Hyperbolic dynamic friction models for viscoelastic sliding and rolling contact
summary
The gist
This paper derives a unified viscoelasto-kinematic framework that describes sliding and rolling contact between viscoelastic bodies by combining linear viscoelastic rheologies with nonlinear dynamic…
In short
The paper develops a unified viscoelasto-kinematic framework to describe sliding and rolling contact between viscoelastic bodies. It combines linear viscoelastic rheologies with dynamic friction models into semilinear partial differential equations (PDEs). The key finding is that both sliding and rolling share closely related underlying dynamics, suggesting friction should be classified by material transport mechanisms rather than just constitutive laws.
Key concepts
- Viscoelasto-kinematic framework
- This is a mathematical structure combining linear viscoelastic rheology (how materials deform over time) with kinematic descriptions of contact. It creates a system of PDEs that governs how frictional forces, bristle deformations, and internal material states evolve at the interface between two contacting bodies.
- Hyperbolic Structure
- The derived PDE system exhibits a symmetric or symmetrisable hyperbolic structure. This means the equations behave like wave equations, allowing information (like force changes) to propagate along characteristic directions determined by the elastic interaction between bodies, which is crucial for understanding contact dynamics.
- Sliding vs. Rolling Dynamics
- The study shows that sliding and rolling friction are governed by the same fundamental principles within this framework. While sliding contact often yields finite-dimensional models, rolling contact preserves a fully distributed nature due to advection in both bodies, leading to distinct but related force-generation mechanisms.
- Passivity
- The system is shown to be passive, meaning mechanical energy is always dissipated at the interface. This dissipation is formalized by a storage function that accounts for both elastic energy stored in the material branches and energy lost through dissipative friction, ensuring physical consistency.
Terminology used across episodes
This episode discusses
- Hyperbolic dynamic friction models for viscoelastic sliding and rolling contact · Paper Radio
- First-order friction models with bristle dynamics: lumped and distributed formulations
The paper
Hyperbolic dynamic friction models for viscoelastic sliding and rolling contact · Read on arXiv
Linköping University · Eindhoven University of Technology
This paper considers the sliding and rolling contact between viscoelastic bodies. Combining linear viscoelastic rheologies for bristle-like elements with nonlinear dynamic friction models, and under the assumption of small deformations and displacement gradients, it derives a class of viscoelasto-kinematic equations, formulated as a system of semilinear partial differential equations (PDEs) governing the evolution of the frictional force, bristle deformations, and internal state variables at the interface between the contacting bodies. The resulting system is analysed mathematically, demonstrating that linear viscoelasticity preserves the hyperbolic character of the PDE systems typically encountered in rolling contact. The proposed theory is illustrated through representative examples of both sliding and rolling contact, highlighting that these two processes, whilst often treated as distinct, may in fact exhibit closely related underlying dynamics. Overall, the framework provides a general theoretical setting applicable to a broad class of viscoelastic frictional systems.
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: We're looking at the paper: "Hyperbolic dynamic friction models for viscoelastic sliding and rolling contact".
Mira: Here's the gist of the paper. This paper derives a unified viscoelasto-kinematic framework that describes sliding and rolling contact between viscoelastic bodies by combining linear viscoelastic rheologies with nonlinear dynamic friction models, demonstrating that these two processes share closely related underlying dynamics Core Theoretical Framework The central contribution is the derivation of a class of viscoelasto-kinematic equations formulated as a system of semilinear partial differential equations (PDEs) governing the evolution of frictional force, bristle deformations, and internal state variables at the interface between contacting bodies The resulting system is analyzed mathematically to show that linear viscoelasticity preserves the hyperbolic character of typical rolling contact PDE systems This framework provides a general theoretical setting applicable to a broad class of viscoelastic frictional systems, illustrating that sliding and rolling processes may exhibit closely related underlying dynamics Modeling Dynamic Friction The authors review various dynamic friction models, noting the distinction between finite-dimensional (ODE) models for sliding friction and partial differential equation (PDE) formulations for rolling friction They introduce a general structure for dynamic models as a system of equations governing bristle deformations and generated forces, where the time derivatives can be ordinary or material derivatives depending on advection Specific models reviewed include Dahl and LuGre models, FrBD models, and the Bouc-Wen model Viscoelastic Constitutive Laws The paper details linear viscoelastic rheological models, such as the Generalised Kelvin-Voigt (GKV) and Generalised Maxwell (GM) elements, which are cast in state-space form These models describe the rheology of bristle elements, and their extension to contact pairs is developed using these linear systems The internal state variables are collected into a vector R2n that dictates the evolution of bristle deformations and generated force Viscoelasto-Kinematic Derivation The viscoelasto-kinematic equations are derived by combining the rheological descriptions with established friction laws, resulting in a semilinear hyperbolic system describing the evolution of tangential contact forces and internal state variables The governing PDEs (30)-(35) are shown to be hyperbolic under assumptions of small deformations and displacement gradients A key finding is that the distributed or lumped character of friction dynamics emerges naturally from contact kinematics, unifying classical finite-dimensional and distributed formulations Hyperbolic Structure and Analysis The PDE system (33)-(35) retains a symmetric or symmetrisable hyperbolic structure under the assumptions of small deformations and displacement gradients Through a transformation into Riemann variables, the system is recast as an interconnection of transport equations propagating along characteristic directions determined by the elastic interaction between bodies This analysis confirms that linear viscoelasticity does not alter the fundamental hyperbolic character of frictional contact processes but enriches their constitutive behavior Application to Contact Problems The theory is applied to simple line contact problems, illustrating the close analogies between sliding and rolling friction For sliding friction, mixed distributed formulations arise naturally when both bodies are deformable, challenging the traditional association with finite-dimensional models For rolling contact, the presence of advection in both bodies preserves the fully distributed nature of the process and leads to force-generation mechanisms fundamentally different from those in sliding contact Passivity and Well-Posedness The system is shown to be passive, meaning mechanical energy is dissipated at the interface, formalized by a storage function W that accounts for elastic branch energy and dissipative branch energy The well-posedness of the hyperbolic PDE system in Riemann variables is established by invoking Theorem A.1 under appropriate assumptions on the coefficients and input velocities Future Directions The work opens directions for future research, including the incorporation of more advanced constitutive descriptions like nonlinear viscoelasticity and viscoplasticity, as well as the development of efficient numerical schemes for large-scale simulations Experimental validation on practical systems involving highly viscoelastic materials is also highlighted as a necessary next step Numerical Implementation The numerical method involves partitioning the spatial contact interval into uniform cells and solving the resulting finite-dimensional ODE system using an adaptive solver, with constraints on the maximum internal step size related to transport velocities Convergence studies confirm that the numerical implementation accurately reproduces analytical stationary solutions in both sliding and rolling cases The convergence order approaches 1 in the asymptotic refinement regime for both problems The transient analysis is performed via a coupled space-time refinement test to assess the accuracy of the solution The paper concludes that sliding and rolling friction should not be classified solely according to constitutive laws but also according to the kinematic mechanisms governing material particle transport through the contact region Finite-dimensional and distributed formulations represent different manifestations of the same underlying viscoelasto-kinematic structure The mathematical structure follows directly from contact kinematics, suggesting that no ad hoc distinction between sliding, rolling, or mixed rolling-sliding contact is required Final Synthesis Overall, the framework successfully unifies sliding and rolling friction by treating them under a common viscoelasto-kinematic description The introduction of linear viscoelasticity enriches the constitutive behavior without altering the fundamental hyperbolic character, while removing simplifying assumptions allows for applicability to a broader class of engineering contacts The results suggest that friction models should be classified by material transport mechanisms rather than just constitutive laws Technical Appendix Details Appendix A.1 investigates hyperbolicity in the case of a time-varying contact area, confirming that the hyperbolic character is preserved under appropriate assumptions Appendix A.2 proves the well-posedness of the hyperbolic PDE system (33)-(35) assuming time-invariant contact areas and velocities Appendix A.3 discusses extending the framework to non-coaxial elastic stiffness matrices, showing that symmetrisable hyperbolicity is maintained even without coaxiality assumptions Appendix B provides details on the FrBDn+1-GKV models, including their passivity proof under standard assumptions The numerical implementation details and convergence analyses are documented in Section C The results in Section 5 show that the steady-state response is governed by the elastic partition of deformation, while higher-order viscoelastic rheologies influence transient behavior and dissipation The analysis confirms that rolling contact preserves the fully distributed nature of the process due to advection in both bodies The analysis also shows that for constant velocities, existence and uniqueness properties are established by invoking Theorem A.1 The passivity result is formally established under Assumption 3.1, showing how energy stored in elastic and dissipative branches contributes to the total storage function W The numerical results show that as the number of dissipative branches increases, damping effects lead to spatial relaxation behaviors resulting in a reduced friction force at the interface The transient behavior of the total friction force is consistent with steady-state findings, where higher relaxation times lead to slightly faster convergence toward steady-state values The rolling contact force depends on three distinct arguments because the relative velocity is determined by kinematic differences between rolling and translational velocities due to dual advection mechanisms The system is well-posed for constant velocities by invoking Theorem A.1, but requires smoother conditions for classical solutions The energy stored in the elastic branches of the GKV elements can be expressed in terms of the transformed force variables using a transformation matrix P The final results show that even in the non-coaxial case, it is possible to restate the PDE system using a transformation that yields a real diagonal principal part The numerical convergence studies confirm convergence towards the expected first-order asymptotic regime for both sliding and rolling problems 1.
Kai: A unified viscoelasto-kinematic framework is derived, showing that sliding and rolling friction are governed by the same underlying principles.
Kai: The system is a symmetric or symmetrisable hyperbolic PDE system under small deformation and gradient assumptions 3.
Paper summary: Kai: So we’re looking at this paper right now called "Hyperbolic dynamic friction models for viscoelastic sliding and rolling contact". It’s by Luigi Romano and others. The main thing they're doing is combining linear viscoelastic rheologies with nonlinear dynamic friction models. They claim that this combination leads to a unified viscoelasto-kinematic framework.
Mira: That sounds like they’re trying to bridge the gap between different ways we model things, you know? Like how we treat sliding versus rolling contact. They're essentially showing that these two processes share closely related underlying dynamics because of this unified system.
Lev: So, if I’m hearing right, the paper is proposing a system of semilinear partial differential equations governing the evolution of frictional force and bristle deformations at the interface between two contacting bodies under small deformations and displacement gradients. That sounds like a lot to handle for real hardware.
Kai: Exactly. The core contribution is showing that linear viscoelasticity actually preserves the hyperbolic character of typical rolling contact PDE systems, which is something they think might not always be true in these models. They derive this system from combining the rheological descriptions with established friction laws, and it results in a semilinear hyperbolic system describing tangential contact forces and internal state variables.
Mira: The paper talks about how they review various dynamic friction models—things like Dahl and LuGre for sliding, or FrBD models for rolling—and they introduce a general structure where the time derivatives can be ordinary or material derivatives depending on advection. It’s interesting that they bring in those specific examples to show the common mathematical structure across them.
Lev: I wonder how much overhead this unified system actually lands on when you try to run it on real hardware, considering it’s a system of PDEs, not just ODEs? The paper mentions the internal state variables are collected into a vector R2n that dictates the evolution of bristle deformations and generated force.
Kai: Right, Lev. They also show that this PDE system retains a symmetric or symmetrisable hyperbolic structure under the assumptions of small deformations and displacement gradients. They transform it into Riemann variables, which shows it’s an interconnection of transport equations propagating along characteristic directions determined by the elastic interaction between bodies.
Paper summary: Mira: That's important because it confirms that linear viscoelasticity doesn't change the fundamental hyperbolic character of frictional contact processes; it just enriches the constitutive behavior. They apply this to simple line contact problems, and they find that for sliding friction, mixed distributed formulations arise naturally when both bodies are deformable, which challenges the traditional association with finite-dimensional models.
Lev: So they’re saying that for sliding friction, you can get distributed dynamics even when you think of it as a finite-dimensional ODE model? That’s a big conceptual shift for how we build error correction schemes.
Kai: Well, and then they look at rolling contact, where the presence of advection in both bodies preserves the fully distributed nature of the process, leading to force-generation mechanisms that are fundamentally different from those in sliding contact. This is what they mean by unifying them under a common viscoelasto-kinematic description.
Mira: The paper emphasizes that sliding and rolling friction should not be classified solely by constitutive laws but also by the kinematic mechanisms governing material particle transport through the contact region. They argue that finite-dimensional and distributed formulations are just different manifestations of the same underlying viscoelasto-kinematic structure.
Lev: So, what does this mean for implementation? If it’s governed by these PDEs, how do you handle the spatial discretization on a chip when you're building real hardware?
Kai: The paper includes numerical details where they partition the spatial contact interval into uniform cells and solve the resulting finite-dimensional ODE system using an adaptive solver. They confirm that the numerical implementation accurately reproduces analytical stationary solutions in both sliding and rolling cases.
Mira: They also proved that this system is passive, meaning mechanical energy is dissipated at the interface, formalized by a storage function W that accounts for elastic branch energy and dissipative branch energy. This passivity result is established under Assumption three point one.
Lev: Passivity sounds good for stability, but what about well-posedness? They invoke Theorem A.one to establish this for constant velocities, but they note it requires smoother conditions for classical solutions than just the basic assumptions they set out at the start of the analysis <ref:2606.09128#pg1>.
Kai: The paper notes that higher-order viscoelastic rheologies influence transient behavior and dissipation, while steady-state response is governed by the elastic partition. This tells us that if we only look at steady state, we can simplify things down to just elastic partitioning for sliding contact.
Paper summary: Mira: But for rolling contact, because of the advection in both bodies, the force generation mechanisms are distinct from sliding. It depends on three distinct arguments when you consider constant velocities because the relative velocity is determined by kinematic differences between rolling and translational velocities due to dual advection mechanisms.
Lev: So for hardware running this, if we’re aiming for high fidelity, we have to be careful about those smooth conditions they mentioned when invoking Theorem A.one for constant velocities <ref:2606.09128#pg1>. That's where the real overhead lands.
Kai: The work opens up directions for incorporating more advanced constitutive descriptions like nonlinear viscoelasticity and viscoplasticity in future research. They also stress that experimental validation on practical systems involving highly viscoelastic materials is a necessary next step before we can fully trust these models for engineering contacts, like tyre-road interaction or wheel-rail systems with compliant layers.
Mira: That’s the implication for the field: friction models should be classified by material transport mechanisms rather than just constitutive laws. It moves the focus from what the material *is* to how it *moves* through contact.
Lev: I see how this structure relates to error correction, because if we can describe sliding and rolling under one hyperbolic framework, it might allow us to design more efficient models for dynamic systems where transport is key.
Kai: That’s what they suggest—that the mathematical structure follows directly from contact kinematics, which suggests no ad hoc distinction between sliding, rolling, or mixed rolling-sliding contact is required. It’s about finding that common kinematic root.
Mira: So to wrap up this paper on "Hyperbolic dynamic friction models for viscoelastic sliding and rolling contact," it provides a general framework for modeling these two types of friction through viscoelasto-kinematic equations. It successfully unifies different friction models into a single PDE description, showing that sliding and rolling processes share closely related underlying dynamics.
Lev: The paper establishes that the resulting hyperbolic system is well-posed and exhibits passivity, giving us a physically grounded model applicable to complex engineering contacts.
Kai: We’re looking at this paper because it shows that even in the non-coaxial case, it’s possible to restate the PDE system using a transformation that yields a real diagonal principal part. That's pretty clean math for hardware design.
Conclusion: Kai: So, we’re wrapping up this paper now on "Hyperbolic dynamic friction models for viscoelastic sliding and rolling contact".
Mira: Basically, they’ve unified how we model sliding versus rolling friction into one big viscoelasto-kinematic description.
Lev: They show that the underlying dynamics are actually the same for both processes because of how material particles move through the contact region.
Kai: And they establish this whole system is symmetric or symmetrisable hyperbolic under small deformation and displacement gradient assumptions.
Mira: The big takeaway is that linear viscoelasticity doesn't mess up the fundamental hyperbolic nature of frictional contact, it just adds complexity to the constitutive behavior.
Lev: For us building hardware, this means we can treat these as systems governed by transport equations along characteristic directions determined by elastic interaction between bodies.
Kai: It’s a lot to take in, but it simplifies the classification of friction models because they show that finite-dimensional and distributed formulations are just different views of the same thing.
Mira: The authors argue that you shouldn't just look at what material the friction is made of, but how it moves through contact.
Lev: That’s a shift in focus for error correction because if we understand the kinematic transport better, we can build models that run on real hardware more reliably.
Kai: And they confirmed that the system is passive, meaning energy is always dissipated at the interface via a storage function W that tracks elastic and dissipative branches.
Mira: That passivity result holds under Assumption three point one, which tells us how energy stored in those elastic branches contributes to the total storage function W.
Lev: The numerical studies show convergence towards the expected first-order asymptotic regime for both sliding and rolling problems when we use adaptive solvers on a spatial grid.
Kai: It’s interesting because they noted that for sliding contact, higher-order viscoelastic rheologies mainly affect transient behavior and dissipation while steady state is governed by the elastic partition.
Mira: But for rolling contact, the advection in both bodies preserves the fully distributed nature of the process, leading to force mechanisms distinct from sliding.
Lev: That distinction between sliding and rolling force generation based on dual advection mechanisms is something we need to keep in mind when designing our control systems.
Kai: So, this paper suggests that friction models should be classified by material transport mechanisms rather than just constitutive laws.
Mira: It’s about finding that common kinematic root that links sliding and rolling friction together mathematically.
Lev: The next step is incorporating nonlinear viscoelasticity and viscoplasticity into this framework for more realistic scenarios.
More episodes
- 2611.14082-Two atoms with strong light-induced dipolar interactions
- 2611.14040-Characterization of BNLs 20 and 30 micrometer thick LGADs for the Electron Ion Collider
- 2611.13399-Lift-element-based dynamic network of vortex gust-airfoil interactions
- 2611.13476-Hopfion Superlattices in 3D Twisted Moir'e Light Fields
- 2611.13642-Investigation of the timing performance of double-sided p-type 3D silicon sensors produced by CNM
- 2611.13830-SiPM optical readout of a PICOSEC Micromegas precise timing detector
- 2611.14152-Where are the shortest-path nodes in spatial networks?
- 2611.14219-Sub-Ice: semi-automated mapping of basal channels from ice shelf surface elevation data
- 2611.16341-SUMNO: Spatially Unrolled Multigrid Neural Operator for Fluid Flow Surrogates
- 2611.16090-Multi-UTE Myelin Fraction Mapping: Repeatability and Cross-Field-Strength Reproducibility at 1.5T and 3T