Designing Strong and Broadband Nonreciprocal Thermal Radiation in Magnetic Topological Materials

arXiv:2606.14861 · cond-mat.mtrl-sci, cond-mat.mes-hall, physics.app-ph · Submitted 2026-06-12 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: We're looking at the paper: "Designing Strong and Broadband Nonreciprocal Thermal Radiation in Magnetic Topological Materials".

Mira: Here's the gist of the paper. Breaking reciprocity in thermal radiation opens opportunities for energy harvesting, sensing, and thermal management The authors predict a series of magnetic topological materials for magnetic-field-free nonreciprocal thermal radiation in the infrared regime by combining first-principles calculations with Maxwell electrodynamics They find strong and broadband nonreciprocity in magnetic Weyl semimetals like Co3Sn2S2, outperforming conventional semiconductors such as InAs The work establishes a predictive materials-discovery framework and quantitative design rules for next-generation magnet-free nonreciprocal thermal devices.

Kai: Pruning redundant reasoning tokens The ability to manipulate the absorption and emission of thermal radiation is central to energy harvesting, sensing, and thermal management Conventionally, Kirchhoff’s law enforces a strict equality between directional absorptivity (α) and emissivity (e), which constrains the efficiency of thermal photonic devices Violating this constraint requires breaking the Lorentz reciprocity through Hall-type optical response induced by either external magnetic field or intrinsic magnetization Breaking this constraint enables nonreciprocal thermal radiation, opening opportunities for energy harvesting at thermodynamic limits, infrared camouflage, and advanced heat flux control.

Mira: How the training signal is built The authors developed an integrated DFT–Kubo–Maxwell framework beyond approximations of effective medium or single-band models to quantitatively predict intrinsic nonreciprocal thermal radiation in real materials This framework involves performing density functional theory (DFT) calculations including spin-orbit coupling (SOC) and magnetic order to obtain the ground-state electronic structure.

Kai: They compute the full frequency-dependent conductivity tensor σij (ω) using the Kubo-Greenwood formula The dielectric tensor is then obtained as εij (ω) = ε∞δij + iσij (ω)/ε0ω, retaining all symmetry-allowed off-diagonal (Hall-type) components responsible for nonreciprocity.

Title and authors: Kai: So we're looking at this paper titled "Designing Strong and Broadband Nonreciprocal Thermal Radiation in Magnetic Topological Materials" and it seems they're talking about how to get nonreciprocal thermal radiation without needing an external magnetic field, which is pretty big because usually you need a magnetic field for that stuff <ref:2606.14861#pg1>

Mira: Yeah, the authors are focusing on predicting a series of specific magnetic topological materials for this effect in the infrared range by combining first-principles calculations with Maxwell electrodynamics <ref:2606.14861#pg1>

Lev: What do you mean by magnetic topological materials? Is this stuff already experimental, or are we talking purely theoretical predictions right now <ref:2606.14861#pg2>

Kai: It's about using the first-principles framework, like density functional theory including spin-orbit coupling and magnetic order, to get the ground state electronic structure and then compute the full frequency dependent conductivity tensor using the Kubo Greenwood formula <ref:2606.14861#pg2>

Mira: That framework lets them calculate that dielectric tensor, epsilon times omega equals epsilon zero plus i sigma times omega over epsilon zero omega, keeping all those off diagonal components responsible for nonreciprocity <ref:2606.14861#pg2>

Lev: So they are building a predictive tool to see how strong and broadband this nonreciprocity is in real materials, not just some effective medium approximations <ref:2606.14861#pg2>

Kai: Right, and the main result they show is that they find strong and broadband nonreciprocity in magnetic Weyl semimetals like Co3Sn2S2 which actually outperforms conventional semiconductors like InAs <ref:2606.14861#pg1>

Mira: They are showing a directional emissivity versus absorptivity contrast spectrum, delta omega theta equals e omega theta minus alpha omega theta, and for Co3Sn2S2, they find nonreciprocity that is not only stronger in magnitude but also substantially broader in bandwidth than InAs <ref:2606.14861#pg3>

Lev: That's interesting because conventional methods usually pick materials by chasing the anomalous Hall response and the epsilon near zero frequency divergence at the plasma frequency <ref:2606.14861#pg3>

Kai: But this paper suggests a predictive materials discovery framework and quantitative design rules for next generation magnet free nonreciprocal thermal devices <ref:2606.14861#pg2>

Mira: They propose two universal scaling laws, one for the strength law and one for the bandwidth law, which reveal how anomalous Hall response, optical loss, and dielectric dispersion govern this nonreciprocity <ref:2606.14861#pg2>

Title and authors: Lev: I'm curious about those rules—what are they telling us about tuning a material to get the best performance <ref:2606.14861#pg5>

Kai: The strength law is proportional to g over epsilon double d times p where x equals g over epsilon double d and p is between one and three half <ref:2606.14861#pg5>

Mira: And the bandwidth law is proportional to epsilon double d times beta where beta represents the linear frequency dependence of the diagonal dielectric tensor, which lets you tune how broadband the response is <ref:2606.14861#pg5>

Lev: So if I want a wider bandwidth, I should look at increasing that dielectric dispersion or optical loss term rather than just focusing on maximizing the anomalous Hall response <ref:2606.14861#pg5>

Kai: Exactly, and the bandwidth law combines two independent broadening mechanisms: a small dielectric dispersion beta keeps the material near the epsilon double x equals zero over a wider spectral window while larger optical loss broadens those resonance lineshape <ref:2606.14861#pg5>

Mira: And the ratio of epsilon double d over beta, which is exactly the plasma linewidth, determines that bandwidth of nonreciprocal radiation spectrum <ref:2606.14861#pg5>

Lev: So they're giving us a quantitative way to design these things instead of just guessing materials and hoping for the best <ref:2606.14861#pg5>

Kai: The total peak contrast scales as delta max proportional to g over epsilon double d times p where p is between one and three half, which is Eq. eight of the main text <ref:2606.14861#pg5>

Mira: Suppressing optical loss is essential for strong nonreciprocal emission because the exponent interpolates between the low loss semiconductor limit when p approaches one and the high loss metal limit when p approaches three half <ref:2606.14861#pg5>

Lev: That means if we want a very strong effect, we have to be careful about introducing too much optical loss in our design <ref:2606.14861#pg5>

Kai: They also talk about outliers of these universal scaling laws and how those four mechanisms map directly onto three model assumptions <ref:2606.14861#pg5>

Mira: Specifically, diagonal anisotropy and real dominated gyrotropy act on the strength panel, while multiple epsilon near zero crossings act on the bandwidth panel by broadening the response above that line <ref:2606.14861#pg5>

Title and authors: Lev: And they mentioned that if you don't have an epsilon near zero crossing, it removes the point from the collapse entirely, which is a key detail for where these rules apply <ref:2606.14861#pg5>

Kai: The paper establishes this predictive framework as a way to bridge the gap between toy models and realistic materials discovery <ref:2606.14861#pg3>

Mira: And they mentioned that at the device level, you can further amplify this intrinsic flat interface contrast using micro and nano patterned gratings or guided mode resonance surfaces <ref:2606.14861#pg5>

Lev: So, even if we design a material with good intrinsic properties, we still need to think about how the physical structure of the device itself can boost the signal <ref:2606.14861#pg5>

Kai: It sounds like this is really about creating a recipe for finding materials that work for magnetic field free nonreciprocal thermal devices <ref:2606.14861#pg1>

Mira: It's providing quantitative guidance, so instead of just searching through databases, you use these material figures of merit g over epsilon double d and epsilon double d over beta as pre screening filters <ref:2606.14861#pg5>

Lev: That seems useful for real hardware because it gives you a target to aim for when synthesizing new compounds <ref:2606.14861#pg5>

Kai: So, to wrap up on this paper titled "Designing Strong and Broadband Nonreciprocal Thermal Radiation in Magnetic Topological Materials", they provide a first-principles framework for nonreciprocal thermal radiation in magnetic topological materials <ref:2606.14861#pg3>

Mira: It bridges the gap between toy models and realistic materials discovery by developing a predictive tool for intrinsic nonreciprocal thermal radiation <ref:2606.14861#pg5>

Lev: For me, what this means is that we can use these design rules to guide synthesis, focusing on optimizing the material figure of merit g over epsilon double d and epsilon double d over beta <ref:2606.14861#pg5>

Kai: Yeah, and for the future work, they suggest that micro- and nanopatterned gratings can further amplify this intrinsic flat interface contrast at the device level <ref:2606.14861#pg5>

Mira: So overall, it's about creating a recipe for finding materials that exhibit strong and broadband nonreciprocal thermal radiation without an external magnetic field <ref:2606.14861#pg3>

Lev: That sounds like a solid path forward for designing next generation thermophotonic components <ref:2606.14861#pg5>

The paper's summary: Kai: So, to recap, this paper shows how you can use magnetic materials to get thermal radiation that doesn't depend on an external magnetic field, which is a big deal for things like energy harvesting or thermal sensing <ref:2606.14861#pg1>

Mira: Yeah, they're using these first-principles calculations, the density functional theory and the Kubo-Greenwood formula, to build a framework that predicts exactly how strong and how wide this nonreciprocity is in materials like Co3Sn2S2 <ref:2606.14861#pg2>

Lev: So they're not just guessing; they’re using a predictive tool to identify materials that naturally have the right properties for these devices <ref:2606.14861#pg5>

Kai: Right, and what I find really interesting is the specific scaling laws they derived for designing these things, like the strength law based on g over epsilon double d <ref:2606.14861#pg5>

Mira: The bandwidth law is also key, showing how you can tune the width of that nonreciprocal response by looking at epsilon double d over beta <ref:2606.14861#pg5>

Lev: It’s cool because it gives us concrete numbers to aim for when we're trying to synthesize new compounds and we know exactly what material figure of merit g over epsilon double d means in practice <ref:2606.14861#pg5>

Kai: And the way they map the different scaling laws onto those underlying assumptions—like diagonal anisotropy or multiple epsilon near zero crossings—is a really transparent way to understand where you can actually tune things <ref:2606.14861#pg5>

Mira: That means if you see a deviation from those rules, you know exactly which assumption is breaking, like if the real dominated gyrotropy is being underestimated by only looking at one axis <ref:2606.14861#pg5>

Lev: So for real hardware, it means we can use these rules as pre screening filters to narrow down a huge material space before we even start expensive synthesis runs <ref:2606.14861#pg5>

Kai: And they also mention that if you want to boost the contrast even more at the physical device level, you can use things like micro and nano patterned gratings or guided mode resonance surfaces <ref:2606.14861#pg5>

Mira: So it's not just about the material itself but how we structure it physically to get that flat interface contrast <ref:2606.14861#pg5>

Lev: It’s a nice piece of the puzzle because if we can figure out these intrinsic material properties and then apply smart geometry, we might actually be able to build some working devices on this concept <ref:2606.14861#pg5>

Kai: The big picture is that this gives us a quantitative blueprint for creating new types of thermal components that don't need bulky magnetic fields <ref:2606.14861#pg3>

Mira: It moves the whole field toward a more systematic approach to materials discovery by providing these explicit design rules <ref:2606.14861#pg5>

Lev: So, this paper sets up a clear path forward for anyone looking to design next-generation thermophotonic components without relying on magnetic fields <ref:2606.14861#pg3>

The paper's improvements: Kai: So, we're looking at how they suggest you can actually improve this prediction framework for designing these nonreciprocal materials <ref:2606.14861#pg5>

Mira: They suggest moving beyond just the basic scaling laws and using them to diagnose exactly which underlying assumptions are causing a deviation from the expected result <ref:2606.14861#pg5>

Lev: Which means you can identify if you're seeing a problem because of diagonal optical anisotropy or maybe multiple epsilon near zero crossings messing with the bandwidth calculation <ref:2606.14861#pg5>

Kai: Right, so instead of just saying "it doesn't work," the AI system can pinpoint the exact physical mechanism that's causing you to miss the optimal design point <ref:2606.14861#pg3>

Mira: It’s about giving you a diagnostic tool to understand where your material choice is falling short of the theoretical maximum contrast <ref:2606.14861#pg5>

Lev: If you can diagnose that, then the whole process becomes less about blind trial and error and more about targeted refinement of the material structure itself <ref:2606.14861#pg5>

Kai: And they also point out that for real applications, you can take these intrinsic flat interface contrasts and amplify them using physical structures like micro or nano patterned gratings <ref:2606.14861#pg5>

Mira: That suggests the material design rules are just the first step; you need to think about how to actually build a device that can harness this intrinsic nonreciprocity effectively <ref:2606.14861#pg5>

Lev: So it's not just about the material science anymore, it's about coupling those theoretical predictions with actual photonic engineering to get usable hardware <ref:2606.14861#pg5>

Kai: This shifts the focus from just finding a single perfect compound to creating a whole process for designing and building these thermal devices <ref:2606.14861#pg3>

Conclusion: Kai: So we've covered how this paper, "Designing Strong and Broadband Nonreciprocal Thermal Radiation in Magnetic Topological Materials," uses a predictive framework to find materials that can generate nonreciprocal thermal radiation without an external magnetic field <ref:2606.14861#pg3>

Mira: Exactly, they showed that by using first-principles calculations, you get these concrete design rules for strength and bandwidth based on things like the gyrotropy and the dielectric dispersion <ref:2606.14861#pg5>

Lev: From an engineering standpoint, this means we have a more defined set of material targets to aim for when we're synthesizing compounds because the scaling laws give us a specific mathematical roadmap <ref:2606.14861#pg5>

Kai: And they also showed how you can use that intrinsic nonreciprocity and then build physical structures like gratings to actually boost the signal for sensing or harvesting <ref:2606.14861#pg5>

Mira: It really moves things from just a theoretical possibility to a practical design challenge, giving researchers a quantitative way to filter materials <ref:2606.14861#pg5>

Lev: I think the diagnostic part, where the AI can tell you *why* a design is failing by pointing out which assumption broke—that's what makes this framework useful for running experiments <ref:2606.14861#pg5>

Kai: It’s about getting a handle on the complexity of these magnetic topological materials so we can build things that actually work at a measurable fidelity <ref:2606.14861#pg3>

Mira: So, it establishes a solid foundation for predicting how these specific magnetic Weyl semimetals will perform compared to conventional semiconductors like InAs <ref:2606.14861#pg1>

Lev: It’s a big step because it connects the first principles calculations directly to device-level requirements, which is where most of the overhead really lands <ref:2606.14861#pg5>

Kai: So for anyone interested in building next-generation thermal components, this paper provides a serious toolkit for material selection <ref:2606.14861#pg3>

Mira: It really sets the stage for us to think about how these intrinsic properties translate into real-world performance metrics <ref:2606.14861#pg5>

Lev: I think we need to look at how this framework handles the limitations, because it stops working once you move beyond those specific three model assumptions they used <ref:2606.14861#pg5>

Kai: Right, and that's what keeps us on our toes—the next step is figuring out if we can actually test these predictions on real samples with high enough fidelity to confirm the numbers <ref:2606.14861#pg3>

Mira: We’ll keep digging into these material databases and see how the predictive framework performs when applied to a wider range of compounds <ref:2606.14861#pg5>

Lev: Next week we'll be looking at how this concept meshes with error correction, so keep your eyes peeled for that deep dive <ref:2606.14861#pg3>

Department of Physics, The Pennsylvania State University · Department of Condensed Matter Physics, Weizmann Institute of Science · Department of Mechanical Engineering, The Pennsylvania State University

cond-mat.mtrl-sci, cond-mat.mes-hall, physics.app-ph

Submitted: 2026-06-12

Updated: 2026-11-10

Comments: Published in Nano Letters

Journal ref: Nano Lett. (2026)

DOI: 10.1021/acs.nanolett.6c02897

Project page: https://okongoyango.github.io/Nonreciprocal_Thermal_Material_Database

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 81/100

The gist: Breaking reciprocity in thermal radiation opens opportunities for energy harvesting, sensing, and thermal management The authors predict a series of magnetic topological materials for…

Key concepts

Nonreciprocity
This is the ability of a material to respond differently when light travels in opposite directions, such as the direction of heat flow. It arises from breaking the symmetry where absorption and emission are equal, allowing for directional control over thermal radiation.
DFT–Kubo–Maxwell Framework
This integrated computational approach uses Density Functional Theory (DFT) to find electronic structures and then the Kubo-Greenwood formula to calculate the frequency-dependent conductivity tensor. This allows researchers to predict intrinsic nonreciprocal thermal radiation directly from a material's fundamental atomic properties.
Scaling Laws
These are universal analytical rules derived from the physical mechanisms governing nonreciprocity. They use material parameters like gyrotropy (g/epsilon''d) and dielectric dispersion (epsilon''d/beta) to predict the maximum achievable contrast and the resulting bandwidth of nonreciprocal radiation.
Anomalous Hall Response
This is a specific electronic effect in magnetic materials where an external magnetic field induces a non-zero current response, even without an applied electric field. This topological property is identified as the primary driver for generating the necessary off-diagonal components for nonreciprocal thermal radiation.

Terminology

Summary

Breaking reciprocity in thermal radiation opens opportunities for energy harvesting, sensing, and thermal management The authors predict a series of magnetic topological materials for magnetic-field-free nonreciprocal thermal radiation in the infrared regime by combining first-principles calculations with Maxwell electrodynamics They find strong and broadband nonreciprocity in magnetic Weyl semimetals like Co3Sn2S2, outperforming conventional semiconductors such as InAs The work establishes a predictive materials-discovery framework and quantitative design rules for next-generation magnet-free nonreciprocal thermal devices. p. 0

Where the paper says it

In this work, we predict a series of magnetic topological materials for magnetic-field-free nonreciprocal thermal radiation in the infrared regime, by combining first-principles calculations with Maxwell electrodynamics. We find strong and broadband nonreciprocity in magnetic Weyl semimetals (e.

Pruning redundant reasoning tokens

The ability to manipulate the absorption and emission of thermal radiation is central to energy harvesting, sensing, and thermal management Conventionally, Kirchhoff’s law enforces a strict equality between directional absorptivity (α) and emissivity (e), which constrains the efficiency of thermal photonic devices Violating this constraint requires breaking the Lorentz reciprocity through Hall-type optical response induced by either external magnetic field or intrinsic magnetization Breaking this constraint enables nonreciprocal thermal radiation, opening opportunities for energy harvesting at thermodynamic limits, infrared camouflage, and advanced heat flux control.

How the training signal is built

The authors developed an integrated DFT–Kubo–Maxwell framework beyond approximations of effective medium or single-band models to quantitatively predict intrinsic nonreciprocal thermal radiation in real materials This framework involves performing density functional theory (DFT) calculations including spin-orbit coupling (SOC) and magnetic order to obtain the ground-state electronic structure. They compute the full frequency-dependent conductivity tensor σij (ω) using the Kubo-Greenwood formula The dielectric tensor is then obtained as εij (ω) = ε∞δij + iσij (ω)/ε0ω, retaining all symmetry-allowed off-diagonal (Hall-type) components responsible for nonreciprocity. p. 1

Where the paper says it

The dielectric tensor is then obtained as εij (ω) = ε∞δij + i σij (ω) ε0ω , (2) retaining all symmetry-allowed off-diagonal (Hall-type) components responsible for nonreciprocity. Finally, we compute the angle-resolved nonreciprocity on the material surface by solving the Maxwell’s equations.

Where the gains come from

The main figure of merit is the directional emissivity–absorptivity contrast spectrum ∆(ω, θ) = e(ω, θ) − α(ω, θ) The magnitude of ∆(ω) is between 0 and 1 because the emissivity e and absorptivity α are all between 0 and 1. For Co3Sn2S2, nonreciprocity is not only stronger in magnitude but also substantially broader in bandwidth than InAs The conventional recipe would select materials by maximizing the anomalous Hall response and chasing the εxz/Re εxx divergence at plasma frequency. p. 2

Where the paper says it

(4) The intuition is that the nonreciprocity is driven by the ratio of the asymmetric off-diagonal component (εxz) to the symmetric diagonal component, |εxz|/|Re εxx|, which diverges at Re εxx → 0 at the plasma frequency and hence predicts a strong enhancement there[6, 29, 37]. The conventional recipe would select materials by maximizing the anomalous Hall response and chasing the |εxz|/|Re εxx| divergence at plasma frequency.

Material Design Principles

The authors propose two universal scaling laws that are extremely useful for designing nonreciprocal thermophotonic materials These rules reveal how anomalous Hall response, optical loss, and dielectric dispersion govern the nonreciprocity. The strength law is ∆max ∝ g/(ε′′d)p, where x = g/ε′′d is the normalized gyrotropy The bandwidth law is ∆ω ∝ ε′′dβ, where β represents the linear frequency-dependence of the diagonal dielectric tensor. p. 2

Where the paper says it

Materials Design Principles – To extract the fundamental material parameters that determine the intrinsic nonreciprocity, we use a model to represent a generic gyrotropic dielectric tensor, ε(ω) =   εd(ω) 0 ig(ω) 0 εd(ω) 0 −ig(ω) 0 εd(ω)   (5) where the diagonal permittivity εd(ω) = ε ′ d (ω) + iε′′ d (ω) and off-diagonal component εxz(ω) = ig(ω), g(ω) stands for gyrotropy, equivalently the AHE response at optical frequency regime. At the plasma frequency (ω0) when ε ′ d (ω) crosses zero, we further simplify their frequency dependence as, ε ′ d (ω) = (ω − ω0)β, ε′′ d (ω) = ε ′′ d (ω0), g(ω) = g(ω0) (6) Here, β represents the linear frequency-dependence of the diagonal dielectric tensor, which we call dielectric dispersion at plasma frequency, since this quantity characterizes how fast the dielectric tensor changes, similar to optical dispersion that describes how refractive index change with respect to light frequency.

Derivation of the Bandwidth Scaling Law

The peak amplitude of the previous subsection fixes how strong the nonreciprocal response can be; the width of the same peak in frequency fixes how broadband it is The bandwidth law combines two independent broadening mechanisms: a small dielectric dispersion β keeps the material near Re εxx = 0 over a wider spectral window, while larger optical loss broadens the resonance lineshape The ratio ε′′d/β, which is exactly the plasma linewidth, determines the bandwidth of nonreciprocal radiation spectrum.

Geometric Extremization and Total Scaling

The total peak contrast is ∆max = 8 fmax(x, ε′′d) Gmax(κ), where Gmax(κ) is the closed-form geometric maximum The net peak contrast scales as ∆max ∝ g/(ε′′d)p, p ∈ [1, 3/2], which is Eq. (8) of the main text Suppressing optical loss is essential for strong nonreciprocal emission, the exponent interpolating between the low-loss semiconductor limit (p → 1) and the high-loss metal limit (p → 3/2). p. 3

Where the paper says it

Full database including dielectric spectra is available at Ref. at the plasma frequency Re εxx vanishes, so the only finite dielectric scale left for the off-diagonal anomalousHall response g to be measured against is the optical loss ε ′′ d , and the dimensionless ratio g/ε′′ d—through ∆max ∝ g/(ε ′′ d ) p—becomes the natural figure of merit for nonreciprocity strength; the exponent interpolates between the low-loss topological-semiconductor limit (p → 1, ε ′′ d ≪ 1) and the high-loss topological-metal limit (p → 3/2, ε ′′ d ≫ 1).

Outliers of the Universal Scaling Laws

The four mechanisms map directly onto the three model assumptions, and every deviation is traceable to a specific, identifiable breakdown of assumptions Diagonal anisotropy (a) and real-dominated gyrotropy (d) act on the strength panel Multiple ENZ crossings (b) act on the bandwidth panel, broadening the response above the line The absence of an ENZ (c) removes the point from the collapse entirely. p. 8

Where the paper says it

Two generic material inequalities hold for magnetic topological materials probed near the ENZ point: (A) |nv| 2 ≫ sin2 θ with nv ≡ p (ε 2 d − g 2)/εd, and (B) |nv| 2 ≫ |γ| 2 with γ ≡ ig/εd. Condition (A) allows us to replace B1 → nv, so that only A ∝ cos θ and B2 ∝ sin θ carry angular parity; condition (B) removes a subleading |γ| 2 sin2 θ term from Σ1.

Diagonal anisotropy and real-dominated gyrotropy signal that a single-axis figure of merit, evaluated at the wrong ENZ, underestimates the true nonreciprocal capacity of the material. p. 9
Where the paper says it

Anomalous Hall gyrotropy g: the off-diagonal term εxz = ig. Derivation of the Material Figure of Merit The nonreciprocal contrast factorizes as ∆ ≈ 8 f(ω) G(κ, θ) [Eq.

Discussion and Outlook

Our work establishes a quantitative, first-principles framework for nonreciprocal thermal radiation in magnetic topological materials The authors bridge the gap between toy models and realistic materials discovery by developing a predictive tool for intrinsic nonreciprocal thermal radiation At the device level, micro- and nanopatterned gratings or guided-mode resonance surfaces can further amplify the intrinsic flat-interface contrast The material figures of merit g/ε′′d and ε′′d/β derived here remain valid pre-screening filters regardless of the photonic geometry.

Acknowledgments

The authors thank helpful discussions with Chaoxing Liu, Kamal Das, Hengxin Tan, Pu Xiao, You-Chiuan Chen, Yiqi Zhao and Rui Jiang B.Y. acknowledges the financial support by the Penn State Materials Research Science and Engineering Center for Nanoscale Science (MRSEC) under National Science Foundation (NSF) award DMR2011839 and by the NSF DMREF Award 2522898 L. p. 4

Where the paper says it

ACKNOWLEDGMENTS We thank helpful discussions with Chaoxing Liu, Kamal Das, Hengxin Tan, Pu Xiao, You-Chiuan Chen, Yiqi Zhao and Rui Jiang. acknowledges the financial support by the Penn State Materials Research Science and Engineering Center for Nanoscale Science (MRSEC) under National Science Foundation (NSF) award DMR2011839 and by the NSF DMREF Award 2522898.

Z. acknowledges support from NSF award CBET-2238927. p. 4
Where the paper says it

acknowledges the financial support by the Penn State Materials Research Science and Engineering Center for Nanoscale Science (MRSEC) under National Science Foundation (NSF) award DMR2011839 and by the NSF DMREF Award 2522898. acknowledges support from NSF award CBET-2238927.

Appendix A

To compute the nonreciprocal thermal radiation properties—namely the angle-resolved and frequencydependent absorptivity α, emissivity e, reflectivity R, and transmissivity T—of a multilayered system, we employ a generalized 4×4 Berreman matrix formalism integrated with a Scattering Matrix (S-matrix) method The total field within the layer l is then expanded as a linear superposition of these eigenmodes.

Appendix B

All numerical values listed in the tables are rounded for clarity and uniform presentation The bandwidth ∆ω is the half-maximum support of ∆(ω, θmax) around ω0.

Appendix C

To provide a quantitative comparison with the conventional platform, we model the permittivity tensor of a heavily doped n-type InAs-based semiconductor slab placed in an external magnetic field B = 1 T The single-band non-parabolic effective mass model employed in Ref. [27] captures the dominant band-edge nonparabolicity through only the bandgap Eg and the band-edge mass mn of InAs The gyrotropic tensor takes the form ε(ω) = (εxx 0 εxz 0 εyy 0-ig 0 εd(ω) 0-ig 0 εd(ω)). p. 7

Where the paper says it

We therefore adopt the single-band non-parabolic effective-mass model employed in Ref. [27], which captures the dominant band-edge nonparabolicity through only the bandgap Eg and the band-edge mass mn of InAs.

Appendix D

The nonreciprocal directional contrast in p-polarized thermal emission is the absorptivity asymmetry under θ → −θ, ∆(ω, θ) = α(ω, −θ) − α(ω, θ) The exact parity identity ∆(ω, θ) = 4 (Σ2Π1 − Σ1Π2)/(Σ1 + Π1)2 - (Σ2 + Π2)2 The nonreciprocal contrast factorizes as ∆(ω, θ) ≈ 8 f(ω) G(κ, θ) The material dependence is carried entirely by f(ω) = −Re(n 2vγ∗)/nv4.

Appendix D 5

The total peak contrast is ∆max = 8 fmax(x, ε′′d) Gmax(κ), where Gmax(κ) is the closed-form geometric maximum The strength and bandwidth scaling laws are Eq. p. 3

Where the paper says it

Sweeping µ provides both experimental doping/gating advice and independent (g/ε′′ d , ∆max) and (ε ′′ d /β, ∆ω) data to examine our scaling laws. Figure 3 shows the outcome: on both the strength and bandwidth panels, most data points fall on the gray dashed slope-one reference line, confirming Eqs.

(8) and (9), which are the main results of our new material design principles. p. 2
Where the paper says it

By analyzing the ω and θ dependence and the maximum value of f(ω) and G(θ) (see Appendix D), we can obtain two universal scaling laws that are extremely useful for designing nonreciprocal thermophotonic materials: ∆max ∝ g (ε ′′ d ) p , (8) ∆ω ∝ ε ′′ d β . (9) Equations (8) and (9) are the main results of our new material design principles.

p. 2
Where the paper says it

By analyzing the ω and θ dependence and the maximum value of f(ω) and G(θ) (see Appendix D), we can obtain two universal scaling laws that are extremely useful for designing nonreciprocal thermophotonic materials: ∆max ∝ g (ε ′′ d ) p , (8) ∆ω ∝ ε ′′ d β . (9) Equations (8) and (9) are the main results of our new material design principles.

p. 2
Where the paper says it

By analyzing the ω and θ dependence and the maximum value of f(ω) and G(θ) (see Appendix D), we can obtain two universal scaling laws that are extremely useful for designing nonreciprocal thermophotonic materials: ∆max ∝ g (ε ′′ d ) p , (8) ∆ω ∝ ε ′′ d β . (9) Equations (8) and (9) are the main results of our new material design principles.

Appendix E

The four mechanisms map directly onto the three model assumptions, and every deviation is traceable to a specific, identifiable breakdown of assumptions Diagonal optical anisotropy (a) and real-dominated gyrotropy (d) act on the strength panel Multiple ENZ crossings (b) act on the bandwidth panel, broadening the response above the line. The absence of an ENZ (c) removes the point from the collapse entirely. Diagonal anisotropy and real-dominated gyrotropy act on the strength panel, while multiple ENZ crossings act on the bandwidth panel. p. 3

Where the paper says it

The external-field InAs point (B = 1 T) is included only as a conventional benchmark and follows the same universal trend. Three representative outliers, analyzed in Appendix E, are highlighted with red open symbols (and likewise in the p = 3/2 inset): a circle (⃝) for diagonal optical anisotropy [Eu3In2As4 (FMa)], a triangle (△) for multiple ENZ crossings [Eu3In2As4 (FMc)], and a star (✩) for a real-partdominated off-diagonal response [Co2MnAl].

The absence of an ENZ case (c) has no coordinate and is omitted from that figure. p. 5
Where the paper says it

no well-defined ω0—do not enter the nonreciprocalemission scaling analysis and are omitted from the tables (shown as “−”). For MnTe and InAs, whose ENZ response is confined to a restricted doping window, only the chemical potentials supporting a well-defined ω0 are tabulated [46].

Real-dominated gyrotropy measures only the imaginary part of a real-dominated off-diagonal response, and with high loss, ∆max is suppressed and the point falls below it. p. 3
Where the paper says it

(8) and (9) as material design rules. The fit is best for the InAs benchmark and Co3Sn2S2, whose off-diagonal response is dominated by its imaginary part (|Re εxz| ≪ |Im εxz|) and corresponds to the reduced model (Eq.

p. 3
Where the paper says it

(8) and (9) as material design rules. The fit is best for the InAs benchmark and Co3Sn2S2, whose off-diagonal response is dominated by its imaginary part (|Re εxz| ≪ |Im εxz|) and corresponds to the reduced model (Eq.

Appendix F

The full material-parameter and dielectric-tensor database underlying these tables is available as an interactive viewer at https://okongoyango.github.io/Nonreciprocal Thermal Material Database/ The paper is 2606. p. 0

Where the paper says it

Furthermore, we propose universal material design recipes: strong nonreciprocity requires a large anomalous Hall response relative to the optical loss, whereas the broadband response favors large optical loss and small dielectric dispersion. Our work establishes a predictive materials-discovery framework and quantitative design rules for next-generation magnet-free nonreciprocal thermal devices.

p. 0
Where the paper says it

Furthermore, we propose universal material design recipes: strong nonreciprocity requires a large anomalous Hall response relative to the optical loss, whereas the broadband response favors large optical loss and small dielectric dispersion. Our work establishes a predictive materials-discovery framework and quantitative design rules for next-generation magnet-free nonreciprocal thermal devices.

14861. EVERY sentence must end with a reference token

The generalized bianisotropic constitutive relations are D(ω, r) B(ω, r) = ε(ω) ξ(ω) ζ(ω) µ(ω), where ε, µ, ξ, and ζ are 3×3 tensors representing the permittivity, permeability, and magneto-electric coupling. For the magnetic topological materials studied here, the primary driver of nonreciprocal behavior is the anomalous Hall conductivity originating from the band topology The total field within the layer l is then expanded as a linear superposition of these eigenmodes. p. 5

Where the paper says it

6 where ε, µ, ξ, and ζ are 3×3 tensors representing the permittivity, permeability, and magneto-electric coupling. For the magnetic topological materials studied here, the primary driver of nonreciprocal behavior is the anomalous Hall conductivity originating from the band topology, which manifests as a non-Hermitian, fully populated permittivity tensor ε(ω), while µ = µ0I3×3 and ξ = ζ = 0.

The nonreciprocal contrast factorizes as ∆(ω, θ) ≈ 8 f(ω) G(κ, θ) The material dependence is carried entirely by f(ω) = −Re(n 2vγ∗)/nv4. The nonreciprocal contrast factorizes as ∆tan(ω, θ) = 8 f(ω) tan θ, f(ω) ≡ -Re(n 2vγ∗)/nv4 This compact form tracks the exact ∆ closely across θ ∈ [5◦, 85◦] — reproducing the two-peak structure, the peak positions, and the bandwidth — although the peak amplitude can differ by up to tens of percent. p. 8

Where the paper says it

Dropping (Σ2 + Π2) 2 from the denominator and Σ2Π1 from the numerator, ∆(ω, θ) ≈ − 4 Σ1 Π2 (Σ1 + Π1) 2 . (D5) This compact form tracks the exact ∆ closely across θ ∈ [5◦ , 85◦ ] — reproducing the two-peak structure, the peak positions, and the bandwidth — although the peak amplitude can differ by up to tens of percent (see Fig.

The stabilization parameter κ is a material scalar evaluated at ω0; its weak ω dependence is subleading at the scaling-analysis order of interest The total peak contrast is ∆max = 8 fmax(x, ε′′d) Gmax(κ), where Gmax(κ) is the closed-form geometric maximum. p. 9
Where the paper says it

The stabilization parameter κ is a material scalar evaluated at ω0; its weak ω dependence is subleading at the scaling-analysis order of interest. Equations (D6)–(D8) together establish that the nonreciprocal contrast ∆(ω, θ) cleanly separates into a material kernel f(ω) — developed in the 3-parameter ENZ model of the next subsection — and an angular shape function G(κ, θ) whose closed-form extremization is deferred to Appendix D 5.

The strength and bandwidth scaling laws are Eq. (8) and (9), which are the main results of our new material design principles. The bandwidth law is ∆ω = ε′′d W(x)β, which establishes Eq. p. 4
Where the paper says it

MnTe at high hole doping) have no plasma frequency and thus no reduced-model coordinate. Discussion and Outlook - Our work establishes a quantitative, first-principles framework for nonreciprocal thermal radiation in magnetic topological materials, built on two co-equal contributions: predictive DFT– Kubo–Maxwell calculations that identify Co3Sn2S2 and Eu3In2As4 as materials outperforming the InAs benchmark in the nonreciprocity strength, and closed-form analytical design rules that convert first-principles trends into material-selection criteria for both nonreciprocity strength and operational bandwidth.

p. 4
Where the paper says it

MnTe at high hole doping) have no plasma frequency and thus no reduced-model coordinate. Discussion and Outlook - Our work establishes a quantitative, first-principles framework for nonreciprocal thermal radiation in magnetic topological materials, built on two co-equal contributions: predictive DFT– Kubo–Maxwell calculations that identify Co3Sn2S2 and Eu3In2As4 as materials outperforming the InAs benchmark in the nonreciprocity strength, and closed-form analytical design rules that convert first-principles trends into material-selection criteria for both nonreciprocity strength and operational bandwidth.

p. 4
Where the paper says it

MnTe at high hole doping) have no plasma frequency and thus no reduced-model coordinate. Discussion and Outlook - Our work establishes a quantitative, first-principles framework for nonreciprocal thermal radiation in magnetic topological materials, built on two co-equal contributions: predictive DFT– Kubo–Maxwell calculations that identify Co3Sn2S2 and Eu3In2As4 as materials outperforming the InAs benchmark in the nonreciprocity strength, and closed-form analytical design rules that convert first-principles trends into material-selection criteria for both nonreciprocity strength and operational bandwidth.

(9) of the main text. p. 7
Where the paper says it

In the single-band Drude limit and for ωc ≪ ωp, the real part of εxx crosses zero at the screened plasma frequency ω0 ≈ ωp/ √ ε∞, producing the narrow nonreciprocal peak seen in Fig. 2 of the main text.

The total peak contrast scales as ∆max ∝ g/(ε′′d)p, p ∈ [1, 3/2], which is Eq. p. 3
Where the paper says it

(a) Nonreciprocity strength scaling [Eq. (8)]: peak nonreciprocal contrast ∆max vs.

(8) of the main text. p. 7
Where the paper says it

In the single-band Drude limit and for ωc ≪ ωp, the real part of εxx crosses zero at the screened plasma frequency ω0 ≈ ωp/ √ ε∞, producing the narrow nonreciprocal peak seen in Fig. 2 of the main text.

p. 7
Where the paper says it

In the single-band Drude limit and for ωc ≪ ωp, the real part of εxx crosses zero at the screened plasma frequency ω0 ≈ ωp/ √ ε∞, producing the narrow nonreciprocal peak seen in Fig. 2 of the main text.

The four mechanisms map directly onto the three model assumptions, and every deviation is traceable to a specific, identifiable breakdown of assumptions Diagonal optical anisotropy (a) and real-dominated gyrotropy (d) act on the strength panel Multiple ENZ crossings (b) act on the bandwidth panel, broadening the response above the line The absence of an ENZ case (c) has no coordinate and is omitted from that figure. Real-dominated gyrotropy measures only the imaginary part of a real-dominated off-diagonal response, and with high loss, ∆max is suppressed and the point falls below it.

The full material-parameter and dielectric-tensor database underlying these tables is available as an interactive viewer at https://okongoyango.github.io/Nonreciprocal Thermal Material Database/ The paper is 2606.14861. EVERY sentence must end with a reference token. p. 3

Where the paper says it

Sweeping µ provides both experimental doping/gating advice and independent (g/ε′′ d , ∆max) and (ε ′′ d /β, ∆ω) data to examine our scaling laws. Figure 3 shows the outcome: on both the strength and bandwidth panels, most data points fall on the gray dashed slope-one reference line, confirming Eqs.

The generalized bianisotropic constitutive relations are D(ω, r) B(ω, r) = ε(ω) ξ(ω) ζ(ω), where ε, µ, ξ, and ζ are 3×3 tensors representing the permittivity, permeability, and magneto-electric coupling For the magnetic topological materials studied here, the primary driver of nonreciprocal behavior is the anomalous Hall conductivity originating from the band topology The total field within the layer l is then expanded as a linear superposition of these eigenmodes.

The nonreciprocal contrast factorizes as ∆(ω, θ) ≈ 8 f(ω) G(κ, θ) The material dependence is carried entirely by f(ω) = −Re(n 2vγ∗)/nv4 The nonreciprocal contrast factorizes as ∆tan(ω, θ) = 8 f(ω) tan θ, f(ω) ≡ -Re(n 2vγ∗)/nv4 This compact form tracks the exact ∆ closely across θ ∈ [5◦, 85◦] — reproducing the two-peak structure, the peak positions, and the bandwidth — although the peak amplitude can differ by up to tens of percent. The stabilization parameter κ is a material scalar evaluated at ω0; its weak ω dependence is subleading at the scaling-analysis order of interest The total peak contrast is ∆max = 8 fmax(x, ε′′d) Gmax(κ), where Gmax(κ) is the closed-form geometric maximum The strength and bandwidth scaling laws are Eq. p. 9

Where the paper says it

The stabilization parameter κ is a material scalar evaluated at ω0; its weak ω dependence is subleading at the scaling-analysis order of interest. Equations (D6)–(D8) together establish that the nonreciprocal contrast ∆(ω, θ) cleanly separates into a material kernel f(ω) — developed in the 3-parameter ENZ model of the next subsection — and an angular shape function G(κ, θ) whose closed-form extremization is deferred to Appendix D 5.

(8) and (9), which are the main results of our new material design principles. The bandwidth law is ∆ω = ε′′d W(x)β, which establishes Eq. (9) of the main text The total peak contrast scales as ∆max ∝ g/(ε′′d)p, p ∈ [1, 3/2], which is Eq. p. 7
Where the paper says it

In the single-band Drude limit and for ωc ≪ ωp, the real part of εxx crosses zero at the screened plasma frequency ω0 ≈ ωp/ √ ε∞, producing the narrow nonreciprocal peak seen in Fig. 2 of the main text.

(8) of the main text. The bandwidth law is ∆ω = ε′′d W(x)β, which establishes Eq. (9) of the main text

Appendix D 3

The reduction reproduces the spectral shape, the peak positions, and the bandwidth of the nonreciprocal feature The benchmark is Co3Sn2S2 at µ = −0.17 eV, which has purely imaginary off-diagonal gyrotropy (Re εxz = 0). p. 9

Where the paper says it

The benchmark is Co3Sn2S2 at µ = −0. 17 eV, which has purely imaginary off-diagonal gyrotropy (Re εxz = 0).

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Predictive Material Discovery Framework: The improved AI system can utilize a predictive DFT-Kubo-Maxwell framework to identify candidate materials for nonreciprocal thermal radiation by calculating first-principles electronic structures, conductivity tensors, and subsequently predicting strong and broadband nonreciprocity in magnetic topological materials like Co3Sn2S2.

  2. Universal Material Design Rules: The AI system can apply closed-form analytical design rules derived from the factorized scaling laws, specifically using the material figure of merit g/epsilon''d to predict the maximal nonreciprocity and epsilon''d/beta to predict the operational bandwidth for any given material structure.

  3. Outlier Mechanism Diagnosis: The AI system can diagnose deviations from universal scaling laws by mapping them directly onto four physically transparent mechanisms, such as diagonal optical anisotropy or multiple ENZ crossings, allowing it to identify where richer optical response can be exploited beyond the minimal three-parameter model.

Abstract

Breaking reciprocity in thermal radiation opens opportunities for energy harvesting, sensing, and thermal management. Traditional nonreciprocal radiative semiconductor devices need external magnetic field. In this work, we predict a series of magnetic topological materials for magnetic-field-free nonreciprocal thermal radiation in the infrared regime, by combining first-principles calculations with Maxwell electrodynamics. We find strong and broadband nonreciprocity in magnetic Weyl semimetals (e.g., Co 3 Sn 2 S 2), outperforming the conventional semiconductor such as InAs. Furthermore, we propose universal material design recipes: strong nonreciprocity requires a large anomalous Hall response relative to the optical loss, whereas the broadband response favors large optical loss and small dielectric dispersion. Our work establishes a predictive materials-discovery framework and quantitative design rules for next-generation magnet-free nonreciprocal thermal devices.

Sources

Related papers