Multiband Hybrid Metasurface for Enhanced Second-Harmonic Generation via Coupled Gap Surface Plasmon Modes
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: We're looking at the paper: "Multiband Hybrid Metasurface for Enhanced Second-Harmonic Generation via Coupled Gap Surface Plasmon Modes".
Mira: Here's the gist of the paper. A multiband hybrid metasurface supporting multiple gap-surface plasmon (GSP) and localized surface plasmon (LSP) modes is presented.
Kai: The proposed architecture integrates a metallic bar and a metallic disc into the top layer of a metal–dielectric–metal configuration, forming a coupled hybrid resonator.
Mira: Optimized geometrical parameters yield four distinct resonances across the nearinfrared and telecommunication bands, arising from the interplay between GSP modes and LSP excitations.
Kai: The proposed metasurface provides a compact platform for multiband and multifunctional nanophotonic applications.
Title and authors: Kai: So we're looking at this paper titled "Multiband Hybrid Metasurface for Enhanced Second-Harmonic Generation via Coupled Gap Surface Plasmon Modes". It’s by Partha Mondal and his team, and the basic idea is using a bar disc hybrid resonator to get multiple resonances across different bands.
Mira: Yeah, it’s about this structure that uses a metal dielectric metal stack with a bar and a disc patterned on top. The big claim here is that you can get four distinct resonances across both near-infrared and telecommunication bands at the same time because of how gap surface plasmon modes and localized surface plasmon modes interact.
Lev: From an engineering standpoint, I’m interested in how they achieved that multiband operation, especially since we usually have to tune things one mode at a time on actual hardware.
Kai: Right, so the paper details the structure—an aluminum bottom layer, then silicon dioxide spacer, and this bar disc hybrid resonator built into the top aluminum layer—and shows how changing dimensions like the bar width or the separation distance d1 and disc radius r1 shifts those resonance wavelengths lambda two through lambda four.
Mira: The summary explains that they found four specific resonances: lambda one has a narrow linewidth with a full-width at half maximum of approximately four point seven nanometers and nearly unity absorptance, which is pretty good because it gives us a quality factor of Q equal to one hundred ninety.
Lev: A Q factor of one hundred ninety sounds manageable for simulation, but I wonder how that translates when you actually fabricate this on a chip with the surface roughness they mention later.
Kai: Exactly, and then they move into the nonlinear part. They numerically investigated second harmonic generation, or SHG, and found enhanced SH emission at those resonance wavelengths because of strong field confinement inside that metal dielectric metal cavity.
Mira: The efficiency numbers are interesting: for modes pi and piii, they calculated conversion efficiencies on the order of ten to the power of negative twelve, while for pii it’s around ten to the power of negative thirteen, and piv is about ten to the power of negative fifteen at a peak pump intensity of two point eight five mega-watts per centimeter squared.
Title and authors: Lev: Ten to the power of minus fifteen is quite low for a practical device, so where does that leave us in terms of running this on real hardware? I need to know if we're talking about femtosecond pulses or something more manageable.
Kai: The paper also points out that the maximum SHG intensity actually comes from the localized surface plasmon dominated pi resonance, while the minimum response occurs at the piv mode, which is an important detail for designing a specific nonlinear sensor.
Mira: And they noted that increasing the bar width a1 causes those lambda two through lambda four to redshift, which means you're effectively increasing that lateral cavity length controlling those gap-related modes.
Lev: So if we are trying to use this for something like an optical switch, shifting the wavelengths by changing the geometry sounds like it gives us a degree of control over the output spectrum.
Kai: It does, and they showed how variations in d1 and r1 significantly modify those spectral positions, confirming that electromagnetic coupling and that gap-related confinement are really what shape these hybrid resonances.
Mira: They also addressed robustness by including a conformal four nanometer aluminum dioxide layer, which only caused a minimal spectral shift in the resonance wavelengths, showing the structure is pretty resilient against the native oxide layer.
Lev: That resilience is key for fabrication, because if every small process step shifts your operating wavelength significantly, you’ve got a headache.
Kai: So to wrap up this part of the paper: it demonstrates that a multiband GSP-based metasurface with a bar disc hybrid resonator can support four distinct resonances across both near-infrared and telecommunication bands by controlling the interplay between gsp and lsp modes.
Mira: This capability means we have a compact platform for applications needing both multiband operation and enhanced nonlinear light matter interactions, which is pretty versatile.
Lev: I think the main hurdle we see here is getting that high quality factor of one hundred ninety realized experimentally without losing too much to fabrication disorder, but the confinement mechanism they describe seems sound.
Kai: We’ll see how close the experimental Q factors get to those simulations when we start building prototypes, and then we'll look at how this multiband capability helps us control fields across different frequencies.
Title and authors: Mira: And as we move forward, it opens up avenues for designing AI systems that can perform broadband nonlinear optical response control by utilizing these metasurfaces that support multiple resonances across near-infrared and telecommunication bands.
Lev: That sounds like a real goal—using the structure itself to tune complex nonlinear responses across a wide spectrum.
Kai: And we can also design an AI system for polarization-dependent manipulation of electromagnetic fields across extended frequency ranges because those resonance peaks are quite sensitive to the polarization state when you change the incident electric field angle.
Mira: So, in summary, this paper on "Multiband Hybrid Metasurface for Enhanced Second-Harmonic Generation via Coupled Gap Surface Plasmon Modes" shows a way to engineer specific coupled gap surface plasmon modes and localized surface plasmon modes to get four distinct resonances across near-infrared and telecommunication bands.
Lev: And while the simulation results are compelling, we have to keep in mind that the authors admit that experimental measurements of the fabricated metasurface show good agreement with numerical predictions, but there are losses introduced by surface roughness and fabrication disorder.
Kai: That’s fair; those real-world imperfections always eat into the Q factor compared to what’s predicted in theory.
Mira: The paper also confirms that this structure provides a compact platform for multiband and multifunctional nanophotonic applications, which is a big deal for miniaturization.
Lev: It is a versatile platform, but the next step for us would be to see if we can push those SHG conversion efficiencies higher than ten to the power of negative fifteen using more sophisticated materials or geometry optimization.
Kai: We’ll keep an eye on that, because if we can improve those nonlinear efficiencies while maintaining that multiband control, it really makes this structure a strong contender for many future nanophotonic devices.
Mira: So, for anyone interested in how to tune light across different bands using these coupled modes and enhance nonlinear effects at the same time, this paper on "Multiband Hybrid Metasurface for Enhanced Second-Harmonic Generation via Coupled Gap Surface Plasmon Modes" is a good read.
Lev: Yeah, it’s solid work showing the coupling mechanism between those gsp and lsp excitations, which is crucial for understanding how to design these materials better.
The paper's summary: Kai: So we’re looking at this paper titled "Multiband Hybrid Metasurface for Enhanced Second-Harmonic Generation via Coupled Gap Surface Plasmon Modes" and the main idea is that by coupling gap surface plasmon modes and localized surface plasmon modes, you can get four different resonance points across both near-infrared and telecommunication bands in one compact structure.
Mira: Right, it’s about this specific metal dielectric metal stack with a bar disc resonator on top, where those two types of light confinement—the gap ones and the localized ones—talk to each other, which allows you to tune things over a wide frequency range.
Lev: From an engineering standpoint, that multiband operation is pretty neat because usually you have to design four separate structures for four separate frequencies if you want that kind of coverage.
Kai: Exactly. The structure itself is relatively simple—an aluminum bottom layer, then a silicon dioxide spacer, and this bar disc hybrid resonator patterned in the top aluminum layer—but it’s how those geometrical parameters like the bar width and the disc radius change the wavelengths for resonances two through four.
Mira: The analysis shows that changing those dimensions actually shifts lambda two through lambda four, which confirms that electromagnetic coupling and that gap-related confinement are really what shape those hybrid resonances.
Lev: So if you want to tune a specific frequency, you’re essentially tuning the physical shape of the resonator, which is a good thing for fabrication because it keeps the design compact.
Kai: And then they look at how this works for nonlinear light processing, specifically second harmonic generation or SHG, and they found that there’s enhanced SH emission right at those specific resonance wavelengths.
Mira: They calculated conversion efficiencies that are on the order of ten to the power of negative twelve for modes pi and piii, which is pretty good for a nonlinear device because you get strong signal at those tuned frequencies.
Lev: Ten to the power of negative twelve is a big number for simulation but it’s still low enough that we need to worry about fabrication losses when we try to run this on actual hardware.
Kai: The paper also points out that the maximum SHG intensity comes from the localized surface plasmon dominated pi resonance, while the minimum response occurs at mode piv, which is an important detail for designing a specific nonlinear sensor.
Mira: They also showed they can make this structure quite robust by adding a conformal four nanometer aluminum dioxide layer, and that only caused a minimal spectral shift in those resonance wavelengths, proving it’s pretty resilient against the native oxide layer.
Lev: That robustness is exactly what we need when we start thinking about moving from simulation to real silicon or superconducting circuits; you don't want every tiny fabrication step throwing off your entire frequency range.
Kai: So the main point here is that this multiband GSP-based metasurface with its bar disc hybrid resonator can support four distinct resonances across both near-infrared and telecommunication bands by controlling the interplay between gsp and lsp modes.
Mira: This capability means we have a compact platform for applications needing both multiband operation and enhanced nonlinear light matter interactions, which is pretty versatile.
Lev: It’s a versatile platform, but the next step for us would be to see if we can push those SHG conversion efficiencies higher than ten to the power of negative fifteen using more sophisticated materials or geometry optimization.
Kai: We’ll keep an eye on that because if we can improve those nonlinear efficiencies while maintaining that multiband control, it really makes this structure a strong contender for many future nanophotonic devices.
Mira: So, for anyone interested in how to tune light across different bands using these coupled modes and enhance nonlinear effects at the same time, this paper on "Multiband Hybrid Metasurface for Enhanced Second-Harmonic Generation via Coupled Gap Surface Plasmon Modes" is a good read.
Lev: Yeah, it’s solid work showing the coupling mechanism between those gsp and lsp excitations, which is crucial for understanding how to design these materials better.
Kai: And this kind of control over frequency and nonlinear response opens up avenues for AI systems that can perform broadband nonlinear optical response control by utilizing these metasurfaces that support multiple resonances across near-infrared and telecommunication bands.
The paper's improvements: Kai: So to wrap up, the paper suggests ways to make this system even better by focusing on those strong nonlinear interactions they found earlier.
Mira: Right, they are looking at how we can push those second harmonic generation conversion efficiencies higher than what’s currently simulated, aiming for more than ten to the power of negative fifteen.
Lev: That would mean we need to look closely at the assumptions about surface roughness and fabrication disorder because those are what usually eat into the performance in a real lab.
Kai: They suggest that by refining the geometrical parameters, specifically how you set up that bar width and disc radius, you can better control where those strong fields are located within the metal dielectric metal cavity.
Mira: That control is key because they found the maximum SHG intensity happens right at those localized surface plasmon dominated pi resonance modes, so optimizing for that mode should give us a bigger gain.
Lev: From my side, if we can reduce those fabrication uncertainties, getting higher conversion efficiency means we can start thinking about using this for more efficient light processing applications rather than just theoretical demonstrations.
Kai: They also explore how incorporating a conformal layer of aluminum dioxide, which is what they did before, could be optimized further to minimize any spectral shift while still protecting the structure.
Mira: The implication here is that we aren't just finding one good design; we are mapping out a landscape where fine-tuning the structure allows us to hit higher nonlinear performance targets across those four different resonance bands.
Lev: It means that if you want high efficiency, you have to design for both the spectral tuning and the field confinement simultaneously, which adds complexity but also gives us a more complete picture of what’s possible.
Kai: So they are moving toward a design where we can balance the multiband operation with maximizing that nonlinear output, which is really pushing what this type of metasurface can do.
Mira: And this refined understanding is important because it points toward designing next-generation nanophotonic devices that don't just work in one band but handle complex light signals across a whole spectrum while boosting the nonlinear response at each point.
Conclusion: Kai: So to wrap up, this paper on "Multiband Hybrid Metasurface for Enhanced Second-Harmonic Generation via Coupled Gap Surface Plasmon Modes" shows how you can use a bar disc hybrid resonator to get four distinct resonances across near-infrared and telecommunication bands by controlling the interplay between gap surface plasmon modes and localized surface plasmon modes.
Mira: It’s a compact platform, really, that lets you tune things over a wide frequency range while boosting the nonlinear response at each point.
Lev: For me, it means that if we can get those high conversion efficiencies up from ten to the power of negative fifteen in reality, then we could start thinking about using this for more efficient light processing applications.
Kai: And that’s because they showed that as long as you keep tuning the bar width and disc radius, you maintain that multiband operation.
Mira: The main implication is that this kind of structure is really versatile for any device needing both wide frequency coverage and strong nonlinear interactions in one place.
Lev: I just need to make sure we can scale up those Q factors without losing too much to the fabrication disorder, because that’s where most of the real hardware headaches come from.
Kai: Exactly, so it’s a good proof-of-concept that shows how this coupled mode approach works on a single meta-atom.
Mira: We should keep an eye on these improvements for designing next generation nanophotonic devices that handle complex light signals across a whole spectrum while boosting the nonlinear response at each point.
Lev: Next, we’ll be looking at how these modes can be used to generate specific polarization states, because that seems like the next logical step for practical hardware implementation.
Partha Mondal, Omar Alkhazragi, Boon S. Ooi, Hakan Bagci
King Abdullah University of Science and Technology · King Fahd University of Petroleum and Minerals
physics.optics
Submitted: 2026-03-05
Updated: 2026-05-27
Journal ref: IEEE Photonics Journal, vol. 18, no. 4, pp. 4600510-4600510, Aug. 2026, Art no. 4600510
DOI: 10.1109/JPHOT.2026.3698252
License: http://creativecommons.org/licenses/by-sa/4.0/
Importance score: 88/100
The gist: A multiband hybrid metasurface supporting multiple gap-surface plasmon (GSP) and localized surface plasmon (LSP) modes is presented.
Key concepts
- Gap Surface Plasmon (GSP)
- These are electromagnetic waves that are strongly confined within the gap between two metallic structures. In this metasurface, the metal bar and disc create a gap where light energy is tightly trapped, leading to strong light-matter interaction at specific frequencies.
- Localized Surface Plasmon (LSP)
- LSPs involve collective oscillations of electrons on the surface of a metal nanoparticle. The hybrid structure supports these modes alongside GSP modes, allowing for complex electromagnetic behavior and tuning across different spectral regions.
- Second-Harmonic Generation (SHG)
- SHG is a nonlinear optical process where two photons of lower energy combine to create one photon of higher energy (twice the original frequency). This effect is significantly enhanced at the metasurface's resonant wavelengths because the electromagnetic fields are strongly concentrated within the metal-dielectric-metal cavity.
Terminology
Summary
A multiband hybrid metasurface supporting multiple gap-surface plasmon (GSP) and localized surface plasmon (LSP) modes is presented. p. 1 Abstract
A multiband hybrid metasurface supporting multiple gap-surface plasmon (GSP)
and localized surface plasmon (LSP) modes is presented. The structure adopts a
metal–dielectric–metal configuration consisting of an aluminum bottom layer, a silicon dioxide spacer, and a bar–disc hybrid resonator patterned in the top aluminum
layer. This work presents a hybrid GSP-based metasurface design that overcomes bandwidth
limitations while enabling multiresonant operation within a single meta-atom. The proposed architecture integrates a metallic bar and a metallic disc into the top layer of a metal–
4 The structure adopts a
metal–dielectric–metal configuration consisting of an aluminum bottom layer, a silicon dioxide spacer, and a bar–disc hybrid resonator patterned in the top aluminum
layer. Optimized geometrical parameters yield four distinct resonances across the nearinfrared and telecommunication bands, arising from the interplay between GSP modes
and LSP excitations. Furthermore, the second-harmonic generation (SHG) response is
numerically investigated, revealing enhanced SH emission at the resonance wavelengths
due to strong electromagnetic field confinement within the metal–dielectric–metal cavity. The proposed metasurface provides a compact platform for multiband and multifunctional nanophotonic applications.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Structure and Configuration
The structure adopts a metal–dielectric–metal configuration consisting of an aluminum bottom layer, a silicon dioxide spacer, and a bar–disc hybrid resonator patterned in the top aluminum layer. This metal–dielectric–metal configuration enables strong electromagnetic confinement within the spacer layer, supporting GSP modes. p. 4 Unlike conventional approaches relying on independent resonators, the proposed bar–disc hybrid configuration exploits strong electromagnetic coupling between LSP and GSP modes, resulting in enhanced field confinement. Furthermore,
the metasurface exhibits enhanced SHG at multiple resonances, enabled by strong field localization within the metal-dielectric-metal cavity. The
metasurface consists of a periodic array in which each unit cell contains a bar–disc hybrid
plasmonic resonator made of aluminum (Al). These resonators are positioned above a continuous Al bottom layer that is sufficiently thick to suppress optical transmission.Where the paper says it
Where the paper says it
Resonance Characteristics and Tuning
The numerical analysis shows that the metasurface supports four distinct resonances across the near-infrared and telecommunication bands. These resonances arise from the interplay between LSP and GSP modes supported by the hybrid resonator. p. 4 Numerical analysis shows
that the metasurface supports four distinct resonances across the near-infrared and telecommunication bands. These resonances arise from the interplay between LSP and GSP modes
supported by the hybrid resonator. The proposed design is experimentally
validated, with good agreement between simulation and experiment confirmed across all
resonant modes. The dependence of the resonant behavior on structural parameters and polarization is
systematically investigated.Where the paper says it
Where the paper says it
-
The resonance at λ1 exhibits a narrow linewidth with a full-width at half maximum (FWHM) of approximately 4. p. 7
7 nm and achieves near-unity absorptance (A ≈ 1), corresponding to a quality factor of Q = 190. p. 7Where the paper says it
Four distinct resonance peaks are observed at wavelengths λ1 = 900 nm, λ2 = 990 nm, λ3 = 1075 nm, and λ4 = 1465 nm. The resonance at λ1 exhibits a narrow linewidth with a full-width at half maximum (FWHM) of approximately 4.
Where the paper says it
The resonance at λ1 exhibits a narrow linewidth with a full-width at half maximum (FWHM) of approximately 4. 7 nm and achieves near-unity absorptance (A ≈ 1), corresponding to a quality factor of Q = 190.
-
The resonance at λ2, λ3, and λ4 are broader absorption bands with peak absorptance values of 99. p. 7
4%, 99.3%, and 78.5%, respectively. p. 7Where the paper says it
7 nm and achieves near-unity absorptance (A ≈ 1), corresponding to a quality factor of Q = 190. In addition to this narrowband resonance, three broader absorption bands are observed at λ2, λ3, and λ4, with peak absorptance values of 99.
Where the paper says it
In contrast, Fig. 3(b) and 3(d) exhibits pronounced electric- and magnetic-field confinement within the dielectric spacer beneath the bar, respectively.
-
Increasing the bar width a1 results in a redshift of the resonance wavelengths λ2, λ3, and λ4, indicating an increase in the effective lateral cavity length governing the gap-related modes. p. 8
Where the paper says it
Next, the influence of the structural parameters on the absorptance spectra is examined, as shown in Fig. 7(a) shows that increasing the bar width a1 results in a redshift of the resonance wavelengths λ2, λ3, and λ4, indicating an increase in the effective lateral cavity length governing the gap-related modes.
-
Variations in the separation distance d1 and the disc radius r1 significantly modify the spectral positions of λ2, λ3, and λ4, confirming the role of electromagnetic coupling and gap-related confinement in shaping the hybrid resonances. p. 8
Where the paper says it
Variations in the separation distance d1 and the disc radius r1, as shown in Fig. 7(c) and 7(d), significantly modify the spectral positions of λ2, λ3, and λ4, confirming the role of 9
Nonlinear Optical Enhancement
The second-harmonic generation (SHG) response is numerically investigated, revealing enhanced SH emission at the resonance wavelengths due to strong electromagnetic field confinement within the metal–dielectric–metal cavity. The dominant SH polarization originates from surface regions where inversion symmetry is inherently broken in plasmonic nanostructures. p. 2 As a result, they have been widely employed in applications, such as beam steering [10–13], metalens design [14,15], hologram generation [16–18],
structural color printing [19, 20], polarization conversion [11, 21], broadband perfect absorption [22–25], and optical sensing [23, 26]. Beyond linear light–matter interactions, the strong subwavelength field confinement supported by plasmonic nanostructures enables enhanced nonlinear optical responses.Where the paper says it
-
The calculated SHG conversion efficiencies are on the order of 10−12 for modes PI and PIII, 10−13 for PII, and approximately 10−15 for PIV at a peak pump intensity of 2. p. 6
85 MW/cm2.Where the paper says it
modes can be approximately described using a Fabry-P´erot cavity model [60]: βgspw + ϕ = pπ (1) where βgsp is the in-plane propagation constant of the GSP mode in the dielectric spacer, w represents the effective lateral cavity length defined by the resonator dimensions, ϕ is the phase shift upon reflection at the resonator edges, and p is the integer mode order. To elucidate the contribution of individual resonators to the overall optical response, electromagnetic simulations of isolated bar and disc resonators are performed.
-
The maximum SHG intensity is obtained at the LSP-dominated PI resonance, whereas the minimum response occurs at the PIV mode. p. 8
Where the paper says it
6(e) and 6(i)] exhibit relatively weak magnetic-field confinement within the dielectric spacer. This field distribution is characteristic of an LSP-dominated mode supported primarily by the bar.
Experimental Validation and Performance
The fabricated sample has a footprint of 500 µm × 500 µm. Experimental measurements show good agreement with the simulation results across all resonant modes. p. 1 The reflectance spectra are systematically analyzed as functions
of geometric parameters and polarization, demonstrating tunable multiband operation. Experimental measurements of the fabricated metasurface show good agreement with
numerical predictions.Where the paper says it
-
For x-polarized illumination, the resonances are observed at wavelengths 907 nm, 1015. p. 6
5 nm, 1110.5 nm, and 1494 nm.Where the paper says it
The specific modal nature of these resonances is clarified through the field-distribution analysis presented in the following section. To verify the physical origin of the observed resonances, the corresponding electromagnetic field distributions are examined at their respective resonance wavelengths.
-
The simulated Q-factors are consistently higher than the experimental values due to losses introduced by surface roughness and fabrication-induced disorder.
-
The inclusion of a conformal 4 nm Al2O3 layer results in only a minimal spectral shift of the resonance wavelengths, confirming the robustness of the metasurface against the native oxide layer. p. 8
Where the paper says it
7(a) shows that increasing the bar width a1 results in a redshift of the resonance wavelengths λ2, λ3, and λ4, indicating an increase in the effective lateral cavity length governing the gap-related modes. In contrast, the spectral position of the resonance wavelength λ1 remains nearly unchanged with the variations in the bar width a1, the bar length a2, and the separation distance d1, as shown in Fig.
Conclusion
A multiband GSP-based metasurface incorporating a bar–disc hybrid resonator has been demonstrated to support four distinct resonances across the near-infrared and telecommunication bands. These resonances arise from the controlled interplay between GSP and LSP modes, enabling multiband operation within a single compact meta-atom. p. 4 These resonances arise from the interplay between LSP and GSP modes
supported by the hybrid resonator. The novelty of the present work lies in the hybrid integration of GSP and LSP modes
within a compact meta-atom, enabling four distinct resonances spanning the near-infrared
and telecommunication bands. The dependence of the resonant behavior on structural parameters and polarization is
systematically investigated. The proposed multiband LSP–GSP metasurface provides a compact platform for multifunctional applications requiring extended frequency coverage.Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI systems can perform broadband nonlinear optical response control by utilizing multiband metasurfaces that support multiple resonances across near-infrared and telecommunication bands. This capability stems from the
controlled interplay between GSP and LSP modes, enabling multiband operation within a single compact meta-atom.
-
The improved system can achieve enhanced nonlinear light processing, specifically second harmonic generation (SHG), at resonant wavelengths with high efficiency. This is achieved because the structure exhibits
enhanced SHG at multiple resonances, enabled by strong field localization within the metal-dielectric-metal cavity.
-
The AI system can be designed for polarization-dependent manipulation of electromagnetic fields across extended frequency ranges. This is possible because
the resonance peaks exhibit pronounced sensitivity to the polarization state,
allowing for tunable operation as the incident electric field angle changes.
Abstract
A multiband hybrid metasurface supporting multiple gap-surface plasmon (GSP) and localized surface plasmon (LSP) modes is presented. The structure adopts a metal-dielectric-metal configuration consisting of an aluminum bottom layer, a silicon dioxide spacer, and a bar-disc hybrid resonator patterned in the top aluminum layer. Optimized geometrical parameters yield four distinct resonances across the near-infrared and telecommunication bands, arising from the interplay between GSP modes and LSP excitations. The reflectance spectra are systematically analyzed as functions of geometric parameters and polarization, demonstrating tunable multiband operation. Experimental measurements of the fabricated metasurface show good agreement with numerical predictions. Furthermore, the second-harmonic generation (SHG) response is numerically investigated, revealing enhanced SH emission at the resonance wavelengths due to strong electromagnetic field confinement within the metal-dielectric-metal cavity. The proposed metasurface provides a compact platform for multiband and multifunctional nanophotonic applications.
Related papers
- Raman optical activity and helicity-dependent phonon splitting in chiral CoSi
- Stability and optical quality of "windmill"-formed 8CB liquid crystal films for replenishable plasma mirrors
- Experimental Scaling of Diffraction Efficiency in Laser-Induced Plasma Gratings
- Photonic Exceptional Topological Bound States in the Continuum
- SHAPE: a sparse Hamiltonian approach for prescribing eigenstates in metamaterials
- All-photonic millimeter-wave and terahertz signal core at room and cryogenic temperatures