Jacobi's principle of stationary full action and its implications
summary
The gist
The paper aims to extend the applicability of Jacobi's principle of stationary action to non-conservative natural systems and derive corresponding equations of motion.
In short
The paper extends Jacobi's principle of stationary action to non-conservative natural systems by varying the action with respect to both coordinates and time. This extension shows that Jacobi's principle is equivalent to modified Hamilton and Ostrogradsky actions, providing a new formulation for deriving equations of motion in systems with external fields.
Key concepts
- Jacobi's Principle
- A principle stating that the physical path taken by a system is one where the action functional is stationary. The authors extend this by allowing variation with respect to time as well as coordinates, making it applicable beyond conservative systems.
- Modified Hamilton and Ostrogradsky Actions
- These are alternative formulations of action that are shown to be mathematically equivalent to the extended Jacobi principle. This equivalence proves that Jacobi's method can be used successfully for non-conservative mechanical systems where external fields change over time.
- Natural Form of Motion
- The resulting equations derived from the stationary action principle define a 'natural form' of motion. These equations fix the trajectory and its schedule as a function of arc length, providing an intuitive and self-consistent description for complex systems.
Terminology used across episodes
This episode discusses
- Jacobi's principle of stationary full action and its implications · Paper Radio
- Trajectory equations for a non-conservative natural system
The paper
Jacobi's principle of stationary full action and its implications · Read on arXiv
В. В. Войтик
Башкирский государственный медицинский университет
The purpose of this article is to extend the applicability of the principle of stationary Jacobi action to non-conservative natural systems and to derive the equations of motion corresponding to this generalized principle. To this end, in addition to the well-known variation of the Jacobi action with respect to coordinates, we introduce an independent variation of time. Small variations in both coordinates and time are considered at points along the actual trajectory, subject to standard boundary conditions.
DOI: 10.14498/vsgtu2312
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Jacobi's principle of stationary full action and its implications".
Mira: Here's the gist of the paper. The paper aims to extend the applicability of Jacobi's principle of stationary action to non-conservative natural systems and derive corresponding equations of motion.
Kai: Pruning redundant reasoning tokens The core finding is that Jacobi's principle, when extended by varying the action with respect to time in addition to coordinates, leads to a set of equations that define the natural form of motion.
Mira: This extension demonstrates that Jacobi's principle is equivalent to modified Hamilton and Ostrogradsky actions, suggesting it can be used for non-conservative mechanical systems.
Kai: The extended principle is presented as the basis for an independent equivalent formulation of analytical mechanics.
Paper summary: Kai: So we’re looking at this paper now, "Jacobi's principle of stationary full action and its implications." It tackles extending the idea of Jacobi's principle to systems that aren't conservative, which is a big deal.
Mira: Right. The core claim here is that by varying the action not just with respect to coordinates but also with respect to time, you get a set of equations that define the natural form of motion for these non-conservative systems.
Lev: From my side, I'm curious about how this extension handles the external fields and metric tensor which are time-dependent in these systems. If we introduce a temporal variation, does that automatically resolve issues where the variation operator changes depending on the action form?
Kai: Exactly. The authors argue that for any complete action, the number of variations you get with respect to coordinates and time must line up if you want mathematical equivalence to hold >. It’s about making sure the different ways of finding an extremum result in the same physical description >.
Mira: And they claim this extended principle is equivalent to modified Hamilton actions and Ostrogradsky actions, which suggests Jacobi's principle isn't just for conservative stuff anymore, it can be used for non-conservative mechanical systems >.
Lev: From an engineering standpoint, if we use this as a basis for an independent formulation of analytical mechanics, how does that translate to running simulations on real hardware? We need to consider the overhead of these extra variations >.
Kai: The results from varying the action with respect to time actually yield a geometric form of a known theorem about how the kinetic energy changes for a natural system >. That’s one tangible result we can look at >.
Mira: And when you vary it with respect to coordinates, you get this second-order equation describing how the tangent vector evolves based on initial conditions, external fields, and the system's own properties >. It links the geometry of motion directly to what's happening in the environment >.
Paper summary: Lev: A second-order equation for a tangent vector sounds like a complex constraint to solve numerically. What are the constraints on those initial conditions they're talking about? Are we talking about specific boundary conditions or something more general >?
Kai: They state that the set of these equations, plus this first-order differential equation describing motion in configuration space, creates a system of s plus one second-order equations >. It’s a complete picture for defining the natural form of the law of motion >.
Mira: So, what this means for us is that solving this entire system gives you the actual trajectory and its schedule as a function of arc length >. That’s pretty direct physical output from the mathematical structure they've set up >.
Lev: If we have to fix a trajectory based on arc length using these equations, how does that compare to standard Lagrangian methods where we often parameterize by time or some other parameter that isn't necessarily arc length >?
Kai: The paper says this approach provides a natural parametrization of the trajectory and time, which makes it a self-consistent theory for studying motion in variable fields >. It’s about finding the right way to describe the path itself rather than just how it evolves over time >.
Mira: But we have to be careful about what this method doesn't do. The paper itself points out that applying Jacobi's principle to non-conservative systems requires this extra time variation, which is a specific condition that needs to be met for the equivalence to hold >.
Lev: And they also note that the derived set of equations, specifically equations seven point two and seven point four, are more complex than standard Lagrangian equations but they describe motion using this natural parametrization >. That complexity is something we have to account for in terms of computational cost on real hardware >.
Paper summary: Kai: It really settles the question of whether Jacobi's principle is restricted only to conservative systems by showing its equivalence with modified Hamilton and Ostrogradsky actions >. This opens up the possibility for using it in real-world mechanical systems that lose energy to dissipation or external forces >.
Mira: The theoretical significance here is establishing this equivalence across three different action forms, which implies Jacobi's method has a broader scope than previously thought for non-conservative mechanics >. It’s about unifying the description of natural motion regardless of the field type >.
Lev: For real hardware, if we are building error correction codes based on this framework, the fact that it gives us these specific trajectory equations means we have a defined target to compare our simulation output against >. That's valuable for validating our models >.
Kai: The practical significance is that it gives us a geometric and intuitive way to study natural systems in variable fields, presenting the results in this "natural form" which is crucial for applications >. It makes the physics more accessible when dealing with time-dependent environments >.
Mira: So, to wrap up, "Jacobi's principle of stationary full action and its implications" shows that by adding a time variation to Jacobi’s action, you get a robust framework for describing non-conservative motion through equivalent formulations >. It provides a self-consistent way to define trajectories based on arc length >.
Lev: And the limitation we see is that this method requires this specific temporal variation to work correctly, so if your system doesn't fit that structure, you won't get these natural forms of motion >. That’s a key caveat for implementation >.
Kai: And it really pushes us to think about how we can use these equations to model systems where the environment is constantly changing, not just static potentials >. Where does this leave things for future work on experimental setups like our superconducting qubits >?
Mira: It suggests that if we can map our experimental observables onto these natural equations, we might gain a clearer intuitive grasp of the underlying dynamics in complex quantum environments >. That’s where the theory meets the hardware challenge >.
Conclusion: Kai: So we're wrapping up on "Jacobi's principle of stationary full action and its implications." Basically, this paper shows that you can use Jacobi’s principle even when your system isn't perfectly conservative, by just adding a time variation to the action.
Mira: Right. The authors are essentially proving that this extended principle is mathematically equivalent to other known ways of defining motion, like Hamilton-Ostrogradsky actions.
Lev: It means we can use this Jacobi method for non-conservative stuff, which is important because most of our real systems have friction or external driving forces involved.
Kai: And the big implication is that they've derived a set of equations that describe the natural form of motion in configuration space.
Mira: That’s what they’re proposing—a self-consistent way to define a trajectory and its schedule based on arc length, which is super intuitive for experimental setups.
Lev: From an engineering standpoint, it means we get these specific equations that are analogous to the Lagrangian equations but using a natural parametrization of time and path.
Kai: But there’s a catch. The whole equivalence only holds if you vary the action both with respect to coordinates and with respect to time, which adds complexity.
Mira: Exactly. It’s not just adding one term; it’s about making sure that the number of variations you get from coordinate changes and time changes match up perfectly for the math to work out.
Lev: So, if you're building an error correction scheme based on this, you need to make sure your system fits this specific structure, or these natural equations won't give you the right results.
Kai: It moves us toward a new way of thinking about how we model motion in variable fields, not just static potentials.
Mira: And that opens up avenues for studying systems where the environment is constantly changing, like those superconducting qubits we’re working with.
More episodes
- 2611.14082-Two atoms with strong light-induced dipolar interactions
- 2611.14040-Characterization of BNLs 20 and 30 micrometer thick LGADs for the Electron Ion Collider
- 2611.13399-Lift-element-based dynamic network of vortex gust-airfoil interactions
- 2611.13476-Hopfion Superlattices in 3D Twisted Moir'e Light Fields
- 2611.13642-Investigation of the timing performance of double-sided p-type 3D silicon sensors produced by CNM
- 2611.13830-SiPM optical readout of a PICOSEC Micromegas precise timing detector
- 2611.14152-Where are the shortest-path nodes in spatial networks?
- 2611.14219-Sub-Ice: semi-automated mapping of basal channels from ice shelf surface elevation data
- 2611.16341-SUMNO: Spatially Unrolled Multigrid Neural Operator for Fluid Flow Surrogates
- 2611.16090-Multi-UTE Myelin Fraction Mapping: Repeatability and Cross-Field-Strength Reproducibility at 1.5T and 3T