Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion

summary

The gist

Ultra-efficient magnetism modulation in a Weyl ferromagnet by current-assisted domain wall motion demonstrates a unique method for efficient magnetism modulation by direct current injection in…

In short

This research demonstrated ultra-efficient magnetism modulation in magnetic Weyl semimetal Co3Sn2S2 using direct current injection to drive domain wall motion. The findings show that a low current density can significantly reduce the material's coercive field, opening a new path for low-energy spintronics combining magnetism and topology.

Key concepts

Domain Wall Motion
A domain wall is a boundary within a material where the magnetization direction abruptly changes from one orientation to another. This paper focuses on how an electric current can efficiently move these walls, which is key to controlling the magnetic properties of the material.
Current-Assisted Domain Wall Motion
This mechanism describes how injecting an electrical current exerts a torque (Spin Transfer Torque) that pushes domain walls through the material. In Co3Sn2S2, this process is highly efficient due to its unique topological properties, allowing for strong magnetic control with minimal energy.
Weyl Semimetal
Co3Sn2S2 is a magnetic Weyl semimetal, meaning it possesses unique electronic properties where the energy bands have linear dispersion near specific points in momentum space. This topology leads to a giant Spin Hall Effect and alters how spin-orbit torque interacts with the material's magnetization.
Coercive Field (H_c)
The coercive field is the magnetic field strength required to flip the magnetization direction of a material. The study shows that by applying a DC current, this H_c can be drastically reduced in Co3Sn2S2, indicating highly efficient and controllable magnetic switching at low energy.

Terminology used across episodes

This episode discusses

The paper

Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion · Read on arXiv

State Key Laboratory for Mesoscopic Physics and Frontiers Science Centre for Nano-optoelectronics · Beijing Key Laboratory of Magnetoelectric Materials and Devices · Collaborative Innovation Centre of Quantum Matter · Beijing National Centre for Condensed Matter Physics and Institute of Physics · Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences · State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Opto-Electronics, Shanxi University · Institute for Materials Research and Centre for Spintronics Research Network, Tohoku University · Songshan Lake Materials Laboratory, Dongguan 523808 Guangdong China · Department of Electrical Engineering and Computer Science Massachusetts Institute of Technology

DOI: 10.1038/s41928-022-00879-8

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: We're looking at the paper: "Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion".

Mira: Here's the gist of the paper. Ultra-efficient magnetism modulation in a Weyl ferromagnet by current-assisted domain wall motion demonstrates a unique method for efficient magnetism modulation by direct current injection in magnetic Weyl semimetal Co3Sn2S2 The modulation process stems from current-assisted domain wall motion This work opens the door towards a new paradigm of spintronics that combines magnetism, topology, and metallicity for low-energy consumption memory and computing.

Kai: Fundamental Challenges in Magnetic Modulation Flexible and efficient manipulation of magnetic configurations can be challenging Achieving high effective magnetic field with low working current is under tight demand The use of STT to push DWs in metallic systems requires a current density threshold of 106-108 A/cm2 due to the intrinsic and extrinsic pinning effects, which increases the energy consumption of the device and limits its application An efficient approach that overcomes the magnetic DW pinning to achieve higher DW velocities in metallic systems is under tight demand for practical applications.

Mira: Few attempts have been made to modulate magnetic properties such as the coercive field in a single material layer utilizing STT, while SOT can be used in some cases when (local) inversion symmetry is broken.

Kai: It is challenging to generate non-uniform magnetic textures in a uniformly magnetized sample by STT alone.

Paper summary: Kai: So, to recap what we just heard, this paper is about using a DC current to modulate the magnetic properties of Co3Sn2S2. The main argument is that this happens through current-assisted domain wall motion driven by spin transfer torque.

Mira: It claims this process is efficient because of the topology in Co3Sn2S2, which leads to a large nonadiabatic torque and reduces pinning effects compared to other metallic systems.

Lev: The material itself, Co3Sn2S2, has been grown on sapphire or SiO2 substrates using a modified chemical vapor transport method. They confirmed ferromagnetism with a Curie temperature of about one hundred seventy-five Kelvin and a large anomalous Hall angle up to twenty-five point zero percent, which is consistent with bulk Co3Sn2S2 single crystals <ref:2011.08391#pg3,and a large anomalous Hall angle up to 25>.

Kai: So, the key thing they are highlighting is that this specific material has an extremely large out-of-plane anisotropy field HK of about eighty to one hundred eighteen kOe at one hundred fifty to one hundred seventy Kelvin.

Mira: That high anisotropy field is much larger than the coercive field HC, which is no larger than four kOe in that same temperature range, which is what makes this material interesting for this kind of study.

Lev: From an engineering standpoint, when you look at running this on real hardware, the current threshold they found around five point one times ten to the fifth amperes per centimeter square seems manageable but still requires careful design.

Kai: So the paper is showing that by using current injection, you can drastically change the coercive field and thus the magnetization reversal process in Co3Sn2S2 nanoflakes with ultra-high efficiency.

Mira: It’s demonstrating a new method of magnetism manipulation where STT in metallic systems can produce an effective field that rivals what we see from SOT direct control.

Lev: The limitation they flag is that while they found a lower threshold current density, they still need to look at the Walker breakdown and the nonadiabatic STT parameter beta when scaling up for real devices.

Conclusion: Kai: Thinking about the title, "Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion," it sounds very specific to the mechanism they found. It really focuses on how current assists the domain wall movement itself.

Mira: And the implication is that we have a new tool for spintronics because it shows that topology and magnetism can be combined in one material for low-energy consumption memory and computing applications.

Lev: So, what does this mean practically is that we're looking at devices where you could use this current injection to control magnetic switching with much less power than traditional methods.

Kai: It means the fundamental limit on how fast you can manipulate magnetization reversal might change because of this efficiency gain in Co3Sn2S2.

Mira: And they are also pointing toward a future where we can design more flexible devices based on this current injection into a single material with large perpendicular magnetic anisotropy.

Lev: For real hardware, the next step is to thoroughly studying the domain wall velocity across a wider range of current density to really figure out those critical parameters like Walker breakdown and that nonadiabatic STT parameter beta.

More episodes

← Home