From OpenSPIM to FlowSPIM: Enhancing the versatility of a light-sheet microscope through an iterative design process

summary

The gist

Light sheet microscopy is ideal for the 3D imaging of large biological specimens, yet systematic documentation on adapting microscope designs to diverse experimental requirements remains limited We…

In short

Researchers developed a modular light-sheet microscope through five iterative design generations to improve its versatility for diverse samples and conditions. Starting from a basic setup, they progressively added hardware like new lasers, filters, and an incubation chamber. This process culminated in FlowSPIM, a novel flow-based incubation technique for 3D tissue culture.

Key concepts

Light-sheet microscopy
A technique used to create three-dimensional images of large biological specimens by illuminating them with a thin plane of light. This allows for high-resolution imaging across thick samples, which is useful in biological research.
Iterative design process
A systematic approach where a system is built in stages, with each version addressing the shortcomings of the previous one. The researchers used this five-generation method to continuously improve optical performance and user ease.
FlowSPIM
The final outcome of the design process: a new flow-based incubation technique for 3D tissue culture. This technique enhances traditional light-sheet microscopy by incorporating fluid flow, making it more adaptable for different experimental needs.

Terminology used across episodes

This episode discusses

The paper

From OpenSPIM to FlowSPIM: Enhancing the versatility of a light-sheet microscope through an iterative design process · Read on arXiv

RITMO Centre for Interdisciplinary Studies in Rhythm, Time and Motion University of Oslo · Njord Centre Department of Physics University of Oslo · Hybrid Technology Hub Faculty of Medicine University of Oslo · Chemical Neuroscience Group Norwegian Centre for Molecular Biosciences and Medicine University of Oslo · Department of Mechanical Engineering Chalmers University of Technology 412 96 Göteborg Sweden · Wallenberg Wood Science Centre Chalmers University of Technology 412 96 Göteborg Sweden · Centre for Cancer Cell Reprogramming Faculty of Medicine University of Oslo · Department of Microbiology Oslo University Hospital Norway · Leibniz Institute of Photonic Technology Jena Germany · Institute of Physical Chemistry and Abbe Center of Photonics Friedrich-Schiller-Universität Jena Jena Germany

Light-sheet microscopy is ideal for the 3D imaging of large biological specimens, yet systematic documentation on adapting microscope designs to diverse experimental requirements remains limited. We present the iterative process used to design and build a modular light-sheet microscope and adapt it to different sample types and experimental conditions, including live and fixed zebrafish, Drosophila, and mouse gastruloids, as well as cellulose nanocrystals. Starting from a stripped-down OpenSPIM platform, we gradually made our microscope more versatile by adding hardware such as additional laser channels and optical filters, and new protocols for sample handling. In its final iteration, FlowSPIM is a new flow-based incubation technique for 3D tissue culture.

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "From OpenSPIM to FlowSPIM".

Mira: Here's the gist of the paper. Light sheet microscopy is ideal for the 3D imaging of large biological specimens, yet systematic documentation on adapting microscope designs to diverse experimental requirements remains limited We present the iterative process used to design and build a modular light-sheet microscope and adapt it to different sample types and experimental conditions In its final iteration, FlowSPIM is a new flow-based incubation technique for 3D tissue culture Iterative Design Process The paper documents the iterative design process for building a stripped-down light-sheet microscope and how it was subsequently built upon by implementing new hardware, such as additional laser lines, different optical filters, an incubation chamber, and new protocols for sample handling This process spans five generations of the setup The iterative design process is outlined across five generations, starting from the OpenSPIM platform in Generation 1, which was a simple SPIM with a single illumination laser without temperature or flow control Each subsequent generation addresses the limitations of the previous one to maximize optical performance, user-friendliness, and ease of laser alignment Optical System Evolution

Paper summary: Kai: So this paper is about a process they used to take an open system and turn it into something much more flexible for different kinds of biological work. It's titled "From OpenSPIM to FlowSPIM: Enhancing the versatility of a light-sheet microscope through an iterative design process".

Mira: Basically, the core idea is that while light sheet microscopy is great for three dee imaging, we don't have a clear way to systematically change a microscope design for totally different experiments <ref:2609.31115#pg1>.

Kai: Right. The paper describes this iterative process of building and adapting a modular light-sheet microscope over five generations. They start with OpenSPIM, which was just a simple SPIM setup with one laser, no temperature control or flow capabilities at all.

Lev: So they're talking about starting really basic and adding things step by step to make it more capable for different needs? That sounds like it could get bogged down in complexity if the steps aren't well managed.

Kai: Exactly. They show how they gradually improve the optical performance, making it easier to align lasers and filters for different setups.

Mira: The big claim is that this systematic process allows them to build something much more versatile, culminating in FlowSPIM, which is a new flow-based incubation technique for three dee tissue culture <ref:2609.31115#pg1>.

Lev: So they're not just showing us how to build one microscope, but how to design *any* microscope you need by following that iterative path.

Kai: It’s about making the hardware modular so you can swap out components based on what the sample or experimental condition requires. That’s why this matters for researchers who need specialized tools.

Mira: It moves beyond just having a working microscope to documenting *how* you systematically adapt one to handle different biological samples and conditions effectively.

Lev: From my side, I'm thinking about how much of that hardware change actually translates to real-world performance on actual lab equipment. How much overhead does adding those extra laser lines really land?

Conclusion: Kai: So looking at the full picture of "From OpenSPIM to FlowSPIM: Enhancing the versatility of a light-sheet microscope through an iterative design process", it’s about showing this step-by-step evolution.

Mira: The authors show how they moved from that very simple OpenSPIM platform through five generations, adding hardware like extra laser lines and incubation chambers along the way.

Lev: The implication is that this iterative design documentation helps everyone understand how to build and adjust these systems for specific needs instead of just throwing components together randomly.

Kai: It's about creating a framework for designing tools that can handle different biological scenarios, moving towards something like FlowSPIM which is a flow-based incubation technique for three dee tissue culture <ref:2609.31115#pg1>.

Mira: So the main point is that the process itself—the iterative design—is as important as the final machine because it provides the roadmap for adaptation.

Lev: For someone building real hardware, this documentation of generation by generation improvements is useful because it shows where those performance gains come from in terms of system complexity.

More episodes

← Home