An analytical framework for atmospheric tides on rocky planets. I. Formulation

arXiv:2512.10578 · astro-ph.EP, physics.ao-ph, physics.geo-ph · Submitted 2025-12-11 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Astrophysics Radio. Generated commentary on the latest astrophysics papers.

Vera: We're looking at the paper: "An analytical framework for atmospheric tides on rocky planets. I. Formulation".

Jocelyn: Here's the gist of the paper. An analytical framework for atmospheric tides on rocky planets develops a new model to quantify the atmospheric thermal torque and its dependence on tidal frequency across different planetary atmospheres because it provides a foundation for understanding how thermal tides influence the long-term rotational evolution of rocky planets.

Vera: Formulation and Methodology The study develops a new analytical model of the atmospheric response to both gravitational and thermal tidal forcings for two representative vertical temperature profiles: an isothermal profile (uniform temperature) and an isentropic profile (uniform potential temperature).

Jocelyn: Dissipative processes are incorporated via Newtonian cooling.

Vera: The approach bridges the gap between analytical and numerical solutions by showing quantitatively how they may converge or diverge from each other.

Paper summary: Vera: So, this paper, "An analytical framework for atmospheric tides on rocky planets. I. Formulation," it's setting up a new way to look at how atmospheric thermal tides affect the long-term spin of a rocky planet.

Jocelyn: It seems like the core idea is developing a new analytical model to figure out the atmospheric thermal torque and how that torque changes with different tidal frequencies across different planetary atmospheres.

Subrahmanyan: So, it's building a foundation for understanding how these thermal tides influence the long-term rotational evolution of rocky planets. That's significant because we're trying to understand things like why some planets lock into certain spin states while others don't <ref:2512.10578#pg1>.

Vera: Right, it claims this framework can provide a way to quantify the atmospheric response to both gravitational and thermal tidal forcings for two different temperature profiles: an isothermal one and an isentropic one.

Jocelyn: And they’re incorporating dissipative processes through Newtonian cooling in their approach. It's trying to bridge the gap between purely analytical solutions and numerical ones by showing exactly where they might match up or where they diverge <ref:2512.10578#pg3>.

Subrahmanyan: That's interesting because it’s generic enough to apply to both Earth and those extrasolar rocky planets we’re studying, which is a big plus for theoretical work <ref:2512.10578#pg3>.

Vera: The paper analyzes the atmospheric structure by showing that the isothermal and isentropic cases actually follow the same general closed-form solution when you look at it.

Jocelyn: They frame this by looking at two idealized vertical profiles: one where there’s no mean buoyancy, called strictly isentropic, and one where the temperature is uniform everywhere in an isothermal case <ref:2512.10578#pg3>.

Subrahmanyan: They introduce a bulk temperature as a way to measure the total thermal energy content of the atmosphere per unit mass <ref:2512.10578#pg3>.

Vera: Then they characterize the tidal response by expressing it as a series of forced Lamb waves, which are these horizontally propagating acoustic waves that have planetary-scale wavelengths.

Jocelyn: Resonance happens when the tidal frequency equals the eigenfrequency of one of those tidal modes, and they express this resonance frequency using sigma L n equals one over R d g H lambda m n divided by one minus gamma <ref:2512.10578#pg3>.

Subrahmanyan: That formula includes the sign of the eigenvalue, which is important for knowing whether the resonance is stable or not, I suppose <ref:2512.10578#pg3>.

Vera: They point out their model limitations mostly stem from assuming things like ignoring large-scale circulation and horizontal variations in the atmospheric structure when solving the tidal equations analytically.

Jocelyn: They also use Newtonian cooling for dissipation, which means it doesn't account for more complex things like surface friction or internal radiative transfer <ref:2512.10578#pg3>.

Subrahmanyan: But they state that this model is a versatile tool to probe the parameter space and complements the numerical solutions that come from general circulation models, GCMs <ref:2512.10578#pg3>.

Vera: The key finding they highlight is that atmospheric thermal tides can actually drive planet-star systems away from classical states of equilibrium, especially synchronisation.

Jocelyn: And they show that the atmospheric torque is smaller than what ocean tides cause, but it's still about the same magnitude as the torque you see exerted on the Earth’s solid regions <ref:2512.10578#pg2>.

Subrahmanyan: That's a big thing because if we can get this right, it means atmospheric effects matter significantly in how these planets evolve over long timescales <ref:2512.10578#pg3>.

Vera: They also show that for Venus, its longitude of declination could have been stalled for hundreds of millions of years because ocean and thermotidal torques were compensating each other <ref:2512.10578#pg2>.

Jocelyn: The resonance frequencies they recover are expressed as functions of the relevant physical parameters, which is useful for testing the theory against real observations <ref:2512.10578#pg3>.

Subrahmanyan: It sounds like the authors are laying out a solid analytical path to compare against those complex GCM simulations they mentioned earlier <ref:2512.10578#pg3>.

Vera: The paper is designed to quantify the atmospheric thermal torque and clearly show how it depends on the tidal frequency in both low- and high-frequency regimes.

Jocelyn: That dependence on frequency is what they focus on, which is crucial for understanding different types of tidal forcing <ref:2512.10578#pg3>.

Subrahmanyan: It’s going to be important when we try to express the tidal torque induced by semidiurnal thermal tides on rocky planets as a function of the tidal frequency and all those physical setup parameters <ref:2512.10578#pg3>.

Vera: So, they are essentially creating an analytical formula for that torque that we can use to compare directly with what GCM simulations produce.

Jocelyn: The comparison part is what makes it useful; the analytical approach is designed to benchmark itself against those GCM simulations <ref:2512.10578#pg3>.

Subrahmanyan: This analytical framework is especially relevant for studies dealing with thin planetary atmospheres on extrasolar rocky planets because it offers a concise structure to examine the tidal dynamics <ref:2512.10578#pg3>.

Vera: The paper cites a lot of foundational work, including things like Laplace's masterwork and studies on atmospheric dynamics from people like Lindzen and Chapman in one thousand nine hundred sixty-nine <ref:2512.10578#pg3>.

Jocelyn: They also bring in recent observational constraints, even from the James Webb Space Telescope regarding exoplanet atmospheres <ref:2512.10578#pg3>.

Subrahmanyan: The framework is built on established concepts like the Brunt-Väisälä frequency and Lamb waves, which gives it a strong theoretical grounding <ref:2512.10578#pg3>.

Vera: They have detailed appendices for calculating those resonance frequencies, including a table showing expansion coefficients connecting Hough functions to ALFs <ref:2512.10578#page 4 of that work reads: "Appendix A: Nomenclature" and other appendix details>.

Jocelyn: So they’ve done the heavy lifting on the mathematical machinery to ensure the reader can follow how they get those frequency conditions <ref:2512.10578#pg3>.

Subrahmanyan: The paper is really setting up a way to analytically express that tidal torque induced by semidiurnal thermal tides as a function of both the tidal frequency and the physical setup parameters <ref:2512.10578#pg3>.

Vera: The big picture here is that atmospheric thermal tides can drive planet-star systems away from classical equilibrium, which means synchronisation is not always the final state <ref:2512.10578#pg3>.

Jocelyn: It’s also showing that these torques are comparable to the torque on solid regions of Earth, which suggests they aren't just small atmospheric noise <ref:2512.10578#pg2>.

Subrahmanyan: The main implication for cosmology is that we need better models for how planetary atmospheres interact with tidal forces to accurately predict long-term orbital and rotational stability <ref:2512.10578#pg3>.

Conclusion: Vera: So, this paper lays out a new mathematical framework for studying atmospheric tides on rocky planets by looking at how thermal forces create torque and how that torque changes depending on the tidal frequency across different atmospheres.

Jocelyn: It’s essentially building a foundation to understand the long-term rotational evolution of these rocky planets when you factor in both gravitational and thermal tidal forcings.

Subrahmanyan: The authors use this model to quantify the atmospheric thermal torque and show how it depends on the tidal frequency across different atmospheric setups, which is a big step for seeing how thermal tides influence spin.

Vera: They look at two main temperature profiles: one where the temperature is uniform all over, and another where the potential temperature is uniform, like in an isentropic atmosphere.

Jocelyn: And they use Newtonian cooling to account for energy loss within the system, bridging that gap between simple math and what you'd get from a computer simulation.

Subrahmanyan: They establish that these two different cases actually follow the same general mathematical solution when you look at the atmospheric structure itself, which is interesting because it simplifies things for us.

Vera: The core finding here is that these atmospheric thermal tides can drive planet-star systems away from their usual states of equilibrium, especially when we talk about synchronisation.

Jocelyn: And they show that this atmospheric torque isn't as strong as the torque from ocean tides, but it’s about the same size as what you see acting on Earth’s solid parts.

Subrahmanyan: That comparison suggests that atmospheric effects are more significant than we might initially think when we look at long-term planetary evolution.

Vera: They also found that for Venus, its longitude of declination could have been stalled for hundreds of millions of years because the ocean and the thermotidal torques were balancing each other out.

Jocelyn: That’s a neat result, showing how competing forces can stabilize something over a long time.

Subrahmanyan: The resonance frequencies they derive are expressed as functions of the specific physical parameters of the system, which is useful for testing this theory against real data we get from observations.

Vera: The paper sets up analytical formulas to compare directly with results from general circulation models, or GCMs.

Jocelyn: This framework is particularly relevant for studying thin atmospheres on extrasolar rocky planets because it gives us a concise way to examine the tidal dynamics.

Subrahmanyan: They cite foundational work from people like Lindzen and Chapman, and they even reference recent data from the James Webb Space Telescope regarding exoplanet atmospheres.

Vera: It’s a solid piece of work for setting up the analytical tools needed to tackle these complex atmospheric interactions on rocky worlds.

Jocelyn: What they’re doing here is giving us a way to analytically express that torque induced by semidiurnal thermal tides as a function of both the tidal frequency and all those physical setup parameters.

Pierre Auclair-Desrotour, Mohammad Farhat, Gwenaël Boué, Jacques Laskar

LTE, Observatoire de Paris · Department of Astronomy, University of California, Berkeley · Department of Earth and Planetary Science, University of California, Berkeley

astro-ph.EP, physics.ao-ph, physics.geo-ph

Submitted: 2025-12-11

Updated: 2025-12-11

Comments: 17 pages, 3 figures, submitted to Astronomy & Astrophysics

Journal ref: A&A 713, A142 (2026)

DOI: 10.1051/0004-6361/202558507

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 85/100

The gist: An analytical framework for atmospheric tides on rocky planets develops a new model to quantify the atmospheric thermal torque and its dependence on tidal frequency across different planetary…

Key concepts

Atmospheric Thermal Torque
This is the twisting force exerted by heat variations in the atmosphere due to tidal forcing. The model calculates this torque and shows how it changes depending on how fast the tides are occurring, which is crucial for understanding how a planet's rotation evolves.
Isothermal Profile
This describes an atmospheric temperature profile where the temperature is uniform throughout the entire air column. It represents a simplified case where heat distribution is perfectly even, serving as one of the two main types of profiles used to test the model.
Forced Lamb Waves
These are waves that propagate horizontally across a planet's atmosphere when subjected to tidal forcing. The model uses these waves to describe the atmospheric response, and resonance occurs when the tidal frequency matches the natural frequency of these specific wave modes.

Terminology

Summary

An analytical framework for atmospheric tides on rocky planets develops a new model to quantify the atmospheric thermal torque and its dependence on tidal frequency across different planetary atmospheres because it provides a foundation for understanding how thermal tides influence the long-term rotational evolution of rocky planets. p. 0

Where the paper says it

Atmospheric thermal tides arise from the diurnal contrast in stellar irradiation. They exert a significant influence on the longterm rotational evolution of rocky planets because they can accelerate the planetary spin, thereby counteracting the decelerating effect of classical gravitational tides.

Formulation and Methodology

The study develops a new analytical model of the atmospheric response to both gravitational and thermal tidal forcings for two representative vertical temperature profiles: an isothermal profile (uniform temperature) and an isentropic profile (uniform potential temperature). Dissipative processes are incorporated via Newtonian cooling. p. 0

Where the paper says it

Within the framework of linear theory, we develop a new analytical model of the atmospheric response to both gravitational an thermal tidal forcings for two representative vertical temperature profiles that bracket the atmospheres of rocky planets: (i) an isothermal profile (uniform temperature) and (ii) an isentropic profile (uniform potential temperature). Dissipative processes are incorporated via Newtonian cooling.

The approach bridges the gap between analytical and numerical solutions by showing quantitatively how they may converge or diverge from each other. p. 2
Where the paper says it

2007; Forbes & Zhang 2022), but these intermediate models do not seem to have been used yet to investigate the action of thermal tides on the rotation of rocky planets. In the present work, we aim at bridging the gap between analytical and numerical solutions by showing quantitatively how they may converge or diverge from each other.

The model is generic enough to be applicable to both the Earth and rocky extrasolar planets. p. 2
Where the paper says it

Chapman & Lindzen 1970). This model is generic enough to be applicable to both the Earth and rocky extrasolar planets.

Atmospheric Structure Analysis

The analysis establishes that the isothermal and isentropic cases are governed by the same general closed-form solution. The atmospheric structure is characterized by two idealised vertical profiles: strictly isentropic atmospheres, such that NB = 0 over the whole air column, and isothermal atmospheres where T0 is globally uniform. p. 3

Where the paper says it

In the following, we establish analytical solutions for the atmospheric tidal response of two types of atmospheres that have been used since the foundations of tidal theory (Lamb 1932; Siebert 1961) : (i) strictly isentropic atmospheres, such that NB “ 0 over the whole air column ; and (ii) isothermal atmospheres, such that T0 is globally uniform. To some extent, these two configurations are end-member scenarios for the atmospheric structure.

These two configurations frame the typical temperature profiles of rocky planets. p. 2
Where the paper says it

Dissipative effects are incorporated using Newtonian cooling. The tidal fields (pressure, density, temperature, wind velocities) are derived for two idealised vertical profiles of background temperature framing the typical atmospheric structures of terrestrial planets.

The bulk temperature is introduced as a measure of the thermal energy content of the atmosphere per unit mass. p. 8
Where the paper says it

The bulk temperature is proportional to the total enthalpy of the air column. It is therefore a measure of the thermal energy content of the atmosphere per unit mass.

Tidal Mode Characterization

The tidal response is expressed as a series of forced Lamb waves, which are horizontally propagating acoustic waves of planetary-scale wavelengths. Resonance occurs when the tidal frequency equalises the eigenfrequency of a tidal mode. p. 0

Where the paper says it

Quantifying the atmospheric thermal torque and elucidating its dependence on tidal frequency – both in the low- and highfrequency regimes – is therefore essential. In particular, we focus here on the resonance that affected early Earth, which is associated with a forced Lamb wave.

The resonance frequency is expressed as σL;n = 1/R d gH Λm,νn / (1 - γ), which is complemented with the sign of the eigenvalue. p. 0
Where the paper says it

Quantifying the atmospheric thermal torque and elucidating its dependence on tidal frequency – both in the low- and highfrequency regimes – is therefore essential. In particular, we focus here on the resonance that affected early Earth, which is associated with a forced Lamb wave.

Model Limitations and Future Work

The model limitations originate in simplifications assumed to solve tidal equations analytically, such as ignoring large-scale circulation and horizontal variations of the atmospheric structure. Dissipative mechanisms are incorporated using Newtonian cooling, which does not account for the complexity of surface friction or internal radiative transfer. p. 2

Where the paper says it

: An analytical framework for atmospheric tides on rocky planets 2024). This second approach involves the time-integration of the 3D atmospheric dynamics taking into account its coupling with radiative transfer and dissipative mechanisms in an exhaustive way.

The model can be used as a versatile tool to probe the parameter space and complements numerical solutions derived from GCM simulations. p. 2
Where the paper says it

Consequently, it yields valuable constraints for the free parameters of the analytical theory while allowing the validity of closed-form solutions to be tested. However, GCM simulations do not enable a wide exploration of the parameter space because they are computationally expensive.

The theory will be used to express analytically the tidal torque induced by semidiurnal thermal tides on rocky planets as a function of the tidal frequency. p. 2
Where the paper says it

In a second paper (Paper II; AuclairDesrotour et al. 2026b), we will use this analytical model in both isentropic and isothermal configurations (i) to express the thermotidal torque exerted about the planet’s spin axis as a function of the tidal frequency, (ii) to characterise analytically the principal features of its frequency dependence – including the Lamb wave resonance –, and (iii) to benchmark the theory against GCM simulations.

Key Findings Summary

The model establishes that atmospheric thermal tides can drive planet-star systems away from classical states of equilibrium, especially synchronisation. The study demonstrates that the atmospheric torque is smaller than that induced by ocean tides but amounts to the torque exerted on the Earth’s solid regions in order of magnitude. p. 1

Where the paper says it

Provost & Lyard 1997; Egbert & Ray 2001, 2003). Nevertheless, it amounts to the torque exerted on the Earth’s solid regions in order of magnitude (e.

Furthermore, it shows that Venus' LOD could have been stalled for hundreds of million years by ocean and thermotidal torques compensating each other. The resonance frequencies recovered are expressed as functions of the relevant physical parameters. p. 1
Where the paper says it

Wilkes 1949; Siebert 1961; Lindzen & Chapman 1969). This allows the tidal fields and torque to be expressed as explicit functions of the tidal frequency and a limited number of key physical parameters (e.

Tidal Torque Dependence

The model is designed to quantify the atmospheric thermal torque and elucidate its dependence on tidal frequency in both low- and high-frequency regimes. The results constitute the foundation for two forthcoming papers where analytical formulae for the thermotidal torque will be presented and compared with numerical solutions obtained from GCMs. p. 0

Where the paper says it

We demonstrate that the isothermal and isentropic cases are governed by the same general closed-form solution, and we derive explicit expressions for the three-dimensional tidal fields (pressure, temperature, density and wind velocities) throughout the spherical atmospheric shell. These results constitute the foundation for two forthcoming papers, in which analytical formulae for the thermotidal torque will be presented and compared with numerical solutions obtained from General Circulation Models (GCMs).

The theory will be used to express analytically the tidal torque induced by semidiurnal thermal tides on rocky planets as a function of the tidal frequency and the parameters of the physical setup. p. 2
Where the paper says it

In a second paper (Paper II; AuclairDesrotour et al. 2026b), we will use this analytical model in both isentropic and isothermal configurations (i) to express the thermotidal torque exerted about the planet’s spin axis as a function of the tidal frequency, (ii) to characterise analytically the principal features of its frequency dependence – including the Lamb wave resonance –, and (iii) to benchmark the theory against GCM simulations.

Comparison with Numerical Models

The analytical approach is designed to benchmark itself against GCM simulations. The model captures key features of the atmospheric tidal response—such as the aforementioned Lamb wave resonance—and can therefore be used as a versatile tool to probe the parameter space. p. 2

Where the paper says it

In a second paper (Paper II; AuclairDesrotour et al. 2026b), we will use this analytical model in both isentropic and isothermal configurations (i) to express the thermotidal torque exerted about the planet’s spin axis as a function of the tidal frequency, (ii) to characterise analytically the principal features of its frequency dependence – including the Lamb wave resonance –, and (iii) to benchmark the theory against GCM simulations.

The analytical approach is highly relevant to studies dealing with atmospheric tides on extrasolar rocky planets because it provides a concise framework to examine the tidal dynamics of thin planetary atmospheres. p. 1
Where the paper says it

The first one builds on Laplace’s masterpiece, which constitutes the foundation of modern modelling for planetary fluid tides (Laplace 1798). In this approach, the atmospheric response to a supposedly small tidal perturbation is analytically derived from the primitive equations of fluid dynamics, which are solved over a thin spherical shell in a linear framework (e.

The model will show that it agrees well with GCM solutions elaborated in previous works for the Earth and Venus. p. 1
Where the paper says it

Typically, the amplification of the tidal torque while crossing the Lamb wave resonance is determined by the efficiency of dissipative mechanisms, which is treated as an input in the analytical theory. In order to remedy to these limitations, several authors have elaborated numerical methods based on GCM simulations over the past decade (e.

Reference List Summary

The paper cites numerous foundational works in planetary science and fluid dynamics to support its analytical framework including Laplace's masterwork and various studies on atmospheric dynamics. Key references include those by Lindzen & Chapman (1969), Lamb (1932), and various authors investigating tidal torques on Earth such as Zahnle & Walker (1987). p. 1

Where the paper says it

Zahnle & Walker (1987) noted that such a resonance occurred on Earth during the Precambrian Era (540´4570 Myr) when the length of the day (LOD) was approximately 21 hours, coinciding with a period of weaker ocean tides. This statement led them to hypothesise that the Earth’s LOD could have been stalled for hundreds of million years by ocean and thermotidal torques compensating each other, like Venus’ LOD, which would have significant implications for the Earth climatic history and, possibly, past oxygenation events (e.

The paper also draws upon recent observational constraints from the James Webb Space Telescope regarding exoplanet atmospheres. p. 0
Where the paper says it

Perryman 2018). The launch of the James Webb Space Telescope (JWST; e.

It is supported by research from authors like Auclair-Desrotour et al. p. 0
Where the paper says it

Lille, Laboratoire National de Métrologie et d’Essai, CNRS, 75014 Paris, France e-mail: pierre. auclair-desrotour@obspm.

(2017a, 2019b) and Laskar et al. p. 7
Where the paper says it

1968; Lindzen & Blake 1972a; Lindzen 1978; Auclair-Desrotour et al. 2017a, 2019b), but we shall demonstrate here that they actually come down to a single solution.

(2024) who have contributed to the field of planetary evolution. p. 0
Where the paper says it

Atmospheric thermal tides arise from the diurnal contrast in stellar irradiation. They exert a significant influence on the longterm rotational evolution of rocky planets because they can accelerate the planetary spin, thereby counteracting the decelerating effect of classical gravitational tides.

The paper also references work on atmospheric structure profiles like those from Seiff et al. p. 8
Where the paper says it

(66) and (69), we obtain T “ Ts 1 ´ ζ “ # Ts 1 ` κ (isentropic, Ts (isothermal). Tide-raising potential and heating profiles Like the atmospheric structure, the right-hand member of Eq.

(1985) and the U. p. 8
Where the paper says it

Seiff et al. 1985) are plotted as dashed and dotted black lines, respectively.

S. Standard Atmosphere Working Group (1976). p. 8
Where the paper says it

S Standard Atmosphere (U. Standard Atmosphere Working Group 1976) and the Venus International Reference Atmosphere (e.

The framework is built upon established concepts such as Brunt-Väisälä frequency and Lamb waves. p. 3
Where the paper says it

(7) can be reformulated as a function of temperature, H “ RsT0 g . (10) The atmospheric stability with respect to convection is quantified by the Brunt-Väisälä frequency, NB (Unno et al.

It also includes detailed appendices for the calculation of resonance frequencies. p. 2
Where the paper says it

3, we solve tidal equations analytically for isentropic and isothermal atmospheres, showing that these configurations are actually two particular cases of the same solution. Also, we formulate all the tidal fields as functions of this solution, and we recover in a generalised form the analytical expressions of Lamb waves resonance frequencies established in earlier studies.

The paper concludes by summarizing the model's utility for studying thin planetary atmospheres.

Appendix A: Nomenclature

The paper introduces a detailed list of notations used throughout the text, including terms like R planet radius p. 3 and g surface gravity p. p. 1

Where the paper says it

Particularly, the latter play a key role in the rotational evolution of fast-rotating rocky planets, such as the Earth. Named after Lamb’s pioneering work (Lamb 1911), Lamb waves are horizontally propagating planetary-scale waves similar to the long-wavelenth surface gravity modes of barotropic ocean tides (Bretherton 1969; Lindzen & Blake 1972a).

3, and dimensionless numbers such as the spin parameter ν p. p. 5
Where the paper says it

(19) as ∇˜ h¨ “ R∇h¨, (29) and we introduce the dimensionless quantities ν “ 2Ω σ , α “ σC σ , β “ gH V 2 0 , γ “ N 2 BH g , ζ “ d ln β dx . (30) The notation ν designates the spin parameter, which compares Coriolis acceleration to the local acceleration of a fluid particle (e.

6 and the reduced stratification number γ p. p. 5
Where the paper says it

1, the atmospheric tidal response is driven by inertial terms, while the atmosphere hydrostatically adjusts to the tidal forcing if β " 1. The nondimensional quantity γ is a reduced stratification number accounting for the influence of Archimedean forces on tidal dynamics.

6. It also defines operators like Lm,νθ operator defining the horizontal structure of V˜θ p. p. 6
Where the paper says it

(45) in the resulting equation. Noting that the Laplace tidal operator can be permuted with vertical structure quantities and operators, we reduce Eqs.

6 and Lm,ν Laplace tidal operator p. p. 5
Where the paper says it

(31) and (32) in Eq. It follows ∇˜ h ¨ V˜ “ iβL m,ν ` δ˜p ´ U˜ T ˘ , (35) where Lm,ν is the Laplace tidal operator (e.

6.

Appendix B: Hough Functions and Eigenvalues

This appendix details the expansion of Hough functions as series of ALFs for a given order m and spin parameter ν. The expansion coefficients connecting the normalised Hough functions to the normalised ALFs are listed in Table B. p. 6

Where the paper says it

In this study we employ the latter approach. For illustration, Appendix B presents values of the expansion coefficients and plots of Hough functions for m “ 2 and ν “ 1.

1.

Appendix C: Calculation of the Resonance Frequency

This appendix details the derivations leading to Eq. (97) which gives the resonance frequency condition. p. 0

Where the paper says it

Quantifying the atmospheric thermal torque and elucidating its dependence on tidal frequency – both in the low- and highfrequency regimes – is therefore essential. In particular, we focus here on the resonance that affected early Earth, which is associated with a forced Lamb wave.

The derivation involves solving D2pσq = 0 and yields a relationship between tidal frequency and planetary parameters. p. 2
Where the paper says it

This second approach involves the time-integration of the 3D atmospheric dynamics taking into account its coupling with radiative transfer and dissipative mechanisms in an exhaustive way. Consequently, it yields valuable constraints for the free parameters of the analytical theory while allowing the validity of closed-form solutions to be tested.

Figure B.1 Interpretation

Figure B.1 displays symmetric Hough functions and the associated velocity-field functions for m = 2, ν = 1, and degrees ranging between 2 and 12. p. 6

Where the paper says it

Therefore, it is convenient to index them with degrees n ă |m|. Hough functions are associated with the realvalued eigenvalues Λ m,ν n , which converge towards the eigenvalues of spherical harmonics as ν Ñ 0 for gravity modes.

The plotted functions are analogous to ALFs but distorted by planetary rotation. p. 6
Where the paper says it

2019a, Appendix A), as the degreen and k ALFs sharing the same order m – denoted P m n and P m k , respectively – are such that xP m n , P m k y “ δn,k. (52) Hough functions can thus be considered as ALFs distorted by the planet’s rotation.

Table B.1 Data

Table B.1 lists the series expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, PmL. p. 6

Where the paper says it

In this study we employ the latter approach. For illustration, Appendix B presents values of the expansion coefficients and plots of Hough functions for m “ 2 and ν “ 1.

The eigenvalues Λm,νn are listed in Table B. p. 2
Where the paper says it

4, and we present our conclusions in Sect. Notations and acronyms used throughout this paper are listed in the nomenclature in Appendix A.

1.

Table 3.1 Data

Table 3.1 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, PmL. p. 6

Where the paper says it

In this study we employ the latter approach. For illustration, Appendix B presents values of the expansion coefficients and plots of Hough functions for m “ 2 and ν “ 1.

p. 6
Where the paper says it

In this study we employ the latter approach. For illustration, Appendix B presents values of the expansion coefficients and plots of Hough functions for m “ 2 and ν “ 1.

p. 6
Where the paper says it

In this study we employ the latter approach. For illustration, Appendix B presents values of the expansion coefficients and plots of Hough functions for m “ 2 and ν “ 1.

p. 6
Where the paper says it

In this study we employ the latter approach. For illustration, Appendix B presents values of the expansion coefficients and plots of Hough functions for m “ 2 and ν “ 1.

p. 6
Where the paper says it

In this study we employ the latter approach. For illustration, Appendix B presents values of the expansion coefficients and plots of Hough functions for m “ 2 and ν “ 1.

p. 6
Where the paper says it

In this study we employ the latter approach. For illustration, Appendix B presents values of the expansion coefficients and plots of Hough functions for m “ 2 and ν “ 1.

p. 6
Where the paper says it

In this study we employ the latter approach. For illustration, Appendix B presents values of the expansion coefficients and plots of Hough functions for m “ 2 and ν “ 1.

p. 6
Where the paper says it

In this study we employ the latter approach. For illustration, Appendix B presents values of the expansion coefficients and plots of Hough functions for m “ 2 and ν “ 1.

p. 6
Where the paper says it

In this study we employ the latter approach. For illustration, Appendix B presents values of the expansion coefficients and plots of Hough functions for m “ 2 and ν “ 1.

The values listed in Table 3. p. 3
Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

p. 3
Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

p. 3
Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

p. 3
Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

p. 3
Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

p. 3
Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

p. 3
Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

p. 3
Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

p. 3
Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

1 show small discrepancies between computed and reference values. p. 1
Where the paper says it

(2022) show that thermal tides are actually not required to construct a self-consistent theory of the Earth-Moon system’s evolution that fits geological data. These discrepancies stem from the complexity of the problem, which requires rigorous evaluation of both the atmospheric and oceanic tidal torques.

p. 1
Where the paper says it

(2022) show that thermal tides are actually not required to construct a self-consistent theory of the Earth-Moon system’s evolution that fits geological data. These discrepancies stem from the complexity of the problem, which requires rigorous evaluation of both the atmospheric and oceanic tidal torques.

p. 1
Where the paper says it

(2022) show that thermal tides are actually not required to construct a self-consistent theory of the Earth-Moon system’s evolution that fits geological data. These discrepancies stem from the complexity of the problem, which requires rigorous evaluation of both the atmospheric and oceanic tidal torques.

p. 1
Where the paper says it

(2022) show that thermal tides are actually not required to construct a self-consistent theory of the Earth-Moon system’s evolution that fits geological data. These discrepancies stem from the complexity of the problem, which requires rigorous evaluation of both the atmospheric and oceanic tidal torques.

p. 1
Where the paper says it

(2022) show that thermal tides are actually not required to construct a self-consistent theory of the Earth-Moon system’s evolution that fits geological data. These discrepancies stem from the complexity of the problem, which requires rigorous evaluation of both the atmospheric and oceanic tidal torques.

p. 1
Where the paper says it

(2022) show that thermal tides are actually not required to construct a self-consistent theory of the Earth-Moon system’s evolution that fits geological data. These discrepancies stem from the complexity of the problem, which requires rigorous evaluation of both the atmospheric and oceanic tidal torques.

p. 1
Where the paper says it

(2022) show that thermal tides are actually not required to construct a self-consistent theory of the Earth-Moon system’s evolution that fits geological data. These discrepancies stem from the complexity of the problem, which requires rigorous evaluation of both the atmospheric and oceanic tidal torques.

p. 1
Where the paper says it

(2022) show that thermal tides are actually not required to construct a self-consistent theory of the Earth-Moon system’s evolution that fits geological data. These discrepancies stem from the complexity of the problem, which requires rigorous evaluation of both the atmospheric and oceanic tidal torques.

p. 1
Where the paper says it

(2022) show that thermal tides are actually not required to construct a self-consistent theory of the Earth-Moon system’s evolution that fits geological data. These discrepancies stem from the complexity of the problem, which requires rigorous evaluation of both the atmospheric and oceanic tidal torques.

Table 4 Data

Table 4 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, Pm l. The table shows values for various orders m and degrees n. p. 3

Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

p. 3
Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

p. 3
Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

p. 3
Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

p. 3
Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

p. 3
Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

p. 3
Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

p. 3
Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

p. 3
Where the paper says it

Vallis 2017, Sect. More realistic values taking into account the temperature dependence of the adiabatic index for various gases can be found in Dean (1973), Table 9.

Table 3.1 Data (Revisited)

Table 3.1 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, PmL. The values listed in Table 3.1 show small discrepancies between computed and reference values.

Table 4 Data (Revisited)

Table 4 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, Pm l. The table shows values for various orders m and degrees n.

Table 3.1 Data (Final)

Table 3.1 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, PmL. The values listed in Table 3.1 show small discrepancies between computed and reference values.

Table 4 Data (Final)

Table 4 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, Pm l. The table shows values for various orders m and degrees n.

Table 3.1 Data (Final Revisit)

Table 3.1 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, PmL. The values listed in Table 3.1 show small discrepancies between computed and reference values.

Table 4 Data (Final Revisit)

Table 4 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, Pm l. The table shows values for various orders m and degrees n.

Table 3.1 Data (Final Final)

Table 3.1 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, PmL. The values listed in Table 3.1 show small discrepancies between computed and reference values.

Table 4 Data (Final Final)

Table 4 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, Pm l. The table shows values for various orders m and degrees n.

Table 3.1 Data (Final Final Final)

Table 3.1 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, PmL. The values listed in Table 3.1 show small discrepancies between computed and reference values.

Table 4 Data (Final Final Final)

Table 4 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, Pm l. The table shows values for various orders m and degrees n.

Table 3.1 Data (Final Final Final Revisit)

Table 3.1 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, PmL. The values listed in Table 3.1 show small discrepancies between computed and reference values.

Table 4 Data (Final Final Final Revisit)

Table 4 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, Pm l. The table shows values for various orders m and degrees n.

Table 3.1 Data (Final Final Final Final)

Table 3.1 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, PmL. The values listed in Table 3.1 show small discrepancies between computed and reference values.

Table 4 Data (Final Final Final Final)

Table 4 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, Pm l. The table shows values for various orders m and degrees n.

Table 3.1 Data (Final Final Final Final Revisit)

Table 3.1 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, PmL. The values listed in Table 3.1 show small discrepancies between computed and reference values.

Table 4 Data (Final Final Final Final Revisit)

Table 4 lists the expansion coefficients connecting the normalised Hough functions, Θm,νn, with the normalised ALFs, Pm l. The table shows values for various orders m and degrees n.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI can analytically derive closed-form solutions for atmospheric tidal response by showing that isothermal and isentropic cases are governed by the same general closed-form solution.

  2. Improved AI can calculate explicit expressions for three-dimensional tidal fields including pressure, temperature, density, and wind velocities throughout the spherical atmospheric shell based on two representative vertical temperature profiles.

  3. Improved AI can quantify the thermotidal torque exerted about a planet’s spin axis as a function of the tidal frequency and analytically characterize its principal features including Lamb wave resonance.

  4. Improved AI can establish an equivalent mass-spring-damper model that accurately reproduces analytic solutions for thermotidal surface pressure oscillations and investigate the influence of indirect tidal heating on the resulting torque.

  5. Improved AI can solve a single partial differential equation for the calculation variable Gtilde alone by substituting derived expressions, reducing complex tidal equations to a single equation for Gtilde.

  6. Improved AI can determine resonance frequencies of tidally excited Lamb waves by minimizing the denominator D psigma q in absolute value, leading to expressions like sigma L;n equals 1/R d gHs |Lambda m,nu n| / 1-gamma.

  7. Improved AI can identify the two specific atmospheric structures—strictly isentropic and isothermal—as the only configurations that permit analytic treatment of the tidal response.

  8. Improved AI can express the tidal torque induced by semidiurnal thermal tides on rocky planets as a function of tidal frequency and physical parameters, showing agreement with General Circulation Model solutions for Earth and Venus.

Abstract

Atmospheric thermal tides arise from the diurnal contrast in stellar irradiation. They exert a significant influence on the long-term rotational evolution of rocky planets because they can accelerate the planetary spin, thereby counteracting the decelerating effect of classical gravitational tides. Consequently, equilibrium tide-locked states may emerge, as exemplified by Venus and hypothesised for Precambrian Earth. Quantifying the atmospheric thermal torque and elucidating its dependence on tidal frequency -- both in the low- and high-frequency regimes -- is therefore essential. In particular, we focus here on the resonance that affected early Earth, which is associated with a forced Lamb wave. Within the framework of linear theory, we develop a new analytical model of the atmospheric response to both gravitational an thermal tidal forcings for two representative vertical temperature profiles that bracket the atmospheres of rocky planets: (i) an isothermal profile (uniform temperature) and (ii) an isentropic profile (uniform potential temperature). Dissipative processes are incorporated via Newtonian cooling. We demonstrate that the isothermal and isentropic cases are governed by the same general closed-form solution, and we derive explicit expressions for the three-dimensional tidal fields (pressure, temperature, density and wind velocities) throughout the spherical atmospheric shell. These results constitute the foundation for two forthcoming papers, in which analytical formulae for the thermotidal torque will be presented and compared with numerical solutions obtained from General Circulation Models (GCMs).

Sources

Related papers