Reconstructing High-Fidelity Light Yield Maps for Surface LArTPCs Using Crossing Cosmic Muons

summary

The gist

Photon detection systems in liquid argon time projection chambers provide prompt scintillation light information that can improve triggering, timing, calorimetry…

In short

This work reconstructs detailed 3D light yield maps for surface liquid argon time projection chambers (LArTPCs) by analyzing cosmic muons that pass through them. By treating muon paths as linear systems, the method uses nonnegative least squares with an L2 smoothness penalty to find the most likely light yields. This technique recovers the true spatial structure of a known reference map and is robust against detector changes.

Key concepts

Voxelized 3D Light Yield Maps
This refers to creating a detailed, three-dimensional grid (voxels) across the LArTPC volume. Each voxel represents a small volume of argon where the detected light yield (the amount of scintillation light produced per unit volume) is measured. The goal is to reconstruct how much light was produced in every single point within this 3D structure.
Crossing Cosmic Muons
High-energy cosmic muons are used as probes. When a muon passes through the detector, it creates a track that intersects many voxels. The path length of the muon through each voxel is converted into an estimated energy deposition, which helps form a mathematical system linking the unknown light yields to the total detected signal.
Nonnegative Least Squares with L2 Smoothness Penalty
This is a mathematical technique used to solve for the unknown light yields. Nonnegative least squares ensures that all calculated light yield values are physically realistic (i.e., they cannot be negative). The L2 smoothness penalty adds a constraint that encourages neighboring voxel light yield values to be similar, which helps stabilize the reconstruction and reduce noise.
Visibility-Based Truth Reference
This is the 'ground truth' map used for validation. It is a highly accurate map of the expected light yields calculated independently using known detector geometry and physics. The reconstructed maps are compared against this reference to measure how accurately the method can reproduce the true spatial distribution of light production.

Terminology used across episodes

This episode discusses

The paper

Reconstructing High-Fidelity Light Yield Maps for Surface LArTPCs Using Crossing Cosmic Muons · Read on arXiv

Stony Brook University of New York State System Stony Brook University Department of Physics Indiana University Bloomington Department of Physics Instituto Tecnológico de Aeronáutica São José dos Campos Universidade Estadual de Campinas Campinas/SP University of Texas at Austin UT Austin Texas

Photon detection systems in liquid argon time projection chambers provide prompt scintillation light information that can improve triggering, timing, calorimetry, and interaction reconstruction. These applications require an understanding of the spatial dependence of the detected light yield (LY), which is not adequately described by a single detector-wide average. We present a method for reconstructing voxelized 3D light yield maps in surface LArTPCs using crossing cosmic muons. For each selected muon, the path length through every crossed voxel is converted to deposited energy using a minimum ionizing particle approximation, producing a linear system relating the unknown voxel light yields to the total detected photon signal. The resulting inverse problem is solved using nonnegative least squares, with an additional L 2 smoothness penalty used to stabilize weakly constrained voxel values. The method is studied in simulation using the ProtoDUNE-VD detector geometry and photon detection system. Reconstructed maps recover the dominant spatial structure of a visibility-based truth reference and respond as expected to changes in the photon detector configuration. Smoothness regularization reduces zero-valued voxels and localized fluctuations while leaving the detector-average light yield approximately unchanged at the selected regularization strengths. The voxel-wise RMSE relative to the truth reference is reduced by approximately 44% for the regularized reconstruction.

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "Reconstructing High-Fidelity Light Yield Maps for Surface LArTPCs Using Crossing Cosmic Muons".

Mira: Here's the gist of the paper. Photon detection systems in liquid argon time projection chambers provide prompt scintillation light information that can improve triggering, timing, calorimetry, and interaction reconstruction The method presents a way to reconstruct voxelized 3D light yield maps in surface LArTPCs using crossing cosmic muons Reconstructed maps recover the dominant spatial structure of a visibility-based truth reference and respond as expected to changes in the photon detector configuration The technique involves using high energy cosmic muon events to form a linear system relating unknown voxel light yields to the total detected photon signal For each selected muon, the path length through every crossed voxel is converted to deposited energy using a minimum ionizing particle approximation, producing a linear system relating the unknown voxel light yields to the total detected photon signal This system is solved using nonnegative least squares with an additional L2 smoothness penalty used to stabilize weakly constrained voxel values The reconstruction uses a straight line crossing muon approach where the trajectory of each muon through the detector must be known Data Preparation and Modeling The volume can be discretized into an array of voxels, with a larger number of voxels corresponding to a higher system resolution The energy deposited in each voxel can be calculated by multiplying the minimum ionizing particle (MIP) energy loss in liquid argon, 2.1 MeV/cm, by the distance the muon traverses within that voxel The linear system is created from the voxel path lengths (converted to deposited energy) and total photon counts, as shown in equation (2.1) An unconstrained least squares solution can therefore return negative light yield values, which are nonphysical, so the reconstruction was formulated as a nonnegative least squares problem Regularization and Solver Comparison An L2 smoothness regularization is used to penalize large differences between neighboring voxel light yield values The regularized nonnegative least squares problem is written as equation (2.4) The comparison of the solving methods in figure 15 shows strong voxel-level agreement between the two reconstructions Both solvers produce nearly identical reconstructed light yield maps, with only small residual differences visible after subtracting the solutions Validation and Performance The primary validation of the reconstruction method is a comparison between the light yield map inferred from crossing muons and the truth reference map obtained from the visibility-based calculation The smoothness regularization reduces the voxel-level RMSE by approximately 44% The effect of regularization is more apparent in a voxel-by-voxel comparison than in the detector volume mean The root mean square error (RMSE) can be obtained from the mean and standard deviation of the residual distribution according to equation (4.

Title and authors: Kai: This paper, "Reconstructing High-Fidelity Light Yield Maps for Surface LArTPCs Using Crossing Cosmic Muons," is by Heindel and his team at Stony Brook University, along with collaborators from Antananarivo, Indiana University Bloomington, and the Instituto Tecnológico de Aeronáutica in Brazil.

Mira: It’s interesting to see how they connect this light yield reconstruction to real-world applications like improving triggering and timing in these large detectors.

Lev: I wonder if the setup described is feasible for what we're building on real hardware, especially with the resolution they're aiming for.

The paper's summary: Kai: They summarize it by saying that they create a method to reconstruct voxelized three-dimensional light yield maps in surface LArTPCs using crossing cosmic muons.

Mira: The core idea is that for every muon, the path length through each voxel translates into deposited energy using an approximation based on minimum ionizing particle loss in liquid argon.

Lev: And they form a linear system by relating those unknown voxel light yields to the total detected photon signal from that muon event.

Kai: They then solve this system using non-negative least squares with an L two smoothness penalty to stabilize the results when some voxels have weak constraints.

The paper's improvements: Mira: The authors highlight a few key improvements, specifically focusing on how their reconstruction recovers the dominant spatial structure of a visibility-based truth reference map.

Kai: They also show that this method responds as expected when you change the configuration of the photon detector setup, which is important for testing and validation.

Lev: That response to configuration changes is critical; it means the reconstruction isn't just fitting noise, it actually captures the physical structure of what's happening.

Mira: Furthermore, they show that this method can reduce voxel-wise root mean square error by about forty-four percent when using the L two smoothness regularization compared to an unregularized solution.

Conclusion: Kai: To wrap up, these findings suggest a robust way to get better light yield maps in surface LArTPCs by leveraging crossing cosmic muons and solving the resulting linear system with non-negative least squares and smoothness.

Mira: The main implication is that this reconstruction method recovers the dominant spatial structure from a truth reference, which is good for understanding how detectors perform under different conditions.

Lev: From an engineering standpoint, reducing that error by forty-four percent at the voxel level sounds like it significantly cleans up the data before you even get to the final physics analysis step.

Kai: And they showed it works well in simulation using a ProtoDUNE-VD geometry, which gives us confidence in its general applicability.

Mira: So, this paper on "Reconstructing High-Fidelity Light Yield Maps for Surface LArTPCs Using Crossing Cosmic Muons" offers a concrete technique to map the internal structure of these detectors using external cosmic rays.

More episodes

← Home