Galerkin reduced order model for two-dimensional Rayleigh-B'enard convection

summary

The gist

Galerkin projection is used to build reduced-order models (ROM) for two-dimensional Rayleigh-Bénard (RB) convection with no-slip walls The coupled approach shows better agreement with DNS in terms…

In short

The study developed Galerkin reduced-order models (ROMs) for 2D Rayleigh-Bénard convection using a coupled approach, which outperformed uncoupled methods. These ROMs effectively capture mean vertical profiles and Nusselt number scaling with Direct Numerical Simulations (DNS), remain numerically stable without closure models, and accurately identify the transition to chaos in the system.

Key concepts

Galerkin Projection
This technique is used to create simplified mathematical models (ROMs) by projecting the full, complex governing equations onto a smaller set of chosen basis functions. In this study, it was applied using a coupled approach combining velocity and temperature components into a single basis.
Coupled ROM Approach
This strategy involves projecting the velocity and temperature equations onto one single orthonormal basis that includes both components. This method was found to be superior to uncoupled approaches because it better captures the nonlinear interactions between large-scale structures in the convection system.
Direct Numerical Simulation (DNS)
DNS is a high-fidelity computational method used as a benchmark for validation. It solves the full, complex equations of 2D Rayleigh-Bénard convection without any model reduction. The ROMs were compared against DNS results for mean profiles and scaling to prove their accuracy.
Transition to Chaos
This refers to the point where the fluid flow dynamics shift from predictable, repeating patterns (periodic) or slightly irregular patterns (quasiperiodic) into a highly complex, unpredictable state (chaotic). The study precisely identified this transition point in model C192 using tools like Poincaré sections and Lyapunov exponents.

Terminology used across episodes

This episode discusses

The paper

Galerkin reduced order model for two-dimensional Rayleigh-B'enard convection · Read on arXiv

Enrique Flores-Montoya, André V. G. Cavalieri

Aerothermals department, ITP Aero · Divisγao de Engenharia Aeroespacial, Instituto Tecnológico de Aeronática

In this work, Galerkin projection is used to build reduced-order models (ROM) for two-dimensional Rayleigh-Bénard (RB) convection with no-slip walls. We compare an uncoupled projection approach that uses separate orthonormal bases for velocity and temperature with a coupled formalism where the equations are projected onto a single basis combining velocity and temperature components. Orthonormal bases for modal projection are obtained as the eigenfunctions of the controllability Gramian of the linearized RB equations, eliminating the need for DNS snapshot databases required by traditional POD-based approaches. Various coupled and uncoupled ROMs with different numbers of modes are generated and validated against direct numerical simulations (DNS) over a wide range of Rayleigh numbers. One of the objectives is to determine their domain of validity as a function of the system dimension and the Rayleigh number. DNS and ROM results are compared in terms of mean vertical profiles, heat flux, flow structures, dynamical regimes and energy spectra. Crucially, unlike previous POD-based Galerkin models for thermal convection, these ROMs do not require closure models and remain numerically stable. The coupled approach shows better agreement with DNS in terms of mean vertical profiles and Nusselt number scaling. The capabilities of these models are exploited to conduct a detailed bifurcation analysis at Pr = 10 using Poincaré sections and Lyapunov exponents, precisely identifying the transitions between periodic, quasiperiodic, and chaotic states with significant reductions of computational cost.

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "Galerkin reduced order model for two-dimensional Rayleigh-B'enard convection".

Mira: Here's the gist of the paper. Galerkin projection is used to build reduced-order models (ROM) for two-dimensional Rayleigh-Bénard (RB) convection with no-slip walls The coupled approach shows better agreement with DNS in terms of mean vertical profiles and Nusselt number scaling These ROMs do not require closure models and remain numerically stable The coupled approach shows better agreement with DNS in terms of mean vertical profiles and Nusselt number scaling Model Development Strategies The study compares an uncoupled projection approach that uses separate orthonormal bases for velocity and temperature with a coupled formalism where the equations are projected onto a single basis combining velocity and temperature components The orthogonal bases for modal projection are obtained as the eigenfunctions of the controllability Gramian of the linearized RB equations, eliminating the need for DNS snapshot databases required by traditional POD-based approaches Two projection strategies are systematically compared: an uncoupled approach with independent modal bases for temperature and velocity, and a coupled approach with one single orthonormal basis that includes velocity and temperature components Validation Against Direct Numerical Simulations ROM simulations are compared to Direct Numerical Simulations (DNS) for model validation The comparison is performed in terms of mean vertical profiles, total heat flux, flow structures, bifurcation diagrams and energy spectra For the coupled ROMs C96–C384, a very good agreement with DNS results is obtained up to R = 23.4 (Ra = 40 000) The comparison between the two projection approaches reveals that coupled models show better performance than uncoupled ROMs giving more accurate results for the same truncation level Dynamical Regime Characterization A detailed bifurcation analysis is conducted at P r = 10 using Poincar´e sections and Lyapunov exponents to precisely identify the transitions between periodic, quasiperiodic, and chaotic states with significant reductions of computational cost The transition to chaos in model C192 is shown to occur at approximately R ≃ 87 The combination of Poincar´e sections and Lyapunov exponent analysis enabled precise identification of the transition to chaos at R ≃ 87 in model C192 Spectral Characteristics Analysis The power spectra comparison between DNS and ROMs is established using mode c48 for model C192 and mode a14 for model U192 Model C192 captures the amplitude and frequency of the three dominant peaks in the DNS spectrum at f ≃ 0.05, 0.25, and 0.45 The ROM spectrum exhibits two spurious peaks that do not correspond to frequency components present in the DNS signal Overall, these results indicate that Galerkin ROMs reproduce the main features of the nonlinear system dynamics and are promising candidates to serve as surrogates for the high-dimensional system in applications where a low computational cost is required The coupled projection strategy has been found to outperform the more conventional uncoupled approach suggesting that coupled modal bases better capture the nonlinear interactions between large scale structures These ROMs have proven to be numerically stable when integrated over large characteristic times, T = 104, at high Rayleigh numbers, R = 106 The combination of Poincar´e sections and Lyapunov exponent analysis enabled precise identification of the transition to chaos at R ≃ 87 in model C192 Appendix Details The derivation of the adjoint state matrix A+ is obtained by equating corresponding terms on both sides of the equation The expression for the inner product in the state space is given by eq.

Kai: (A3) with a weight matrix for the inner product defined as M = -∇2 0 0 γ2 The adjoint control matrix B+ is obtained by arranging these results into matrix form to yield B+ =

∂y 0 −ikx 0 0 γ2: The final product BB+ gives BB+ =

1 0 0 γ2: Key Findings on Scaling The DNS show that in 2D RB convection with no-slip walls the Nusselt number varies approximately as Nu ∝ R1/4 for 1 < R < 103 Both the uncoupled and coupled ROMs capture the scaling of the Nusselt number with the reduced Rayleigh number R over two orders of magnitude This indicates that they could be reliably used to predict the total heat flux across the fluid layer in heat transfer applications involving RB convection The choice of normalization is key for the stability of coupled ROMs following Soucasse et al.

34: With this scaling, the magnitude of dimensionless velocities remains nearly constant with Ra and of the same order as the temperature perturbations, u ∼ θ′ The DNS show that in 2D RB convection with no-slip walls the Nusselt number varies approximately as Nu ∝ R1/4 for 1 < R < 103 Numerical Stability and Robustness Both coupled and uncoupled ROMs maintain numerical stability up to R = Ra/Rac = 106 for integration times of T = 104 This numerical robustness is achieved without any explicit closure model, in contrast to previous POD-Galerkin studies for buoyancy-driven convection in cavities that required additional dissipation terms to prevent numerical blow-up The Galerkin ROMs are numerically stable and do not require closure models The system is integrated using an Adams/BDF method with automatic stiffness detection

15: Application Potential The capabilities of these models are exploited to conduct a detailed bifurcation analysis at P r = 10 using Poincar´e sections and Lyapunov exponents, precisely identifying the transitions between periodic, quasiperiodic, and chaotic states with significant reductions of computational cost These ROMs can serve as DNS surrogates over a wide range of Rayleigh numbers setting the stage for future applications in state observation, control and optimization The detailed bifurcation analysis presented below demonstrates that these ROMs reproduce the same route to chaos observed in DNS—periodic, quasiperiodic, and chaotic dynamics—as a function of the Rayleigh number These ROMs are promising candidates to serve as surrogates for the high-dimensional system in applications where a low computational cost is required The detailed bifurcation analysis presented below demonstrates that these ROMs reproduce the same route to chaos observed in DNS—periodic, quasiperiodic, and chaotic dynamics—as a function of the Rayleigh number References

1: E.

Kai: Bodenschatz, W.

Paper summary: Kai: So we just covered how the paper sets up this comparison between uncoupled and coupled projections for building these ROMs. The core thesis here is that using a single combined basis actually gives better results when you look at the mean vertical profiles and how the Nusselt number scales.

Mira: Exactly, it claims that this coupled approach is superior because it captures those large-scale flow structures more accurately, which is what matters for real applications.

Lev: What's interesting about the method they used to find those bases is that instead of needing huge databases from direct numerical simulations, they get the orthonormal bases from the eigenfunctions of the controllability Gramian of the linearized equations.

Kai: So they bypassed needing tons of DNS snapshot data, which is a big win for making these models practical for things like real-time control where you can't run a full simulation every time.

Mira: And this method works for both approaches, uncoupled and coupled, generating ROMs with different numbers of modes to check their domain of validity across a wide range of Rayleigh numbers.

Lev: The paper tests these against DNS over a wide range, and they show that the coupled models are better performing than the uncoupled ones for the same truncation level.

Kai: It really emphasizes that these ROMs can serve as good surrogates for full-order models because they accurately reproduce key physics like dominant flow structures and integral quantities, which is what you need for heat transfer applications.

Conclusion: Mira: Thinking about the title of "Galerkin reduced order model for two-dimensional Rayleigh-B'enard convection", this paper is essentially showing that you can build a manageable mathematical description of complex fluid motion without needing the full computational power.

Kai: It’s about taking a high-dimensional system, like this Rayleigh-Bénard convection, and reducing it to something computationally cheap, but the key finding is that coupling those variables helps you keep the physics right.

Lev: The implication for us in error correction research is that if we can build models like these that accurately capture dynamics across different states—periodic, quasiperiodic, chaotic—it opens up possibilities for state observers and real-time control of physical systems.

Mira: Right. And they show this model reproduces the same route to chaos you see in direct simulations as the Rayleigh number changes, which means we can use this model to predict how a system will behave before we actually run a massive simulation on it.

Kai: So, for anyone who just listens, the point is that these coupled ROMs are numerically stable over long integration times at high Rayleigh numbers, and they provide a way to get reliable predictions for heat flux scaling across two orders of magnitude in Rayleigh number.

Lev: The limitation they flag is that while two dimensions capture the essential dynamics of pattern formation, three dimensional effects can still be important if you need that extra detail.

Mira: That's the caveat—the model is excellent for capturing the core 2D physics, but if your application demands full three dee fidelity, you're still looking at a bigger challenge <ref:2504.02961#pg3>.

More episodes

← Home