Elasto-inertial transitions in viscoelastic flows through cylinder arrays
summary
The gist
Elasto-inertial transitions in viscoelastic flows through cylinder arrays explores how chaotic flow states arise in polymer solutions at lower Reynolds numbers than expected for Newtonian fluids…
In short
The study explored how chaotic flow states arise in polymer solutions passing through cylinder arrays at lower-than-expected Reynolds numbers. Using detailed simulations, researchers found a transition to elasto-inertial turbulence (EIT) driven by vortex shedding interacting with bulk flow. This suggests EIT can occur at lower kinetic energy levels than previously thought, potentially improving mixing efficiency.
Key concepts
- Elasto-inertial transitions (EIT)
- This is a chaotic flow state in polymer solutions that occurs when both elastic forces (due to polymer stretching) and inertial forces are important. It happens at lower Reynolds numbers than expected for simple fluids, leading to complex, turbulent behavior in the flow pattern.
- Ruelle-Takens-Newhouse route
- This describes the mathematical path a system takes when it moves from stable flow into chaos. In this paper, the transition to EIT follows this route after an initial sub-critical bifurcation, indicating a complex sequence of changes leading to chaotic motion.
- Two-slope energy spectra
- The simulation results show that the energy distribution in the flow has two different power laws (slopes). These slopes are caused by two distinct physical mechanisms operating at different time scales: one related to vortex shedding and another related to slow dynamics in the polymer wakes.
Terminology used across episodes
This episode discusses
- Elasto-inertial transitions in viscoelastic flows through cylinder arrays · Paper Radio
- Narwhals and their blessings: exact coherent structures of elastic turbulence in channel flows
- Early turbulence in viscoelastic flow past a periodic cylinder array
The paper
Elasto-inertial transitions in viscoelastic flows through cylinder arrays · Read on arXiv
Department of Mechanical and Aerospace Engineering, The University of Manchester
For dilute solutions of polymers, chaotic flow states can occur at lower Reynolds numbers than required for inertial turbulence in Newtonian fluids, offering the potential for increased mixing efficiency. These states may be promoted by the flow geometry, and in recent years, porous media have gained attention as a promising setting in which viscoelastic instabilities may be exploited, although studies have primarily been in the creeping flow regime. Cylinder arrays serve as a prototypical porous media, giving a controlled setting in which to investigate flow dynamics. Here we explore the transition to elasto-inertial turbulence (EIT) in cylinder arrays via detailed numerical simulations. With increasing elasticity, EIT is reached via an initial sub-critical saddle-node bifurcation from the Newtonian state and then follows a series of supercritical bifurcations, in a Ruelle-Takens-Newhouse route to chaos. This transition is driven by the interaction between vortex shedding in cylinder wakes, and the bulk flow between cylinders. Within the EIT regime, we observe an interaction between slow dynamics in cylinder wakes, and fast dynamics in channels between cylinders, leading to two distinct slopes in the energy spectra. At low Reynolds numbers arrowhead structures are present, but these are suppressed at higher inertia. In the present configuration, we find no direct connection between EIT and purely elastic instabilities.
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: We're looking at the paper: "Elasto-inertial transitions in viscoelastic flows through cylinder arrays".
Mira: Here's the gist of the paper. Elasto-inertial transitions in viscoelastic flows through cylinder arrays explores how chaotic flow states arise in polymer solutions at lower Reynolds numbers than expected for Newtonian fluids, offering potential for increased mixing efficiency.
Kai: Flow Dynamics and Transition Mechanism The study investigates the transition to elasto-inertial turbulence (EIT) in cylinder arrays using detailed two-dimensional numerical simulations across a range of Reynolds numbers and Weissenberg numbers.
Mira: EIT is reached via an initial sub-critical saddle-node bifurcation from the Newtonian state followed by a series of supercritical bifurcations, following a Ruelle-Takens-Newhouse route to chaos.
Kai: This transition is driven by the interaction between vortex shedding in cylinder wakes and the bulk flow between cylinders.
Paper summary: Kai: So to recap, this paper, "Elasto-inertial transitions in viscoelastic flows through cylinder arrays," explores how chaotic flow states can occur at lower Reynolds numbers than expected for a Newtonian fluid when dealing with polymer solutions.
Mira: The main claim is that these states—elasto-inertial turbulence or EIT—can be reached in cylinder arrays by moving through an initial sub critical saddle node bifurcation and then a series of supercritical bifurcations toward chaos, following the Ruelle Takens Newhouse route.
Lev: It’s important to note that they are using cylinder arrays as a model for porous media, which is a setting that researchers are very interested in because it’s where you might exploit viscoelastic instabilities for mixing and homogenization.
Kai: The mechanism driving this transition involves the interaction between vortex shedding in the cylinder wakes and the bulk flow between those cylinders. This leads to two different slopes in the energy spectra within the EIT regime.
Mira: The authors found no direct link between this elasto-inertial turbulence and purely elastic instabilities in this specific configuration they studied, which is a key point for understanding the origin of chaos.
Lev: That’s a good distinction to make because it helps separate what's happening due to the polymer stretching from what’s happening purely due to the elasticity of the fluid itself.
Kai: They found distinct flow regimes based on Re and Weissenberg number, showing steady flow at low Re and low Weissenberg number, periodic vortex shedding at higher Re but still low elasticity, and finally elasto-inertial turbulence for larger Weissenberg numbers.
Mira: For instance, they observed a chaotic state when the Reynolds number is one hundred and the Weissenberg number is one point nine or greater, showing a spanwise structure reminiscent of EIT in channels at that point.
Lev: So it’s not just one parameter that matters; you need both fluid elasticity and flow inertia to get into this chaotic regime, which makes sense for any real material system.
Conclusion: Kai: So looking at "Elasto-inertial transitions in viscoelastic flows through cylinder arrays," the authors are pointing out that chaotic flow can happen in these polymer solutions at lower Reynolds numbers than usually required for inertial turbulence.
Mira: In simple terms, this means that if you are designing a device or a flow system where you use these materials, you might be able to achieve better mixing efficiency with less external energy input than standard models predict.
Lev: From an engineering standpoint, the implication is that we might be able to design systems that exploit these instabilities for enhanced mixing and reaction kinetics in porous media.
Kai: The paper suggests we should focus on how vortex shedding interacts with wake oscillations because that’s what drives the two different energy spectrum slopes they found.
Mira: Ultimately, this work suggests a pathway to lower-energy mixing in these canonical porous geometries by exploiting these elasto-inertial transitions, provided you account for the specific physics of polymer solutions.
Lev: It really boils down to understanding how that interaction happens because that’s the mechanism you need to target if you want to build something functional based on this research.
More episodes
- 2611.14082-Two atoms with strong light-induced dipolar interactions
- 2611.14040-Characterization of BNLs 20 and 30 micrometer thick LGADs for the Electron Ion Collider
- 2611.13399-Lift-element-based dynamic network of vortex gust-airfoil interactions
- 2611.13476-Hopfion Superlattices in 3D Twisted Moir'e Light Fields
- 2611.13642-Investigation of the timing performance of double-sided p-type 3D silicon sensors produced by CNM
- 2611.13830-SiPM optical readout of a PICOSEC Micromegas precise timing detector
- 2611.14152-Where are the shortest-path nodes in spatial networks?
- 2611.14219-Sub-Ice: semi-automated mapping of basal channels from ice shelf surface elevation data
- 2611.16341-SUMNO: Spatially Unrolled Multigrid Neural Operator for Fluid Flow Surrogates
- 2611.16090-Multi-UTE Myelin Fraction Mapping: Repeatability and Cross-Field-Strength Reproducibility at 1.5T and 3T