Distributed Acoustic Fiber Sensing for Research Campuses and Large Scientific Infrastructures -- The Hamburg WAVE proto-network
summary
The gist
Distributed Acoustic Sensing (DAS) can be utilized on research campuses and in large scientific infrastructures to study environmental vibrations and reduce their impact on high-precision experiments…
In short
Researchers tested a distributed acoustic sensing (DAS) network over 12 km of fiber at a scientific facility to study environmental vibrations. The results showed DAS effectively creates dense sensor networks, allowing for high-resolution mapping of seismic waves and continuous monitoring of noise sources like power lines and vehicles. This technology can help scientists plan experiments better and mitigate disruptive vibrations.
Key concepts
- Distributed Acoustic Sensing (DAS)
- DAS uses existing telecommunication fiber optic cables to create a massive network of sensors. It measures tiny stretching or strain in the fiber caused by ground vibrations, effectively turning the entire cable into a dense seismic array for monitoring.
- Dark Fiber Utilization
- The study focused on using unused telecommunication fibers, known as 'dark fiber,' for DAS. This allows researchers to deploy a large number of sensors along a single fiber path without needing new infrastructure installation, making it cost-effective for large scientific projects.
- Vibration Source Identification
- The system can identify specific noise sources by analyzing the recorded strain data. By mapping where vibrations occur along the fiber and correlating them with known sources like power lines or vehicles, researchers can pinpoint the origin of unwanted noise in real-time.
Terminology used across episodes
This episode discusses
- Distributed Acoustic Fiber Sensing for Research Campuses and Large Scientific Infrastructures -- The Hamburg WAVE proto-network · Paper Radio
- Machine learning for gravitational-wave detection: surrogate Wiener filtering for the prediction and optimized cancellation of Newtonian noise at Virgo
- The International Linear Collider Technical Design Report - Volume 1: Executive Summary
The paper
Distributed Acoustic Fiber Sensing for Research Campuses and Large Scientific Infrastructures -- The Hamburg WAVE proto-network · Read on arXiv
Oliver Bolt, Luigia Cristiano, †Sandy Croatto, Dirk Gajewski, Erik Genthe, Oliver Gerberding, †Celine Hadziioannou, †Conny Hammerer, —Markus Hoffmann, ᵊKatharina-Sophie Isleif, Antonia Kieler, Charlotte M. Krawczyk, Regina Maass, Ingra Barbosa, Norbert Meyners, Reinhard Rading, ÜHolger Schlarb, †Roman Schnabel, ᵊWanda Vossius, Christopher Wollin
University of Hamburg · GFZ Helmholtz Centre for Geosciences · Deutsches Elektronen-Synchrotron (DESY) · TU Berlin · Helmut-Schmidt Universitat
Here, we demonstrate and investigate how Distributed Acoustic Sensing (DAS) can be utilized on research campuses and in large scientific infrastructures to study environmental vibrations and reduce their impact on high-precision experiments. We first discuss the potential of DAS in the context of particle accelerators, gravitational wave detection experiments and research campuses. Next, we present the results of our seismic measurement campaign conducted with our proto-network, which involved the probing of over 12 km of fiber, in May 2021. This campaign was conducted by the Hamburg WAVE initiative in Science City Hamburg Bahrenfeld and included DESY, the European XFEL, PETRA III and the University of Hamburg. Our proto-network confirms the ability to observe natural, anthropogenic, and infrastructural vibrations and how and where these couple into different parts of the heterogeneously set up fiber network. We also present results on a study of noise and motion coupling aspects of DAS probing double-redundant fiber loops in a unique environment, the European XFEL. Our results show that DAS can greatly benefit research campuses and large scientific infrastructures and they highlight the opportunities and challenges of implementing and operating such seismic networks.
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: We're looking at the paper: "Distributed Acoustic Fiber Sensing for Research Campuses and Large Scientific Infrastructures -- The Hamburg WAVE proto-network".
Mira: Here's the gist of the paper. Distributed Acoustic Sensing (DAS) can be utilized on research campuses and in large scientific infrastructures to study environmental vibrations and reduce their impact on high-precision experiments The authors present results from a seismic measurement campaign conducted with their proto-network, which involved probing over 12 km of fiber Their results show that DAS greatly benefits research campuses and large scientific infrastructures and they highlight the opportunities and challenges of implementing and operating such seismic networks DAS has emerged as a groundbreaking technology for establishing large N = O(103 −104) vibration sensor networks, leading to significant advancements in various geophysical and seismological experiments DAS devices measure the ground-motioninduced stretching of deployed glass fibers One promising application of DAS is the utilization of unused telecommunication fiber optic cables, known as “dark fiber” DAS converts an optic fiber into a dense seismic array with regularly spaced sensors along the fiber thus facilitating the coherent and spatially un-aliased recording of the seismic wavefield Studies focus on urban environments have examined the retrieval of signals created by anthropogenic activity Vibration sensor networks are also prominently studied and employed in the context of seismic and Newtonian noise suppression in ground-based gravitational wave detectors Proto-Network Campaign Setup The measurement campaign involved distributed acoustic sensing of 12.132 km of fiber, which formed redundant loops, with simultaneous use of two types of DAS interrogators The fiber was routed through ducts, outside cable-trays, cable-trays in the PETRA III experimental hall and below the tunnel floor and on cable-trays in the European XFEL tunnel The core of our distributed sensor network was formed by a combination of dedicated routed and previously unused telecommunication fibers Each fiber segment shown consisted of four fibers, two of which we spliced together such that we created two fiber loops that redundantly probed each segment in forward and backward direction The Silixa MK1 iDAS interrogator continuously recorded data along a 12.132 km long fiber between May 17th – 31st 2021, with a sampling rate of 1000 Hz After setting up the DAS interrogators we used GPS-localized hammer blows along the fiber path to geo-reference the interrogated fiber segments to map locations During the campaign about 60 Terabyte of raw data were acquired Observed Vibrational Phenomena The DAS measurements recorded high-resolution strain data that revealed clear seismic wave propagation patterns along the European XFEL The spectrogram in Fig.
Kai: 5 (a) shows the 200 Hz harmonic of the 50 Hz power line signal measured near a tranformer house Continuous vibrations, such as those produced by technical infrastructure, can be directly identified based on signal strength and spatial location The detection of vehicles using DAS is a known capability and can be measured and spatially resolved in our set up Self-Noise Characterization Here we investigate DAS self-noise within the European XFEL tunnel under both quiet and noisy conditions to assess signal dependencies and potential nonlinearities To estimate DAS self-noise, channels with the highest correlation are selected The residual noise observed after common-mode rejection is similar across both measurement conditions suggesting a predominantly linear response of the DAS system over the frequency range considered in this analysis Future Directions for Networks Immediate advances for such networks include low-latency methods for vibration source identification, capable of providing real-time source behavior and location, when the source can be geo-referenced within the network In the mid-term the identification of less stationary and more obfuscated, vibration sources on campus and in the infrastructures will become possible Notorious vibration sources that lead to undesired coupling in e.g.
Title and authors: Kai: So, summarizing the core of this paper, it’s about a specific seismic measurement campaign they ran in May of two thousand twenty-one on their campus in Science City Hamburg Bahrenfeld <ref:2511.17141#pg2>. They used this proto-network to measure various vibrations right there on campus and around the facilities.
Mira: And then they also described how they characterized the self noise of the DAS system itself while using it along the tunnel of the European XFEL facility. That part is pretty important for understanding what limits what we can actually measure with these systems.
Lev: What's interesting here is that they used a combination of dedicated routed fibers and previously unused telecommunication fibers to form their core network structure, creating those redundant loops along that twelve point one three two two kilometer path.
Kai: And they did some geo-referencing by using GPS-localized hammer blows along the fiber path to map where exactly those interrogated segments were located within the infrastructure. That’s how they tied the digital measurements back to a real physical location on campus.
Mira: The results showed clear seismic wave propagation patterns, and specifically, they saw something like the two hundred hertz harmonic of a fifty hertz power line signal measured near a transformer house. It shows that you can directly identify continuous vibrations from things like technical infrastructure based on how strong the signal is and where it's coming from.
Kai: And they also mentioned that detecting vehicles using DAS is something they are capable of, which means it’s not just about abstract seismic waves; it’s about identifying real, moving sources in the environment.
Lev: That moves this from just passive monitoring to active source identification, which is a big step for any real-world application where you need to know what is causing the noise in real time.
The paper's summary: Mira: Now let's look at what the authors suggest as improvements for these networks. They are looking at ways to make these systems better, especially concerning how fast we can identify a source and where it is located.
Kai: One major improvement they propose is implementing low-latency methods for vibration source identification. This would mean being able to give real time information about what the noise source is doing and exactly where it's coming from, provided the source can be geo-referenced within the network.
Lev: Real time identification sounds like it would require a lot of processing power on the fly, so we have to consider how much overhead that puts on our systems when trying to run this on real hardware for something like a gravitational wave detector.
Mira: Then there’s the mid-term goal, which is identifying less stationary and more obfuscated vibration sources located across campuses and infrastructures. They envision that with better coverage, we can tackle those notorious vibration sources that cause unwanted coupling in things like experimental setups.
Kai: And another improvement they look at is automated noise characterization of the DAS self noise itself. They want to assess the system's limitations under both quiet and noisy conditions to understand the nonlinearities of the system.
Lev: That’s smart because understanding where the signal breaks down is crucial for building robust error correction schemes, because you have to know exactly what those frequency bands can handle before you try to rely on them.
The paper's improvements: Mira: So we've covered the setup and the results, and now we’re looking at where they are heading with these improvements. The paper "Distributed Acoustic Fiber Sensing for Research Campuses and Large Scientific Infrastructures -- The Hamburg WAVE proto-network" points toward low latency source tracking, mid-term source characterization in complex environments, and better self noise analysis.
Kai: It’s about turning this sensing capability into a tool that can actually help experimenters plan their experiments more effectively by comparing the data they get with the actual vibration environment at that moment.
Lev: From my side, it feels like the biggest hurdle for realizing these improvements is making those low latency methods practical enough to run on real hardware without introducing too much noise into the system itself.
Kai: And for me, it’s about how we can get a clearer picture of what’s happening at the quantum level or near it, knowing that we have this kind of high resolution environmental monitoring available to help us filter out those environmental disturbances.
Mira: In short, this work shows how repurposing existing fiber infrastructure can create dense sensing networks for studying vibration propagation in places like research campuses and large scientific facilities. It’s about using unused resources to get a better look at the physical world around our experiments.
Lev: This paper lays out a path toward making these distributed sensing systems more useful by focusing on source identification and system noise characterization, which are the two critical steps for moving from a prototype like this WAVE network to something that could genuinely mitigate noise in high precision experiments.
Conclusion: Kai: So to wrap up this paper, we’re looking at how they set up this distributed acoustic sensing network called the Hamburg WAVE proto-network for research campuses and large scientific infrastructures.
Mira: They showed how probing twelve point one three two two kilometers of fiber could detect vibrations across that whole path.
Lev: And they characterized the self noise of the DAS system itself, which is important to know for any real hardware implementation.
Kai: The results showed clear seismic wave propagation patterns along the European XFEL, like seeing that two hundred hertz harmonic from a fifty hertz power line signal near a transformer house.
Mira: They also highlighted how you can directly identify continuous vibrations from things like technical infrastructure based on signal strength and where it’s coming from.
Lev: And they confirmed that detecting vehicles using DAS is something they can do, which means it's not just abstract seismic waves; it’s about identifying real, moving sources in the environment.
Kai: They investigated the self noise under both quiet and noisy conditions and found that after common-mode rejection, the residual noise was similar across those two measurement states.
Mira: That suggests a predominantly linear response of the DAS system over those frequency ranges they looked at.
Lev: It’s good to see that linearity holds up even when things get a little noisy, because that simplifies how you think about filtering and noise suppression when you try to run this on actual hardware.
Kai: The future directions involve low latency methods for identifying vibration sources in real time, so you could get immediate behavior and location information if the source is geo-referenced within the network.
Mira: And they also mentioned mid-term goals where they think identifying less stationary and more obscured vibration sources on campuses will become possible.
Lev: That’s the practical side; getting those specific sources mapped out in a complex infrastructure is where this technology really gets its utility for things like noise suppression in gravitational wave detectors.
Kai: So, the Hamburg WAVE proto-network shows how using unused telecommunication fiber can create dense seismic arrays for studying environmental vibrations.
Mira: It proves that this approach has real potential for helping scientists plan experiments more effectively by comparing data with the vibration environment at the time of measurement.
Lev: And understanding those limitations in self noise characterization is key to building systems that actually work reliably when you take them out of a controlled lab setting.
Kai: That’s what they did in their paper, "Distributed Acoustic Fiber Sensing for Research Campuses and Large Scientific Infrastructures -- The Hamburg WAVE proto-network."
Mira: It opens up the idea that we can use existing fiber infrastructure to create large networks for sensing ground motion and environmental noise.
Lev: We should keep an eye on how those low latency identification methods evolve, because that’s where the real impact for things like noise mitigation will land.
More episodes
- 2611.14082-Two atoms with strong light-induced dipolar interactions
- 2611.14040-Characterization of BNLs 20 and 30 micrometer thick LGADs for the Electron Ion Collider
- 2611.13399-Lift-element-based dynamic network of vortex gust-airfoil interactions
- 2611.13476-Hopfion Superlattices in 3D Twisted Moir'e Light Fields
- 2611.13642-Investigation of the timing performance of double-sided p-type 3D silicon sensors produced by CNM
- 2611.13830-SiPM optical readout of a PICOSEC Micromegas precise timing detector
- 2611.14152-Where are the shortest-path nodes in spatial networks?
- 2611.14219-Sub-Ice: semi-automated mapping of basal channels from ice shelf surface elevation data
- 2611.16341-SUMNO: Spatially Unrolled Multigrid Neural Operator for Fluid Flow Surrogates
- 2611.16090-Multi-UTE Myelin Fraction Mapping: Repeatability and Cross-Field-Strength Reproducibility at 1.5T and 3T