Non-ohmic to ohmic crossover in the breakdown of the quantum Hall states in graphene under broadband excitations
summary
The gist
Graphene's quantum Hall effect breakdown exhibits a universal crossover from non-ohmic to ohmic transport governed by localization energy scales.
In short
The study investigates how graphene's quantum Hall effect breaks down under broadband excitation, finding a universal crossover from non-ohmic, field-driven transport to ohmic, Joule-heating-dominated transport. This transition is controlled by localization energy scales rather than absolute field strength, revealing that dissipation is governed by bulk conduction physics and frequency independence.
Key concepts
- Quantum Hall Effect Breakdown
- This refers to the point where the quantum Hall regime in graphene ceases to behave as expected. The breakdown occurs because the system transitions from a highly quantized, non-ohmic state driven by electric fields to a dissipative, ohmic state where energy is dissipated through heating.
- Non-ohmic vs. Ohmic Transport
- Non-ohmic transport is characterized by voltage and current relationships that are not simple linear proportionality. Ohmic transport means the current scales linearly with the applied voltage, typical of simple resistive materials. The paper shows a crossover between these two regimes in graphene's breakdown.
- Localization Energy Scale ($k_BT_0$)
- This scale, related to localization energy and temperature, is the single controlling factor for the breakdown crossover. It dictates whether transport is dominated by field-driven mechanisms or Joule heating. This parameter determines the onset of dissipation in the quantum Hall regime.
Terminology used across episodes
This episode discusses
- Non-ohmic to ohmic crossover in the breakdown of the quantum Hall states in graphene under broadband excitations · Paper Radio
- Non-universal localization transition in the quantum Hall effect probed through broken-symmetry states of graphene
- Breakdown of the quantum anomalous Hall effect under microwave drives · Paper Radio
- Visualizing the breakdown of the quantum anomalous Hall effect
The paper
Non-ohmic to ohmic crossover in the breakdown of the quantum Hall states in graphene under broadband excitations · Read on arXiv
Torsten Réoper, Aifei Zhang, Kenji Watanabe, Takashi Taniguchi, Olivier Maillet, Ércois D. Parmentier, Érwann Bocquillon
II. Physikalisches Institut, Universität zu Kཫln · Universitǩ Paris-Saclay · Research Center for Electronic and Optical Materials, National Institute for Materials Science · Research Center for Materials Nanoarchitectonics, National Institute for Materials Science · Laboratoire de Physique de l’Ecole Normale Supérieure, Universitǩ PSL
Graphene, through the coexistence of large cyclotron gaps and small spin and valley gaps, offers the possibility to study the breakdown of the quantum Hall effect across a wide range of energy scales. In this work, we investigate the breakdown of the QHE in high-mobility graphene Corbino devices under broadband excitation ranging from DC up to 10 GHz. We find that the conductance is consistently described by variable range hopping (VRH) and extract the hopping energies from both temperature and field-driven measurements. Using VRH thermometry, we are able to distinguish between a cold and hot electron regime, which are dominated by non-ohmic VRH and Joule heating, respectively. Our results demonstrate that breakdown in the quantum Hall regime of graphene is governed by a crossover from non-ohmic, field-driven VRH to ohmic, Joule-heating-dominated transport.
DOI: 10.1103/5kkx-rcdh
Transcript
Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.
Kai: We're looking at the paper: "Non-ohmic to ohmic crossover in the breakdown of the quantum Hall states in graphene under broadband excitations".
Mira: Here's the gist of the paper. Graphene's quantum Hall effect breakdown exhibits a universal crossover from non-ohmic to ohmic transport governed by localization energy scales.
Kai: Core Findings on Breakdown Mechanisms The study demonstrates that the breakdown in the quantum Hall regime of graphene is governed by a crossover from non-ohmic, field-driven VRH to ohmic, Joule-heating–dominated transport.
Mira: This crossover is controlled solely by the localization energy kBT0.
Kai: The key finding is that QH breakdown is not governed by a single mechanism, but by a universal crossover between fielddriven VRH and heating-dominated transport.
Paper summary: Kai: So we just finished looking at how graphene's quantum Hall breakdown switches between non-ohmic and ohmic transport under broadband excitation.
Mira: Yeah, this paper by the authors is really focused on that crossover point, right? It’s about how field-driven variable range hopping transitions into heating dominated transport.
Lev: From my side, I’m thinking about what that means for the actual hardware we try to build; it sets a limit on how much voltage we can safely push before dissipation takes over.
Kai: Exactly, and the paper shows this crossover voltage scales with the localization energy scale, T0, which is essentially tied to how localized the carriers are.
Mira: And that’s significant because it means we can predict when things will start to fail based on those intrinsic material properties rather than just brute force field strength.
Lev: I worry about the numbers; if T0 is too small, that crossover voltage Uc shoots up really fast, making our error correction overhead way higher.
Kai: But the authors are also pointing out that this mechanism is robust, it works for both electron and hole doping in graphene across different magnetic fields.
Mira: That universality is what’s compelling; it suggests the fundamental physics of localization dictates the breakdown regardless of which carrier you start with.
Lev: So, if we can map out these T0 dependencies, maybe we can design better materials that inherently resist this kind of transition to ohmic behavior when we need high fidelity.
Kai: Yeah, and they confirm that even at very high frequencies, the underlying physics driving this isn't changing much; it’s still tied to those localized states tunneling between them.
Mira: It really puts the focus on the bulk conduction properties of graphene rather than just surface effects or some external drive we put on it.
Lev: So, if we can understand this crossover point better, maybe we get a clearer picture of how much noise and heat will actually land on our quantum devices in these regimes.
Conclusion: Kai: So we're wrapping up this deep dive into graphene’s quantum Hall states and their breakdown under high excitation, focusing on that non-ohmic to ohmic crossover point in this paper by the authors "Non-ohmic to ohmic crossover in the breakdown of the quantum Hall states in graphene under broadband excitations."
Mira: Basically, what they've shown is that when you look at how these quantum states fail under a strong electric field, it doesn't just follow one simple rule. It switches between two different modes: one driven by the field itself, and another where heat from the current dominates everything.
Lev: That switch is governed by this localization energy scale, T0, which tells us how tightly bound the carriers are in the material.
Kai: Right, so instead of just guessing when things will get messy based on how strong you push it, this paper gives us a specific way to predict that crossover voltage Uc using that T0 term.
Mira: And they show this is super universal; it holds true whether you are looking at electron carriers or hole carriers in graphene, and even across different magnetic fields.
Lev: That’s what’s important for real hardware; if the physical mechanism stays the same regardless of those parameters, then we have a much more stable way to manage dissipation.
Kai: They also proved that this isn't just a high-frequency thing; it holds true even when you test it up to ten gigahertz, confirming that the core physics is about these localized states tunneling between each other.
Mira: So the big picture here is that understanding how this transition happens—from field-driven hopping to heating dominated transport—is actually the key to designing stable quantum devices in graphene at high operating voltages.
Lev: Because if we can predict exactly where that dissipation kicks in based on these material properties, we can build better error correction schemes for those systems.
Kai: That sets up a great next step because now that we understand the physics of the breakdown itself, we need to look at how this translates into actual noise and heat when you start running full circuits.
More episodes
- 2603.23036-Zero-Uncertainty States Relative to Observable Algebras
- 2603.29754-Coherent and dissipative energy transfer in driven open quantum systems: a driven quantum master equation approach
- 2604.01157-Thermal Entanglement and Out-of-Equilibrium Thermodynamics in 1D Bose Gases
- 2604.06410-Directional and correlated optical emission from a waveguide-engineered molecule with local control
- 2604.07214-Quantum Gibbs sampling through the detectability lemma
- 2604.13165-Finite-size Entanglement Certification via Third-Order Local Randomized Measurements
- 2604.18542-Dissipative Preparation of Correlated Quantum States in Dipolar Rydberg Arrays
- 2605.00096-Scalable spin-nematic squeezing in multi-level dipole-interacting Rydberg atom arrays
- 2605.02565-Sample-Based Quantum Diagonalization with Amplitude Amplification
- 2605.20111-Mechanism of wavefunction collapse in measurements of separated quantum subsystems