says it

Simulating the dynamics of the displacements at finite rates in large disordered media is computationally prohibitive. Computational fluid dynamics models (CFD; also called “direct methods”) discretising the Navier-Stokes equations are capable of resolving twophase flows at finite rates in complex pore geometries, however, at a computational cost that limits simulations to very small domains, insufficient to describe complex heterogeneous pore geometry or generate the large number of realizations required for upscaling (Ramstad et al.

p. 2
Where the paper says it

Simulating the dynamics of the displacements at finite rates in large disordered media is computationally prohibitive. Computational fluid dynamics models (CFD; also called “direct methods”) discretising the Navier-Stokes equations are capable of resolving twophase flows at finite rates in complex pore geometries, however, at a computational cost that limits simulations to very small domains, insufficient to describe complex heterogeneous pore geometry or generate the large number of realizations required for upscaling (Ramstad et al.

p. 2
Where the paper says it

Simulating the dynamics of the displacements at finite rates in large disordered media is computationally prohibitive. Computational fluid dynamics models (CFD; also called “direct methods”) discretising the Navier-Stokes equations are capable of resolving twophase flows at finite rates in complex pore geometries, however, at a computational cost that limits simulations to very small domains, insufficient to describe complex heterogeneous pore geometry or generate the large number of realizations required for upscaling (Ramstad et al.

23759#pg2>.

The authors show that in stages I and III, the dissipation rate is proportional to the infinite sum of all the prefactors <ref:2607.23759#pg2> The results show that for narrow defects, stage I terminates at l cubed, at which point the maximum reaches the centre of the defect <ref:2607. p. 0

Where the paper says it

Computational efficiency is demonstrated by following interface evolution in a cell with a single “defect”, as well as with random roughness; in both, disparate length scales lead to nontrivial dynamics over many orders of magnitude in time. We also show theoreticallythat while viscous forces during Haines jumps fully account for the energy dissipated between consecutive metastable equilibria, viscosity does not change the total dissipated amount, merely the relaxation time.

23759#pg2>. The spectral approach provides a much higher computational efficiency compared to CFD methods <ref:2607.23759#pg2>.

The authors show that for wide defects, the sequence is I → II → IV → V <ref:2607.23759#pg2> The results show that for wide defects, stage I terminates at l squared, at which point the perturbation amplitude hmax − hmin is already on the order of H <ref:2607.23759#pg2>. The spectral approach provides a much higher computational efficiency compared to CFD methods <ref:2607.23759#pg2>.

The authors show that for wide defects, stage I terminates at l squared, at which point the perturbation amplitude hmax − hmin is already on the order of H <ref:2607.23759#pg2>. The spectral approach provides a much higher computational efficiency compared to CFD methods <ref:2607.23759#pg2>.

The authors show that in stage I and III, the rescaled height h˜ = l squared / h H squared = h˜(,˜ ˜), where is given by Eqs. (5.20) and (5.21) <ref:2607. p. 0

Where the paper says it

One inherent intriguing aspect is its history-dependent Abstract must not spill onto p. 2 0 X0-1 arXiv:2607.

23759#pg2> The spectral approach provides a much higher computational efficiency compared to CFD methods <ref:2607. p. 2
Where the paper says it

Simulating the dynamics of the displacements at finite rates in large disordered media is computationally prohibitive. Computational fluid dynamics models (CFD; also called “direct methods”) discretising the Navier-Stokes equations are capable of resolving twophase flows at finite rates in complex pore geometries, however, at a computational cost that limits simulations to very small domains, insufficient to describe complex heterogeneous pore geometry or generate the large number of realizations required for upscaling (Ramstad et al.

p. 2
Where the paper says it

Simulating the dynamics of the displacements at finite rates in large disordered media is computationally prohibitive. Computational fluid dynamics models (CFD; also called “direct methods”) discretising the Navier-Stokes equations are capable of resolving twophase flows at finite rates in complex pore geometries, however, at a computational cost that limits simulations to very small domains, insufficient to describe complex heterogeneous pore geometry or generate the large number of realizations required for upscaling (Ramstad et al.

p. 2
Where the paper says it

Simulating the dynamics of the displacements at finite rates in large disordered media is computationally prohibitive. Computational fluid dynamics models (CFD; also called “direct methods”) discretising the Navier-Stokes equations are capable of resolving twophase flows at finite rates in complex pore geometries, however, at a computational cost that limits simulations to very small domains, insufficient to describe complex heterogeneous pore geometry or generate the large number of realizations required for upscaling (Ramstad et al.

p. 2
Where the paper says it

Simulating the dynamics of the displacements at finite rates in large disordered media is computationally prohibitive. Computational fluid dynamics models (CFD; also called “direct methods”) discretising the Navier-Stokes equations are capable of resolving twophase flows at finite rates in complex pore geometries, however, at a computational cost that limits simulations to very small domains, insufficient to describe complex heterogeneous pore geometry or generate the large number of realizations required for upscaling (Ramstad et al.

p. 2
Where the paper says it

Simulating the dynamics of the displacements at finite rates in large disordered media is computationally prohibitive. Computational fluid dynamics models (CFD; also called “direct methods”) discretising the Navier-Stokes equations are capable of resolving twophase flows at finite rates in complex pore geometries, however, at a computational cost that limits simulations to very small domains, insufficient to describe complex heterogeneous pore geometry or generate the large number of realizations required for upscaling (Ramstad et al.

p. 2
Where the paper says it

Simulating the dynamics of the displacements at finite rates in large disordered media is computationally prohibitive. Computational fluid dynamics models (CFD; also called “direct methods”) discretising the Navier-Stokes equations are capable of resolving twophase flows at finite rates in complex pore geometries, however, at a computational cost that limits simulations to very small domains, insufficient to describe complex heterogeneous pore geometry or generate the large number of realizations required for upscaling (Ramstad et al.

p. 2
Where the paper says it

Simulating the dynamics of the displacements at finite rates in large disordered media is computationally prohibitive. Computational fluid dynamics models (CFD; also called “direct methods”) discretising the Navier-Stokes equations are capable of resolving twophase flows at finite rates in complex pore geometries, however, at a computational cost that limits simulations to very small domains, insufficient to describe complex heterogeneous pore geometry or generate the large number of realizations required for upscaling (Ramstad et al.

p. 2
Where the paper says it

Simulating the dynamics of the displacements at finite rates in large disordered media is computationally prohibitive. Computational fluid dynamics models (CFD; also called “direct methods”) discretising the Navier-Stokes equations are capable of resolving twophase flows at finite rates in complex pore geometries, however, at a computational cost that limits simulations to very small domains, insufficient to describe complex heterogeneous pore geometry or generate the large number of realizations required for upscaling (Ramstad et al.

p. 2
Where the paper says it

Simulating the dynamics of the displacements at finite rates in large disordered media is computationally prohibitive. Computational fluid dynamics models (CFD; also called “direct methods”) discretising the Navier-Stokes equations are capable of resolving twophase flows at finite rates in complex pore geometries, however, at a computational cost that limits simulations to very small domains, insufficient to describe complex heterogeneous pore geometry or generate the large number of realizations required for upscaling (Ramstad et al.

23759#pg2>.

The authors show that in stages II and IV, the closed-form expression is valid, which provides excellent fits in stages II and IV <ref:2607.23759#pg2> The spectral approach provides a much higher computational efficiency compared to CFD methods <ref:2607.23759#pg2>.

The authors show that for wide defects, the expression is also valid in stage I far enough from the defect edges and, in particular, h(= 0) = 2H arctan 2 <ref:2607.23759#pg2> The spectral approach provides a much higher computational efficiency compared to CFD methods <ref:2607.23759#pg2>.

The authors show that in stage I near the edge of the defect at −/2 = /2, h H 2/3 <ref:2607.23759#pg2> The spectral approach provides a much higher computational efficiency compared to CFD methods <ref:2607.23759#pg2>.

The authors show that the dissipation rate is universal in stages III and IV, and only varies with /l in stage V <ref:2607.23759#pg2> The spectral approach provides a much higher computational efficiency compared to CFD methods <ref:2607.23759#pg2>.

The authors show that the dissipation rate is universal in stages III and IV, and only varies with /l in stage V <ref:2607.23759#pg2> The spectral approach provides a much higher computational efficiency compared to CFD methods <ref:2607.23759#pg2>.

The authors show that the interface shape changes qualitatively between the different stages, as identified for the dissipation rate <ref:2607.23759#pg2> The spectral approach provides a much higher computational efficiency compared to CFD methods <ref:2607.23759#pg2>.

The authors show that the interface shape changes qualitatively between the different stages, as identified for the dissipation rate <ref:2607.23759#pg2> The spectral approach provides a much higher computational efficiency compared to CFD methods <ref:2607.23759#pg2>.

The authors show that in stage I and III all the data collapse onto master curves <ref:2607.23759#pg2> The spectral approach provides a much higher computational efficiency compared to CFD methods <ref:2607.23759#pg2>.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Spectral approach for interface dynamics can be used to predict two-phase displacements in imperfect Hele-Shaw cells at high accuracy and computational efficiency, following interface evolution over many orders of magnitude in time and space.

  2. The spectral approach can quantify energy dissipation by deriving analytical expressions for the dissipation rate based on the Fourier coefficients of the interface shape, showing that the total amount of dissipation in a Haines jump is viscosity-independent.

  3. The system can be analyzed to identify distinct temporal stages in interface evolution and dissipation rates, allowing researchers to characterize complex dynamics through universal power laws and exponential cutoffs dependent on length scales like capillary length and defect width.

  4. The approach allows for the prediction of interface shapes by solving closed-form expressions for Fourier modes, bypassing the need for extremely small integration timesteps required by traditional numerical methods like CFD.

Abstract

In fluid-fluid displacements in porous and fractured materials, viscous friction in microscale interfacial (Haines) jumps is intimately linked to macroscale energy dissipation and the associated pressure-saturation (retention) hysteresis. The mode of control (flow rate vs. pressure) and the driving rate (from quasistatic to finite) can substantially affect hysteresis. Despite the significance of hysteresis and dissipation in various technological and natural processes, a quantitative understanding of the link between the micro- and macro-scales, and of the impact of the inherent heterogeneity of porous media, remains elusive. An ``imperfect'' Hele-Shaw cell of variable aperture is a simple model system which allows to study all these in details. However, simulating fluid-fluid interface evolution in heterogeneous media, even in such a simple system, is computationally prohibitive, as multiple length and time scales need to be resolved simultaneously. We develop here a spectral computational approach for interface evolution and energy dissipation and validate it via comparison to computational fluid dynamics simulations and experiments. Computational efficiency is demonstrated by following interface evolution in a cell with a single ``defect'', as well as with random roughness; in both, disparate length scales lead to nontrivial dynamics over many orders of magnitude in time. We also show theoretically that, in the quasi-static limit, while viscous forces during Haines jumps fully account for the energy dissipated between consecutive metastable equilibria, viscosity does not change the total dissipated amount, merely the relaxation time. Our approach provides a stepping stone towards upscaling of fluid-fluid flows in porous media.

Related papers