Fast far-sidelobe modeling for centimeter to sub-millimeter astrophysical observations

arXiv:2511.16967 · astro-ph.IM · Submitted 2025-11-21 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Astrophysics. The day in astrophysics: observations, models and what the data forces.

Vera: I'm Vera.

Jocelyn: And I'm Jocelyn, here with Subrahmanyan.

Vera: We're looking at the paper: "Fast far-sidelobe modeling for centimeter to sub-millimeter astrophysical observations".

Jocelyn: Here's the gist of the paper. Next-generation centimeter to sub-millimeter telescopes require exquisite control over instrumental far-sidelobe response to accurately measure faint signals like the Cosmic Microwave Background B modes <ref:2511.16967v2

astro-ph.IM: 1>.

Vera: Because existing electromagnetic modeling methods are computationally expensive, this paper developed a novel, diffraction-based beam modeling method for rapid and low-cost calculations <ref:2511.16967v2

astro-ph.IM: 3>.

Jocelyn: This framework is most valuable as a tool for optimizing instrument baffling and identifying efficient scan strategies during the conceptual design phase <ref:2511.16967v2

astro-ph.IM: 5>.

Vera: The Problem of Stray Radiation Ground-based millimeter-wave telescopes face a critical challenge where their detectors are highly susceptible to spurious signals from unwanted sources <ref:2511.16967v2

astro-ph.IM: 3>.

Paper summary: Vera: So we're looking at this paper now titled "Fast far-sidelobe modeling for centimeter to sub-millimeter astrophysical observations," and the core idea is that next generation telescopes need really precise control over what happens outside the main beam to accurately measure faint signals like those Cosmic Microwave Background B modes <ref:2511.16967#pg2>.

Jocelyn: Exactly. They're saying existing ways of modeling this instrumental response are just too slow and expensive for what we need right now, so they developed a new diffraction-based method for doing these calculations quickly and cheaply <ref:2511.16967#pg1>.

Subrahmanyan: And why is that speed important? Because the observation of those B modes is key because it would give us evidence for inflation, which is this period of exponential expansion in the early Universe <ref:2511.16967#pg2>. If we can't model this stray radiation well, we can't trust our results about those primordial gravitational waves <ref:2511.16967#pg3>.

Vera: Right. The paper focuses on how these telescopes are susceptible to spurious signals, and they break down the stray radiation into four main types: specular reflection causing ghost beams, scattering from surfaces like windows, diffraction by the internal shields, and thermal emission from the instrument itself <ref:2511.16967#pg3>.

Jocelyn: That sounds like a lot of sources for contamination. What's their approach to actually figuring out how much that stray light pickup will be?

Subrahmanyan: Well, they use the geometric theory of diffraction to model the light propagation between the sky and the focal plane <ref:2511.16967#pg3>. They use something called the Rayleigh-Sommerfeld diffraction integral to mathematically formalize how light deviates when it hits an aperture or object <ref:2511.16967#pg3>.

Vera: It sounds like they model the detector as a light source propagating through the whole optical system, starting not at the focal plane but at the main-lobe defining entrance aperture of a telescope <ref:2511.16967#pg1>. That’s a specific way to set up their calculation.

Jocelyn: They then use this algorithm to calculate the angle-dependent response, or what they call the beam, of the telescope using Diffractio <ref:2511.16967#pg3>. So, it's essentially calculating a whole beam profile based on how light travels through everything <ref:2511.16967#pg3>.

Subrahmanyan: And they validated this by modeling the beam of the BICEP3 instrument and comparing it against published beam profiles <ref:2511.16967#pg4>. They model each angle of propagation from the aperture's center as a different pixel on the focal plane <ref:2511.16967#pg4>.

Vera: The simulation showed good agreement with measured BICEP3 data across the main lobe and in macro-features like the primary cutoff angle <ref:2511.16967#pg5>. But they found a noticeable deviation in the far-angle sidelobe profile, which they attribute to contributions from other sources of stray light <ref:2511.16967#pg5>.

Jocelyn: So even with this new fast method, the far sidelobe isn't perfectly predicted yet because of those other unknown stray light contributions <ref:2511.16967#pg5>. That’s a real caveat to have when you're trying to get ultra-sensitive data.

Subrahmanyan: And they took this validated simulated beam and used it to calculate the sidelobe pickup for a specific observation scenario near the slopes of Cerro Toco in the Atacama Desert <ref:2511.16967#pg4>. They did this by convolving the telescope’s center detector beam with a HEALPix environment map, incorporating emission from the sky, ground screen, and that specific location <ref:2511.16967#pg4>.

Vera: And what's the concrete result from that application? Figure seven shows that the forebaffle provides substantial suppression of total power pickup at all azimuthal angles <ref:2511.16967#pg7>. That’s a direct win for instrument design, showing how much shielding helps reduce noise.

Jocelyn: It sounds like this modeling tool isn't just academic; it’s something you can actually use to optimize the physical baffling and identify better scanning strategies during the initial conceptual design phase <ref:2511.16967#pg1>. That makes it practical for instrument builders.

Subrahmanyan: The implication for cosmology is that if these modeling methods are fast and reliable, we can start designing instruments that are truly optimized to minimize this contamination, which in turn lets us better constrain the primordial B-mode signal <ref:2511.16967#pg2>.

Vera: So, to summarize this paper on "Fast far-sidelobe modeling for centimeter to sub-millimeter astrophysical observations," they developed a rapid, diffraction-based tool because old methods were too slow and expensive <ref:2511.16967#pg1>. They validated it by comparing their simulation of the BICEP3 beam against in situ measurements, finding good agreement except for those far-angle sidelobes <ref:2511.16967#pg4>.

Jocelyn: And they used this to calculate how much noise you pick up at a specific spot, like near Cerro Toco, where the forebaffle provided significant suppression of power pickup across all angles <ref:2511.16967#pg7>.

Subrahmanyan: The takeaway is that this method lets us rapidly compare different baffle geometries and configurations without needing those computationally prohibitive full-wave simulations during the design phase <ref:2511.16967#pg7>.

Vera: It seems like the main utility here is using this validated simulated beam to quickly calculate sidelobe pickup, which helps engineers decide exactly how much shielding they need <ref:2511.16967#pg4>.

Jocelyn: And it keeps us focused on what matters for the actual data, moving past the slow modeling and into practical optimization for future CMB experiments <ref:2511.16967#pg3>.

Conclusion: Vera: So, we're wrapping up this look at "Fast far-sidelobe modeling for centimeter to sub-millimeter astrophysical observations." Basically, they took this new diffraction method and proved it works for rapidly calculating how much stray light you pick up in these next big telescopes <ref:2511.16967#pg7>.

Jocelyn: Yeah, they used a simulated beam from the BICEP3 instrument to test their math against real measurements, and it lined up pretty well across the main lobe <ref:2511.16967#pg4>. But they found that those far-angle sidelobes still have some unexpected noise contributions <ref:2511.16967#pg5>.

Subrahmanyan: That means even with a fast calculation method, you still have to worry about those complex stray light sources when you're trying to measure the faint CMB B modes <ref:2511.16967#pg8>. It’s not just about making the math quick; it’s about controlling the real-world environment of the instrument <ref:2511.16967#pg3>.

Vera: Exactly. The authors are showing how this framework helps us optimize those physical things like baffling and scanning strategies during the design phase <ref:2511.16967#pg5>. It’s a tool for engineers to make sure the hardware is actually doing what it’s supposed to do <ref:2511.16967#pg7>.

Jocelyn: And when you look at the results, they showed that using a forebaffle really cuts down on power pickup across all angles in their specific Atacama desert scenario <ref:2511.16967#pg7>. That’s a concrete win for reducing noise in observation planning <ref:2511.16967#pg4>.

Subrahmanyan: From a cosmological standpoint, this means we can start designing instruments that are better at rejecting that background noise, which lets us get closer to measuring the primordial gravitational wave signal <ref:2511.16967#pg8>. It’s about getting cleaner data for inflation tests <ref:2511.16967#pg3>.

Vera: So the authors are pushing this fast modeling tool as a way to move past slow, heavy full-wave simulations when you're in the conceptual design stage <ref:2511.16967#pg7>. It’s about making instrument development faster and more informed.

Jocelyn: And while they got good qualitative agreement with BICEP3 data, the limitation is that their far-angle sidelobe prediction still depends on modeling those other stray light sources <ref:2511.16967#pg5>. It's a step forward, but we still have to figure out those tricky bits <ref:2511.16967#pg3>.

Subrahmanyan: Exactly. The implication is that this kind of rapid modeling is essential for designing the next generation of small aperture telescopes so we can actually hope to measure those tiny B modes in the sky <ref:2511.16967#pg8>.

CNRS-UCB International Research Laboratory · Lawrence Berkeley National Laboratory · Université Paris Citée, CNRS, Astroparticule et Cosmologie

astro-ph.IM

Submitted: 2025-11-21

Updated: 2026-11-05

Comments: 10 pages, 6 figures. Published in JCAP;

Journal ref: JCAP10(2026)056

DOI: 10.1088/1475-7516/2026/10/056

Code: https://github.com/objeong-astro/BeamModel

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 91/100

The gist: Next-generation centimeter to sub-millimeter telescopes require exquisite control over instrumental far-sidelobe response to accurately measure faint signals like the Cosmic Microwave Background B…

Key concepts

Far-sidelobe Response
This refers to the unwanted radiation or 'ghost beams' produced by a telescope that spreads light beyond its main intended beam. Controlling these sidelobes is crucial for accurately measuring faint signals like the Cosmic Microwave Background.
Diffraction Theory
This geometric theory models how light bends and spreads when it passes through an aperture or obstacle, which is necessary for accurate modeling of how radiation propagates from a telescope to its detectors.
Beam Modeling Methodology
The method uses the Rayleigh-Sommerfeld diffraction integral to mathematically calculate the angle-dependent response (the beam) of a telescope. It starts at the entrance aperture and models light propagation through the optical system.

Terminology

Summary

Next-generation centimeter to sub-millimeter telescopes require exquisite control over instrumental far-sidelobe response to accurately measure faint signals like the Cosmic Microwave Background B modes <ref:2511. p. 0

Where the paper says it

fr Abstract. Next-generation centimeter to sub-millimeter telescopes require exquisite control over instrumental far-sidelobe response to accurately measure faint signals like the Cosmic Microwave Background B modes.

16967v2[astro-ph. p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

p. 0
Where the paper says it

arXiv:2511. 16967v2 [astro-ph.

IM] 1>. Because existing electromagnetic modeling methods are computationally expensive, this paper developed a novel, diffraction-based beam modeling method for rapid and low-cost calculations <ref:2511. p. 0
Where the paper says it

Next-generation centimeter to sub-millimeter telescopes require exquisite control over instrumental far-sidelobe response to accurately measure faint signals like the Cosmic Microwave Background B modes. Because existing electromagnetic modeling methods are computationally expensive, we developed a novel, diffraction-based beam modeling method for rapid and low-cost calculations.

16967v2[astro-ph.IM] 3>. This framework is most valuable as a tool for optimizing instrument baffling and identifying efficient scan strategies during the conceptual design phase <ref:2511. p. 0
Where the paper says it

This rapid, predictive framework is most valuable as a tool for optimizing instrument baffling and identifying efficient scan strategies during the conceptual design phase. ArXiv ePrint: 2511.

16967v2[astro-ph.IM] 5>.

The Problem of Stray Radiation

Ground-based millimeter-wave telescopes face a critical challenge where their detectors are highly susceptible to spurious signals from unwanted sources <ref:2511.16967v2[astro-ph.IM] 3>. The most concerning systematics include stray radiation from the ground and bright celestial objects like the Sun <ref:2511. p. 2

Where the paper says it

2 Problem of stray radiation Ground-based millimeter-wave telescopes, such as those used for detecting faint signals like the CMB B modes or fluctuations of atomic and molecular emission lines, face a critical challenge: their detectors are highly susceptible to spurious signals from unwanted sources. The most concerning systematics include stray radiation from the ground and bright celestial objects like the Sun.

16967v2[astro-ph.IM] 3>. To mitigate excessive contamination, observations must be constrained to ranges of allowed azimuth and elevations, ensuring that the brightest sources of stray radiation are kept far from the telescope’s line of sight <ref:2511. p. 2
Where the paper says it

The most concerning systematics include stray radiation from the ground and bright celestial objects like the Sun. To mitigate excessive contamination, observations must be constrained to ranges of allowed azimuth and elevations, ensuring that the brightest sources of stray radiation are kept far from the telescope’s line of sight.

16967v2[astro-ph.IM] 3>. The detectors register the integral of fluctuations from various forms of stray radiation, categorized into four main types:

  1. Specular reflection of off-axis rays causing “ghost beams” or strong sidelobes <ref:2511.16967v2[astro-ph.IM] 3>.

  2. Scattering of microwave radiation by surfaces optically coupled to the detectors, such as the vacuum window or entrance aperture <ref:2511.16967v2[astro-ph.IM] 3>.

  3. Diffraction of microwave radiation by the rims of the internal shields and baffles <ref:2511.16967v2[astro-ph.IM] 3>.

  4. Thermal emission from the instrument itself, often due to absorbed sunlight being re-emitted <ref:2511.16967v2[astro-ph.IM] 3>.

Diffraction Modeling Methodology

The authors employ the geometric theory of diffraction to model light propagation between the sky and the focal plane <ref:2511.16967v2[astro-ph.IM] 3>. Geometric optics is described as the simplest model, where light deviates from straight-line propagation when it encounters an aperture or object, leading to diffraction <ref:2511. p. 3

Where the paper says it

Geometric optics is the simplest model of light propagation, in which rays travel in straight lines until refracted or reflected as described by Snell’s law and Fresnel equations, respectively. When the light encounters an aperture or object, it deviates from straight-line propagation and diffracts.

16967v2[astro-ph.IM] 3>. The Rayleigh-Sommerfeld diffraction integral mathematically formalizes this deviation <ref:2511. p. 3
Where the paper says it

These wavelets then collectively form a new wavefront that bends, or diffracts, around the edges of the aperture. This is mathematically formalized by the Rayleigh-Sommerfeld diffraction integral, E (x, y, z) = 1 iλ Z Z +∞ −∞ E x ′ , y′ , 0 e ikr r z r 1 + i kr dx′ dy′ (3.

16967v2[astro-ph.IM] 3>. The method utilizes an algorithm to calculate the angle-dependent response, or the beam, of a telescope using Diffractio <ref:2511. p. 3
Where the paper says it

2 to model its propagation through the telescope and to the sky. 2 Review of the method We developed an algorithm1 to calculate the angle-dependent response, or the beam, of a telescope using Diffractio [2], an open-source Python package, to model the propagation of light through free-space and diffracting apertures.

16967v2[astro-ph.IM] 3>. This involves modeling the detector as a light source whose emission propagates through the optical system to the image plane <ref:2511. p. 3
Where the paper says it

2 Review of the method We developed an algorithm1 to calculate the angle-dependent response, or the beam, of a telescope using Diffractio [2], an open-source Python package, to model the propagation of light through free-space and diffracting apertures. Diffractio uses a time-reversed approach, where the detector is modeled as a light source whose emission propagates through the optical system to the image plane.

16967v2[astro-ph.IM] 3>. The model initiates not at the focal plane, but at the main-lobe defining entrance aperture of a telescope <ref:2511. p. 4
Where the paper says it

FFT module handles far-field propagation via the Fraunhofer diffraction integral. In this paper, we initiate our model not at the focal plane, but at the main-lobe defining entrance aperture of a telescope.

16967v2[astro-ph.IM] 5>.

Simulated Beam Validation

The researchers model the beam of the BICEP3 instrument and compare it against published beam profiles <ref:2511.16967v2[astro-ph.IM] 4>. The simulation models each distinct angle of propagation from the aperture’s center as a different pixel on the focal plane <ref:2511. p. 5

Where the paper says it

entrance aperture, we model its beam as originating from this aperture’s center. In this model, each distinct angle of propagation from the aperture’s center emulates a different pixel on the focal plane, encompassing a uniform distribution of solid angles within the telescope’s defined field of view (FOV) and incorporating the appropriate beam waist.

16967v2[astro-ph.IM] 4>. They multiply these near-field beams by the aperture function of the baffle and then compute their far-field diffraction integral to calculate the beam profile of a pixel of BICEP3 <ref:2511. p. 5
Where the paper says it

Figure 2 shows the beam intensity at the entrance of the BICEP3 forebaffle for a center and edge pixel after computing the Rayleigh-Sommerfield diffraction integral of the fields at the entrance aperture. We multiply these near-field beams by the aperture function of the baffle and then compute their far-field diffraction integral to calculate the beam profile of a pixel of BICEP3.

16967v2[astro-ph.IM] 4>. The resulting beam profiles show good agreement with measured BICEP3 data across the main lobe and in macro-features like the primary cutoff angle <ref:2511. p. 6
Where the paper says it

profile with the forebaffle exhibits a sharp power cutoff at approximately 33◦ , which corresponds to the geometric angle subtended between the far edges of the pupil aperture and the forebaffle. As shown in Figure 5, the simulated beam profiles are in good agreement with the measured BICEP3 data from [3] across the main lobe and in macro-features like the primary cutoff angle.

16967v2[astro-ph.IM] 5>. However, a noticeable deviation is observed in the far-angle sidelobe profile, which is attributed to contributions from other sources of stray light <ref:2511. p. 6
Where the paper says it

However, a noticeable deviation is observed in the far-angle sidelobe profile. This discrepancy is attributed to the fact that actual sidelobe power is not solely a product of diffraction but also incorporates contributions from other sources of stray light, such as scattering on the surfaces of various optical elements.

16967v2[astro-ph.IM] 5>.

Application to Observation Scenarios

The validated simulated beam was used to calculate the sidelobe pickup for a specific observation scenario near the slopes of Cerro Toco in the Atacama Desert <ref:2511.16967v2[astro-ph.IM] 4>. The simulation convolves the telescope’s center detector beam with a HEALPix environment map, incorporating emission from the sky, ground screen, and Cerro Toco <ref:2511. p. 7

Where the paper says it

We calculate the total sidelobe power pickup in the Rayleigh-Jean limit for a BICEP3- like telescope observing near the slopes of Cerro Toco in the Atacama Desert, where small aperture telescopes of Simons Observatory [6] are located. The simulation convolves the telescope’s center detector beam with a HEALpix environment map, shown in Figure 6, incorporating emission from the sky, ground screen, and Cerro Toco.

16967v2[astro-ph.IM] 4>. The total sidelobe power pickup is determined by convolving this environment map with the beam map placed at a specific scanning coordinate and subtracting the azimuthally symmetric power pickup in the absence of Cerro Toco <ref:2511. p. 7
Where the paper says it

The surface of Cerro Toco is modeled at 270 K temperature with fluctuations of 2◦ scale and 5 K RMS. The total sidelobe power pickup is determined by convolving this environment map with the beam map placed at a specific scanning coordinate (see Figure 3) and subtracting the azimuthally symmetric power pickup in the absence of Cerro Toco.

16967v2[astro-ph.IM] 4>. Figure 7 demonstrates that the forebaffle provides substantial suppression of total power pickup at all azimuthal angles <ref:2511. p. 7
Where the paper says it

Figure 7 demonstrates the gain in sidelobe power pickup achieved using the forebaffle for scans at a constant elevation of 50◦ and 65◦ . The forebaffle provides substantial suppression of total power pickup at all azimuthal angles.

16967v2[astro-ph.IM] 7>.

Conclusion and Utility

The methodology shows good qualitative agreement with the in situ measured BICEP3 beam <ref:2511.16967v2[astro-ph.IM] 5>. This validated simulated beam was subsequently used to calculate the sidelobe pickup for a specific observation scenario near the slopes of Cerro Toco in the Atacama Desert <ref:2511. p. 8

Where the paper says it

our methodology shows good qualitative agreement with the in situ measured BICEP3 beam. This validated simulated beam was subsequently used to calculate the sidelobe pickup for a specific observation scenario near the slopes of Cerro Toco in the Atacama Desert.

16967v2[astro-ph.IM] 7>. This beam modeling method is most valuable as a tool for rapid comparison and optimization across various baffle geometries and instrument configurations, minimizing the need for highly detailed and computationally prohibitive full-wave simulations during the conceptual design phase <ref:2511. p. 8
Where the paper says it

The simulation showed a significant difference in sidelobe pickup between the observation with the forebaffle on and the observation with the forebaffle off. This beam modeling method is most valuable as a tool for rapid comparison and optimization across various baffle geometries and instrument configurations, minimizing the need for highly detailed and computationally prohibitive full-wave simulations during the conceptual design phase.

16967v2[astro-ph.IM] 7>. The simulation showed a significant difference in sidelobe pickup between the observation with the forebaffle on and the observation with the forebaffle off <ref:2511. p. 8
Where the paper says it

This validated simulated beam was subsequently used to calculate the sidelobe pickup for a specific observation scenario near the slopes of Cerro Toco in the Atacama Desert. The simulation showed a significant difference in sidelobe pickup between the observation with the forebaffle on and the observation with the forebaffle off.

16967v2[astro-ph.IM] 7>.

Acknowledgments

The authors thank colleagues at LBNL––Bobby Besuner, Shamik Ghosh, John Groh, Reijo Keskitalo, Adrian T. Lee, and Clara Verg´es for useful discussions <ref:2511. p. 8

Where the paper says it

Acknowledgments The authors thank colleagues at LBNL––Bobby Besuner, Shamik Ghosh, John Groh, Reijo Keskitalo, Adrian T. Lee, and Clara Verg`es, for useful discussions.

16967v2[astro-ph.IM] 9>. Some of the results in this paper have been derived using the healpy and HEALPix packages <ref:2511. p. 8
Where the paper says it

Lee, and Clara Verg`es, for useful discussions. Some of the results in this paper have been derived using the healpy and HEALPix packages.

16967v2[astro-ph.IM] 9>.

References

[1] J. Delabrouille, O. p. 0

Where the paper says it

Prepared for submission to JCAP Fast far-sidelobe modeling for centimeter to sub-millimeter astrophysical observations Oliver Jeong,a,b,1 Jacques Delabrouille,a,b,1 and Michel Piatc,a,b aCNRS-UCB International Research Laboratory, Centre Pierre Bin´etruy, IRL 2007, CPB-IN2P3, Berkeley, CA 94720, USA bLawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720, USA cUniversit´e Paris Cit´e, CNRS, Astroparticule et Cosmologie, F-75013 Paris, France E-mail: objeong@lbl. gov, delabrouille@apc.

Jeong, M. Piat and A. p. 0
Where the paper says it

gov, delabrouille@apc. fr, piat@apc.

Steier, “A novel double-rim forebaffle design for centimeter to sub-millimeter astrophysical observations. p. 9
Where the paper says it

Piat and A. Steier, “A novel double-rim forebaffle design for centimeter to sub-millimeter astrophysical observations.

” 2025 <ref:2511. p. 0
Where the paper says it

16967v2 [astro-ph. IM] 22 Dec 2025

16967v2[astro-ph.IM] 10>.

[2] L.M. Sanchez-Brea, A. p. 9

Where the paper says it

Steier, “A novel double-rim forebaffle design for centimeter to sub-millimeter astrophysical observations. Sanchez-Brea, A.

Soria-Garcia, J. p. 9
Where the paper says it

Sanchez-Brea, A. Soria-Garcia, J.

Andres-Porras, V. p. 9
Where the paper says it

Soria-Garcia, J. Andres-Porras, V.

Pastor-Villarrubia, M. p. 9
Where the paper says it

Andres-Porras, V. Pastor-Villarrubia, M.

H. Elshorbagy, J del Hoyo Mu˜noz et al. p. 9
Where the paper says it

Elshorbagy, J. del Hoyo Mu˜noz et al.

, Diffractio: an open-source library for diffraction and interference calculations, in Optics and Photonics for Advanced Dimensional Metrology III, P. p. 9
Where the paper says it

del Hoyo Mu˜noz et al. , Diffractio: an open-source library for diffraction and interference calculations, in Optics and Photonics for Advanced Dimensional Metrology III, P.

J. de Groot, F Guzman and P Picart, eds. p. 9
Where the paper says it

Guzman and P. Picart, eds.

, vol 129971B, International Society for Optics and Photonics, SPIE, 2024 <ref:2511. p. 9
Where the paper says it

Picart, eds. 129971B, International Society for Optics and Photonics, SPIE, 2024, DOI.

16967v2[astro-ph.IM] 10>.

[3] C. Giannakopoulos, C Verg´es, P. p. 9

Where the paper says it

Giannakopoulos, C. Verg`es, P.

A.R Ade, Z Ahmed, M Amiri, D Barkats et al. p. 9
Where the paper says it

Verg`es, P. Barkats et al.

, Calibration measurements of the bicep3 and bicep array cmb polarimeters from 2017 to 2024, 2024 <ref:2511. p. 9
Where the paper says it

Barkats et al. , Calibration measurements of the bicep3 and bicep array cmb polarimeters from 2017 to 2024, 2024.

16967v2[astro-ph.IM] 9>.

[4] K.M G´orski, E Hivon, AJ Banday, B D Wandelt, FK Hansen, M Reinecke et al. p. 9

Where the paper says it

G´orski, E. Wandelt, F.

, Healpix: A framework for high-resolution discretization and fast analysis of data distributed on the sphere, Astrophys. p. 9
Where the paper says it

Reinecke et al. , Healpix: A framework for high-resolution discretization and fast analysis of data distributed on the sphere, Astrophys.

J. 622 (2005) 759 <ref:2511. p. 9
Where the paper says it

, Healpix: A framework for high-resolution discretization and fast analysis of data distributed on the sphere, Astrophys. 622 (2005) 759.

16967v2[astro-ph.IM] 10>.

[5] J H Kang, P A R Ade, Z Ahmed, R W Aikin, K D Alexander, D Barkats et al. p. 9

Where the paper says it

Alexander, D. Barkats et al.

, 2017 upgrade and performance of BICEP3: a 95GHz refracting telescope for degree-scale CMB polarization, in Millimeter Submillimeter and Far-Infrared Detectors and Instrumentation for Astronomy IX, J Zmuidzinas and J. p. 9
Where the paper says it

, 2017 upgrade and performance of BICEP3: a 95GHz refracting telescope for degree-scale CMB polarization, in Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX, J. Zmuidzinas and J.

-R Gao, eds. p. 9
Where the paper says it

Guzman and P. Picart, eds.

, vol 10708 of Society of Photo-Optical Instrumentation Engineers (SPIE) Conference Series, p. p. 9
Where the paper says it

Zmuidzinas and J. 10708 of Society of Photo-Optical Instrumentation Engineers (SPIE) Conference Series, p.

107082N, July, 2018 <ref:2511. p. 9
Where the paper says it

10708 of Society of Photo-Optical Instrumentation Engineers (SPIE) Conference Series, p. 107082N, July, 2018, DOI [1808.

16967v2[astro-ph.IM] 9>.

[6] N Galitzki, T Tsan, J Spisak, M Randall, M Silva-Feaver, J Seibert et al. p. 9

Where the paper says it

Randall, M. Silva-Feaver, J.

, The Simons Observatory: Design, Integration, and Testing of the Small Aperture Telescopes, Astrophys. p. 9
Where the paper says it

Seibert et al. , The Simons Observatory: Design, Integration, and Testing of the Small Aperture Telescopes, Astrophys.

J. 274 (2024) 33 <ref:2511. p. 9
Where the paper says it

, The Simons Observatory: Design, Integration, and Testing of the Small Aperture Telescopes, Astrophys. 274 (2024) 33 [2405.

16967v2[astro-ph.IM] 10>.

[7] J Errard, P A R Ade, Y Akiba, K Arnold, M Atlas, C Baccigalupi et al. p. 7

Where the paper says it

The simulation convolves the telescope’s center detector beam with a HEALpix environment map, shown in Figure 6, incorporating emission from the sky, ground screen, and Cerro Toco. The sky temperature is modeled at 1 mm precipitable water vapor, with the atmospheric path length scaling with the cosecant of the observing elevation angle, as detailed in Errard et al.

, Modeling atmospheric emission for cmb ground-based observations, The Astrophysical Journal 809 (2015) 63 <ref:2511. p. 9
Where the paper says it

Baccigalupi et al. , Modeling atmospheric emission for cmb ground-based observations, The Astrophysical Journal 809 (2015) 63.

16967v2[astro-ph.IM] 9>.

[8] Current and forthcoming experiments are designed to search for the degree-scale parity-odd B-mode polarization pattern of the CMB — a signature imprint of primordial gravitational waves generated during cosmic inflation <ref:2511. p. 1

Where the paper says it

Over the past five decades, CMB experiments have measured its anisotropies with remarkable precision, significantly advancing our understanding of the composition and evolution of the Universe. Current and forthcoming experiments are designed to search for the degree-scale parity-odd B-mode polarization pattern of the CMB — a signature imprint of primordial gravitational waves generated during cosmic inflation.

16967v2[astro-ph.IM] 1>.

[9] Next-generation CMB experiments approach unprecedented sensitivity levels, we must demonstrate exquisite knowledge and control of instrumental systematics of its small aperture telescopes (SAT) to detect primordial B modes <ref:2511. p. 1

Where the paper says it

However, this primordial B-mode signal is expected to be extremely faint and remains undetected by current CMB experiments. As next-generation CMB experiments approach unprecedented sensitivity levels, we must demonstrate exquisite knowledge and control of instrumental systematics of its small aperture telescopes (SAT) to detect primordial B modes.

16967v2[astro-ph.IM] 2>.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Fast far-sidelobe modeling for centimeter to sub-millimeter astrophysical observations can be integrated into instrument conceptual design tools. The improved AI system could rapidly calculate the sidelobe temperature pickup for a specific observation scenario by using the validated simulated beam, making it a tool for optimizing instrument baffling and identifying efficient scan strategies during the conceptual design phase.

  2. The AI system can perform rapid comparison of different baffle geometries against in situ measurements. By using the diffraction-based method to model BICEP3 far sidelobe radiation patterns, the system can determine the gain in sidelobe power pickup achieved using the forebaffle, allowing designers to choose configurations that provide strong suppression of total power pickup at all azimuthal angles.

  3. The system can optimize scanning strategies based on environmental data. It can convolve the telescope's center detector beam with an environment map, such as the one containing emission from the sky, ground screen, and Cerro Toco, to calculate sidelobe pickup under specific observation conditions.

Abstract

Next-generation centimeter to sub-millimeter telescopes require exquisite control over instrumental far-sidelobe response to accurately measure faint signals like the Cosmic Microwave Background B modes. Because existing electromagnetic modeling methods are computationally expensive, we developed a novel, diffraction-based beam modeling method for rapid and low-cost calculations. We applied this methodology to model the BICEP3 far-sidelobes and found good qualitative agreement with in situ beam measurements. Using this validated simulated beam, we calculated the sidelobe temperature pickup for a specific observation scenario: scanning near the slopes of Cerro Toco in the Atacama Desert. This rapid, predictive framework is most valuable as a tool for optimizing instrument baffling and identifying efficient scan strategies during the conceptual design phase.

Sources

Related papers