Numerical Study of Jet-Like Outwash from Multi-Rotor eVTOLs and Strategies for Flow Mitigation

arXiv:2509.15559 · physics.flu-dyn · Submitted 2025-09-19 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Numerical Study of Jet-Like Outwash from Multi-Rotor eVTOLs and Strategies for Flow Mitigation".

Mira: Here's the gist of the paper. Numerical Study on Jet-Like Outwash Induced by Multi-Rotor eVTOLs and Engineering Approaches for Outwash Mitigation is a comprehensive computational investigation of outwash phenomena generated by electric vertical takeoff and landing (eVTOL) aircraft, with particular emphasis on how rotor geometry and alignment shape hazardous airflow patterns at vertiports.

Kai: This study presents a comprehensive computational investigation of outwash phenomena generated by electric vertical takeoff and landing (eVTOL) aircraft, with particular emphasis on how rotor geometry and alignment shape hazardous airflow patterns at vertiports Results demonstrate that propeller count and inter-propeller spacing are primary determinants of outwash intensity, orientation, propagation range, and boundary-layer structure Targeted engineering solutions—such as modular blast deflectors aligned with predicted outwash directions—are shown to reduce required vertiport safety areas by up to 82% without compromising operational safety.

Mira: Characterization of Outwash Mechanisms The study systematically characterizes jet-like outwash across a range of multi-rotor configurations using nondimensional Reynoldsaveraged Navier–Stokes (RANS) simulations with the k–ω SST turbulence model implemented in OpenFOAM.

Kai: Results demonstrate that propeller count and inter-propeller spacing are primary determinants of outwash intensity, orientation, propagation range, and boundary-layer structure.

Title and authors: Kai: So we're looking at this paper today, "Numerical Study of Jet-Like Outwash from Multi-Rotor eVTOLs and Strategies for Flow Mitigation." It's by Yen-Chen Chen and Chih-Che Chueh. They’re tackling the actual airflow issues that happen when these electric vertical takeoff and landing aircraft land or take off near a vertiport.

Mira: Yeah, the title tells you exactly what it's about: they are numerically studying how jet-like outwash is caused by multi-rotor eVTOLs and exploring engineering approaches to reduce that flow hazard. It sounds like they’re moving beyond just theoretical worries and doing some serious computational work on the physics.

Lev: I'm curious about the authors, because this paper uses a lot of high-fidelity CFD simulations with OpenFOAM. That’s a pretty intensive tool for modeling fluid dynamics at that level.

Kai: Right, Lev, and that’s where it gets interesting. The authors use the k-omega SST turbulence model to characterize outwash across various multi-rotor setups using nondimensional Reynolds averaged Navier–Stokes simulations. It sounds like they are trying to get a very detailed picture of what’s actually happening in those complex airflow patterns.

Mira: And what they find is that the propeller count and the interpropeller spacing are the main things determining how intense, where it goes, and how far this outwash jet travels. They aren't just looking at one scenario; they're testing a whole range of propeller configurations.

Lev: So, if I were building real hardware to run these simulations, I’d immediately think about the computational cost of running those high-fidelity RANS simulations across that many different propeller counts. How much overhead does that actually land on the system?

Kai: That's a fair question, Lev. But for what they are doing here, testing seven representative propeller configurations—ranging from a single rotor up to twelve propellers distributed along the wingspan—seems necessary to see those trends clearly.

Mira: And when you look at the results, they show that smaller interpropeller distances produce markedly stronger jet-like outwash. The orientation of this mean outwash velocity tends to align predominantly with the directions of the interpropeller gaps, specifically at theta equals ninety degrees and two seventy degrees.

Lev: So, if we're looking at real hardware, what does that alignment tell us about where the primary risk is concentrated on a physical landing pad? Is it always directly between rotors?

Kai: It suggests that the most intense jets are concentrated right in those gaps, which feeds into the next part of their study: how this outwash behaves when it hits the ground. They found that upon impingement with the ground, these downward flows get redirected sideways, and the ground effect intensifies this redirection.

Mira: That redirection is what confines momentum along the surface and accelerates coherent radial jets between those propellers, which really builds on that initial jet-like outwash they observed in their simulations. It’s a coupled effect of several aerodynamic phenomena working together.

Title and authors: Lev: That sounds like a lot of coupled physics to manage in real life. If we were designing a landing pad, we’d have to consider the ground effect interaction dynamically, not just statically.

Kai: Exactly. And they also looked at the propagation range of this hazardous outwash, which they measure as the normalized propagation range where the flow velocity is greater than zero point eight. This gave them some critical information about how far this hazard actually spreads away from the aircraft.

Mira: The results here are pretty telling for vertiport safety because they show that existing standards for vertiport safety areas might be inadequate for eVTOL operations. They are demonstrating that those standard exclusion-zone models don't quite capture the dynamic behavior of these outwash jets

one–six: <ref:2509.15559#pg2>.

Lev: That’s a big implication. If the existing standards are based on simpler assumptions, they might be way too conservative or, conversely, not conservative enough for what these complex rotor interactions create.

Kai: And that leads right into their engineering suggestions. They aren't just pointing out the problem; they are proposing solutions like modular blast deflectors aligned with the predicted outwash directions. These devices aim to reduce the required vertiport safety areas by up to eighty-two percent without compromising operational safety, as they show on their figures.

Mira: That reduction figure is substantial. It means that with smart design, we could potentially shrink the footprint needed for these facilities significantly while still keeping them safe according to FAA EB105a requirements two thousand two hundred twenty-three <ref:2509.15559#pg3>.

Lev: Eighty-two percent reduction is significant for infrastructure planning. But I wonder if those modular barriers are truly effective under real-world turbulence and varying wind conditions, or if the simulation assumptions hold up perfectly in practice.

Kai: Well, the simulations show that for a representative power-lift eVTOL with two propellers and an interpropeller distance of two normalized units, installing these deflectors at the FATO boundary confines the hazardous outwash near the ground level below zero point five.

Mira: That confinement is happening within just two point five times the takeoff and landing distance, which directly satisfies those FAA EB105a safety requirements. They even tested different deflector heights, finding that an inclined deflector with a height of zero point two achieves that eighty-two percent reduction in required area two thousand two hundred twenty-three <ref:2509.15559#pg3>.

Lev: So the design optimization isn't just about making the rotors better; it’s also about designing the infrastructure to adapt to the known physics of the outwash. That moves us toward a system where design and safety are integrated from the start.

Kai: And they touched on how different propeller counts affect this. For power-lift designs with more propellers, say twelve, they saw that while the near-ground maximum outwash velocity actually reduces, you get a thicker hazardous outwash layer instead of just a thinner one.

Title and authors: Mira: That vertical stacking effect is something to watch carefully in high-count designs. It means the flow doesn't just become a tighter jet; it gets broader vertically, which complicates things for ground safety assessments.

Lev: If the flow gets thicker vertically, that affects the boundary layer thickness, which we saw in their analysis—as interpropeller spacing increases, both the maximum mean radial velocity and that hazardous boundary layer thickness decrease. It’s a trade-off we have to manage in real hardware implementation.

Kai: The study concludes by summarizing that jet-like outwash is an intrinsic characteristic of these multi-rotor eVTOLs under standard interpropeller spacing, and for high propeller counts, the outwash streams merge into a collective longitudinal jet with reduced peak velocity but a vertically thickened boundary layer.

Mira: So the main point is that small interpropeller distances and fewer propellers generate intense jets whose propagation ranges exceed what current safety envelopes define. The paper shows that modular blast deflectors are an effective way to substantially reduce vertiport footprints by up to eighty-two percent with minimal structural additions <ref:2509.15559#pg3>.

Lev: What this means for the future is that we need automated design tools, something that uses these predicted outwash intensities and orientations to generate geometry-matched devices automatically. That moves us from post-hoc analysis to proactive design integration.

Kai: It gives planners a tool to predict hazards before they even start construction, based on the specific rotor geometry and spacing configuration chosen for the eVTOL design itself.

Mira: And it sets up a path for regulatory bodies to revise those standards because this work provides empirical data showing that existing vertiport safety areas are not fully adequate for these aircraft <ref:2509.15559#pg2>.

Lev: I think the biggest challenge they point out is figuring out the minimum effective deflector height across all these different geometrical designs, because that nonlinearity in how the deflector works with the jet-like outwash is something we still need to model more precisely for real hardware validation.

Kai: So, to wrap up on this paper, "Numerical Study of Jet-Like Outwash from Multi-Rotor eVTOLs and Strategies for Flow Mitigation," it’s a detailed look at how rotor geometry shapes hazardous airflow at vertiports and shows that engineering solutions like modular deflectors can shrink the required safety area by eighty-two percent.

Mira: It’s a lot of computational work, but it gives us concrete numbers about the intensity, orientation, and propagation range of these outwash jets.

Lev: And for me, it highlights the need for better automated design tools that use these simulation results to create geometry-matched mitigation devices that can be implemented on real hardware.

Kai: That’s right. It’s a framework for aligning eVTOL aircraft design with vertiport infrastructure and urban safety requirements by using these detailed flow dynamics.

The paper's summary: Kai: So we're looking at what they actually found in the study by Yen-Chen Chen and Chih-Che Chueh, "Numerical Study of Jet-Like Outwash from Multi-Rotor eVTOLs and Strategies for Flow Mitigation." They’ve really mapped out how those jet streams work.

Mira: Yeah, it boils down to this: they confirmed that the basic idea is right—that when you have these multi-rotor electric vertical takeoff and landing aircraft under normal spacing, there's an inherent jet-like outwash because of how those rotors interact.

Lev: So, what did they use to prove that interaction? They ran nondimensional Reynolds averaged Navier–Stokes simulations using the k-omega SST turbulence model in OpenFOAM. That’s a pretty high-fidelity way to look at fluid dynamics.

Kai: Right, Lev, and that simulation approach is crucial because it lets them see the whole picture of the airflow patterns across different configurations. They found that propeller count and interpropeller spacing are the primary factors determining how intense this outwash is and where it points.

Mira: And they pinpointed specific directions for that mean outwash velocity, showing it concentrates around ninety degrees and two seventy degrees relative to those gaps between the rotors. That tells you exactly where the most dangerous airflow is going to be at a vertiport.

Lev: From an engineering standpoint, that directional information is key. If you know where the jet is pointing, you can design a countermeasure precisely rather than just slapping on some random barrier.

Kai: Exactly. And they also looked at how far this hazardous outwash actually travels away from the aircraft—they called that normalized propagation range where the flow velocity is greater than zero point eight.

Mira: That propagation range is way bigger than what those standard safety zones currently require, which means existing regulations are definitely not built for these aircraft.

Lev: So, what does that mean for someone building a landing pad? It means the safety buffer you design isn't just about the aircraft itself; it has to account for this propagating hazard zone.

Kai: And that’s where the engineering mitigation comes in. They showed that by installing modular blast deflectors aligned with those predicted outwash directions, they can cut down the required vertiport safety area by up to eighty-two percent without causing any operational safety issues.

Mira: Eighty-two percent is a massive reduction for infrastructure planning because it shows you can shrink the footprint substantially just by engineering the surrounding space correctly.

Lev: But I want to ask, how much of that reduction comes from the deflector design itself versus just moving the boundary further out? The paper suggests it’s about geometric alignment.

Kai: They show that an inclined deflector with a height of zero point two gives you that eighty-two percent reduction, while a flat one at zero point zero still cuts the area by fifty-eight percent.

Mira: It shows that the geometry matters, which is what we expected from their earlier findings about how interpropeller distance affects the structure of this boundary layer.

Lev: So, the conclusion is that you have to design both the aircraft and the infrastructure together, using simulation results to guide where you place those physical barriers.

Kai: And for future work, they point out a challenge: figuring out that minimum effective deflector height because different rotor designs create different nonlinear interactions with the blast deflectors.

Mira: That's a good flag because it means we can't just use one standard solution; we need a design tool that predicts the exact geometry needed for any given eVTOL setup.

Lev: So the next step isn't just building better aircraft, but building better simulation tools to help planners and manufacturers do this alignment proactively.

Kai: Right, so this paper gives us a clear path: use fluid dynamics to predict the jet, design a deflector for that specific jet, and shrink the required safety area by over eighty percent.

The paper's improvements: Kai: So we're moving on to what they suggest for improvements in this study, "Numerical Study of Jet-Like Outwash from Multi-Rotor eVTOLs and Strategies for Flow Mitigation." It’s not just about finding the problem, it's about how to solve it better.

Mira: Exactly. The authors point out that the current analysis is heavily based on specific propeller configurations, but they suggest a need for design optimization driven by these simulation insights.

Lev: I see that they want to move toward a system where aircraft design inherently minimizes hazardous outwash effects based on those propeller count and interpropeller spacing variables we saw earlier.

Kai: That’s the first big idea: using the simulation data to actually optimize the eVTOL design itself so it doesn't create as much of a hazard in the first place.

Mira: And they also suggest integrating high-fidelity CFD simulations into vertiport planning, so planners and manufacturers can predict those outwash zones before they even start physical construction.

Lev: That takes us from analyzing data to proactive design. It means you use the simulation results to guide the geometry choices for a real system, which is where the overhead really lands on real hardware development.

Kai: And then there’s another suggestion: developing automated blast deflector design tools that take those predicted outwash intensities and orientations and automatically generate geometry-matched devices.

Mira: That tool would be able to reduce the required vertiport safety areas by up to eighty-two percent based on those specific predictions, which is what we discussed earlier.

Lev: If you can automate the design of these mitigation devices using the simulation data, it drastically lowers the engineering cost and speeds up deployment for real hardware.

Kai: It moves us toward a system where infrastructure and aircraft design are integrated from the start, instead of having to retrofit solutions later.

Mira: They also touched on assessing that vertical stacking effect in high propeller count designs, recognizing that parallel jet streams tend to get thicker vertically rather than just getting tighter horizontally.

Lev: That vertical thickening is a tricky factor for real hardware modeling because it changes the boundary layer thickness in a way we need to account for in our error-correction systems.

Kai: So, the future work they suggest is really focused on finding that minimum effective deflector height across all those different geometrical designs, because that nonlinearity means you can't use one simple rule for every setup.

Mira: It’s a limitation they admit—that the relationship between the deflector shape and the jet interaction isn't always straightforward, so more detailed modeling is needed.

Lev: That nonlinearity is what makes it hard to build robust real-world systems because you can't just pick a height off a chart; you have to model that specific interaction.

Kai: So, the paper gives us a roadmap: optimize the aircraft design using flow physics, automate the mitigation device design based on those predictions, and refine our modeling of how those devices actually interact in practice.

Conclusion: Kai: So to wrap up on "Numerical Study of Jet-Like Outwash from Multi-Rotor eVTOLs and Strategies for Flow Mitigation," they’ve really shown that the physics of multi-rotor interaction creates a distinct jet stream hazard at vertiports.

Mira: They proved that propeller count and spacing are the core drivers of this outwash, with specific jets pointing in certain directions around ninety degrees and two seventy degrees.

Lev: And they quantified how far this hazardous outwash travels, showing it exceeds what current FAA safety standards typically allow.

Kai: So the main implication for us is that existing vertiport safety areas are inadequate for eVTOL operations under standard spacing, which is pretty concerning if we want to build safe urban air mobility infrastructure.

Mira: But the real utility of this paper lies in the engineering solutions they propose, showing that modular blast deflectors can reduce required safety areas by eighty-two percent with minimal structural changes.

Lev: That eighty-two percent reduction is significant because it means we don't need to build massive exclusion zones just to manage these airflow dynamics; we can use smart geometry instead.

Kai: And the future direction they flag is that figuring out that minimum effective deflector height, because different rotor designs interact with those barriers differently.

Mira: That nonlinearity is the key challenge for us, because it means we need better simulation tools that can predict the exact geometry needed before a physical device is ever built.

Lev: I agree with Mira; modeling that interaction accurately for real hardware validation will be a major hurdle in moving this from simulation to deployment.

Kai: It’s a big step toward aligning aircraft design with infrastructure requirements using these detailed flow dynamics.

Yen-Chen Chen, Chih-Che Chueh

National Cheng Kung University · Peniel Infrastructure LTD. · Worcester Polytechnic Institute

physics.flu-dyn

Submitted: 2025-09-19

Updated: 2026-11-03

Comments: 29 pages, 11 figures, 1 table

License: http://creativecommons.org/licenses/by-nc-nd/4.0/

Importance score: 82/100

The gist: Numerical Study on Jet-Like Outwash Induced by Multi-Rotor eVTOLs and Engineering Approaches for Outwash Mitigation is a comprehensive computational investigation of outwash phenomena generated by…

Key concepts

Jet-like Outwash
This refers to the hazardous, jet-like airflow generated between the gaps of adjacent rotors on an eVTOL. It occurs due to the interaction of rotor downwashes and ground effect, creating coherent radial jets that can pose a safety risk at vertiports.
Inter-propeller Spacing (L̃)
This is the distance between individual propellers on the eVTOL. The study found that smaller spacing leads to significantly stronger jet-like outwash and more intense hazardous airflow, which directly impacts safety requirements.
Blast Deflectors
These are engineered structures designed to be installed at a vertiport boundary. The research demonstrates that strategically placed blast deflectors can confine the dangerous outwash near the ground, significantly reducing the required safety area without compromising operational safety.

Terminology

Summary

Numerical Study on Jet-Like Outwash Induced by Multi-Rotor eVTOLs and Engineering Approaches for Outwash Mitigation is a comprehensive computational investigation of outwash phenomena generated by electric vertical takeoff and landing (eVTOL) aircraft, with particular emphasis on how rotor geometry and alignment shape hazardous airflow patterns at vertiports. p. 0

Where the paper says it

tw Keywords: Multi-rotor eVTOL; Outwash; Vertiport; Urban Air Mobility; Blast Deflector Abstract This study presents a comprehensive computational investigation of outwash phenomena generated by electric vertical takeoff and landing (eVTOL) aircraft, with particular emphasis on how rotor geometry and alignment shape hazardous airflow patterns at vertiports. Using nondimensional Reynoldsaveraged Navier–Stokes (RANS) simulations with the k–ω SST turbulence model implemented in OpenFOAM, the research systematically characterizes jet-like outwash across a range of multi-rotor configurations.

This study presents a comprehensive computational investigation of outwash phenomena generated by electric vertical takeoff and landing (eVTOL) aircraft, with particular emphasis on how rotor geometry and alignment shape hazardous airflow patterns at vertiports Results demonstrate that propeller count and inter-propeller spacing are primary determinants of outwash intensity, orientation, propagation range, and boundary-layer structure Targeted engineering solutions—such as modular blast deflectors aligned with predicted outwash directions—are shown to reduce required vertiport safety areas by up to 82% without compromising operational safety. p. 0
Where the paper says it

tw Keywords: Multi-rotor eVTOL; Outwash; Vertiport; Urban Air Mobility; Blast Deflector Abstract This study presents a comprehensive computational investigation of outwash phenomena generated by electric vertical takeoff and landing (eVTOL) aircraft, with particular emphasis on how rotor geometry and alignment shape hazardous airflow patterns at vertiports. Using nondimensional Reynoldsaveraged Navier–Stokes (RANS) simulations with the k–ω SST turbulence model implemented in OpenFOAM, the research systematically characterizes jet-like outwash across a range of multi-rotor configurations.

Characterization of Outwash Mechanisms

The study systematically characterizes jet-like outwash across a range of multi-rotor configurations using nondimensional Reynoldsaveraged Navier–Stokes (RANS) simulations with the k–ω SST turbulence model implemented in OpenFOAM. Results demonstrate that propeller count and inter-propeller spacing are primary determinants of outwash intensity, orientation, propagation range, and boundary-layer structure. p. 0

Where the paper says it

Using nondimensional Reynoldsaveraged Navier–Stokes (RANS) simulations with the k–ω SST turbulence model implemented in OpenFOAM, the research systematically characterizes jet-like outwash across a range of multi-rotor configurations. Results demonstrate that propeller count and inter-propeller spacing are primary determinants of outwash intensity, orientation, propagation range, and boundary-layer structure.

The jet-like outwash observed between the propeller gaps of multirotor eVTOLs arises from the coupled effects of several aerodynamic phenomena: the mutual interaction of adjacent rotor downwashes, the amplification of ground effect, and the generation and evolution of vortex structures. p. 9
Where the paper says it

2; and (d) corresponding pressure gradients along the 𝑥˜ − 𝑥˜ and 𝑦˜ − 𝑦˜ sections from (c). The jet-like outwash observed between the propeller gaps of multirotor eVTOLs arises from the coupled effects of several aerodynamic phenomena: the mutual interaction of adjacent rotor downwashes, the amplification of ground effect, and the generation and evolution of vortex structures.

Specifically, upon impingement with the ground, these downward flows are redirected laterally; the ground effect intensifies this redirection, confining momentum along the surface and accelerating coherent radial jets between propellers. p. 9
Where the paper says it

Each rotor produces its own downwash, and when multiple rotors are placed in close proximity, their flows interact and merge, creating concentrated high-velocity jets in the inter-propeller regions [14,21]. Upon impingement with the ground, these downward flows are redirected laterally; the ground effect intensifies this redirection, confining momentum along the surface and accelerating coherent radial jets between propellers [13,27,28].

Influence of Geometric Parameters on Hazard Severity

The analysis systematically examines seven representative propeller configurations, spanning a range of propeller counts (P) including a single-rotor helicopter (P = 1; Fig. 1a), a quadcopter (P = 4; Fig. p. 5

Where the paper says it

The analysis spans a range of propeller counts (𝑃), including a single-rotor helicopter (𝑃 = 1; Fig. 1a), a quadcopter (𝑃 = 4; Fig.

1b), and several power-lift eVTOL concepts with P = 2,6,8, and 12 propellers distributed along the wingspan (x-direction). p. 5
Where the paper says it

1c), and several power-lift eVTOL concepts with 𝑃 = 2,6,8, and 12 propellers (Fig. 1d–g) distributed along the wingspan ( 𝑥 -direction).

The analysis reveals that smaller inter-propeller distances produce markedly stronger jet-like outwash. p. 0
Where the paper says it

For power-lift eVTOLs, low propeller counts combined with narrow spacing produce highly directional, intensified jet-like outwash with propagation ranges far exceeding current FAA EB105a safety standards. Conversely, higher propeller counts and larger spacings reduce peak velocities and propagation distances, enabling safer and more compact vertiport layouts.

Orientational analysis further reveals that the mean outwash velocity aligns predominantly with the directions of the inter-propeller gaps, concentrated at θ˜ = 90∘ and 270∘. p. 7
Where the paper says it

A closer comparison of velocity profiles reveals that longitudinal outwash (𝑥˜ = 0) is substantially stronger than wingspan-directed outwash (𝑦˜ = 0) in the eVTOL case, with the propagation range in the longitudinal direction greatly exceeding that of the conventional helicopter. These findings highlight that multi-rotor eVTOL outwash dynamics are highly sensitive to propeller geometric alignment, particularly the spacing and configuration of inter-propeller gaps.

As inter-propeller spacing decreases, the magnitude of these jets intensifies; by contrast, at L̃ = 20 (Fig. p. 8
Where the paper says it

3a), and the pressure gradients along the two sections follow similar trends (Fig. By contrast, the power-lift eVTOL exhibits a distinct pressure peak at the inter-propeller gap, driven by the convergence of the two downwash jets upon ground interaction (Fig.

4c), the jet-like structure effectively vanishes. p. 0
Where the paper says it

Using nondimensional Reynoldsaveraged Navier–Stokes (RANS) simulations with the k–ω SST turbulence model implemented in OpenFOAM, the research systematically characterizes jet-like outwash across a range of multi-rotor configurations. Results demonstrate that propeller count and inter-propeller spacing are primary determinants of outwash intensity, orientation, propagation range, and boundary-layer structure.

Propagation and Boundary Layer Dynamics

The normalized propagation range of hazardous outwash (l̃ U˜>0.8) is shown as a function of nondimensional inter-propeller distance (L̃) for different eVTOL propeller configurations. p. 7

Where the paper says it

3, orientation-dependent outwash patterns are analyzed across multiple eVTOL configurations, illustrating how collective jet streams align, merge, and propagate. 4 quantifies the hazardous propagation range of outwash as a function of nondimensional inter-propeller distance (𝐿̃), highlighting safety risks that extend beyond current vertiport standards.

The results carry critical implications for vertiport safety and regulatory frameworks, demonstrating that existing standards for vertiport safety areas are inadequate for eVTOL operations. p. 1
Where the paper says it

In response, updated regulatory frameworks such as FAA Engineering Brief (EB) 105A [16] now mandate the designation of downwash/outwash caution areas (DCAs) for vertiports whenever ground-level wind velocities exceed prescribed safety limits (34. Without effective mitigation measures, these requirements could drastically expand vertiport land footprints, threatening the practicality and scalability of urban air mobility unless novel outwash suppression strategies or infrastructure adaptations are implemented.

Furthermore, the analysis of the ground-level boundary layer structure shows that as L̃ increases, both the maximum mean radial velocity ũrmax and the hazardous boundary-layer thickness (h̃) decrease. p. 7
Where the paper says it

4 quantifies the hazardous propagation range of outwash as a function of nondimensional inter-propeller distance (𝐿̃), highlighting safety risks that extend beyond current vertiport standards. 5 investigates the boundary-layer structure of outwash at ground level, providing critical insights for the design of mitigation devices.

For power-lift eVTOLs, an increase in propeller count reduces the near-ground maximum outwash velocity but produces a thicker hazardous outwash layer. p. 0
Where the paper says it

Results demonstrate that propeller count and inter-propeller spacing are primary determinants of outwash intensity, orientation, propagation range, and boundary-layer structure. For power-lift eVTOLs, low propeller counts combined with narrow spacing produce highly directional, intensified jet-like outwash with propagation ranges far exceeding current FAA EB105a safety standards.

Engineering Mitigation Strategies

The study evaluates a representative power-lift eVTOL with P = 2 and L̃ = 2, demonstrating that two blast deflectors installed at the FATO boundary can confine the hazardous outwash near the ground (z˜≤ 0.5) within 2. p. 0

Where the paper says it

These findings establish a direct link between aircraft design, regulatory compliance, and infrastructure optimization, offering practical pathways for safe and scalable urban air mobility. The study also provides a foundation for future research on optimal mitigation device geometries and system-level integration of eVTOL operations within urban environments.

5 times the TLOF length, fully satisfying FAA EB105a safety requirements. p. 5
Where the paper says it

Following FAA Engineering Brief No. 105a (EB105a) [16], the TLOF diameter is defined by the rotor diameter of the eVTOL (𝑅𝐷), corresponding to the smallest circle that fully encompasses all propellers, and is calculated as: 𝑅𝐷˜ = 𝑅𝐷/𝐷 = { 1; 𝑃 = 1 (𝑎) √2𝐿˜ + 1; 𝑃 = 4 (𝑏) 2𝐿˜ + 1 ; 𝑃 = 6 (𝑐) 𝐿˜ + 1; 𝑃 = 2 (𝑑) √4𝐿˜2 + 𝑊˜ 2 + 1; 𝑃 = 6 (𝑒) √9𝐿˜2 + 𝑊˜ 2 + 1; 𝑃 = 8 (𝑓) √25𝐿˜2 + 𝑊˜ 2 + 1; 𝑃 = 12 (𝑔) , (6) where the diameter of FATO is defined as twice 𝑅𝐷, and thus twice the size of TLOF [16].

The optimal inclined deflector (H̃ = 0. p. 0
Where the paper says it

These findings establish a direct link between aircraft design, regulatory compliance, and infrastructure optimization, offering practical pathways for safe and scalable urban air mobility. The study also provides a foundation for future research on optimal mitigation device geometries and system-level integration of eVTOL operations within urban environments.

2) achieves up to an 82% reduction in required area, while even the least effective case—the flat deflector at H̃ = 0.05—still provides a 58% reduction. p. 2
Where the paper says it

3 advanced conceptual eVTOL designs by optimizing rotor placement in distributed propulsion, showing through CFD that staggered rotor layouts reduce some wake instabilities yet still generate outwash beyond regulatory assumptions. High-fidelity multi-rotor simulations by Ventura Diaz and Yoon [21], employing actuator disc and line methods, confirmed that vortex interactions and jet mergers evolve dynamically with ground effect, rendering simple exclusion-zone models inadequate.

These results clearly demonstrate that carefully engineered outwash mitigation devices can substantially reduce vertiport footprint with minimal structural additions

Conclusions and Future Directions

The principal findings summarize that jet-like outwash is an intrinsic characteristic of multi-rotor eVTOLs under standard inter-propeller spacing, originating from the pressure maximum forming between adjacent rotors. Power-lift eVTOLs with small interpropeller distances and fewer propellers generate intense, highly directional outwash jets, with propagation ranges far exceeding the safety envelopes defined by FAA EB105a standards. p. 0

Where the paper says it

For power-lift eVTOLs, low propeller counts combined with narrow spacing produce highly directional, intensified jet-like outwash with propagation ranges far exceeding current FAA EB105a safety standards. Conversely, higher propeller counts and larger spacings reduce peak velocities and propagation distances, enabling safer and more compact vertiport layouts.

For high-propeller-count power-lift designs, the outwash streams merge into a collective longitudinal jet characterized by reduced peak velocity but a vertically thickened boundary layer. p. 0
Where the paper says it

Conversely, higher propeller counts and larger spacings reduce peak velocities and propagation distances, enabling safer and more compact vertiport layouts. High-propeller-count designs further exhibit vertically stratified and thickened outwash boundary layers, requiring tailored mitigation strategies.

Engineering-based mitigation and infrastructure optimization show that modular blast deflectors can shrink required vertiport safety areas by up to 82% with minimal structural intervention. p. 0
Where the paper says it

Targeted engineering solutions—such as modular blast deflectors aligned with predicted outwash directions—are shown to reduce required vertiport safety areas by up to 82% without compromising operational safety. These findings establish a direct link between aircraft design, regulatory compliance, and infrastructure optimization, offering practical pathways for safe and scalable urban air mobility.

Future research should focus on the determination of the minimum effective deflector height across different geometrical designs, as this nonlinearity highlights the complex aerodynamic interactions between jet-like outwash and blast deflector geometries. p. 0
Where the paper says it

tw Keywords: Multi-rotor eVTOL; Outwash; Vertiport; Urban Air Mobility; Blast Deflector Abstract This study presents a comprehensive computational investigation of outwash phenomena generated by electric vertical takeoff and landing (eVTOL) aircraft, with particular emphasis on how rotor geometry and alignment shape hazardous airflow patterns at vertiports. Using nondimensional Reynoldsaveraged Navier–Stokes (RANS) simulations with the k–ω SST turbulence model implemented in OpenFOAM, the research systematically characterizes jet-like outwash across a range of multi-rotor configurations.

The study provides a framework for aligning eVTOL aircraft design with vertiport infrastructure and urban safety requirements. p. 4
Where the paper says it

This hybrid capability has made it a widely adopted standard in engineering practice, particularly for problems characterized by strong pressure gradients, complex boundary layers, and moderate separation—conditions commonly encountered in aircraft and rotorcraft aerodynamics (Younoussi and Ettaouil [33]). In the context of eVTOL operations, the steady-state 𝑘–𝜔 SST model provides a practical and industry-recognized framework for assessing the average effects of turbulent outwash on vertiport surfaces and aircraft structures, yielding insights into surface forces, safety buffer zones, and regulatory compliance requirements (Qiao et al.

Nomenclature

The nomenclature section defines various parameters used in the nondimensional framework, such as D propeller diameter, characteristic length scale for nondimensionalization. It also defines the normalized inter-propeller distance L̃ normalized inter-propeller distance, L/D. p. 7

Where the paper says it

3, orientation-dependent outwash patterns are analyzed across multiple eVTOL configurations, illustrating how collective jet streams align, merge, and propagate. 4 quantifies the hazardous propagation range of outwash as a function of nondimensional inter-propeller distance (𝐿̃), highlighting safety risks that extend beyond current vertiport standards.

The nomenclature section includes definitions for various dimensionless quantities like k̃ dimensionless turbulence kinetic energy, k/U2. p. 3
Where the paper says it

1a), while the characteristic velocity is taken as the rotor disk flow velocity 𝑈, computed as 𝑈 = √ (𝑇/𝐴) 2𝜌 , (1) where 𝑇 denotes the thrust generated by a single propeller, 𝐴 represents the cross-sectional area of the propeller outlet, and the ratio 𝑇⁄𝐴 corresponds to the disk loading, a key parameter that characterizes the aerodynamic performance of the propeller system. This nondimensional framework enables consistent scaling and meaningful comparison across propellers of varying sizes and operating conditions by expressing the governing dynamics through dimensionless groups.

The nomenclature section also defines the nondimensional spatial coordinate x˜ nondimensional wingspan direction of power-lift eVTOL. p. 5
Where the paper says it

1c), and several power-lift eVTOL concepts with 𝑃 = 2,6,8, and 12 propellers (Fig. 1d–g) distributed along the wingspan ( 𝑥 -direction).

References

The paper cites numerous sources to support its claims, including works on Downwash and Outwash Surveys by the FAA, and high-fidelity CFD simulations by Ventura Diaz and Yoon. Key references include Brown, Do eVTOL Aircraft create an inherently more problematic Downwash than Conventional Helicopters? p. 1

Where the paper says it

Consequently, effective outwash mitigation is not merely a design optimization, but a prerequisite for ensuring the safe, practical, and socially sustainable integration of eVTOL systems into modern transportation networks. Regulatory agencies, including the FAA and the UK Civil Aviation Authority (CAA), increasingly acknowledge that outwash generated by eVTOL aircraft is substantially more intense, anisotropic, and spatially extensive than that of conventional single-rotor helicopters [13–16].

p. 1
Where the paper says it

Consequently, effective outwash mitigation is not merely a design optimization, but a prerequisite for ensuring the safe, practical, and socially sustainable integration of eVTOL systems into modern transportation networks. Regulatory agencies, including the FAA and the UK Civil Aviation Authority (CAA), increasingly acknowledge that outwash generated by eVTOL aircraft is substantially more intense, anisotropic, and spatially extensive than that of conventional single-rotor helicopters [13–16].

p. 1
Where the paper says it

Consequently, effective outwash mitigation is not merely a design optimization, but a prerequisite for ensuring the safe, practical, and socially sustainable integration of eVTOL systems into modern transportation networks. Regulatory agencies, including the FAA and the UK Civil Aviation Authority (CAA), increasingly acknowledge that outwash generated by eVTOL aircraft is substantially more intense, anisotropic, and spatially extensive than that of conventional single-rotor helicopters [13–16].

, Sophrodyne Aerospace Technical Report (2023), and the FAA Engineering Brief No. p. 1
Where the paper says it

Both field experiments and high-fidelity CFD simulations demonstrate that the geometry, number, and arrangement of eVTOL propellers critically determine the strength, directionality, and spatial extent of outwash flows—effects that are especially pronounced in densely packed multi-rotor architectures envisioned for advanced air mobility systems [17–19]. In response, updated regulatory frameworks such as FAA Engineering Brief (EB) 105A [16] now mandate the designation of downwash/outwash caution areas (DCAs) for vertiports whenever ground-level wind velocities exceed prescribed safety limits (34.

105A EB105a Vertiport Design, Supplemental Guidance to AC 150/5390-2D Heliport Design, 2024

Acknowledgments

This work was partially supported by the Headquarters of University Advancement at National Cheng Kung University, funded by the Ministry of Education, Taiwan, and by the National Science and Technology Council (NSTC), Taiwan.

Conflicts of Interest

The authors state that they do not have any identifiable financial interests or personal relationships that could have influenced the reported work.

CRediT Authorship Contribution Statement

Yen-Chen Chen: Writing – review & editing, Writing – original draft, Project administration, Methodology, Investigation, Formal analysis, Conceptualization, Visualization, Validation, Software Data curation. Chih-Che Chueh: Writing – review & editing Conceptualization Supervision Resources. p. 0

Where the paper says it

1 Numerical Study on Jet-Like Outwash Induced by Multi-Rotor eVTOLs and Engineering Approaches for Outwash Mitigation Author: Yen-Chen Chen1,2,3*, Chih-Che Chueh1** 1Department of Aeronautics and Astronautics, National Cheng Kung University, Tainan 701, Taiwan 2Peniel Infrastructure LTD. , 254 Chapman Road, Suite 208, 23642, Newark, Delaware 19702, USA 3Department of Physics, Worcester Polytechnic Institute, Worcester, Massachusetts 01609, USA Corresponding: * info@penielinfrastructure.

Data Availability

The data that support the findings of this study are available from the corresponding author upon reasonable request.

Abbreviations

The abbreviations section defines terms such as AAM advanced air mobility, CAP civil aviation authority (UK), CFD computational fluid dynamics, EB105A FAA engineering brief 105A (vertiport safety guidelines), and eVTOL electric vertical takeoff and landing aircraft.

The paper cites numerous sources to support its claims, including works on Downwash and Outwash Surveys by the FAA, and high-fidelity CFD simulations by Ventura Diaz and Yoon. Key references include Brown, Do eVTOL Aircraft create an inherently more problematic Downwash than Conventional Helicopters?, Sophrodyne Aerospace Technical Report (2023)

The paper cites numerous sources to support its claims, including works on Downwash and Outwash Surveys by the FAA, and high-fidelity CFD simulations by Ventura Diaz and Yoon. Key references include Brown, Do eVTOL Aircraft create an inherently more problematic Downwash than Conventional Helicopters?

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improve eVTOL design optimization by using simulation-driven insights to minimize hazardous outwash effects based on propeller count and inter-propeller spacing, as propeller count and inter-propeller spacing are primary determinants of outwash intensity, orientation, propagation range, and boundary-layer structure. This allows for the development of propulsion systems that inherently reduce the need for massive safety buffers.

  2. Enhance vertiport planning by integrating high fidelity CFD simulations to predict hazardous outwash zones across various propeller configurations before physical construction begins. This addresses the gap where planners and manufacturers may overlook critical hazards arising from specific rotor geometries and spacing configurations.

  3. Develop automated blast deflector design tools that use predicted outwash intensity, orientation, and propagation range to generate geometry-matched devices. This system can reduce required vertiport safety areas by up to 82% without compromising operational safety.

  4. Implement a framework for regulatory revision by providing empirical data demonstrating that existing standards for vertiport safety areas are inadequate for eVTOL operations. This provides the necessary evidence to revise FAA EB105a requirements based on actual outwash dynamics rather than helicopter models.

  5. Create a system to assess the vertical stacking effect of outwash flows in high-propeller-count designs, recognizing that "parallel jet-like outwash streams generated by high-propellercount eVTOLs, with propellers aligned along the wingspan, tend to vertically “stack,” creating a resultant flow that is slower than a single concentrated jet yet characterized by greater vertical extent."

Abstract

This study presents a comprehensive computational investigation of outwash phenomena generated by electric vertical takeoff and landing (eVTOL) aircraft, with particular emphasis on how rotor geometry and alignment shape hazardous airflow patterns at vertiports. Using nondimensional Reynolds-averaged Navier-Stokes (RANS) simulations with the k-omega SST turbulence model implemented in OpenFOAM, the research systematically characterizes jet-like outwash across a range of multi-rotor configurations. Results demonstrate that propeller count and inter-propeller spacing are primary determinants of outwash intensity, orientation, propagation range, and boundary-layer structure. For power-lift eVTOLs, low propeller counts combined with narrow spacing produce highly directional, intensified jet-like outwash with propagation ranges far exceeding current FAA EB105a safety standards. Conversely, higher propeller counts and larger spacings reduce peak velocities and propagation distances, enabling safer and more compact vertiport layouts. High-propeller-count designs further exhibit vertically stratified and thickened outwash boundary layers, requiring tailored mitigation strategies. Targeted engineering solutions-such as modular blast deflectors aligned with predicted outwash directions-are shown to reduce required vertiport safety areas by up to 82% without compromising operational safety. These findings establish a direct link between aircraft design, regulatory compliance, and infrastructure optimization, offering practical pathways for safe and scalable urban air mobility. The study also provides a foundation for future research on optimal mitigation device geometries and system-level integration of eVTOL operations within urban environments.

Related papers