Non-ohmic to ohmic crossover in the breakdown of the quantum Hall states in graphene under broadband excitations

arXiv:2509.19978 · cond-mat.mes-hall · Submitted 2025-09-24 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.

Kai: We're looking at the paper: "Non-ohmic to ohmic crossover in the breakdown of the quantum Hall states in graphene under broadband excitations".

Mira: Here's the gist of the paper. Graphene's quantum Hall effect breakdown exhibits a universal crossover from non-ohmic to ohmic transport governed by localization energy scales.

Kai: Core Findings on Breakdown Mechanisms The study demonstrates that the breakdown in the quantum Hall regime of graphene is governed by a crossover from non-ohmic, field-driven VRH to ohmic, Joule-heating–dominated transport.

Mira: This crossover is controlled solely by the localization energy kBT0.

Kai: The key finding is that QH breakdown is not governed by a single mechanism, but by a universal crossover between fielddriven VRH and heating-dominated transport.

Paper summary: Kai: So we just finished looking at how graphene's quantum Hall breakdown switches between non-ohmic and ohmic transport under broadband excitation.

Mira: Yeah, this paper by the authors is really focused on that crossover point, right? It’s about how field-driven variable range hopping transitions into heating dominated transport.

Lev: From my side, I’m thinking about what that means for the actual hardware we try to build; it sets a limit on how much voltage we can safely push before dissipation takes over.

Kai: Exactly, and the paper shows this crossover voltage scales with the localization energy scale, T0, which is essentially tied to how localized the carriers are.

Mira: And that’s significant because it means we can predict when things will start to fail based on those intrinsic material properties rather than just brute force field strength.

Lev: I worry about the numbers; if T0 is too small, that crossover voltage Uc shoots up really fast, making our error correction overhead way higher.

Kai: But the authors are also pointing out that this mechanism is robust, it works for both electron and hole doping in graphene across different magnetic fields.

Mira: That universality is what’s compelling; it suggests the fundamental physics of localization dictates the breakdown regardless of which carrier you start with.

Lev: So, if we can map out these T0 dependencies, maybe we can design better materials that inherently resist this kind of transition to ohmic behavior when we need high fidelity.

Kai: Yeah, and they confirm that even at very high frequencies, the underlying physics driving this isn't changing much; it’s still tied to those localized states tunneling between them.

Mira: It really puts the focus on the bulk conduction properties of graphene rather than just surface effects or some external drive we put on it.

Lev: So, if we can understand this crossover point better, maybe we get a clearer picture of how much noise and heat will actually land on our quantum devices in these regimes.

Conclusion: Kai: So we're wrapping up this deep dive into graphene’s quantum Hall states and their breakdown under high excitation, focusing on that non-ohmic to ohmic crossover point in this paper by the authors "Non-ohmic to ohmic crossover in the breakdown of the quantum Hall states in graphene under broadband excitations."

Mira: Basically, what they've shown is that when you look at how these quantum states fail under a strong electric field, it doesn't just follow one simple rule. It switches between two different modes: one driven by the field itself, and another where heat from the current dominates everything.

Lev: That switch is governed by this localization energy scale, T0, which tells us how tightly bound the carriers are in the material.

Kai: Right, so instead of just guessing when things will get messy based on how strong you push it, this paper gives us a specific way to predict that crossover voltage Uc using that T0 term.

Mira: And they show this is super universal; it holds true whether you are looking at electron carriers or hole carriers in graphene, and even across different magnetic fields.

Lev: That’s what’s important for real hardware; if the physical mechanism stays the same regardless of those parameters, then we have a much more stable way to manage dissipation.

Kai: They also proved that this isn't just a high-frequency thing; it holds true even when you test it up to ten gigahertz, confirming that the core physics is about these localized states tunneling between each other.

Mira: So the big picture here is that understanding how this transition happens—from field-driven hopping to heating dominated transport—is actually the key to designing stable quantum devices in graphene at high operating voltages.

Lev: Because if we can predict exactly where that dissipation kicks in based on these material properties, we can build better error correction schemes for those systems.

Kai: That sets up a great next step because now that we understand the physics of the breakdown itself, we need to look at how this translates into actual noise and heat when you start running full circuits.

Torsten Réoper, Aifei Zhang, Kenji Watanabe, Takashi Taniguchi, Olivier Maillet, Ércois D. Parmentier, Érwann Bocquillon

II. Physikalisches Institut, Universität zu Kཫln · Universitǩ Paris-Saclay · Research Center for Electronic and Optical Materials, National Institute for Materials Science · Research Center for Materials Nanoarchitectonics, National Institute for Materials Science · Laboratoire de Physique de l’Ecole Normale Supérieure, Universitǩ PSL

cond-mat.mes-hall

Submitted: 2025-09-24

Updated: 2025-10-09

Comments: Main text (6 pages, 4 figures) and Supplementary material

Journal ref: Phys. Rev. Lett. 137, 156602 (2026)

DOI: 10.1103/5kkx-rcdh

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 92/100

The gist: Graphene's quantum Hall effect breakdown exhibits a universal crossover from non-ohmic to ohmic transport governed by localization energy scales.

Key concepts

Quantum Hall Effect Breakdown
This refers to the point where the quantum Hall regime in graphene ceases to behave as expected. The breakdown occurs because the system transitions from a highly quantized, non-ohmic state driven by electric fields to a dissipative, ohmic state where energy is dissipated through heating.
Non-ohmic vs. Ohmic Transport
Non-ohmic transport is characterized by voltage and current relationships that are not simple linear proportionality. Ohmic transport means the current scales linearly with the applied voltage, typical of simple resistive materials. The paper shows a crossover between these two regimes in graphene's breakdown.
Localization Energy Scale ($k_BT_0$)
This scale, related to localization energy and temperature, is the single controlling factor for the breakdown crossover. It dictates whether transport is dominated by field-driven mechanisms or Joule heating. This parameter determines the onset of dissipation in the quantum Hall regime.

Terminology

Summary

Graphene's quantum Hall effect breakdown exhibits a universal crossover from non-ohmic to ohmic transport governed by localization energy scales.

Core Findings on Breakdown Mechanisms

The study demonstrates that the breakdown in the quantum Hall regime of graphene is governed by a crossover from non-ohmic, field-driven VRH to ohmic, Joule-heating–dominated transport. This crossover is controlled solely by the localization energy kBT0. p. 1

Where the paper says it

This broad coverage enables us to resolve the crossover from non-ohmic to ohmic transport, overlooked in earlier studies [7–10] that primarily focused on large cyclotron gaps and thus probed only the high–T0 regime. Our key finding is that QH breakdown is not governed by a single mechanism, but by a universal crossover between fielddriven VRH and heating-dominated transport, controlled solely by the localization energy kBT0.

The key finding is that QH breakdown is not governed by a single mechanism, but by a universal crossover between fielddriven VRH and heating-dominated transport. p. 1
Where the paper says it

This broad coverage enables us to resolve the crossover from non-ohmic to ohmic transport, overlooked in earlier studies [7–10] that primarily focused on large cyclotron gaps and thus probed only the high–T0 regime. Our key finding is that QH breakdown is not governed by a single mechanism, but by a universal crossover between fielddriven VRH and heating-dominated transport, controlled solely by the localization energy kBT0.

Characterization of Transport Regimes

The effective electronic temperature Teff follows a power-law behavior Teff ∝ Uβ, where the exponent β reflects the underlying transport mechanism. The analysis shows that Teff scales approximately linearly with voltage beyond a certain threshold, consistent with the nonohmic VRH regime. p. 3

Where the paper says it

The resulting voltage dependence of Teff is shown in Fig. Close to the center of the cyclotron gaps (ν = 6, 10), Teff scales approximately linearly with voltage beyond a certain threshold, consistent with the nonohmic VRH regime.

Conversely, for smaller spin gaps (ν = 4, 8), a scaling closer to Teff ∝ U1/2 at large bias suggests Joule heating as the dominant mechanism. p. 3
Where the paper says it

Hence, the effective temperature is mapped onto the onset temperature of conductance. For the smaller spin gaps (ν = 4, 8), we observe a scaling closer to Teff ∝ U 1/2 at large bias, suggesting Joule heating as the dominant mechanism, while in the center of large gaps (at large T0), non-ohmic VRH prevails.

Quantifying the Crossover

The crossover from non-ohmic to ohmic regimes is analyzed by examining the bias dependence of the exponent β for intermediate hopping energies kBT0. The extracted exponent β increases monotonically from ≃ 0. p. 3

Where the paper says it

The extracted exponent β is plotted as a function of the VRH hopping energy kBT0 in Fig. β increases monotonically from ≃ 0.

4 in small gaps to ≃ 1 in large gaps, signaling a crossover from Joule-heating transport (β ≃ 0. p. 3
Where the paper says it

β increases monotonically from ≃ 0. 4 in small gaps to ≃ 1 in large gaps, signaling a crossover from Joule-heating transport (β ≃ 0.

5) to non-ohmic VRH (β ≃ 1). p. 0
Where the paper says it

We find that the conductance is consistently described by variable range hopping (VRH) and extract the hopping energies from both temperature- and field-driven measurements. Using VRH thermometry, we are able to distinguish between a cold and hot electron regime, which are dominated by non-ohmic VRH and Joule heating, respectively.

The crossover voltage Uc increases with T0, consistent with stronger localization requiring larger fields. p. 3
Where the paper says it

5 at high U, indicating a gradual transition between transport mechanisms. The crossover voltage Uc, defined where the slope changes, increases with T0, consistent with stronger localization requiring larger fields to reach the ohmic regime.

Robustness and Universality

The breakdown mechanism is shown to be robust against variations in magnetic field and carrier type. The relation between UBD and T0 is unchanged across different magnetic fields, confirming that the relevant energy scales are set by localization rather than absolute field strength. p. 9

Where the paper says it

Robustness against magnetic field and carrier type Finally, we analyze the robustness of the breakdown mechanism against variations in carrier type and magnetic field. Figure S8 shows that for ν = 6 the relation between UBD and T0 is unchanged across different magnetic fields, confirming that the relevant energy scales are set by localization rather than absolute field strength.

Furthermore, the VRH-based breakdown mechanism applies universally, independent of carrier type. p. 9
Where the paper says it

The scaling of UBD with T0, as well as the evolution of β, closely mirrors the behavior on the electron side. This symmetry demonstrates that the VRH-based breakdown mechanism applies universally, independent of carrier type.

Frequency Independence

The work confirms that breakdown is governed by intrinsic bulk localization physics rather than dynamical drive effects, as no measurable frequency dependence was found from DC to 10 GHz. The scaling behavior holds over nearly ten decades in frequency, demonstrating that breakdown is driven by electric-field–induced tunneling between localized states. p. 7

Where the paper says it

Despite such variations, the underlying breakdown mechanism is frequency independent. The scaling behavior holds over nearly ten decades in frequency, from DC to 10 GHz, demonstrating that breakdown is driven by electric-field–induced tunneling between localized states.

Scaling of Energy Scales

The scaling of transport parameters is strongly affected by the nature of the underlying gap. Specifically, cyclotron gaps (ν = 6, 10) follow the expected theoretical scaling T0 ∝ ν − νc23, while spin gaps (ν = 4, 8) display a weaker slope γ ≈ 1. p. 6

Where the paper says it

The cyclotron gaps (ν = 6, 10) follow the expected theoretical scaling T0 ∝ |ν − νc| 2. 3 , while the spin gaps (ν = 4, 8) display a weaker slope γ ≃ 1.

The universal relation UBD ∝ T03/2 is observed, independent of filling factor or excitation frequency. p. 7
Where the paper says it

Plotting UBD versus T0 on a loglog scale (see Fig. S3a) for DC and b) for RF) reveals a robust power-law relation UBD ∝ T 3/2 0 , independent of filling factor or excitation frequency.

Summary and Conclusion

Our experiments demonstrate that the breakdown of the QH regime in graphene is characterized by a systematic crossover from non-ohmic, field-driven VRH to ohmic, Joule–heating–dominated transport. The crossover voltage Uc scales solely with the hopping energy T0, identifying localization length ξ as the key parameter that controls the onset of dissipation. p. 4

Where the paper says it

Summary and conclusions – Our experiments demonstrate that the breakdown of the QH regime in graphene is characterized by a systematic crossover from non-ohmic, field-driven VRH to ohmic, Joule–heating–dominated transport. The crossover voltage Uc scales solely with the hopping energy T0, identifying localization length ξ as the key parameter that controls the onset of dissipation.

p. 4
Where the paper says it

Summary and conclusions – Our experiments demonstrate that the breakdown of the QH regime in graphene is characterized by a systematic crossover from non-ohmic, field-driven VRH to ohmic, Joule–heating–dominated transport. The crossover voltage Uc scales solely with the hopping energy T0, identifying localization length ξ as the key parameter that controls the onset of dissipation.

This unified picture explains why cyclotron gaps, with a very small minimal localization length, withstand higher bias fields than smaller gaps, where the localization length saturates due to overlapping Landau levels. p. 4
Where the paper says it

The crossover voltage Uc scales solely with the hopping energy T0, identifying localization length ξ as the key parameter that controls the onset of dissipation. This unified picture explains why cyclotron gaps, with a very small minimal localization length, withstand higher bias fields than smaller gaps, where the localization length saturates due to overlapping Landau levels [22].

p. 4
Where the paper says it

The crossover voltage Uc scales solely with the hopping energy T0, identifying localization length ξ as the key parameter that controls the onset of dissipation. This unified picture explains why cyclotron gaps, with a very small minimal localization length, withstand higher bias fields than smaller gaps, where the localization length saturates due to overlapping Landau levels [22].

It also further clarifies the role of heating across a wide range of energy scales. p. 4
Where the paper says it

This unified picture explains why cyclotron gaps, with a very small minimal localization length, withstand higher bias fields than smaller gaps, where the localization length saturates due to overlapping Landau levels [22]. It also further clarifies the role of heating across a wide range of energy scales.

p. 4
Where the paper says it

This unified picture explains why cyclotron gaps, with a very small minimal localization length, withstand higher bias fields than smaller gaps, where the localization length saturates due to overlapping Landau levels [22]. It also further clarifies the role of heating across a wide range of energy scales.

This work confirms low- and high-frequency breakdown as a sensitive probe of bulk conduction and localization in topological systems and opens a route to systematic studies of dissipation in quantum materials under high-frequency excitation. p. 4
Where the paper says it

In contrast to the quantum anomalous Hall effect [24], where frequency-dependent coupling of charge puddles dominates, we find no measurable frequency dependence from DC to 10 GHz, showing that breakdown is governed by intrinsic bulk localization physics rather than dynamical drive effects. This work confirms low- and high-frequency breakdown as a sensitive probe of bulk conduction and localization in topological systems and opens a route to systematic studies of dissipation in quantum materials under high-frequency excitation.

p. 4
Where the paper says it

In contrast to the quantum anomalous Hall effect [24], where frequency-dependent coupling of charge puddles dominates, we find no measurable frequency dependence from DC to 10 GHz, showing that breakdown is governed by intrinsic bulk localization physics rather than dynamical drive effects. This work confirms low- and high-frequency breakdown as a sensitive probe of bulk conduction and localization in topological systems and opens a route to systematic studies of dissipation in quantum materials under high-frequency excitation.

The supporting data and codes for this article are available from Zenodo. p. 4
Where the paper says it

This work confirms low- and high-frequency breakdown as a sensitive probe of bulk conduction and localization in topological systems and opens a route to systematic studies of dissipation in quantum materials under high-frequency excitation. The supporting data and codes for this article are available from Zenodo [35].

Fitting with Generalized VRH Law

The bias dependence of the conductance can be described within a generalized Efros–Shklovskii VRH framework. The current–voltage characteristics follow σ(U) = σ0 U2/α exp" - U0/U1/α≈, where U0 sets the breakdown field and α = 2/β reflects the transport regime. This form provides good phenomenological fits even across crossover regions. p. 6

Where the paper says it

Independent of whether transport is ohmic or non-ohmic, the current–voltage characteristics follow: σ(U) = σ0 U2/α exp" − U0 U 1/α# , (4) where U0 sets the breakdown field and α = 2/β reflects the transport regime. Strictly speaking, this form applies to a single regime (either cold or electron regime), but it provides good phenomenological fits even across crossover regions.

Scaling Behavior of Normalized Fit Parameter

The normalized parameters scale with the filling factor ν, showing that cyclotron gaps (ν = 6, 10) follow the expected theoretical scaling T0∝ ν − νc23, while spin gaps (ν = 4, 8) display a weaker slope γ ≈ 1. This deviation likely arises because the spin gaps are less well developed, with multiple Landau levels contributing to hopping transport. p. 6

Where the paper says it

3 , while the spin gaps (ν = 4, 8) display a weaker slope γ ≃ 1. This deviation likely arises because the spin gaps are less well developed, with multiple Landau levels contributing to hopping transport.

Comparison Between Thermally and Field-Driven VRH

The comparison between thermally and field-driven VRH shows a universal slope of approximately 1.5 as shown by the dashed lines with a slope of 1. p. 7

Where the paper says it

The log-log slope shows universally a slope of approximately 1. 5 as shown by the dashed lines with a slope of 1.

5, indicating a power law of UBD ∝ T3/20 in DC and RF. p. 7
Where the paper says it

5 as shown by the dashed lines with a slope of 1. 5, indicating a power law of UBD ∝ T 3/2 0 in DC and RF.

This universal relation highlights, in a different manner, the connection between thermally and field-driven transport in the VRH regime. p. 7
Where the paper says it

Notably, spin gaps (ν = 4, 8) show a slightly steeper slope, but the overall scaling holds. This universal relation highlights, in a different manner, the connection between thermally and field-driven transport in the VRH regime.

Frequency Dependence

While UBD appears to increase with frequency, this trend is not intrinsic but due to frequency-dependent transmission losses in the coaxial setup. Despite such variations, the underlying breakdown mechanism is frequency independent. p. 7

Where the paper says it

These are extrinsic, geometrydependent artifacts. Despite such variations, the underlying breakdown mechanism is frequency independent.

The scaling behavior holds over nearly ten decades in frequency, from DC to 10 GHz, demonstrating that breakdown is driven by electric-field–induced tunneling between localized states. p. 7
Where the paper says it

Despite such variations, the underlying breakdown mechanism is frequency independent. The scaling behavior holds over nearly ten decades in frequency, from DC to 10 GHz, demonstrating that breakdown is driven by electric-field–induced tunneling between localized states.

Extended Data for Bias Dependence

Figures S6a)–d) show Teff as a function of U, highlighting a crossover from linear scaling (β ≃ 1) to square-root scaling (β ≃ 1/2). This analysis confirms that the transport continuously evolves from non-ohmic to Jouleheating–dominated conduction with increasing bias voltage, with a threshold that increases with kBT0. p. 7

Where the paper says it

S6e)–h), revealing a systematic decrease of β with both increasing filling factor (x-axis) and bias voltage (color). This analysis confirms that the transport continuously evolves from non-ohmic to Jouleheating–dominated conduction with increasing bias voltage, with a threshold that increases with kBT0.

Estimate of Crossover Amplitude

The crossover voltage Uc is estimated by calculating the shift in Uc, while fixing all parameter but T0. The model predicts a crossover voltage Uc that increases systematically with T0, in good agreement with the experimental data. p. 8

Where the paper says it

We observe a crossing due to an onset of Te, which can be understood from the onset of bulk conductance, which leads to an onset of Joule power P ∝ σU2 . The model predicts a crossover voltage Uc that increases systematically with T0, in good agreement with the experimental data (Fig.

Magnetic Field Dependence

For ν = 6 the relation between UBD and T0 is unchanged across different magnetic fields, confirming that the relevant energy scales are set by localization rather than absolute field strength. The scaling of UBD with T0, as well as the evolution of β, closely mirrors the behavior on the electron side. p. 9

Where the paper says it

We also investigate hole-doped states at ν = −6 and ν = −10 (Fig. The scaling of UBD with T0, as well as the evolution of β, closely mirrors the behavior on the electron side.

p. 9
Where the paper says it

We also investigate hole-doped states at ν = −6 and ν = −10 (Fig. The scaling of UBD with T0, as well as the evolution of β, closely mirrors the behavior on the electron side.

Hole Doping

The scaling of UBD with T0, as well as the evolution of β, closely mirrors the behavior on the electron side. This symmetry demonstrates that the VRH-based breakdown mechanism applies universally, independent of carrier type. p. 9

Where the paper says it

The scaling of UBD with T0, as well as the evolution of β, closely mirrors the behavior on the electron side. This symmetry demonstrates that the VRH-based breakdown mechanism applies universally, independent of carrier type.

Robustness against Magnetic Field and Carrier Type

Figure S8 shows that for ν = 6 the relation between UBD and T0 is unchanged across different magnetic fields, confirming that the relevant energy scales are set by localization rather than absolute field strength. The scaling of UBD with T0, as well as the evolution of β, closely mirrors the behavior on the electron side.

Summary and Conclusions

Our experiments demonstrate that the breakdown of the QH regime in graphene is characterized by a systematic crossover from non-ohmic, field-driven VRH to ohmic, Joule–heating–dominated transport. The crossover voltage Uc scales solely with the hopping energy T0, identifying localization length ξ as the key parameter that controls the onset of dissipation. This unified picture explains why cyclotron gaps, with a very small minimal localization length, withstand higher bias fields than smaller gaps, where the localization length saturates due to overlapping Landau levels. It also further clarifies the role of heating across a wide range of energy scales. This work confirms low- and high-frequency breakdown as a sensitive probe of bulk conduction and localization in topological systems and opens a route to systematic studies of dissipation in quantum materials under high-frequency excitation.

Supporting Data and Codes

The supporting data and codes for this article are available from Zenodo. This work has been supported by Germany’s Excellence Strategy (Cluster of Excellence Matter and Light for Quantum Computing ML4Q, EXC 2004/1 - 390534769) and the DFG (SFB1238 Control and Dynamics of Quantum Materials, 277146847, projects A04, B07, and C02). p. 4

Where the paper says it

Shklovskii for his insights. p. 4

Where the paper says it

ACKNOWLEDGEMENTS We warmly thank B. Shklovskii for his insights.

This work has been supported by Germany’s Excellence Strategy (Cluster of Excellence Matter and Light for Quantum Computing ML4Q, EXC 2004/1 - 390534769) and the DFG (SFB1238 Control and Dynamics of Quantum Materials, 277146847, projects A04, B07, and C02).

p. 4
Where the paper says it

Shklovskii for his insights. This work has been supported by Germany’s Excellence Strategy (Cluster of Excellence Matter and Light for Quantum Computing ML4Q, EXC 2004/1 - 390534769) and the DFG (SFB1238 Control and Dynamics of Quantum Materials, 277146847, projects A04, B07, and C02).

It was also funded by the ERC (ERC-2018-STG QUAHQ), by the “Investissements d’Avenir” LabEx PALM (ANR10-LABX-0039-PALM), and by the Region Ile de France through the DIM QUANTIP. p. 4
Where the paper says it

This work has been supported by Germany’s Excellence Strategy (Cluster of Excellence Matter and Light for Quantum Computing ML4Q, EXC 2004/1 - 390534769) and the DFG (SFB1238 Control and Dynamics of Quantum Materials, 277146847, projects A04, B07, and C02). It was also funded by the ERC (ERC-2018-STG QUAHQ), by the “Investissements d’Avenir” LabEx PALM (ANR10-LABX-0039-PALM), and by the Region Ile de France through the DIM QUANTIP.

p. 4
Where the paper says it

This work has been supported by Germany’s Excellence Strategy (Cluster of Excellence Matter and Light for Quantum Computing ML4Q, EXC 2004/1 - 390534769) and the DFG (SFB1238 Control and Dynamics of Quantum Materials, 277146847, projects A04, B07, and C02). It was also funded by the ERC (ERC-2018-STG QUAHQ), by the “Investissements d’Avenir” LabEx PALM (ANR10-LABX-0039-PALM), and by the Region Ile de France through the DIM QUANTIP.

O.M. acknowledges funding from the ANR (ANR-23-CE47-0002 CRAQUANT). p. 4
Where the paper says it

It was also funded by the ERC (ERC-2018-STG QUAHQ), by the “Investissements d’Avenir” LabEx PALM (ANR10-LABX-0039-PALM), and by the Region Ile de France through the DIM QUANTIP. acknowledges funding from the ANR (ANR-23-CE47-0002 CRAQUANT).

p. 4
Where the paper says it

It was also funded by the ERC (ERC-2018-STG QUAHQ), by the “Investissements d’Avenir” LabEx PALM (ANR10-LABX-0039-PALM), and by the Region Ile de France through the DIM QUANTIP. acknowledges funding from the ANR (ANR-23-CE47-0002 CRAQUANT).

K.W. and T.T. acknowledge support from the JSPS KAKENHI (Grant Numbers 21H05233 and 23H02052), the CREST (JPMJCR24A5), JST and World Premier International Research Center Initiative (WPI), MEXT, Japan. p. 4
Where the paper says it

acknowledges funding from the ANR (ANR-23-CE47-0002 CRAQUANT). acknowledge support from the JSPS KAKENHI (Grant Numbers 21H05233 and 23H02052) , the CREST (JPMJCR24A5), JST and World Premier International Research Center Initiative (WPI), MEXT, Japan.

p. 4
Where the paper says it

acknowledges funding from the ANR (ANR-23-CE47-0002 CRAQUANT). acknowledge support from the JSPS KAKENHI (Grant Numbers 21H05233 and 23H02052) , the CREST (JPMJCR24A5), JST and World Premier International Research Center Initiative (WPI), MEXT, Japan.

ACKNOWLEDGEMENTS

We warmly thank B. Shklovskii for his insights. This work has been supported by Germany’s Excellence Strategy (Cluster of Excellence Matter and Light for Quantum Computing ML4Q, EXC 2004/1 - 390534769) and the DFG (SFB1238 Control and Dynamics of Quantum Materials, 277146847, projects A04, B07, and C02). It was also funded by the ERC (ERC-2018-STG QUAHQ), by the “Investissements d’Avenir” LabEx PALM (ANR10-LABX-0039-PALM), and by the Region Ile de France through the DIM QUANTIP. O.M. acknowledges funding from the ANR (ANR-23-CE47-0002 CRAQUANT). K.W. and T.T. acknowledge support from the JSPS KAKENHI (Grant Numbers 21H05233 and 23H02052), the CREST (JPMJCR24A5), JST and World Premier International Research Center Initiative (WPI), MEXT, Japan.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Bias dependent transport regime identification: The improved AI system can accurately determine if a graphene breakdown event is governed by non-ohmic field-driven variable range hopping or ohmic Joule heating by analyzing the power law exponent beta derived from sliding-window fits of Teff proportional to U beta.

  2. Crossover voltage prediction: The system can predict the crossover voltage Uc based on the hopping energy T0, as this value scales solely with the hopping energy T0, identifying localization length xi as the key parameter that controls the onset of dissipation.

  3. Universal scaling law application: The AI can apply a universal power-law relation UBD proportional to T to T0 independent of filling factor or excitation frequency, which is independent of filling factor or excitation frequency and shows a robust power-law relation UBD proportional to T 3/2.

  4. Gap characteristic differentiation: The system can differentiate between cyclotron gaps and spin gaps by observing the scaling behavior of hopping energy T0, noting that T0 decreases from the center of each gap nuc toward its edges and that T0 is consistently larger for the cyclotron gaps (nu = 6, 10) than for the spin gaps (nu = 4, 8).

  5. Robustness assessment: The AI can assess the robustness of the breakdown mechanism by confirming that the relation between UBD and T0 is unchanged across different magnetic fields, indicating that the relevant energy scales are set by localization rather than absolute field strength.

Abstract

Graphene, through the coexistence of large cyclotron gaps and small spin and valley gaps, offers the possibility to study the breakdown of the quantum Hall effect across a wide range of energy scales. In this work, we investigate the breakdown of the QHE in high-mobility graphene Corbino devices under broadband excitation ranging from DC up to 10 GHz. We find that the conductance is consistently described by variable range hopping (VRH) and extract the hopping energies from both temperature and field-driven measurements. Using VRH thermometry, we are able to distinguish between a cold and hot electron regime, which are dominated by non-ohmic VRH and Joule heating, respectively. Our results demonstrate that breakdown in the quantum Hall regime of graphene is governed by a crossover from non-ohmic, field-driven VRH to ohmic, Joule-heating-dominated transport.

Sources

Related papers