RadMaps: A Geospatial Framework for Simultaneously Modelling Capacity and Geographic Constraints on Radiotherapy Access
summary
The gist
RadMaps presents an open-source geospatial framework that simultaneously models capacity and geographic constraints on radiotherapy access at any spatial scale This tool is valuable because it…
In short
RadMaps is an open-source geospatial framework that models radiotherapy access by simultaneously considering capacity limitations and geographic constraints across various spatial scales. It combines population density, cancer incidence, and facility inventories to calculate a combined metric showing how both factors reduce effective access. This reveals critical spatial mismatches missed by looking at capacity or geography alone.
Key concepts
- H3 hexagonal grid
- This is the specific coordinate system used by RadMaps for spatial analysis. It divides the Earth into uniform hexagons, allowing researchers to analyze radiotherapy access at different resolutions, from large regional areas down to very small local neighborhoods.
- Demand and Access Modelling
- This process calculates how many people need radiotherapy based on cancer incidence and utilization rates. It then apports this demand onto specific geographic areas (hexagons) to determine the local demand per area, which is essential for comparing it against available treatment capacity in that location.
- Capacity-only metric (AC), Geography-only metric (AG), and Combined metric (ARM)
- These are three different ways to measure access. AC measures access based only on facility capacity; AG measures access based only on geographic distance. ARM is the crucial combined metric that accounts for both constraints at the same time, showing the true level of effective access.
- TravelTime API and Decay Functions
- This component calculates travel times between locations using a specific API. It uses configurable functions like uniform or step decay to model how travel time changes based on distance, helping to accurately estimate how far patients can realistically reach a facility.
Terminology used across episodes
This episode discusses
- RadMaps: A Geospatial Framework for Simultaneously Modelling Capacity and Geographic Constraints on Radiotherapy Access · Paper Radio
The paper
RadMaps: A Geospatial Framework for Simultaneously Modelling Capacity and Geographic Constraints on Radiotherapy Access · Read on arXiv
Laurence Wroea, Archie Brownb, Sophia Martinb, Alika Hob, Steinar Stapnesa
University of Oxford · University of Oslo
Access to radiotherapy is constrained by two compounding factors: insufficient machine capacity to meet patient demand and geographic distance from treatment facilities. Existing analyses address these factors separately, in turn constraining the insights available to advocates, planners and policymakers. This paper presents RadMaps, an open-source geospatial framework that simultaneously models capacity and geographic constraints on radiotherapy access at any spatial scale. RadMaps operates on Uber's H3 hexagonal grid and integrates population density data with GLOBOCAN 2024 annual cancer incidence estimates and the IAEA DIRAC facility inventory. Radiotherapy demand is estimated using cancer site-specific radiotherapy utilisation rates, and geographic access is modelled via configurable decay functions (step, exponential, Gaussian, or power law) of distance or driving time. A capped three-step floating catchment area (3SFCA) method allocates demand to facilities subject to both capacity and geographic constraints, producing a localised access metric for every H3 hexagon. Globally, RadMaps estimates that installed capacity could meet 68.5% of radiotherapy demand, and 73.0% of demand is within geographic reach of a facility (2 h driving time with Gaussian decay, H3 Resolution-5), both comparable with published estimates. When both constraints apply, only 60.0% is met, leaving 3.7 million patients per year untreated. Countries are also grouped into one of four access profiles: strong access, capacity constrained, geography constrained, and doubly constrained. RadMaps provides a flexible, open-source framework for analysing, visualising and identifying radiotherapy access gaps at regional to global scales, with applications in advocacy, infrastructure planning, and policy prioritisation. Its modular framework is also extensible to other spatial access modelling applications.
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: We're looking at the paper: "RadMaps: A Geospatial Framework for Simultaneously Modelling Capacity and Geographic Constraints on Radiotherapy Access".
Mira: Here's the gist of the paper. RadMaps presents an open-source geospatial framework that simultaneously models capacity and geographic constraints on radiotherapy access at any spatial scale This tool is important because it captures the compounding effect of both capacity and geographic constraints to significantly reduce effective access Framework Description RadMaps operates on Uber’s H3 hexagonal grid and integrates population density data with national cancer incidence estimates and radiotherapy facility inventories The framework supports resolutions from Resolution3 (average cell area of 12 400 km2) down to Resolution-7 (5.16 km2) Data sources include Kontur Global Population Density, GLOBOCAN 2022 for cancer incidence estimates, and the IAEA DIRAC database for radiotherapy facilities Travel times are integrated via the TravelTime API using configurable decay functions like uniform, step, or Weibull Demand and Access Modelling Radiotherapy demand is calculated as D = X i λi I i, where I i is the incidence for cancer site i and λi is the radiotherapy utilisation (RTU) rate Demand is apportioned to individual hexagons to establish a local demand per hexagon Dh in proportion to their share of the total population Three metrics are calculated: a capacity-only metric AC, a geography-only metric AG, and the RadMaps combined metric ARM that accounts for both constraints simultaneously Key Findings from Analysis The global analysis at H3 Resolution-3 with a 200 km step-function threshold computes a capacity-only access of 70 %, a geography-only access of 91 %, and a combined radiotherapy access of 60 % High-resolution analyses of six countries demonstrate the tool’s ability to localise access deficits at sub-national scale and reveal distinct access profiles: capacity-limited (United Kingdom), geographically limited (Oman), and doubly-constrained (India and Nigeria) National Contextual Insights The national analyses show that Australia has sufficient capacity to meet its radiotherapy demand in full, while the United States possesses a substantial overall capacity that exceeds demand by more than 70 % India and Nigeria represent doubly-constrained profiles where both absolute capacity and geographical distribution are lacking The combined RadMaps metric ARM = 60 % in the global analysis is significantly lower than either standalone metric, capturing a critical spatial mismatch Limitations and Assumptions The paper notes several assumptions that must be considered when interpreting results, including uniform cancer incidence which distributes cancer incidence uniformly across the population All radiotherapy demand is treated as equivalent, whereas in practice the specific radiotherapy modality and type can vary The greedy nearest-first allocation algorithm assumes that each facility serves its nearest patients first, which may overestimate access in settings where referral patterns diverge significantly from geographic proximity Interpretation should be treated as modelled proxies rather than empirical measures of realised access RadMaps demonstrates the value of simultaneously modelling capacity and geographic constraints on radiotherapy access to produce a combined metric that reveals access deficits not captured by either constraint alone The modular framework is freely available and readily extensible, providing a foundation for larger-scale analyses of radiotherapy access and broader access modelling across diverse geographic and socioeconomic contexts The tool is actively being distributed to healthcare professionals and radiotherapy planners to evaluate its practical utility
Paper summary: Kai: So we're looking at this paper called "RadMaps: A Geospatial Framework for Simultaneously Modelling Capacity and Geographic Constraints on Radiotherapy Access." It’s essentially an open-source framework that tries to model where radiotherapy access is limited by both how many machines there are and how far people have to travel.
Mira: Exactly. The core idea is that existing analyses often look at capacity or geography separately, which means they miss the actual effect when both things hit at once, which significantly reduces effective access. This framework aims to capture that compounding effect across any spatial scale you choose.
Lev: From an engineering standpoint, it’s interesting because it tries to build a system that handles these two different types of constraints simultaneously within one model structure. It suggests a way to look at the problem holistically instead of treating capacity and distance as separate variables.
Kai: The paper uses Uber's H3 hexagonal grid for its spatial modeling, which is a very specific way of dividing the world into manageable units, and it integrates population density data with national cancer incidence estimates and inventories of radiotherapy facilities.
Mira: And it supports resolutions ranging from Resolution-three which has an average cell area of twelve thousand four hundred square kilometers, all the way down to Resolution-seven which is five point one six square kilometers. That gives them a lot of flexibility for different levels of analysis.
Lev: The demand estimation part seems key here too. They calculate radiotherapy demand using cancersite-specific radiotherapy utilisation rates and then apportion that demand across the hexagons based on the share of the total population in that area to get a local demand per hexagon, denoted Dh.
Kai: And then they calculate three specific metrics: a capacity-only metric AC, a geography-only metric AG, and this combined RadMaps metric ARM which accounts for both constraints at the same time. That's what sets it apart from previous work.
Mira: The paper’s main claim is that this combined ARM metric shows a much more realistic picture of access than either AC or AG alone because it captures the compounding effect of those two limitations, significantly reducing effective access in areas where both are constraining.
Lev: When we look at the results they show, they ran a global analysis at H3 Resolution-three with a two hundred km step-function threshold and found a capacity-only access of seventy percent, a geography-only access of ninety-one percent, and the combined radiotherapy access of only sixty percent.
Kai: That drop from ninety one to sixty because they are modeling the interaction between capacity and distance really highlights how much that spatial mismatch matters for real planning decisions. They also looked at six countries with high resolution analyses to see how this works on a smaller scale, showing distinct profiles like capacity-limited in the United Kingdom or geographically limited in Oman.
Mira: That’s a crucial finding because it shows the tool isn't just theoretical; it can pinpoint specific access deficits at sub-national scales and reveal different patterns based on geography and infrastructure availability. India and Nigeria showed up as doubly-constrained profiles where both capacity and distribution were lacking simultaneously.
Lev: The national context insights they pulled from analyzing individual countries are pretty telling, like Australia having enough capacity to meet its demand in full, or the United States having a total capacity that exceeds demand by more than seventy percent.
Kai: But for India and Nigeria, it’s about both absolute capacity and geographical distribution being lacking at the same time. The combined RadMaps metric ARM of sixty percent in the global analysis is much lower than either of those standalone metrics, which confirms that spatial mismatch is a critical factor here.
Mira: It really shows that when you look at these two constraints together, the resulting metric gives you a much clearer picture of what's actually happening on the ground compared to just looking at capacity or distance in isolation.
Lev: The paper does note some limitations, which I think is important for us to keep in mind. They mention assuming uniform cancer incidence which distributes cancer incidence uniformly across the population, and they treat all radiotherapy demand as equivalent when in reality the specific modality can vary a lot.
Kai: And another assumption they make is that their greedy nearest-first allocation algorithm assumes each facility serves its nearest patients first, which might actually overestimate access in settings where referral patterns diverge significantly from simple geographic proximity.
Mira: So, while RadMaps provides a valuable framework for visualizing and identifying these gaps at regional or global scales, we have to remember that the results are modeled proxies rather than direct empirical measures of what access looks like in reality.
Lev: The conclusion is that this paper demonstrates the value of modeling capacity and geographic constraints simultaneously to produce a combined metric that reveals deficits not captured by either constraint alone, and because its framework is open-access, it’s ready to be extended for larger-scale access modeling across different contexts.
Kai: It seems like RadMaps offers a useful tool for planners and policymakers who need a comprehensive way to evaluate infrastructure planning decisions concerning where radiotherapy services are needed most urgently.
Mira: Ultimately, the paper provides a flexible framework that helps move beyond looking at capacity or distance in isolation by showing how they interact to create a more complete picture of access challenges.
Conclusion: Kai: So we've looked at how RadMaps models radiotherapy access by balancing capacity and geography across different spatial scales—from Resolution-three down to Resolution-seven—and now we're getting to the conclusion of this work.
Mira: The authors call this framework RadMaps, and they’re using a hexagonal grid based on Uber’s H3 system to map population density against cancer incidence and facility locations.
Lev: What they do is calculate three metrics: capacity only, geography only, and the combined metric that factors both constraints in together.
Kai: The main thing here is that this combined metric shows you where you have a real problem because it captures that compounding effect we talked about earlier.
Mira: It seems like the authors are showing how this one unified metric can reveal access deficits even when capacity and geography constraints look different on their own.
Lev: They found that in their global analysis, the combined metric ARM is sixty percent, which is lower than either of those standalone metrics you saw before.
Kai: So what does that mean for planning? It means you can't just focus on one constraint when trying to decide where to build a new facility or how to distribute existing ones.
Mira: It suggests that spatial mismatch is a critical factor, and if you only look at capacity, you miss the geographic hurdles and vice versa.
Lev: If we were building real hardware for this kind of modeling, we’d have to worry about the computational overhead of running that kind of spatial intersection across all those resolutions.
Kai: That's a fair point, Lev. But what this paper really suggests is that this framework is modular and extensible, so it’s a good starting point for mapping out access challenges everywhere.
Mira: It’s an open-source tool that healthcare planners and researchers can take and adapt for different regions or even different types of medical access.
Lev: Yeah, the authors mention they have limitations, like assuming uniform cancer incidence across all areas, which is a big assumption you have to keep in mind.
Kai: Exactly. So while this framework gives us a powerful way to visualize these problems together, we still need to be careful about those underlying assumptions when we apply it in the real world.
Mira: That's the takeaway for now: RadMaps proves that modeling capacity and geography simultaneously gives you a better picture of access limitations than looking at them separately.
Lev: It’s a solid foundation, but next, we need to look at how this kind of spatial modeling translates into actual operational decisions for deploying new medical technology.
More episodes
- 2611.14082-Two atoms with strong light-induced dipolar interactions
- 2611.14040-Characterization of BNLs 20 and 30 micrometer thick LGADs for the Electron Ion Collider
- 2611.13399-Lift-element-based dynamic network of vortex gust-airfoil interactions
- 2611.13476-Hopfion Superlattices in 3D Twisted Moir'e Light Fields
- 2611.13642-Investigation of the timing performance of double-sided p-type 3D silicon sensors produced by CNM
- 2611.13830-SiPM optical readout of a PICOSEC Micromegas precise timing detector
- 2611.14152-Where are the shortest-path nodes in spatial networks?
- 2611.14219-Sub-Ice: semi-automated mapping of basal channels from ice shelf surface elevation data
- 2611.16341-SUMNO: Spatially Unrolled Multigrid Neural Operator for Fluid Flow Surrogates
- 2611.16090-Multi-UTE Myelin Fraction Mapping: Repeatability and Cross-Field-Strength Reproducibility at 1.5T and 3T