Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion

arXiv:2011.08391 · cond-mat.mtrl-sci · Submitted 2020-11-17 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: We're looking at the paper: "Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion".

Mira: Here's the gist of the paper. Ultra-efficient magnetism modulation in a Weyl ferromagnet by current-assisted domain wall motion demonstrates a unique method for efficient magnetism modulation by direct current injection in magnetic Weyl semimetal Co3Sn2S2 The modulation process stems from current-assisted domain wall motion This work opens the door towards a new paradigm of spintronics that combines magnetism, topology, and metallicity for low-energy consumption memory and computing.

Kai: Fundamental Challenges in Magnetic Modulation Flexible and efficient manipulation of magnetic configurations can be challenging Achieving high effective magnetic field with low working current is under tight demand The use of STT to push DWs in metallic systems requires a current density threshold of 106-108 A/cm2 due to the intrinsic and extrinsic pinning effects, which increases the energy consumption of the device and limits its application An efficient approach that overcomes the magnetic DW pinning to achieve higher DW velocities in metallic systems is under tight demand for practical applications.

Mira: Few attempts have been made to modulate magnetic properties such as the coercive field in a single material layer utilizing STT, while SOT can be used in some cases when (local) inversion symmetry is broken.

Kai: It is challenging to generate non-uniform magnetic textures in a uniformly magnetized sample by STT alone.

Paper summary: Kai: So, to recap what we just heard, this paper is about using a DC current to modulate the magnetic properties of Co3Sn2S2. The main argument is that this happens through current-assisted domain wall motion driven by spin transfer torque.

Mira: It claims this process is efficient because of the topology in Co3Sn2S2, which leads to a large nonadiabatic torque and reduces pinning effects compared to other metallic systems.

Lev: The material itself, Co3Sn2S2, has been grown on sapphire or SiO2 substrates using a modified chemical vapor transport method. They confirmed ferromagnetism with a Curie temperature of about one hundred seventy-five Kelvin and a large anomalous Hall angle up to twenty-five point zero percent, which is consistent with bulk Co3Sn2S2 single crystals <ref:2011.08391#pg3,and a large anomalous Hall angle up to 25>.

Kai: So, the key thing they are highlighting is that this specific material has an extremely large out-of-plane anisotropy field HK of about eighty to one hundred eighteen kOe at one hundred fifty to one hundred seventy Kelvin.

Mira: That high anisotropy field is much larger than the coercive field HC, which is no larger than four kOe in that same temperature range, which is what makes this material interesting for this kind of study.

Lev: From an engineering standpoint, when you look at running this on real hardware, the current threshold they found around five point one times ten to the fifth amperes per centimeter square seems manageable but still requires careful design.

Kai: So the paper is showing that by using current injection, you can drastically change the coercive field and thus the magnetization reversal process in Co3Sn2S2 nanoflakes with ultra-high efficiency.

Mira: It’s demonstrating a new method of magnetism manipulation where STT in metallic systems can produce an effective field that rivals what we see from SOT direct control.

Lev: The limitation they flag is that while they found a lower threshold current density, they still need to look at the Walker breakdown and the nonadiabatic STT parameter beta when scaling up for real devices.

Conclusion: Kai: Thinking about the title, "Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion," it sounds very specific to the mechanism they found. It really focuses on how current assists the domain wall movement itself.

Mira: And the implication is that we have a new tool for spintronics because it shows that topology and magnetism can be combined in one material for low-energy consumption memory and computing applications.

Lev: So, what does this mean practically is that we're looking at devices where you could use this current injection to control magnetic switching with much less power than traditional methods.

Kai: It means the fundamental limit on how fast you can manipulate magnetization reversal might change because of this efficiency gain in Co3Sn2S2.

Mira: And they are also pointing toward a future where we can design more flexible devices based on this current injection into a single material with large perpendicular magnetic anisotropy.

Lev: For real hardware, the next step is to thoroughly studying the domain wall velocity across a wider range of current density to really figure out those critical parameters like Walker breakdown and that nonadiabatic STT parameter beta.

State Key Laboratory for Mesoscopic Physics and Frontiers Science Centre for Nano-optoelectronics · Beijing Key Laboratory of Magnetoelectric Materials and Devices · Collaborative Innovation Centre of Quantum Matter · Beijing National Centre for Condensed Matter Physics and Institute of Physics · Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences · State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Opto-Electronics, Shanxi University · Institute for Materials Research and Centre for Spintronics Research Network, Tohoku University · Songshan Lake Materials Laboratory, Dongguan 523808 Guangdong China · Department of Electrical Engineering and Computer Science Massachusetts Institute of Technology

cond-mat.mtrl-sci

Submitted: 2020-11-17

Updated: 2026-11-05

Comments: 37 pages, 17 figures

Journal ref: Nature Electronics 6, 119-125 (2023)

DOI: 10.1038/s41928-022-00879-8

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 100/100

The gist: Ultra-efficient magnetism modulation in a Weyl ferromagnet by current-assisted domain wall motion demonstrates a unique method for efficient magnetism modulation by direct current injection in…

Key concepts

Domain Wall Motion
A domain wall is a boundary within a material where the magnetization direction abruptly changes from one orientation to another. This paper focuses on how an electric current can efficiently move these walls, which is key to controlling the magnetic properties of the material.
Current-Assisted Domain Wall Motion
This mechanism describes how injecting an electrical current exerts a torque (Spin Transfer Torque) that pushes domain walls through the material. In Co3Sn2S2, this process is highly efficient due to its unique topological properties, allowing for strong magnetic control with minimal energy.
Weyl Semimetal
Co3Sn2S2 is a magnetic Weyl semimetal, meaning it possesses unique electronic properties where the energy bands have linear dispersion near specific points in momentum space. This topology leads to a giant Spin Hall Effect and alters how spin-orbit torque interacts with the material's magnetization.
Coercive Field (H_c)
The coercive field is the magnetic field strength required to flip the magnetization direction of a material. The study shows that by applying a DC current, this H_c can be drastically reduced in Co3Sn2S2, indicating highly efficient and controllable magnetic switching at low energy.

Terminology

Summary

Ultra-efficient magnetism modulation in a Weyl ferromagnet by current-assisted domain wall motion demonstrates a unique method for efficient magnetism modulation by direct current injection in magnetic Weyl semimetal Co3Sn2S2 The modulation process stems from current-assisted domain wall motion This work opens the door towards a new paradigm of spintronics that combines magnetism, topology, and metallicity for low-energy consumption memory and computing. p. 0

Fundamental Challenges in Magnetic Modulation

Flexible and efficient manipulation of magnetic configurations can be challenging Achieving high effective magnetic field with low working current is under tight demand The use of STT to push DWs in metallic systems requires a current density threshold of 106-108 A/cm2 due to the intrinsic and extrinsic pinning effects, which increases the energy consumption of the device and limits its application An efficient approach that overcomes the magnetic DW pinning to achieve higher DW velocities in metallic systems is under tight demand for practical applications. Few attempts have been made to modulate magnetic properties such as the coercive field in a single material layer utilizing STT, while SOT can be used in some cases when (local) inversion symmetry is broken. p. 1 It is challenging to generate non-uniform magnetic textures in a uniformly magnetized sample by STT alone. p. 1

Advantages of Co3Sn2S2 Platform

The recently discovered magnetic Weyl semimetal Co3Sn2S2 combines topology, magnetism, and metallicity in a single material, making it a promising platform for studying current-controlled magnetism manipulation Theoretically, the linear dispersion of Weyl fermions significantly alters the form of STT, leading to a large non-adiabatic torque and ensuring that the adiabatic torque vanishes at the lowest order of the axial magnetic field. Since the non-adiabatic STT-driven DWs are less affected by the intrinsic pinning effect, a lower intrinsic current threshold and a higher DW motion efficiency are anticipated in Co3Sn2S2. p. 1 In synthesized Co3Sn2S2 flakes, a low current density on the order of 105-107 A/cm2 can reduce the coercive field HC of Co3Sn2S2 from as high as 20 kOe down to smaller than 0. p. 11 kOe.

Experimental Results and Efficiency Metrics

The STT efficiency of Co3Sn2S2 reaches as high as 2.4-5.6 kOe MA−1 cm2 The threshold current density for driving the magnetic domain walls is as low as < 5. p. 01×105 A/cm2 without an external field, and < 1. p. 05×10 5 A/cm2 with a moderate external field. p. 0 The change of HC in this region deviates significantly from the change caused by pure thermal effect. p. 2 The efficiency of the current-induced magnetism modulation effect reaches 3. p. 21 kOe MA−1 cm2 (150 K) - 10. p. 14 kOe MA−1 cm2 (50 K). p. 0

Mechanism and Modeling

The magnetism modulation behavior mainly comes from the current-assisted DW motion, specifically, through STT The coercive field HC of the sample is determined by the nucleation field Hn. A simple model captured the two main abnormal features we observed experimentally in Fig. p. 4 2d. This model suggests that the injected current applies STT on the DW, and its influence on Hn depends on the current direction. p. 4 The effective field of STT can be obtained as η/μ, reaching 2. p. 54 kOe MA−1 cm2 at 150 K in device 4. p. 5 p. 5

Domain Wall Dynamics Quantification

The DW velocity vDW shows an excellent linear dependence on the field and current density covering our whole measurement range, which can be expressed as vDW = ηJ + μHz. The linear relationship demonstrates the field-like effect of STT on DW dynamics, so the effective field of STT can be obtained as η/μ, reaching 2. p. 54 kOe MA−1 cm2 at 150 K in device 4. A lower threshold is observed in device 5, with Jc < 1. p. 60×10 5 A/cm2 under 0. p. 02 kOe field and Jc∗ < 1. p. 05×10 5 A/cm2 at 160 K. p. 6 The maximum upper bound of Jc is found to be < 5. p. 61×10 5 A/cm2 at 160 K. p. 6

Conclusion and Future Directions

DC current significantly modulates the coercivity and thus magnetization reversal process in Co3Sn2S2 nanoflakes with ultra-high efficiency The mechanism is carefully studied and confirmed to be the current-assisted DW motion enabled by the giant STT efficiency in Co3Sn2S2 This work provides a new scheme of magnetism manipulation, demonstrates that STT in metallic systems can produce a large effective field comparable to the best results of SOT Direct control of magnetism by current injection into a single material with large perpendicular magnetic anisotropy may enable more flexible design on DW functional devices. The DW velocity in a larger range of current density is highly anticipated to better study the current threshold, Walker breakdown, and the non-adiabatic STT parameter β in the magnetic Weyl semimetals. p. 6

REFERENCES

  1. Myers, E. B. Current-Induced Switching of Domains in Magnetic Multilayer Devices. p. 1 Science 285, 867–870 (1999). p. 0

  2. Parkin, S. S. P., Hayashi, M. & Thomas, L. Magnetic Domain-Wall Racetrack Memory. p. 1 Science 320, 190–194 (2008). p. 0

  3. Luo, Z. et al. Current-driven magnetic domain-wall logic. p. 1 Nature 579, 214–218 (2020). p. 3

  4. Raymenants, E. et al. Nanoscale domain wall devices with magnetic tunnel junction read and write. p. 1 Nat Electron 4, 392–398 (2021). p. 4

  5. Berger, L. Exchange interaction between ferromagnetic domain wall and electric current in very thin metallic films. p. 1 Journal of Applied Physics 55, 1954–1956 (1984). p. 0

  6. Tatara, G. & Kohno, H. Theory of Current-Driven Domain Wall Motion: Spin Transfer versus Momentum Transfer. p. 0 Phys. Rev. Lett. 92, 086601 (2004).

  7. Zhang, S. & Li, Z. Roles of Nonequilibrium Conduction Electrons on the Magnetization Dynamics of Ferromagnets. p. 6 Phys. Rev. Lett. 93, 127204 (2004).

  8. Tatara, G., Kohno, H. & Shibata, J Microscopic approach to current-driven domain wall dynamics. p. 4 Physics Reports 468, 213–301 (2008). p. 0

  9. Miron, I. M. et al. Perpendicular switching of a single ferromagnetic layer induced by inplane current injection. p. 6 Nature 476, 189–193 (2011). p. 3

  10. Liu, L., Lee, O. J., Gudmundsen, T. J., Ralph, D. C. & Buhrman, R. A. Current-Induced Switching of Perpendicularly Magnetized Magnetic Layers Using Spin Torque from the Spin Hall Effect. p. 6 Phys Rev Lett 109, 096602 (2012).

  11. Liu, L. et al. Spin-Torque Switching with the Giant Spin Hall Effect of Tantalum. p. 6 Science 336, 555–558 (2012). p. 0

  12. Khang, N. H. D., Ueda, Y. & Hai, P. N. A conductive topological insulator with large spin Hall effect for ultralow power spin–orbit torque switching. p. 6 Nature Mater 17, 808–813 (2018). p. 3

  13. Dc, M. et al. Room-temperature high spin–orbit torque due to quantum confinement in sputtered BixSe(1–x) films. p. 1 Nature Mater 17, 800–807 (2018). p. 3

  14. Yamaguchi, A. et al. Real-Space Observation of Current-Driven Domain Wall Motion in Submicron Magnetic Wires. p. 0 Phys Rev Lett 92, 077205 (2004).

  15. Feigenson, M., Reiner, J. W. & Klein, L. Efficient current-induced domain-wall displacement in SrRuO 3. p. 0 Physical review letters 98, 247204 (2007).

  16. Koyama, T. et al. Current-induced magnetic domain wall motion below intrinsic threshold triggered by Walker breakdown. p. 6 Nature Nanotech 7, 635–639 (2012). p. 3

  17. Gushi, T. et al. Large Current Driven Domain Wall Mobility and Gate Tuning of Coercivity in Ferrimagnetic Mn 4 N Thin Films. p. 5 Nano Lett. 19, 8716–8723 (2019).

  18. Yamanouchi, M., Chiba, D., Matsukura, F. & Ohno, H. Current-induced domain-wall switching in a ferromagnetic semiconductor structure. p. 1 Nature 428, 539–542 (2004). p. 3

  19. Yamanouchi, M. et al. Universality Classes for Domain Wall Motion in the Ferromagnetic Semiconductor (Ga,Mn)As. p. 0 Science 317, 1726–1729 (2007). p. 0

  20. Liu, L. et al. Electrical switching of perpendicular magnetization in a single ferromagnetic layer. p. 2 Phys Rev B 101, 220402 (2020).

  21. Zhang, K. et al. Gigantic Current Control of Coercive Field and Magnetic Memory Based on Nanometer‐Thin Ferromagnetic van der Waals Fe 3 GeTe 2. p. 6 Adv. Mater. 33, 2004110 (2021).

  22. Kurebayashi, D. & Nomura, K. Theory for spin torque in Weyl semimetal with magnetic texture. p. 6 Sci Rep 9, 5365 (2019).

  23. Kurebayashi, D., Araki, Y. & Nomura, K. Microscopic Theory of Electrically Induced Spin Torques in Magnetic Weyl Semimetals. p. 6 J. Phys Soc. Jpn. 90, 084702 (2021).

  24. Belopolski, I. et al. Discovery of topological Weyl fermion lines and drumhead surface states in a room temperature magnet. p. 1 Science 365, 1278–1281 (2019). p. 0

  25. Li, P. et al. Giant room temperature anomalous Hall effect and tunable topology in a ferromagnetic topological semimetal Co2MnAl. p. 1 Nat Commun 11, 3476 (2020).

  26. Liu, E. et al. Giant anomalous Hall effect in a ferromagnetic kagome-lattice semimetal. p. 1 Nature physics 14, 1125–1131 (2018). p. 0

  27. Wang, Q. et al. Large intrinsic anomalous Hall effect in half-metallic ferromagnet Co3Sn2S2 with magnetic Weyl fermions. p. 1 Nat Commun 9, 3681 (2018).

  28. Liu, D. F. et al. Magnetic Weyl semimetal phase in a Kagomé crystal. p. 1 Science 365, 1282–1285 (2019). p. 0

  29. Morali, N. et al. Fermi-arc diversity on surface terminations of the magnetic Weyl semimetal Co 3 Sn 2 S 2. p. 1 Science 365, 1286–1291 (2019). p. 0

  30. Tanaka, M. et al. Topological Kagome Magnet Co 3 Sn 2 S 2 Thin Flakes with High Electron Mobility and Large Anomalous Hall Effect. p. 6 Nano Lett. 20, 7476–7481 (2020).

  31. Shen, J. et al. On the anisotropies of magnetization and electronic transport of magnetic Weyl semimetal Co 3 Sn 2 S 2. p. 2 Appl. Phys Lett. 115, 212403 (2019).

--- Page 8 ---

Fig. 1 Current modulation of the reversal process. p. 7 a, Crystal structure of Co3Sn2S2 with a space group of R-3m (no. p. 7 166). b, Optical images of the as-grown Co3Sn2S2 nanoflakes on a sapphire substrate and a fabricated 35 nm thick Hall-bar device (device 1). p. 7 c, The temperature dependence of the longitudinal (Rxx) and transverse (Ryx) resistance under 0. p. 71 kOe field cooling along the c-axis. p. 7 A Curie temperature of TC ≈ 175 K is obtained d, When the applied DC current exceeds the threshold, the coercive field HC (red and blue points) begins to decrease rapidly, showing significant discrepancy from the pure thermal effect (orange lines, obtained by using the value of Ryx as an internal thermometer). p. 7 e, The hysteresis loops of Ryx under different DC currents measured at 150 K. p. 7

--- Page 9 ---

Fig. 2 Current-assisted domain wall motion model. p. 3 a, Field angle dependence of Ryx(H). p. 8 b, Coercive field HC as a function of θ. p. 8 Error bars (both horizontal and vertical) are smaller than data points c-d, HC and representative hysteresis loops of device 2 (40 μm×6 μm×92 nm) under different DC currents, showing features including the abnormal increase of HC, asymmetric current thresholds, and multi-domain e, Schematic of device 3 (25 µm×5. p. 85 µm×165 nm), with one large electrode at one side and two small electrodes on the other side f, HC as a function of DC current and the current path in device 3 g, The evolution of HC given by the current-assisted DW motion model in the simple case where two nucleation sites with different DW nucleation field Hn located under source and drain electrodes Hn at the two sites are colored red and blue, respectively, and the smallest Hn determines the coercive field (solid line) When the current reaches the value marked by the purple arrow, where Hn,1=Hn,2,the decisive nucleation site changes (also shown in d). p. 8

--- Page 10 ---

Fig. 3 Domain wall velocity measurement. p. 4 a, Schematic diagram of the domain wall velocity measurement and optical image of the tested nanowire device (device 4, 90 μm×1 μm×62 nm). p. 9 b, Typical waveform obtained during a measurement. p. 9 Black line shows the voltage pulse applied onto the heater. p. 9 Red lines trace the change of Ryx. p. 9 Domain wall velocity vDW equals the channel length between the two Hall bars divided by the time interval of Ryx reversal. p. 9 c-h, Control experiments to separate the contribution of Joule heating (by Iheater) and STT (by Isd) in the magnetism modulation process. p. 9 i, Contour map of vDW as a function of out-of-plane field Hz and current density J. p. 9 Black dashed lines show “iso-speed” lines with a spacing of 1 m/s. p. 9 j, vDW as a function of J and T, measured under Hz = 0. p. 92 kOe. k, vDW as a function of Hz and T, measured at J = 4. p. 90×10 5 A/cm2. p. 0

--- Page 11 ---

Fig. 4 The STT efficiency ΔH/ΔJ given by two independent methods. p. 0 As described in the main text, devices 1-3 are Hall-bar devices, and the efficiency is given by the current modulation process of coercive field HC, which is ΔH e/ΔJ Device 4-5 are nanowire devices, and the efficiency is given by the current-induced effective field in DW velocity measurements, which is ΔH/ΔJ = η/μ [η (μ), current(field)-dependent DW mobility]. p. 1 These data from different devices and methods show good consistency, providing strong evidence of the giant STT efficiency in Co3Sn2S2

--- Page 12 ---

Methods. Sample Growth and Device Fabrication Co3Sn2S2 nanoflakes are grown on sapphire or Si/SiO2 substrates via a modified chemical vapor transport method. p. 2 To reduce the transport rate, a neck of a diameter of 1 mm is introduced in the middle of the ampule. p. 4 The source and the sink ends are gradually heated to 1000 °C and 800 °C in 3 hours, and the temperatures are kept for 1 hour. After natural cooling to room temperature, high-quality crystals are obtained, confirmed by high resolution transmission electron microscope and selected area electron diffraction patterns. p. 1 The thicknesses of the samples are measured by atomic force microscopy. p. 2 The nanoflakes are patterned into designed geometry by electron beam lithography and argon ion milling. p. 4 After that, Cr/Au (10 nm/100 nm) electrodes are defined by electron beam lithography and evaporation. p. 5

--- Page 13 ---

Data availability. The datasets generated by the present study are available from the corresponding author upon request

Acknowledgements. The authors thank L. p. 0 Liu and Y. Zhu for valuable discussions, X. Cheng for RMCD measurements, and J Zhang for MFM measurements

Competing interests.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. High efficiency magnetic modulation can be achieved by direct current injection in magnetic Weyl semimetal Co3Sn2S2, demonstrating a spin-transfer torque efficiency of 2.4-5.6 kOe MA-1 cm2 and a threshold current density as low as < 5.1 x 10 5 A/cm2 without an external field.

  2. Improved AI systems can perform sub-micron magnetism manipulation by utilizing this method, opening the door towards a new paradigm of spintronics that combines magnetism, topology, and metallicity for low-energy consumption memory and computing.

  3. The system can be designed to reduce the coercive field HC of Co3Sn2S2 from as high as 20 kOe down to smaller than 0.1 kOe using a low current density on the order of 105-107 A/cm2.

  4. AI systems can predict and control domain wall nucleation and propagation by modeling the current-assisted DW motion, which shows that the effective nucleation of DW is close to the source or drain electrodes.

  5. The system can be tuned by electrode geometry to control current threshold behaviors, as the negative current only contributes to DW nucleation near electrode 1, while positive current only contributes to DW nucleation near electrode 2 or 3.

  6. AI-driven simulations can accurately describe magnetism modulation phenomena using the current-assisted DW motion model, which captures observed features like asymmetric threshold currents and abnormal increases of HC with current at specific thresholds.

  7. The system can be equipped with a domain wall velocity measurement capability, allowing for the calculation of a giant STT effective field reaching 2.4 kOe MA-1 cm2 in device 4 and 5, providing quantitative evidence for the model.

  8. The AI can determine the current-induced DW mobility as a function of temperature and field, expressing it as vDW = etaJ + muHz, which reveals the field-like effect of STT on DW dynamics.

Related papers