Controlling photothermal forces and backaction in nano-optomechanical resonators through strain engineering

arXiv:2512.21197 · physics.optics, cond-mat.mes-hall, quant-ph · Submitted 2025-12-24 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Controlling photothermal forces and backaction in nano-optomechanical resonators through strain engineering".

Title and authors: Kai: So we're starting with 'Controlling photothermal forces and backaction in nano-optomechanical resonators through strain engineering'. The paper is led by Menno H. Jansen, Cauˆe M. Kersul, and Ewold Verhagen >

Mira: And they are focusing on how to use strain engineering to control the photothermal forces in these tiny mechanical systems >

Lev: I wonder if this deterministic control translates well to real hardware. When you're building a device, you need that control to be robust against manufacturing imperfections >

Kai: That's what they are testing. They show how controlling the overlap of temperature and modal strain profiles allows them to drastically change the integral in Equation two > <ref:2512.21197#pg1,the overlap of temperature and modal strain profiles>

Mira: And they focus on how this relates to the thermoelastic coupling Lambda theta k, which ultimately controls Gpt omega, that’s their main lever for manipulating the photothermal force >

Lev: So it's not just about measuring a force; it's about designing a structure so the coupling term changes its character from purely dissipative to something else >

Kai: It’s more than just tweaking parameters; they show how breaking symmetry in the structural design can lead to large changes in the backaction >

The paper's summary: Mira: The core of the paper is that in an optomechanical device, there are multiple ways for position fluctuations to create a force acting back on the resonator, and they focus on separating these into optomechanical and photothermal components >

Kai: They introduce the photothermal force term Gpt omega which is related to the effective response Gx by defining Gpt omega asomega zero kappa abs Pk over lambda theta k R theta k chi theta k omega >

Lev: That definition, especially how they define that effective response, is where I need to see careful assumptions. They are assuming a certain form for the thermal strain and optical heating relationship >

Kai: They show that this effective response can be used to define a single-photon photothermal force Gpt omega which makes it easier to compare directly with the optomechanical force Gx >

Mira: The key finding is that by controlling the overlap of the fields Sx r and deltaTk r omega, they can drastically change how much you manipulate this photothermal force >

Lev: So they are showing a mechanism where geometric design dictates whether you enhance or suppress the backaction effect entirely, which is significant for system stability >

Kai: They demonstrate this by showing that both fields can have roughly orthogonal symmetries in real devices, and a small breaking of symmetry through structural design causes large changes in the backaction >

The paper's improvements: Lev: When you look at how they improve this, it seems to be focusing on the experimental verification of this control mechanism rather than just the theoretical derivation >

Mira: They do show that by changing the asymmetry A of a tether in their nanobeam zipper cavity, they can control the sign of the linewidth variation >

Kai: And they specifically plot how normalized beta gamma dynamic as a function of A, and it clearly shows that you can control both the sign and magnitude of this variation just by tuning that tether asymmetry >

Lev: That’s pretty concrete. They aren't just saying "we can do it"; they are showing the scaling with A for even and odd optical modes, which gives real data on how sensitive it is to geometry >

Kai: The implication here is that if we want to suppress linewidth variation, we can design a structure where the asymmetry A leads to a specific sign of the force >

Mira: And because they compare even and odd modes, they show that changing the sign of g zero changes the sign of the effect while keeping its magnitude roughly the same >

Conclusion: Kai: So putting it all together, controlling photothermal forces and backaction in nano-optomechanical resonators through strain engineering means we can use nanoscale structural design to deterministically minimize or maximize backaction-induced linewidth variations >

Mira: This capability lets us engineer the combined photothermal and radiation pressure forces, which could allow for deterministic minimization of linewidth variation or maximization for cooling and amplification at specific laser detuning >

Lev: I think what this means practically is that we can explore chaos in selfoscillating systems at lower input powers because we can maximize the photothermal forces alongside radiation pressure >

Kai: And it also opens up exploring macroscopic quantum mechanics with more massive mechanical resonators, which are usually deeply sidebandunresolved >

Mira: The authors also note some limitations. They mentioned that their model was used to guide the structures at thirty Kelvin, and there's a discrepancy because of ballistic effects related to surface properties between the inner and outer walls of the nanobeams >

Lev: That means they are still operating in a semi-ballistic regime, but those ballistic effects aren't completely negligible compared to their simulations >

Kai: So while this is a strong demonstration of control, we have to account for those surface property differences when scaling up from their lab results to real devices >

Mira: That’s the point. This paper on controlling photothermal forces and backaction in nano-optomechanical resonators through strain engineering shows us a clear pathway for deterministic control over these complex forces by simply designing the geometry of the device >

Menno H. Jansen, Caué M. Kersul, Ewold Verhagen

Center for Nanophotonics, AMOLF · Centro de Tecnologia da Informaçao Renato Archer

physics.optics, cond-mat.mes-hall, quant-ph

Submitted: 2025-12-24

Updated: 2025-12-24

Importance score: 84/100

The gist: In micro- and nanoscale optomechanical systems, radiation pressure interactions are often complemented or impeded by photothermal forces arising from thermal strain induced by optical heating We show…

Key concepts

Photothermal Force (Fpt)
A force arising from thermal strain caused by optical heating within the system. It is calculated using an effective response factor (Gpt) derived from temperature and modal strain profiles, allowing it to be compared directly with the standard radiation pressure force.
Symmetry Breaking
The ability to break symmetry in a device's structure, such as by changing tether geometry. This structural change causes the overlap between optical fields and thermal strain profiles to change their relative signs, which is the dominant mechanism for controlling the photothermal force sign.
Tether Asymmetry (A)
A specific nanoscale geometric parameter of the supporting tethers in the nanobeam zipper cavity. Varying this asymmetry allows researchers to tune the sign and magnitude of linewidth variation by controlling how structural design affects the thermoelastic coupling.

Terminology

Summary

In micro- and nanoscale optomechanical systems, radiation pressure interactions are often complemented or impeded by photothermal forces arising from thermal strain induced by optical heating We show that the sign and magnitude of the photothermal force can be engineered through deterministic nanoscale structural design, by considering the overlap of temperature and modal strain profiles This capability is demonstrated experimentally in a specific system: a nanobeam zipper cavity by changing the geometry of its supporting tethers A single design parameter, corresponding to a nanoscale geometry change, controls the magnitude of the photothermal backaction and even its sign These insights will allow engineering the combined photothermal and radiation pressure forces in nano-optomechanical systems

Theoretical Framework of Forces

The overall optomechanical backaction force is written as Fom(ω) = ħG/2xΨ(ω, ∆)δx(ω)nph The photothermal force can be written as Fpt(ω) = ħGxGpt(ω)Ψ(ω, ∆)δx(ω)nph The photothermal equivalent to Gx is defined as Gpt(ω) = ω0κabs Pk / Λθk Rθkχθk(ω) This effective response can be used to define the equivalent single-photon photothermal force ħGpt(ω) that can be more straightforwardly compared to the optomechanical single photon force ħGx The mechanical frequency variation is given by δomega = 1/2meffomega Re ΣRP(omega, ∆0) + Σθ(omega, ∆0)

Engineering Control via Symmetry Breaking

The sign of Fom(ω) is uniquely given by Ψ(ω, ∆), as it further depends only on G2x, which is always positive This is not the case for Fpt(ω), with its overall sign also affected by the relative sign between Gpt(ω) and Gx The ability to control the thermoelastic coupling Λθk through the geometry of the device is precisely what we explore here to achieve deterministic control over the photothermal force By controlling the overlap of the fields S x(r) and δTk(r, ω), both fields can have approximately orthogonal symmetries in realistic devices A small breaking of symmetry through structural design can then lead to large changes of the backaction This symmetry breaking mechanism is the dominant factor in the thermoelastic coupling

Experimental Verification and Tuning

By changing the asymmetry A of the tether, we can control the sign of the linewidth variation Looking at the change in normalized βΓ,dyn as a function of A, we see that the sign and magnitude of the variation in linewidth can be controlled by changing the tether asymmetry Comparing the results for even and odd optical modes, we see that the sign of the effect changes due to the change in the sign of g0, while the magnitude of the effect remains the same The normalized value is proportional to the thermo-elastic force Fpt with its sign given by the relative sign between Gpt and g0

Implications for Optomechanical Applications

The ability to engineer photothermal forces enables a new degree of freedom in cavity optomechanics, allowing either suppression or enhancement of photothermal backaction It could be used to suppress linewidth variation, thereby avoiding unwanted instabilities Moreover, photothermal backaction could be maximized together with radiation pressure in optomechanical devices This could allow the study of chaos in selfoscillating systems at lower input powers This enhancement of photothermal forces could also open up the exploration of macroscopic quantum mechanics with more massive mechanical resonators

Model Limitations and Real-World Effects

The results of our model were used as a guide to design the structures at 30 K Ballistic effects related to differences in the surface properties between the inner and outer walls of the nanobeams could be one of the reasons behind the discrepancy between simulations and experiment The typical phonon wavelength is around 9 nm, which is of the same order of magnitude as the expected lateral surface roughness in silicon devices, which is around 5 nm We are still in the semi-ballistic regime, but ballistic effects are not completely negligible The results show that the A = 0 device is expected to have a very small linewidth variation, while this occurs in our experiments for slightly larger asymmetry A ≈ 0.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Deterministic control over photothermal force sign and magnitude in nano-optomechanical systems: The improved system can engineer the sign and magnitude of the photothermal force by engineering the geometry of a nanoscale optomechanical device, allowing for deterministic minimization or maximization of backaction-induced linewidth variations.

  2. Enhanced cooling and amplification performance: The ability to control the photothermal force allows for "the combined photothermal and radiation pressure forces in nano-optomechanical systems, such that backaction-induced linewidth variations are deterministically minimized if needed, or maximized for applications that require cooling or amplification at specific laser detuning."

  3. Exploration of nonlinear regimes and macroscopic quantum mechanics: By maximizing photothermal forces alongside radiation pressure, the system can open up the exploration of macroscopic quantum mechanics with more massive mechanical resonators, which are usually deeply sidebandunresolved and allow for reaching stronger nonlinear regimes.

  4. Characterization of thermal response as a proxy for absorption rate: The system can use the slope beta Omega stat as a proxy for kappa abs by relating it to the linear proportionality between static frequency variation and temperature changes, enabling estimation of optical absorption rates in devices where direct temperature measurement is difficult.

  5. Sensitivity analysis via tether asymmetry: The system can quantify the control achieved by geometric design by plotting the normalized β Γ,dyn as a function of tether asymmetry A, demonstrating that the sign and magnitude of the variation in linewidth can be controlled by changing the tether asymmetry.

Related papers